Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Insulation Tape

Awarded
SPE4A626DC089Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is a sole-source indefinite quantity contract for Insulation Tape identified by NSN 5907-01-306-8256, awarded under 10 U.S.C. § 3204(a)(1) with a three-year base period and options for increased quantities and term extensions, though specific dollar values and option percentages are redacted. The acquisition is restricted to two approved sources—Aircraft & Commercial (CAGE 8Z281) and Leonardo SPA Helicopters Div (CAGE A0126)—due to a lack of technical data rights, military-sensitive technology designation (AMSC S), and the absence of viable alternative suppliers, as confirmed by a sources-sought notice that received no responses. The contract is administered by the Defense Logistics Agency Aviation in Richmond, Virginia, with Cassandra Cooper serving as the contracting officer, and is governed by a framework of Applicable Material Source Codes (AMSC) that enforce source control, engineering approval, and high-reliability criteria rather than traditional technical specifications. Packaging, inspection criteria, delivery locations, and invoicing procedures are not explicitly defined, with administrative details such as payment office, accounting codes, and contracting officer’s representative information omitted. The contract supports defense systems requiring controlled access to sensitive technology and mandates compliance with CUI handling protocols, though no formal representations, certifications, or offeror submissions are documented, and the award is based solely on government justification without competitive evaluation or pricing transparency.

General Info

Insulation tape contract issued by DLA Aviation, Richmond, VA, non-competitive, contact Cassandra Cooper.

NAICS

325520 - Adhesive Manufacturing

Place of Performance

VA

Set-Aside

NONE

Documents

1

SPE4A626RX740 - Justification for Other Than Full and Open Competition

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Justification (J&A)

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts1 person available
OfficeRICHMOND, VA, 23237, USA
Office AddressRICHMOND, VA, 23237, USA
Contacts
Cassandra Cooper

Full Description

Show more

Redacted J & A

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0196
Solicitation SPE8ES-27-T-0196 is a request for quotations for the procurement of adhesive, identified by NSN 8040-01-129-2558. The requirement consists of 12 pints, with each unit packaged in a one-pint can. The items are to be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 20, 2027, and an original required delivery date of April 3, 2027. The contract specifies a non-extendable shelf life of 12 months for Type I (Code H) items. Due to the hazardous nature of the material, the contractor must comply with strict safety and labeling standards. This includes the submission of Safety Data Sheets (SDS) and labels consistent with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for lot or batch numbers and special marking code 32. Palletization must follow DLA packaging requirements RP001. The procurement is governed by various FAR and DFARS clauses, including those related to cybersecurity safeguarding of covered defense information, the Buy American Act, and the prohibition of hexavalent chromium. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system. Evaluation may include a price preference for HUBZone concerns, and the successful offeror must be registered in the System for Award Management (SAM).
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0207
Solicitation SPE8ES-27-T-0207 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one unit of yellow adhesive, identified by NSN 8040-01-663-3917. The requirement specifies a 5.0-ounce size and includes a shelf life requirement of 12 months, which is extendable. Delivery is required within 20 days of award, with a required delivery date of October 29, 2026. The shipment is designated as FOB Destination to Nellis Air Force Base, Nevada, and must be transported via the fastest traceable means, excluding parcel post. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Special Marking Code 33 for shelf life. Because the item is classified as hazardous material, the supplier must comply with IP025 and the Hazard Communication Standard 29 CFR 1910.1200, which requires the submission of Safety Data Sheets and specific hazard labels for approval prior to award. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. Additionally, the contract incorporates cybersecurity reporting standards under DFARS 252.204-7012 and requires offerors to validate their socioeconomic status and telecommunications certifications via the System for Award Management.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325520
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A0-27-T-0378
Solicitation SPE4A0-27-T-0378 is a request for quotations issued by the Defense Logistics Agency, Department of Defense, for the procurement of electrical insulation tape, identified by NSN 5970-01-012-4280. The requirement consists of multiple line items, with each unit of issue containing 36 yards of tape. Delivery is required within five days of award, with specific delivery dates set for September 2 and October 1, 2026. Shipments are directed to locations in Peoria, Illinois, and Tyndall Air Force Base, Florida, with FOB, inspection, and acceptance all occurring at the point of origin. The procurement is subject to strict quality and manufacturing standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, and items must adhere to BASIC CID A-A-59474D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, with a specific prohibition on the use of mercury or mercury compounds. Notably, the government will not evaluate or award contracts to offerors providing items produced via additive manufacturing. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must be registered in the System for Award Management and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Price evaluation preferences are available for certified HUBZone small business concerns, and quotes should be submitted via DIBBS.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NAICS: 333310
New
Federal
CASE,OPTICAL INSTRUMENT
Solicitation # SPE4A727R0097
The Defense Logistics Agency is conducting market research through a sources sought notice, identified by solicitation number SPE4A727R0097, to identify capable providers for the manufacture and supply of optical instrument cases. The specific requirement is for part number OFM-2054-A1, NSN 5855-01-609-6252, with an estimated quantity ranging from a minimum of 76 to a maximum of 305 units. While L3 Technologies, Inc. is currently the only approved source of supply, the government is seeking information to determine the procurement method, which may result in a small business set-aside or full and open competition with the possibility of multiple awards. The applicable NAICS code for this procurement is 333310. Prospective contractors must demonstrate the capacity to provide all labor, materials, facilities, and equipment necessary for the new manufacture of the items, including component procurement, inspection, testing, packaging, and shipping. Responsibilities may also extend to supply chain management, logistics planning, and addressing diminishing manufacturing sources. Interested parties must submit their organization's details and a tailored capability statement to Montana Kipp via email by October 28, 2026. This process is purely voluntary and does not constitute a formal request for proposals; unit pricing will be established only at the time of a future contract award.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 16 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS