INSULATION SLEEVING
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
This contract specifies the procurement of insulation sleeving under solicitation SPE4A6-26-T-10HL, with a quantity of 28 units delivered FOB origin within five days of order. The item is identified by NSN 5970-01-737-7278 and part number F42-60FR from TE Connectivity Corporation, with no shelf life requirement and no need for unique item identification. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards; sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. Packaging must comply with MIL-STD-129, and if non-hazardous per Fed-Std-313, must adhere to ASTM D3951 unless overridden by DLA requirements. Palletization follows DLA packaging standards, and hazardous materials must meet IP025 requirements. Delivery is to Tobyhanna Army Depot, ASRS Building 1 Bay 6, with shipments required via the fastest traceable means—parcel post is prohibited. The freight and marking address is ASARS 1C Bay 6 at the same location, with a required delivery date of June 9, 2026. All markings, labels, and documentation must conform to government specifications, and the contract is issued under the DoD authorized unit of issue with a unit price of $28.00, totaling $784.00.
General Info
Agency
NAICS
Place of Performance
ASARS 1C BAY 6, TOBYHANNA, PA, 18466-5050, USSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
INSULATION SLEEVING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TE CONNECTIVITY CORPORATION 06090 P/N F42-60FR
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017624792 0001 EA 28.000
SPE4A6-26-T-10HL
SECTION B
PR: 7017624792 PRLI: 0001 CONT’D
NSN/MATERIAL:5970017377278
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W90CGG
W0ML USA DEP TOBYHANNA
SQUIRE STREET
ASRS RECEIVING BLDG 1 BAY 6
TOBYHANNA PA 18466-0000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W25G1V
W0ML USA DEP TOBYHANNA
SQUIRE STREET
ASARS 1C BAY 6
TOBYHANNA PA 18466-5050
US
MARKFOR
W25G1V
W0ML USA DEP TOBYHANNA
SQUIRE STREET
ASARS 1C BAY 6
TOBYHANNA PA 18466-5050
US
M/F: (TCN) W25G1V615500KP
RDD: 165
PROJ: TP 1
SUPP ADD: W25G1V SIG: A
SPE4A6-26-T-10HL
SECTION B
PR: 7017624792 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VK
Need Ship Date:00/00/0000 Original Required Delivery Date:06/09/2026
SPE4A6-26-T-10HL NSN/Part Number: 5970-01-737-7278 Quantity: 28 EA Purchase Request: 7017624792QTY: 28 Delivery: 5 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency