Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSULATION SLEEVING

Active
SPE4A6-26-T-15BBFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 28 units of electrical insulation sleeving, identified by NSN 5970-99-652-3468. The requirement specifies parts from Indra Sistemas, Tyco Electronics Raychem GmbH, or Tyco Electronics UK Ltd. Delivery is required within 43 days after the order, with a need ship date of September 8, 2025, and an original required delivery date of December 13, 2026. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Inspection and acceptance will take place at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract allows for no quantity variance.

General Info

Procure 28 electrical insulation sleeving units for DLA Distribution San Joaquin, California.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-15BB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Ernest Penrose
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATION SLEEVING
INSULATION SLEEVING,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
INDRA SISTEMAS, SOCIEDAD ANONIMA 0177B P/N 956000850-01
TYCO ELECTRONICS RAYCHEM GMBH D1973 P/N ATUM 19/6 -0
TYCO ELECTRONICS UK LTD K1010 P/N ATUM 19/6 BLACK
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017837268 0001 EA 28.000
NSN/MATERIAL:5970996523468
DELIVERY (IN DAYS):0043
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A6-26-T-15BB
SECTION B
PR: 7017837268 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:09/08/2025 Original Required Delivery Date:12/13/2026
SPE4A6-26-T-15BB NSN/Part Number: 5970-99-652-3468 Quantity: 28 EA Purchase Request: 7017837268QTY: 28 Delivery: 43 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
DISTRIBUTION BOX
Solicitation # SPE7M2-26-Q-0738
This contract is for the procurement of seven distribution boxes, identified by NSN 6110-01-571-7654 and part number 0457-6028 from Kongsberg Maritime Inc. The delivery is required within 161 days after the order is placed, with the final destination and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The solicitation is set aside for Service-Disabled Veteran-Owned Small Businesses. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements, MIL-STD-129 marking, and NAVAIR aircraft launch and recovery equipment traceability. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements and ensure all bare item markings include the contract number, NAWC CAGE, and part number.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-15BM
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
Federal
ARMOUR T-LINE HARDWARE RESTOCKThe Western Area Power Administration, under the U.S. Department of Energy, has issued a forecast for a hardware restock requirement under the ARMOUR T-LINE HARDWARE RESTOCK solicitation, targeting small businesses as part of an SBA set-aside program. The North American Industry Classification System code 335932 indicates the procurement relates to other electrical equipment and component manufacturing, suggesting the need for specialized electrical hardware components, likely for infrastructure maintenance or upgrades. The place of performance is specified as Nebraska, and the opportunity is designed to support small business participation through designated set-aside provisions. Two Small Business Program Managers, reachable via tetrault@wapa.gov and setzel@wapa.gov, serve as the primary points of contact for inquiries regarding this forecast. Although no solicitation number or exact award date is provided, the posting date of August 10, 2026, indicates this is a forward-looking acquisition forecast intended to prepare vendors and ensure small business readiness. The lack of detailed location or organizational office information suggests this is a preliminary notice, with additional procurement details expected to follow in a future formal solicitation. Potential vendors should monitor official channels for updates and ensure their business classifications align with the SBA small business criteria for NAICS code 335932.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
Federal
LINE HARDWARE & 345KV CORONA RINGSThe Western Area Power Administration, under the Department of Energy, has issued a forecast for line hardware and 345kV corona rings anticipated for procurement in the near future. The procurement is classified under NAICS code 335932, which pertains to other electrical equipment and component manufacturing, indicating the specialized nature of the products required. Although no solicitation number has been assigned and the contract type remains a forecast with no set-aside designation, the document signals an upcoming opportunity for suppliers capable of meeting high-voltage transmission system standards. The place of performance and specific delivery locations are not yet defined, suggesting the scope may span multiple sites within the agency’s service territory. Contact for small business inquiries is designated to two program managers, both affiliated with the Small Business Program, with email addresses provided for direct communication. The forecast was posted in August 2026 and is accessible through the Department of Energy's public acquisition portal, indicating transparency and planned engagement with potential vendors. Interested parties, particularly small businesses, are encouraged to monitor the official listing for updates as the procurement process advances toward formal solicitation. The emphasis on 345kV corona rings suggests critical infrastructure upgrades are planned to enhance the reliability and efficiency of high-voltage transmission lines.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
Federal
ELECTRICAL HARDWARE STOCK REPLENISHMENTThe Western Area Power Administration, under the Department of Energy, has issued a forecast for electrical hardware stock replenishment targeting small business set-asides as defined by the SBA. The procurement is classified under NAICS code 335932, which corresponds to other electrical equipment and component manufacturing, indicating the need for specialized electrical components and hardware. The contract is intended to support the replenishment of stock for operational requirements, with the primary place of performance located in Georgia. While the solicitation number is not yet available and detailed office address information is pending, the procurement is expected to be awarded to small businesses through the SBA’s small business programs. Two Small Business Program Managers are listed as points of contact for inquiries, both reachable via email at tetrault@wapa.gov and setzel@wapa.gov. This forecast announcement serves as an early indicator of upcoming acquisition activity and is posted for industry awareness ahead of formal solicitation release.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
Federal
ELECTRICAL HARDWARE STOCK REPLENISHMENT FOR CHEYENNE WAREHOUSE, MONTROSE WAREHOUSE, AND BISMARCK WAREHOUSEThe Western Area Power Administration, under the Department of Energy, has forecasted a procurement for electrical hardware stock replenishment to support three warehouses located in Cheyenne, Montrose, and Bismarck. This opportunity is designated as a small business set-aside under NAICS code 335932, indicating it is reserved for small business concerns. The solicitation has been posted as a forecast with a publication date of August 10, 2026, and while no formal solicitation number has been assigned yet, interested small businesses should prepare for an upcoming release. Although the place of performance is listed as Wisconsin, the actual work will involve supplying and managing inventory across the three specified warehouse locations. The Small Business Program Managers at tetrault@wapa.gov and setzel@wapa.gov serve as the primary points of contact for inquiries and additional information regarding this anticipated procurement.
Western Area Power Administration

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 335932
New
DIBBS
Electrical Equipment Shelf Manufacturing
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
SHELF, ELECTRICAL EQ
Solicitation # SPE4A7-26-T-637Q
The contract is a Request for Quotation for a single shelf unit designated as Electrical Equipment, identified by NSN 5975-01-612-8067, with a delivery requirement of 116 days ADO, targeting a shipment to Albany, Georgia. The item must be manufactured and delivered in full compliance with the detailed technical specifications outlined in Basic Drawing NR 01365 09021A1023, Revision NR dated October 8, 2012, and the associated TDP Rev A Gen 2 documentation. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions labeled by 'R' or 'I' numbers incorporated by reference. Packaging and labeling must adhere to MIL-STD-2073-1E and MIL-STD-129, with defined packaging codes and preservation methods including QUP 001, PRES MTHD 10, and CLNG/DRY 1, and no special marking code is required. The unit must be palletized per RP001 DLA Packaging Requirements, and any hazardous materials must be labeled in accordance with 29 CFR 1910.1200. All items containing radioactive materials above specified thresholds must also be clearly marked per the latest MIL-STD-129 revisions. The solicitation mandates strict compliance with numerous Defense Federal Acquisition Regulation Supplement clauses, particularly those related to cybersecurity, export controls, and supply chain integrity. DFARS 252.204-7012 requires safeguarding of covered defense information and cyber incident reporting, while DFARS 252.240-7997 enforces NIST SP 800-171 assessment requirements with a deviation. Export-controlled technical data is subject to ITAR or EAR regulations under DFARS 252.225-7048, restricting access to contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and been vetted by DLA. Failure to meet this certification will result in disqualification. Destination inspection is required under FAR 52.246-2, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with acceptable quality levels of 0.1, 1.0, and 4.0 for critical,
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, ELECT
Solicitation # SPE4A6-26-T-14SJ
