Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSULATION SLEEVING, EL

Active
SPE4A6-26-T-17KFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 806 feet of electrical insulation sleeving, identified by NSN 5970-01-105-6535. The contract is a total small business set-aside under NAICS code 331210, with a delivery requirement of 159 days after receipt of order. Performance is located in Tracy, California. The contract carries stringent security and compliance mandates, including CMMC Level 2 certification for third-party assessment and strict adherence to Covered Defense Information protocols. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completion of specific DLA export-control training to access the data. Physical identification and bare item marking are also required for this procurement.

General Info

DoD procurement of 806ft electrical insulation sleeving; small business set-aside; Tracy, CA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

(1)

SPE4A6-26-T-17KF.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Amanda Stewart
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATION SLEEVING,ELECTRICAL
INSULATION SLEEVING
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5970-01-105-6535 Quantity: 806 FT Purchase Request: 7017741149QTY: 806 Delivery: 159 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-341J
This contract is for the procurement of 299 feet of metallic tubing, specifically 1/2 inch outer diameter seamless copper tube with a 0.035 wall thickness, designed for air conditioning and refrigeration field service per ASTM B280. The items must be delivered in lengths between 10 and 12 feet with sealed ends. The procurement is designated as a critical application item and requires strict adherence to quality standards, including zero-based sampling plans and the prohibition of mercury and class I ozone-depleting chemicals. Delivery is set for the DLA Distribution center in New Cumberland, Pennsylvania, with a required delivery date of February 25, 2027. The contract specifies that inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-C-3993. Additionally, the supplier must provide metal certification data as outlined in the Contract Data Requirements Lists and the DLA Master List of Technical and Quality Requirements.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M4-26-T-342B
This contract is for the procurement of 14 metal tube assemblies under solicitation SPE7M4-26-T-342B for the Department of Defense Fluid Handling Division. The items are classified as critical application items and must be manufactured according to specific technical data packages and reference drawings, including those from Globe Engineering Co. and Tomco Machining. Delivery is set for 303 days after order, with a need ship date of September 30, 2026, and shipment destined for the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict quality and security compliance, including CMMC Level 2 certification and adherence to DLA packaging requirements and MIL-STD-129 labeling. Inspection and acceptance will occur at the origin. The contract includes a First Article Test requirement to verify product quality before full delivery. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-340E
This contract is for the procurement of 10 lengths of seamless plain round copper tubing, each 20 feet long with a 2-1/8 inch outer diameter and 0.070 inch wall thickness. The tubing must be produced to H58 drawn temper in accordance with ASTM B280 standards for air conditioning and refrigeration field service. These components are designated as critical application items used on Detroit Diesel engine powered landing craft, specifically Navy design LCM 8 Mod 1 and support equipment F-4 and F-16. The supplier must ensure all product marking includes the contract number and CAGE code, adhering to MIL-STD-129 and DLA packaging requirements. Delivery is set for the DLA Distribution New Cumberland facility with a required delivery date of March 18, 2027. The contract prohibits the use of Class I ozone depleting chemicals and requires compliance with Metal Certification Contract Data Requirements Lists and FAR 52.246-15 certificate of conformance procedures.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A7-26-T-664P
This contract is for the procurement of 168 feet of electrical insulation sleeving, identified by NSN 5970-01-274-7724 and part number M23053/15-106-0. The item is classified as a critical application item and must comply with SAE AS23053/15 and AS23053C standards. The delivery is required within 171 days after the order date, with a quantity variance allowance of plus or minus 10 percent. The supplies are subject to a 24-month extendable shelf life and must adhere to strict quality and sampling plans, including MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with inspection and acceptance occurring at the destination. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by specific systems.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M0-26-T-043H
This contract is for the procurement of one seamless metallic tube, identified by NSN 4710014573299. The tube features a plain round cross-section with a nominal diameter of 6.000 inches and a nominal wall thickness of 1.500 inches. It must be hot rolled and preheat treated to RC 35/39, with a minimum length of 110.000 inches and a maximum length of 113.000 inches. The order is issued by the Department of Defense for delivery to the US Army AWCF SSF at Fort Campbell, Kentucky. Delivery is required within five days after the order is placed, with a required delivery date of August 10, 2026. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE AND FITTINGS, META
Solicitation # SPE4A5-26-T-364A
This contract is for the procurement of 31 units of metallic tubes and fittings, specifically Honeywell International Inc. part number 3883489-1 under NSN 4710-01-371-9562. The items are designated as critical application items and must adhere to specific technical and quality requirements, including the removal of government identification from non-accepted supplies and the use of approved measuring and test equipment. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331 standards. Delivery is set for 171 days after the order, with a required delivery date of March 7, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging and marking must comply with MIL-STD-129, MIL-H-775, and DLA packaging requirements for procurement. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Supply of Cold-Drawn Steel Round Bar
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Corrosion-Resistant Steel Bar SupplyThis subcontract, issued by the Department of Defense through Construction & Equipment MRO SVC I, requires the supply of corrosion-resistant steel bars. The materials must be hot-rolled, annealed, round pickled steel bars with a diameter of 0.875 inches and lengths ranging from 8 to 16 feet. All supplied materials must strictly comply with SAE AMS5639K and SAE AMS-QQ-S-763D standards, and each shipment must be accompanied by a quality certification. The solicitation was posted on August 13, 2026, with a response deadline of August 24, 2026. This procurement falls under NAICS code 331210, which pertains to iron and steel forging and stamping. Interested parties can find further details via the provided DIBBS link for solicitation SPE8E926T3477.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Seamless Steel Tubing Manufacturing and SupplyThis subcontract, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys, requires the manufacture and supply of approximately 50 feet of seamless, normalized SAE 4130 alloy steel tubing. The materials must strictly adhere to the SAE AMS6360R specification and include continuous identification marking as mandated by SAE-AMS-STD-185. The opportunity falls under NAICS code 331210 and was posted on August 13, 2026. Interested parties must submit their responses by the deadline of August 24, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Cold-Finished Steel Hexagon Bar SupplyThe Defense Logistics Agency, under the Department of Defense, is seeking a subcontractor for the supply of cold-finished, annealed steel hexagon bars. The materials must strictly adhere to military specifications regarding dimensions, packaging, and certification requirements. This procurement falls under NAICS code 331210. The solicitation was posted on August 13, 2026, with a response deadline of August 24, 2026. Interested parties can find further details and submit their responses through the DIBBS portal.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Precision Metal Steel Bar Supply (4140 Cold Finish, Annealed)The Defense Logistics Agency under the Department of Defense is seeking a subcontract for the supply of 4140 alloy steel bars. The required materials must be round, annealed, and cold-finished with a diameter of 3.500 inches and lengths ranging from 12 to 20 feet. All supplied steel must include full traceability and certification to meet quality standards. This procurement opportunity, identified under NAICS code 331210, was posted on August 13, 2026, with a response deadline of August 24, 2026. The designated place of performance for this contract is located in Westhampton Beach, New York.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-337M
This contract is for the procurement of 177 feet of metallic aluminum tubing, identified as a critical application commercial item. The tubing must have an outer diameter of 0.375 inches, a wall thickness of 0.028 inches, and be provided in random lengths between 10 and 12 feet with a T6 temper. It must adhere to SAE AMS 4083K specifications and be capable of a maximum operating pressure of 3,000 psi. The agreement specifies a delivery timeframe of 170 days with a required delivery date of April 13, 2027, shipping FOB Origin to DLA Distribution Depot Hill. Quality assurance requires inspection and acceptance at the origin, following MIL-STD-1916 or ASQ H1331 sampling plans. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM B660, and the contract strictly prohibits the use of Class I ozone-depleting chemicals.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
CONTROL, ALARM
Solicitation # SPE4A6-26-T-17PV
This contract is for the procurement of alarm control units, identified as commercial off the shelf critical application items from Eldec Aerospace Corp under part number 1-899-15 and NSN 6340001150701. The total quantity requested is 58 units, split between two line items of 16 and 42 units. Delivery is required within 171 days after order, with a need ship date of February 12, 2027, and an original required delivery date of October 26, 2028. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Shipments are directed to DLA Distribution Depot Hill in Utah and DLA Distribution Warner Robins in Georgia. Compliance requirements include CMMC Level 2 self assessment, adherence to MIL-STD-129 for marking, and specific DLA packaging and palletization standards. This is a total small business set-aside under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-17SX
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-17SX, is for the procurement of 416 turnlock fastener studs. The item is identified as a commercial product with part number 98264-4-410 and national stock number 5325-00-687-5193, manufactured by Monadnock Co. The place of performance is designated as Tinker AFB. The contract requires adherence to DLA packaging requirements and specific technical and quality standards as outlined in the DLA Master List. Delivery is required within 171 days after the order is received. Interested parties must respond by the deadline of August 24, 2026, and can contact Tyler Greene for further information.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-18ND
This contract is a solicitation for the procurement of 228 special purpose electrical cable assemblies, identified by NSN 5995-01-599-3052. The requirement is designated as a critical application item and is set aside for Service-Disabled Veteran-Owned Small Businesses. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of July 25, 2027. The items are to be delivered FOB Origin to the DLA Distribution Red River facility in Texarkana, Texas. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the provider must comply with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and various DLA master list technical requirements. Configuration change management and source approval request documentation are also required.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-17QU
This contract is a solicitation for the procurement of 268 machine bolts under NSN 5306-00-182-1855. The items are designated as critical application hardware and must adhere to specific technical standards, including NASM3 through NASM20 and NASM6812. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling conducted according to MIL-STD-1916 or ASQ H1331. Physical identification and marking must comply with MIL-STD-130N, and the material has no shelf life requirement. The delivery is set for 171 days after order, with a required delivery date of May 28, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging requirements. This is a total small business set-aside under NAICS code 332721, managed by the Department of Defense ASC Commodities Division.
Precision Turned Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-18ME
This contract is for the procurement of 206 shear bolts, identified by NSN 5306015838163 and part number MS14181-03024. The items are classified as critical application items and must adhere to the technical specifications of NASM14181 Revision 9. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of June 23, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-2073-1E, and marking requirements per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Inspection and acceptance will take place at the destination. The contract allows for no quantity variance, meaning exactly 206 units must be supplied.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-17LH
This contract is for the procurement of plain hexagon nuts, specifically part number MS51968-23 with thread class 2B, conforming to specifications FF-N-836 and MS51968. The order consists of 118 packages, with each package containing 5 units. The items are classified as commercial products and are designated as critical application items. Manufacturing must adhere to the current revision of the applicable part standards, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. The agreement specifies a delivery timeframe of 171 days, with a required delivery date of March 28, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Additional quality and technical mandates are incorporated via the DLA Master List, including specific requirements for bare item marking and the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-17BB
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-17BB, is for the procurement of 102 flat washers identified by NSN 5310-00-801-6723. The contract requires delivery within 221 days after order and is categorized under NAICS code 332722. Performance is located in New Cumberland, Pennsylvania, and the primary point of contact is Sibel Claywell. The contract is subject to strict technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the technical data is subject to export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 213113
New
DIBBS
BEARING, BALL, ROD EN
Solicitation # SPE4A6-26-T-18KS
This contract is for the procurement of three ball rod end bearings, identified by NSN 3110-01-529-2501 and part number MSSKE6DSC. The items are designated as critical application components and must adhere to specific technical and quality requirements, including configuration control and precise thread gaging per SAE AS8879 or MIL-S-7742. Delivery is required within 171 days, with inspection and acceptance occurring at the origin. A significant requirement of this solicitation is the domestic sourcing restriction, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada. Additionally, at least 50 percent of the total cost of the bearing components must be from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-197M.
Support Activities for Coal Mining

