INSULATING COMPOUND KI

INSULATING COMPOUND KIT,ELECTRICAL
INSULATING COMPOUND KIT, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
UNIT OF ISSUE = KIT (KT), ONE KT EQUATES TO A NET WT 2-LB CAN OF RESIN
AND A NET WT 4-OZ BOTTLE OF CATALYST PACKAGED TOGETHER IN A 1-GALLON
PAIL.
UN2320: PACKAGING GROUP III
PROPER SHIPPING NAME: TETRAETHYLENEPENTAMINE SOLUTION
HAZARD CLASS: 8
SPE7M0-26-T-097Z
SECTION B
NATIONAL STARCH AND CHEMICAL CO 04552 P/N 2651 MM WITH CATALYST 9
HENKEL US OPERATIONS CORPORATION 33564 P/N 2651 MM WITH CATALYST 9
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018420982 0001 KT 1.000
NSN/MATERIAL:5970011194549
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
"PRESERVATION & PACKAGING SHALL BE
I/A/W THE LATEST REVISION OF MILITARY
SPECIFICATION MIL-STD-2073-1 APPENDIX D,
FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF
COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW
NSN PACKAGING REQUIREMENTS, THEN MARKED
IAW MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX,
ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE
TO CONTENTS OF KIT.
CONTENTS MUST BE CUSHIONED AS NECESSARY TO
PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH
BOXED KIT MUST CONTAIN A CONTENTS LIST
CONSISTING OF COMPONENT PART NSNS, PART NUMBER
AND QUANTITY PER KIT. BOX SHALL BE MARKED AND
BAR CODED IAW MIL-STD-129.
SPE7M0-26-T-097Z
SECTION B
PR: 7018420982 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
N4523A
PUGET SOUND NAVAL SHIPYARD IMF
1400 FARRAGUT AVE
BREMERTON WA 98314-5001
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N4523A
PUGET SOUND NAVAL SHIPYARD IMF
MAINT FAC REC OFFICER BLDG 514
1400 FARRAGUT AVE
BREMERTON WA 98314-5001
US
M/F: (TCN) N4523A6258V523
RDD: 278
PROJ: LO TP 1
SUPP ADD: Y997N SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: 24 FC: F3
Need Ship Date:00/00/0000 Original Required Delivery Date:09/18/2026
SPE7M0-26-T-097Z NSN/Part Number: 5970-01-119-4549 Quantity: 1 KT Purchase Request: 7018420982QTY: 1 Delivery: 5 days ADO