The contract is for the procurement of one electrical insulation sheet, part number L100642.1, with NSN 5970-01-610-9757, supplied by OSHKOSH AEROTECH, LLC, under solicitation SPE4A6-26-T-14SJ. Delivery is required within five days of order receipt, FOB Origin, to the Freight Shipping Address at FRC Aviation Support Equipment, Building 105, Solomon MD 20688, with Parcel Post explicitly prohibited. The item must be delivered using the fastest traceable means available. The contract specifies detailed packaging and marking requirements: if hazardous per FED-STD-313, packaging must comply with TQ requirement IP025; if non-hazardous, commercial packaging per ASTM D3951 is required, though all DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. All packaging must be marked and labeled in accordance with MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. Sampling must adhere to MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. Acceptance requires zero non-conformances if MIL-STD-105/ASQ Z1.4 is referenced. Inspection and acceptance occur at destination, with FAR 52.246-2 applying. The contract prohibits the use of additive manufacturing for this item and requires submission of a Safety Data Sheet meeting 29 CFR 1910.1200(g) and Federal Standard No. 313 prior to award. Compliance with the Buy American Act and Berry Amendment applies, with a $150,000 threshold. Cybersecurity obligations include DFARS 252.204-7012 for safeguarding defense information and DFARS 252.240-7997 for NIST SP 800-171 DOD assessment, with applicable deviations. Payment requires electronic submission via WAWF, and fast pay is not applicable
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
GUARD, SWITCH
Solicitation # SPE7M0-26-T-036Y
The contract pertains to the procurement of one unit of a Guard, Switch with NSN 5930-01-585-4640, under solicitation SPE7M0-26-T-036Y, with a required delivery within five days of award. The item must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adheres to MIL-STD-129 and RP001 DLA Packaging Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware unless explicitly exempted for functional uses such as specified batteries, lamps, sensors, or weapons systems, in which case portable devices must include a secondary containment and be shockproof per NAVSEA 5100-003D. The product must be shipped FOB origin, packaged according to hazardous material guidelines if applicable, and marked with the unit of issue and quantity per unit pack as specified. Shipment must be dispatched using traceable freight methods, not parcel post, and delivered to the designated military logistics center at Fort Bliss, Texas. The delivery is non-negotiable with a zero percent quantity variance, and inspection and acceptance occur at destination. The contract reference includes specific supplier part numbers from multiple vendors, indicating approved sourcing, and requires compliance with all DLA logistical and labeling protocols. The solicitation was posted in August 2026 with a response deadline in the same month, and the point of contact is Laurie Wassmuth of the Department of Defense’s Maritime Supply Chain ESOCA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335932
New
Federal
SAFRAN ELECTRICAL COMPONENT FORMERLY ICORE MALE PIPE THREADS.
Solicitation # N0040626Q0334
The U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting Brand Name electrical components formerly manufactured by iCORE International Inc., specifically the Male Pipe Thread Swivel (AX0735-1224-SP) and EMP Conduit (CC261-24), to ensure compatibility with existing military systems. This requirement is a Total Small Business Set-Aside under NAICS code 335932, restricted to small business concerns, and issued under solicitation number N0040626Q0334. Only the Original Equipment Manufacturer or its authorized distributors may respond, with authorized distributors strongly encouraged to submit documentation proving their authorization. Quotes must cover the entire effort, as partial submissions will be deemed unacceptable, and are to be submitted via email to Contracting Officer Sara Robinson by July 7, 2026, at 10:00 AM local time, with the solicitation number included in the subject line. The award is expected in July 2026 and will be a firm, fixed-price contract based on a best-value determination considering technical capability, delivery date, price, and past performance, with no factor assigned relative weight. Offerors must be registered in the System for Award Management and comply with all applicable SAM, cybersecurity, and antiterrorism requirements. Items must meet ASTM-D-3951 packaging standards, prohibit specified packing materials, and comply with MIL-STD-130 and MIL-STD-129 for Unique Item Identification and shipping marking. Delivery is scheduled for July 24, 2026, to Yokosuka, Japan, under Government Origin (FOB) terms, with the Government arranging and paying for transportation through the NAVSUP WSS Shipment Processing office using the automated Ready-to-Ship form. Payment requests must be processed electronically through Wide Area WorkFlow, and acceptance occurs only upon verified receipt and confirmation that all packaging, marking, and labeling requirements are met at the destination.