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
This solicitation is for the procurement of 267 self-locking hexagon nuts under contract number SPE4A6-26-T-17LV for the Department of Defense ASC Commodities Division. The items must be manufactured according to current military or consensus non-government part standards, with a delivery requirement of 171 days after receipt of order. Performance is based in Jacksonville, Florida, and the procurement is conducted as fully competitive. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging, bare item marking, and the removal of government identification from non-accepted supplies. Quality assurance involves inspection and acceptance at origin using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds unless specifically exempted for functional purposes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-17ZP
This contract is for the procurement of 34 sleeve bushings, identified by NSN 3120-01-168-4477 and part number AM2667-2-5. The items are designated as critical application items and must be manufactured according to TDP Rev A Gen 1 and QAP 13873. Because the manufacturing process may require specific casting or forging tooling that the government does not possess, suppliers are advised to coordinate with DLA Aviation or Land and Maritime Supply Chains for tooling and material assistance. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Quality assurance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Delivery is set for 171 days after the order, with a required delivery date of June 14, 2027, shipping to the DLA Distribution Depot Oklahoma at Tinker AFB.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-17YR
This contract is for the procurement of 4,428 shear bolts, identified by NSN 5306-01-130-8993 and part number NAS6604-5. The items are classified as critical application hardware and must be manufactured according to the current revisions of NAS6603 through NAS6620 and NAS4002. Delivery is required within 171 days, with a need date of February 12, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling in accordance with MIL-STD-1916 or ASQ H1331. Strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-130N identification is mandatory. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LOUVER, LIGHT
Solicitation # SPE4A6-26-T-18GY
This contract is for the procurement of 1,100 light louvers under solicitation SPE4A6-26-T-18GY, identified by NSN 6210-01-479-4595. The requirement is a total small business set-aside for the Department of Defense, ASC Commodities Division. Delivery is required within 171 days, with an original required delivery date of November 29, 2026, and a need ship date of February 12, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. The item is designated as a critical application item, with associated part numbers from Therma-Tech Engineering Inc and Oshkosh Defense LLC. Inspection and acceptance will occur at the destination.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details