This Solicitation opportunity from Department Of Defense was posted on May 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

INSULATION BLANKET,

Closed

SPE4A6-26-T-71F4Federal

Submission Closed06/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A5-26-T-404W

This contract is for the procurement of six units of the 4th Compressor Vane Assembly, identified by NSN 2835-00-555-7595 and Rolls-Royce part number 6876104. The order is managed by the Department of Defense under solicitation SPE4A5-26-T-404W, with a required delivery date of September 2, 2026, and a delivery timeframe of five days after receipt of order. Shipping is set as FOB Origin, with the final destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Key compliance measures include the prohibition of intentionally added mercury, the use of zero-based sampling plans for quality assurance, and the application of covered defense information protocols. Item Unique Identification is not required for this specific order.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26RN

This contract is a solicitation for one Retainer Tool, identified by NSN 2835-01-142-8584, for the Department of Defense. The procurement specifies a delivery timeframe of five days after order and requires the item to be delivered FOB Origin to the Fleet Support Center at Naval Station Mayport, Florida. The tool must adhere to technical specifications based on General Electric Company drawing 2C6968 Revision E and is associated with suggested sources such as McCay Tool and Engineering Company and Rhinestahl Corporation. Compliance requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. A critical mandate prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots unless otherwise specified. Shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26QE

This contract is for the procurement of three sensor assemblies, identified by NSN 2835014478086 and Woodward Inc. part number 6065-106. The items are designated as critical application items and must be delivered within five days of order. Delivery is FOB Origin, with inspection and acceptance also occurring at the origin. The shipping destination is the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required unless otherwise specified. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements such as those found in batteries or sensors as specified by NAVSEA.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

28--LOCKING LUG ASSEMBL

Solicitation # SPE4A5-26-T-419M

Solicitation SPE4A5-26-T-419M is a Request for Quotations issued by the Department of Defense, specifically the DLA Aviation ASC Supplier Oper OEM Division, for the procurement of 35 Locking Lug Assemblies (NSN 2835011179139). The approved source for this item is 07482 9211M83G25. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by September 18, 2026. The procurement falls under NAICS code 333611 and requires compliance with the Buy American Act and the Berry Amendment for quotes exceeding the micro-purchase threshold. The delivery is scheduled for DLA Distribution San Diego with a need ship date of March 1, 2027, and an original required delivery date of September 15, 2027. The delivery period is 163 days, and the terms are FOB Origin, with both inspection and acceptance occurring at the origin. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. This solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and prohibitions on the use of additive manufacturing unless specifically authorized.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

28--SEAL,METALLIC,SPECI

Solicitation # SPE4A6-26-U-4146

Solicitation SPE4A6-26-U-4146 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of specific metallic seals under NSN 2835014622707. This is a total small business set-aside under NAICS code 333611. The procurement is structured as a unilateral simplified indefinite-delivery contract with a maximum value of 350,000.00 and a term of one year. While the estimated annual demand is 198 units, the guaranteed minimum quantity is 19 units, with an expected average of four orders per year. Delivery is required within 112 days, with shipping to various CONUS and OCONUS DLA depots under FOB Origin terms. The award will be granted to a responsible offeror based on the price quoted for the estimated annual demand. Quality requirements mandate that the manufacturer's inspection system comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with inspection and acceptance occurring at the destination. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 standards. All quotes must be submitted electronically via the DIBBS portal by September 25, 2026. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessments. Payment and invoicing will be processed through the Wide Area Workflow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Axial Fan Impeller (PN: 4140-01-322-8129)

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Transmission Part P/N 29507751

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Gear Slip Rings (NSN 7018271208)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Lifting Device (Gear Assembly)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Differential Gearbox Fabrication and Assembly