Navsup Flt Logistics Ctr Puget Sound

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335932
New
SLED
146564 CONNECTOR, CONDUIT
Solicitation # 231366
The Los Angeles Department of Water and Power is soliciting bids for a 146564 Connector, Conduit under solicitation number 231366, with the opportunity posted on August 10, 2026, and a strict response deadline of August 17, 2026, at 9:00 PM Pacific Time. All submissions must be made electronically through the electronic Request Solicit Procure (eRSP) system; hard copy or mail-in bids will not be accepted. The procurement falls under NAICS code 335932 and is classified as a SLED opportunity managed by the California Water & Power agency, with performance taking place in Los Angeles, California. Armando Aparicio is the designated point of contact for inquiries and can be reached at armando.aparicio@ladwp.com. Bidders are required to review the full bid document for all submission requirements and compliance details before submitting through the official portal linked in the solicitation.
Water & Power

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Handling & Labeling Support
Environmental Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541611
New
DIBBS
Defense Telecommunications Equipment Compliance & Reporting
Administrative Management and General Management Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly Supply (NSN: 6150-01-620-2687)
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling Support
Other Scientific and Technical Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Blind Rivet Manufacturing and Supply
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-15KX
This contract is for the procurement of 26 machine screws, identified by NSN 5305009399256 and part number MS35275-251. The items must be manufactured in accordance with the current revision of the NASM35275 standard and are classified as critical application items. Delivery is required within 171 days, with a final required delivery date of March 24, 2027, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to quality and technical requirements, including MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging processes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE4A6-26-T-14ZK
This contract is for the procurement of 10 units of the Modulator PCB Assembly 25KW, identified by part number 65825812 and NSN 5998015258671. Manufactured by Northrop Grumman Systems Corporation, this critical application item is an electrostatic sensitive device used in X-Band training units. The delivery is set for 171 days after order, with a required delivery date of June 25, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to cybersecurity and safety standards, including CMMC Level 2 self-assessment and the application of covered defense information. It prohibits the intentional addition of mercury or mercury-containing compounds. Due to the sensitive nature of the electronics, the supplier must utilize DOD-qualified ESD and EMI protective packaging materials in accordance with MIL-PRF-81705 and MIL-STD-129 to prevent damage to leads and terminals during transit.
Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRU
Solicitation # SPE4A6-26-T-15EQ
This contract is for the procurement of eight thrust washer bearings, identified by NSN 3120013980360 and part number 04104007 from Flowserve US Inc. The agreement specifies a delivery timeframe of 171 days with a required ship date of February 7, 2027, and an original required delivery date of January 3, 2028. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the origin. The contract adheres to strict technical and quality standards, including DLA packaging requirements and MIL-STD-129 marking. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-15CW
This contract is for the procurement of 209 shoulder screws, identified by NSN 5305-01-179-7460 and Avibank Mfg. Inc. part number 18-53301. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after order, with an original required delivery date of December 6, 2026, and a need ship date of February 7, 2027. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Inspection and acceptance will occur at the point of origin, and the contract specifies a zero percent quantity variance for the order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-15EL
This contract is a solicitation for the procurement of 62 headless straight pins, identified by NSN 5315-01-303-2962 and part number 6532B384-4 from Indal Technologies Inc. The delivery timeline is set for 171 days after order. The acquisition is managed by the Department of Defense ASC Commodities Division and must adhere to specific DLA technical and quality requirements, including strict packaging and marking standards. The items must meet NAVAIR aircraft launch and recovery equipment traceability requirements, with bare item markings consisting of the contract number, NAWC CAGE, and part number. Quality assurance will be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, TUBULAR
Solicitation # SPE4A6-26-T-15KB
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of 2,526 tubular rivets under part number 5320-01-333-9936. The contract requires delivery within 240 days after receipt of order and is categorized under NAICS code 332510. Performance is designated for Tracy, California. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the technical data is subject to ITAR or EAR restrictions, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed export control training. All technical data disclosure must be authorized by the Department of State or Department of Commerce in accordance with DFARS 252.225-7048.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details