Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INSULATION, VEHICULA

Active
SPE7L4-26-T-5851Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of insulation for vehicle applications under solicitation SPE7L4-26-T-5851, with the NSN 2510016830385 and part number MV39136 supplied by ROBERTSON MANUFACTURING INC. Five units are required at a unit price of $5.00, totaling $25.00, with delivery scheduled 87 days after award and must be shipped FOB origin. The items are subject to strict packaging standards per MIL-STD-2073-1E including specific preservation methods, wrapping materials, and unit container codes, and must be marked in accordance with MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements, and delivery is directed to DLA Distribution Albany at the specified transportation address. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract stipulates compliance with all DLA procedural notes for transportation and freight shipping. The original delivery date is December 11, 2025, with a needed ship date of October 7, 2025, and the contract type is a federal solicitation under NAICS code 332999.

General Info

Five insulation units at $5 each, FOB origin, delivery by October 7, 2025, to DLA Albany per MIL-STD specs.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

814 RADFORD BLVD BLDG 1221 DOOR 20, ALBANY, GA, 31704-1128, US

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-5851.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
Ryan Hammond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATION,VEHICULA
INSULATION,VEHICULA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
ROBERTSON MANUFACTURING INC 77570 P/N MV39136
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7011801562 0001 EA 5.000
NSN/MATERIAL:2510016830385
DELIVERY (IN DAYS):0087
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:FA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
SPE7L4-26-T-5851
SECTION B
PR: 7011801562 PRLI: 0001 CONT’D
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY
TRANSPORTATION OFFICER
814 RADFORD BLVD BLDG 1221 DOOR 20
ALBANY GA 31704-1128
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY DDAG-T
MCLB BLDG 1221 DOOR 20
814 RADFORD BLVD
ALBANY GA 31704-1128
US
Need Ship Date:10/07/2025 Original Required Delivery Date:12/11/2025
SPE7L4-26-T-5851 NSN/Part Number: 2510-01-683-0385 Quantity: 5 EA Purchase Request: 7011801562QTY: 5 Delivery: 87 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
Manufacture of Packing Retainer (Non-Commercial Item)The contract entails the custom fabrication of 179 units of a military-spec packing retainer identified by NSN 5330004122772, manufactured to exacting standards including MIL-STD-130N for marking, SAE AS8791D for material and process control, and NAVSEA 5100-003D for naval system compatibility. All units must be free of hazardous materials such as asbestos and mercury, ensuring environmental and personnel safety throughout the product lifecycle. The item is classified as a non-commercial item, indicating it is uniquely designed or developed for military use and not available off-the-shelf. The contract is issued as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a NAICS code of 332999 for other fabricated metal product manufacturing. It was posted on July 28, 2026, and performance location details are not specified, implying potential flexibility in manufacturing site selection. No set-aside classification is indicated, and there is no designated point of contact listed in the provided data. The contractual obligation centers entirely on the precise construction and compliance of the retainers without ancillary services or support requirements.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 332999
New
DIBBS
Flat Washer Supply (NSN: 5310-01-733-7584)The contract calls for the supply of five flat washers per CLIN 0001, with each item requiring full compliance with the DLA Master List specifications for NSN 5310-01-733-7584. All deliverables must adhere to military packaging, labeling, and documentation standards, ensuring readiness for immediate integration into defense logistics systems. The work is solicited under a subcontract type with a North American Industry Classification System code of 332999, indicating it falls under other miscellaneous manufacturing. The contracting activity originates from the ASC Commodities Division within the Department of Defense, and performance is expected to support federal military operations without geographic restriction specified. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026, providing a six-day window for submissions. While no set-aside designation or specific point of contact is provided, the requirement is accessible through the DIBBS platform, indicating it is part of the Defense Logistics Agency’s procurement ecosystem. All vendors must ensure precise alignment with the technical and administrative standards outlined by military authorities, as deviations in packaging or documentation could result in non-compliance and rejection of delivery.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMEThis contract is for the procurement of one hose assembly, nonmetallic, identified by NSN 4720-01-571-2920 and part number AT361660 from Deere & Company, under solicitation SPE7M0-26-T-021X. The item must be delivered within five days of order placement at origin FOB terms, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging requirements. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Delivery is to be made via the fastest traceable shipping method, explicitly excluding parcel post, with shipping instructions directed to the Distribution Management Office at MCLB Albany, Georgia, and the point of contact for inquiries is Abaigael Masterson. The original required delivery date is July 29, 2026, and the contract includes government-specific identifiers for tracking and logistics coordination, with the unit of issue being each and the total price set at one dollar.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