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-402S

Solicitation SPE4A5-26-T-402S is a fixed-price request for quotations issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of one Cap Assembly, identified as a critical application item. The required part is manufactured by Honeywell International Inc. (P/N 695332-1, NSN 2835009082527). Delivery is required within 20 days after receipt of order, with an original required delivery date of September 4, 2026. The item is to be delivered FOB Origin to the Parts-Attach General Depot Tainan Branch Warehouse in Taiwan. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the point of origin. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances. Administrative requirements include the use of Wide Area WorkFlow (WAWF) for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing restrictions, and the prohibition of additive manufacturing unless specifically authorized.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-420E

Solicitation SPE4A5-26-T-420E is a request for quotations issued by DLA Aviation for the procurement of 38 filter elements under NSN 2840016725649. The required supplies must match part number ACC635F83 from either Pall Aeropower Corporation or Parker-Hannifin Corporation. Delivery is specified as FOB Origin with a delivery period of 170 days, a need ship date of March 8, 2027, and an original required delivery date of September 3, 2027. The items are to be delivered to DLA Distribution Cherry Point in North Carolina, where both inspection and acceptance will take place. The contract incorporates strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Sampling must comply with MIL-STD-1916 or ASQ H1331, and the contractor must adhere to the DLA Master List of Technical and Quality Requirements, specifically RA001, RQ011, and RQ017. While item unique identification is not required, the contractor must provide safety data sheets for any hazardous materials per 29 CFR 1910.1200(g). Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity regulations.

ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

The contract is for the procurement of 18 thermal insulation blankets, nonaircraft engine, identified by NSN 2835-01-513-6237 and part numbers L31902P01 and 42S30721-1 from General Electric Co. and Tighitco Inc., respectively. Delivery is required FOB origin within 164 days after award, with a need ship date of November 15, 2026, and an original required delivery date of December 4, 2026. The item is delivered to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), and the material has no shelf life requirement. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special marking code 00-00 indicating no additional special markings. Palletization must comply with DLA Packaging Requirements RP001, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, packing, and marking per IP056, with exceptions only for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents under NAVSEA guidelines. Bare item marking per RQ017 is required, and inspection and acceptance are conducted at origin. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based sampling, with critical, major, and minor attributes assigned verification levels VII, IV, and II (AQLs 0.1, 1.0, 4.0) respectively. All supplies must conform to the referenced drawings and the DLA Master List of Technical and Quality Requirements identified by R and I numbers, with revisions controlled by the solicitation issue date or amendment date. Contract administration is governed by FAR and DFARS clauses, including inspection under 52.246-2, changes under 52.243-1, and cybersecurity requirements under 252.240-7997 and 52.240-93. Invoicing must be submitted via W

General Info

Procurement of 18 insulation blankets for non-aircraft engines, MIL standards, no mercury, 164-day delivery.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-71F4 DLA Aviation May 27 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 26

Solicitation

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Ashley Jones

contact@example.gov

+1 (555) 000-0000

Full Description

INSULATION BLANKET,
INSULATION BLANKET, THERMAL, NONAIRCRAFT ENGINE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
THE TECHNICAL/QUALITY/TEST REQUIREMENTS FOR
SPE4A6-26-T-71F4
SECTION B
CITED P/N WILL BE IN CONFORMANCE WITH
THE LISTED DRAWING.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
GENERAL ELECTRIC CO.
CAGE 07482
P/N L31902P01 REVISION "A" DTD 88-08-09
TIGHITCO, INC. (CAGE 22013)
P/N 42S30721-1 IDENTIFY TO:
CRITICAL APPLICATION ITEM
TIGHITCO INC. 22013 P/N 42S30721-1
GENERAL ELECTRIC COMPANY 07482 P/N L31902P01
IAW BASIC DRAWING NR 1X4F3 AMSCBDOC
REVISION NR DTD 03/07/2007
PART PIECE NUMBER: L31902P01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016849352 0001 EA 18.000
NSN/MATERIAL:2835015136237
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
SPE4A6-26-T-71F4
SECTION B
PR: 7016849352 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:11/15/2026 Original Required Delivery Date:12/04/2026
SPE4A6-26-T-71F4 NSN/Part Number: 2835-01-513-6237 Quantity: 18 EA Purchase Request: 7016849352QTY: 18 Delivery: 164 days ADO