Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

INSULATION, VEHICULA

Awarded
SPE7LX24F15TUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded Contract SPE7LX24F15TU to POLYMER TECHNOLOGIES INC, with a CAGE code of 0PZF7, for the supply of 1,062 units of vehicular insulation (NSN 2540-01-548-0016) at a total price of $55,924.92. This delivery order is issued under the base contract SPE7LX20D5018 and was effectuated through Modification P00003, which reinstated previously canceled CLIN 0003 due to administrative errors. The contract is classified as a firm fixed price action under simplified acquisition procedures, with a delivery requirement of no later than November 26, 2025, to a Defense Distribution Depot. The award date is July 31, 2026, and all administrative actions were processed through DLA Land and Maritime’s Land Supply Chain, based in Columbus, Ohio. The contracting officer, Alexander Livingston, serves as the primary point of contact, with no designated contracting officer’s representative or technical representative identified in the documentation. The contract includes no specified packaging, marking, inspection criteria, or quality standards beyond reference to the NSN and applicable FAR clauses governing modifications, specifically FAR 13.004(c) and FAR 43.103(b). No special requirements such as security clearances, key personnel provisions, options, or organizational conflict of interest clauses are included. There are no representations or certifications provided regarding socioeconomic status, small business status, or compliance with labor or environmental standards, and no attachments, evaluation factors, or payment details such as invoicing method or remittance address are documented. The delivery location is implied to be a DLA depot but not specified with further detail, and FOB terms are not stated. The contractor’s address is listed as Newark, Delaware, though it is not confirmed as the place of performance. All financial, logistical, and administrative details are contained within a single CLIN, with no option quantities or future extensions indicated.

General Info

POLYMER TECHNOLOGIES INC awarded $55,924.92 for vehicular insulation under DLA contract SPE7LX20D5018.

Contract Value

$0

NAICS

326150 - Urethane and Other Foam Product (except Polystyrene) Manufacturing

Place of Performance

DE, USA

Set-Aside

NONE

Award Issued Date

Documents

2

SPE7LX24F15TU Modification P00003

PDF, High priority: read this firstmodification
High

SPE7LX24F15TU.pdf

PDF, Low priorityother
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUSA
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
DLA award SPE7LX24F15TU posted on DIBBS. Awardee: POLYMER TECHNOLOGIES INC (CAGE 0PZF7) Total Contract Price: $55,924.92 Award Date: 07-31-2026 Delivery order under: SPE7LX20D5018 Line items: - INSULATION, VEHICULA (NSN/Part 2540015480016, PR 7009054006)

Similar Contracts

Same NAICS industry code

NAICS: 326150
New
SLED
Open Cell Foam Joint System
Solicitation # MODOT SL 0000000089SL
The Missouri Department of Transportation St. Louis District is soliciting bids for a Blanket Purchase Agreement to provide an Open Cell Foam Joint System. The contract period runs from the date of award through October 31, 2027, with the option for two additional one-year extensions. The required system must be supplied by a single manufacturer and include cellular polyurethane foam impregnated with hydrophobic polymer and fuel-resistant silicone, field-applied epoxy adhesive primer, and silicone sealant bands. Technical specifications require a working range of 50 percent in both tension and compression, a temperature service range of -40 to 185 degrees Fahrenheit, and UV resistance for 2000 hours. Awards will be granted to the lowest and best bid that complies with all mandatory specifications, Missouri statutes, and Executive Orders. Evaluation factors include price, vendor responsibility, and specific preferences, including a 10 percent preference for products meeting the Domestic Products Procurement Act. Bidders must submit their responses via the MissouriBUYS Bid Board by November 6, 2026, and include a signed Exhibit A and detailed product descriptions. Shipping must be provided as FOB destination freight prepaid, with all packing and handling charges included in the bid price. The contract includes standard clauses regarding nondiscrimination, warranties, and indemnification, and requires compliance with the Anti-Discrimination Against Israel Act for contracts exceeding 100,000 dollars.
MODOT ST LOUIS DISTRICT

POSTED

5 days ago

DEADLINE

in 9 days
View Details
NAICS: 326150
SEAT-VL URETHANE — 4820000543850 — N0010426QNE45
Solicitation # N0010426QNE45
Solicitation NO0014-26-Q-NE45, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the procurement of Seat-VL Urethane (NSN 4820-00-054-3850). This item is designated as Special Emphasis material Level I Scope of Certification because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The seats must be manufactured from MD71-GG Mearthane (Graphite Filled Urethane) by Mearthane Products Inc. and must adhere to strict chemical and mechanical properties, including specific hardness, tensile strength, and water absorption limits. The material must be mercury-free and satisfy toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The contract mandates rigorous quality assurance and traceability standards. The contractor must maintain a quality system compliant with ISO 9001 and calibration standards such as ISO 10012 or ANSI-Z540.3. Full traceability from raw material to the finished component is required, with permanent marking per MIL-STD-792 on the outer cylindrical surface. Key deliverables include a Certificate of Compliance and material certification test reports submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The resulting award will be bilateral and includes a one-year warranty from the date of delivery.
Navsup Weapon Systems Support Mech

POSTED

27 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS