This Solicitation opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
INSULATION BLANKET,
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of nine insulation blankets, cabin aircraft, with part number 724E4121-14 revision C, issued under solicitation SPE4A7-26-T-632U as a total small business set-aside under NAICS code 336413. Delivery is required 319 days after order award, with a need ship date of July 3, 2027, and an original delivery date of August 22, 2027, under FOB origin terms to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is designated as a critical application with approved sources limited to Boeing Helicopter Co. CAGE 77272 and Triumph Interiors CAGE 5SW75; any new manufacturer must generate a custom template based on the actual aircraft and successfully pass a first article fit check without government-provided templates, and a source approval request is mandatory for any alternate source. The product must comply with the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951, and packaging must adhere to MIL-STD-129 with palletization per RP001. Inspection and acceptance occur at origin using FAR 52.246-2, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 under a zero-defect acceptance standard unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The manufacturer’s inspection system must comply with ISO 9001:2015 or an equivalent standard, and the use of additive manufacturing is prohibited. The contractor must submit a Safety Data Sheet meeting 29 CFR 1910.1200(g) and Federal Standard No. 313 prior to award, and must register with DLA’s AMPS system to access the Vendor Shipment Module. All packaging must be properly marked, including hazardous material labeling per Hazard Communication Standard, and government identification must be removed from non-accepted supplies. Compliance with applicable FAR and DFARS clauses is required, including those related to cybersecurity, whistleblower rights, export control, prohibited materials such as hexavalent chromium, and Buy American requirements. Payment and invoicing must be processed electronically through W
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
INSULATION BLANKET, CABIN, AIRCRAFT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BOEING HELICOPTER CO, CAGE 77272 SCD AV724E4121-14 REV "C" P/N
724E4121-14 APPROVED SOURCE: TRIUMPH INTERIORS,CAGE 5SW75 ANY NEW MFG
MUST GENERATE TEMPLATE FOR BLANKET AGAINST ACTUAL AIRCRAFT AND PASS
FIRST ARTICLE FIT CHECK. TEMPLATE WILL NOT BE PROVIDED BY THE GOVT. SAR
REQUIRED FOR ANY ALTERNATE SOURCE.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 77272 P/N 724E4121-14
AAR COMPONENT SERVICES HOT SPRINGS, 059S2 P/N 724E4121-14
SPE4A7-26-T-632U
SECTION B
TDP Rev B Gen 2 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017739661 0001 EA 9.000
NSN/MATERIAL:1680015592036
DELIVERY (IN DAYS):0319
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
SPE4A7-26-T-632U
SECTION B
PR: 7017739661 PRLI: 0001 CONT’D
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/03/2027 Original Required Delivery Date:08/22/2027
SPE4A7-26-T-632U NSN/Part Number: 1680-01-559-2036 Quantity: 9 EA Purchase Request: 7017739661QTY: 9 Delivery: 319 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS