This Solicitation opportunity from Department Of Defense was posted on May 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

INSULATION SLEEVING

Closed

SPE4A7-26-T-360XFederal

Submission Closed05/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335999

New

DIBBS

LAMP DIMMER MODULEThe contract pertains to the procurement of 16 units of the Lamp Dimmer Module, identified by the NSN/Part Number 6350-01-174-6702. The solicitation, designated SPE4A6-26-T-94B3, was issued by the Defense Logistics Agency under the Department of Defense. The contract was posted on June 16, 2026, with responses due by June 24, 2026. This is a federal solicitation without any specified set-aside or NAICS code, and the place of performance details are not provided. The contract documentation indicates that the Defense Logistics Agency is managing this procurement, focused on securing lamp dimmer modules likely intended for defense-related applications. While specific addresses or points of contact are not listed, a link to the solicitation is available for further reference. Overall, the contract sets out the acquisition terms for these modules within a defined timeline, supporting federal defense logistics needs.

Defense Logistics Agency

POSTED

DEADLINE

HOLDER, ELECTRICAL CONTThe contract solicits bids for the procurement of seven units of an electrical connector holder identified by part number 5977-01-267-3404. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, carries the reference number SPE4A6-26-T-94D6 and was posted on June 16, 2026. Interested parties are required to submit their responses by the deadline on June 24, 2026. This procurement opportunity is classified as a federal solicitation without any specified set-aside designations or applicable NAICS codes. The place of performance and detailed office address information have not been disclosed. The contract is part of the agency’s ongoing efforts to manage its supply chain for electrical components, ensuring timely acquisition through the Defense Logistics Agency platform.

Defense Logistics Agency

POSTED

DEADLINE

FILTER, MECHAN.-ELECThe contract pertains to the procurement of mechanical-electrical filters identified by the National Stock Number 4933-01-456-5216. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, calls for a quantity of five units. The solicitation was posted on June 16, 2026, with a response deadline set for June 24, 2026. This solicitation is a federal procurement effort aimed at fulfilling a specific equipment need within the agency. No specific type of set-aside or NAICS code is associated with this contract, and details about the place of performance or contact points were not provided. The procurement process is managed through the Defense Logistics Agency, and the solicitation can be accessed online through the designated DIBBS portal. The contract represents a targeted acquisition to supply essential mechanical-electrical filters to support federal defense operations.

Defense Logistics Agency

POSTED

DEADLINE

CONTACT, ELECTRICALThe contract pertains to the procurement of 73 units of an electrical contact identified by the NSN/Part Number 5999-01-235-0401. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense, with the solicitation number SPE4A6-26-T-94N4. The solicitation was posted on June 16, 2026, and the deadline for responses is set for June 24, 2026. This is a federal government contract opportunity without any specified set-aside or NAICS code. The place of performance and office address details are unspecified. The solicitation aims to acquire the specified quantity of electrical contacts to support defense-related logistics needs. Further information and submission details are accessible through the Defense Logistics Agency’s bidding platform.

Defense Logistics Agency

POSTED

DEADLINE

59--ADAPTER,COAX,AIRCRAThe contract pertains to the procurement of 11 units of a coaxial adapter for aircraft, identified by NSN 5999015815421. The delivery is required to the DLA Distribution center in San Diego within 252 days after order (ADO). The solicitation is issued as a Request for Quote (RFQ) by DLA Aviation under solicitation number SPE4A626T94S3, with a response deadline of June 24, 2026. Quotes must be submitted electronically, and all responsible sources are eligible to participate. The approved source for this item is designated as 03538 7288464P1. No hard copies of the solicitation or related specifications and drawings are available; all information must be accessed online through the provided link. This procurement falls under the NAICS code 335999 and is managed by the Department of Defense from its Richmond, VA office. The contract type is combined, with no specific set-aside indicated. Interested vendors or parties with questions are directed to contact the assigned buyer via email, as detailed in the solicitation document accessible through the DLA’s procurement portal. The process emphasizes electronic submission and encourages broad competition among qualified vendors.

DLA Aviation

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract covers the procurement of electrical insulation sleeving measured in feet, with a total ordered quantity of 2,973 feet and a delivery timeframe of 162 days FOB origin. The sleeving must comply with technical and quality requirements specified in the DLA Master List, incorporating standards such as SAE AS23053C and MIL-STD-129R for marking and identification. This critical application item has a shelf life of 24 months (extendable) under Type II, Code 6 classification, and packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and marking protocols ensuring compliance with DLA packaging standards. Inspection and acceptance are designated to occur at the destination, with sampling procedures following MIL-STD-1916 or comparable sampling plans to verify critical, major, and minor attributes. Physical identification and marking requirements apply to both accepted and non-accepted supplies, with the removal of government identification from rejected items mandated. The contract references specific part numbers, NSNs, and detailed packaging and palletization instructions, emphasizing strict quality control, shelf-life management, and regulatory adherence to ensure product integrity throughout the supply chain.

General Info

Procurement of 2,973 feet electrical insulation sleeving, 162-day delivery, strict quality and packaging standards.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-360X Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 22

Solicitation

Response DeadlineMay 28

Deadline has passed

Submission Closed

05/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressUS

Contacts

ISAIAH STILL

contact@example.gov

Full Description

INSULATION SLEEVING
INSULATION SLEEVING, ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RT001: MEASURING AND TEST EQUIPMENT
UNIT OF ISSUE = FEET/FT
OVERALL LENGTH = ANY ACCEPTABLE
SHELF LIFE:
TYPE II, CODE 6, 24 MONTHS (2 YRS), EXTENDABLE
RS058: Shelf life requirement RS001 for a TYPE 2 (CODE 6) item with a shelf life of 24 month (extendable) applies to this item.
SPE4A7-26-T-360X
SECTION B
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD SAE AS23053C
REVISION NR C DTD 11/01/2023
PART PIECE NUMBER: SAE AMS-DTL-23053/18
IAW REFERENCE STD NR MIL-STD-129R(3)
REVISION NR R DTD 02/25/2023
PART PIECE NUMBER: TYPE II, 24 MONTHS SHELF LIFE
IAW REFERENCE NON GOVT STD QPL-AS23053
REVISION NR DTD 02/11/2026
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016647189 0001 FT 2,973.000
NSN/MATERIAL:5970013518985
DELIVERY (IN DAYS):0162
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:200 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL NSN/Part Number: 5970-01-351-8985 Quantity: 2,973 FT Purchase Request: 7016647189QTY: 2973 Delivery: 162 days ADO