INSULATING COMPOUND KI

INSULATING COMPOUND KIT,ELECTRICAL
INSULATING COMPOUND KIT, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
UNIT OF ISSUE = POUND (LB), ONE LB EQUATES TO A 1-POUND KIT CONSISTING
OF: ONE 1-LB CAN RTV-3120 BASE AND ONE 0.1-LB TUBE OF RTV-3010-S
CATLYST.
EXCEPTION TO THE REQUIRED NUMBER OF MONTHS / QUARTERS REMAINING ON THE
TOTAL SHELF-LIFE UPON RECEIPT BY THE FIRST GOVERNMENT ACTIVITY IS
REDUCED FROM 85 PERCENT TO 50 PERCENT ON THIS KIT.
CRITICAL APPLICATION ITEM
SPE4A0-26-T-4268
SECTION B
DOW SILICONES CORPORATION 71984 P/N RTV-3120 + RTV-3010-S
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017808303 0001 LB 1.000
NSN/MATERIAL:5970002536021
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW NSN PACKAGING REQUIREMENTS, THEN MARKED IAW MIL-STD-129. PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT. CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH BOXED KIT MUST CONTAIN A CONTENTS LIST CONSISTING OF COMPONENT PART NSNS, PART NUMBER AND QUANTITY PER KIT. BOX SHALL BE MARKED AND BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
FY3212
FY3212 AF DLA DIST OKC KO
CP 405 739 2481
SPE4A0-26-T-4268
SECTION B
PR: 7017808303 PRLI: 0001 CONT’D
7959 5TH ST DR 17 BLDG 16
TINKER AFB OK 73145-9156
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FY3212
FY3212 AF DLA DIST OKC KO
CP 405 739 2481
7959 5TH ST DR 17 BLDG 16
TINKER AFB OK 73145
US
M/F: (TCN) FB203762170037
RDD: 777
PROJ: TP 1
SUPP ADD: FY3212 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/10/2026
SPE4A0-26-T-4268 NSN/Part Number: 5970-00-253-6021 Quantity: 1 LB Purchase Request: 7017808303QTY: 1 Delivery: 5 days ADO