SUPPORT, STRUCTURALThis contract under solicitation number SPE7L3-26-T-9467 seeks one unit of a structural support item identified by NSN 2510-01-690-3838, with a delivery requirement of 20 days after award. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones unless amended. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Components subject to Qualified Products Lists or Qualified Manufacturers Lists must meet the qualification criteria outlined in procurement note H02. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location; access is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DLA-mandated training and received formal approval. The place of performance is Fort Riley, Kansas, with Lee Miller of the Department of Defense’s Land Supplier Operations Vehicle Support serving as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMEThis contract specifies a nonmetallic hose assembly with a 1-3/8 inch inner diameter and a length of 35-1/2 inches, governed by the military specification MS28741K and referenced drawing 98752, Revision E. The fittings must be aluminum and conform to MS24587, and the assembly is classified as a critical application item with a 120-month non-extendable shelf life, requiring explicit labeling per MIL-STD-129 including manufactured and expiration dates. The item must be packaged in straight lengths within unit containers, complying with MIL-STD-2073-1E and DLA packaging standards, and shipped via traceable freight only—parcel post is prohibited. Inspection and acceptance occur at origin under SQAP MIL-DTL-8795, with sampling governed by MIL-STD-1916 or ASQ H1331 and zero-defect acceptance unless otherwise stated. All components must originate from qualified sources listed on approved QPL/QML lists, and ozone-depleting chemicals are strictly prohibited. The contract enforces tailored quality requirements, including inspection at origin, physical identification, and removal of government identification from non-accepted items. The NSN 4720010659360 is procured in single-unit quantities under multiple CLINs, with delivery due in 20 days FOB origin to Dyess Air Force Base, Texas, and pricing set at $1.00 per unit. A first article test is required as a separate line item, with the offeror deemed to include no separate charge unless specified, and full and open competition applies. All contractual documents integrate technical and quality mandates from the DLA Master List, and revisions are controlled by the solicitation or award date depending on acquisition size.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
CLAMP, WIRE ROPE, BOLTEDOfferors must comply with strict requirements regarding telecommunications equipment, domestic sourcing, and additive manufacturing under this solicitation. The offeror certifies that it will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must adhere to the Berry Amendment and Buy American Act restrictions, with the Berry Amendment threshold now set at $150,000. Any use of non-domestic materials requires full disclosure to the point of contact specified in the solicitation. Small business joint ventures must submit required representations for eligibility under designated small business categories. Fast Pay is not available for this procurement, and offerors are strongly encouraged to provide quantity ranges due to the fluctuating nature of purchase requests, enabling buyers to consolidate or adjust orders without resolicitation. Offers must be submitted through DIBBS, and those unable to submit by the closing date must file a “No Bid” with an anticipated quote date to avoid assumptions of non-responsiveness. Contractors must register via the new AMPS system within two months to gain access to the Vendor Shipment Module for shipping to DLA, and VSM WebServices users must update their internal schemas to maintain functionality. Offers containing items produced using additive manufacturing are ineligible for award unless prior approval is obtained from the contracting officer. The item under solicitation is a CLAMP, WIRE ROPE, BOLTED, NSN 4030-01-273-4636, with a single unit required and delivery expected 125 days after award, sourced from San Diego, California.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
PLASTIC ROUND SECTIThe contract pertains to the procurement of plastic round sections made of ultra-high-molecular-weight polyethylene (UHMW PE) in accordance with ASTM-D4020, with a nominal outside diameter of 1.625 inches and a nominal length of 4.000 feet, though the specified quantity is 8 feet total. The item is identified by NSN 9330-01-613-7901 and is procured under solicitation SPE8E5-26-T-3710, which incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website. Compliance with sampling procedures is mandatory, requiring adherence to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Zero non-conformances are required in sample lots unless otherwise stated, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item must be free from intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. The solicitation is open for response until August 10, 2026, with delivery expected within 20 days after delivery order, under a fully competitive procurement process managed by the Defense Logistics Agency, with point of contact Khue Nguyen at khue.nguyen@dla.mil.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
INSULATION, VEHICULAThis contract pertains to the procurement of three units of insulation panels for vehicle applications under solicitation SPE7L3-26-U-0656, with a delivery requirement within 80 days after award. The procurement is subject to stringent technical and quality standards, including compliance with the DLA Master List of Technical and Quality Requirements, SAE AS9100 for higher-level quality management, and MIL-STD-1916 or equivalent zero-based sampling protocols for inspection, where critical attributes must meet a detection level of VII or an AQL of 0.1. The supplier must adhere to strict export control regulations under ITAR or EAR, as the technical data associated with this item is restricted and cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce; access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal approval. Additionally, the use of Class I ozone-depleting chemicals is prohibited, and any proposed substitutes require prior approval. All government identification must be removed from non-accepted items, and inspections may be conducted at the origin. The contractor must be CMMC Level 2 certified as a Third-Party Assessment Organization, and all packaging must meet DLA-specific procurement standards. The point of contact for the acquisition is Stephen Weaver of the Department of Defense’s Land Supplier Operations Vehicle Support office, with all responses due by August 12, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
DOOR, HATCH, VEHICLEThe contract pertains to the procurement of one door, hatch, vehicle with NSN/Part Number 2510-01-644-5121, under solicitation SPE7L1-26-T-883Z, with a required delivery within five days of award. Full and open competition applies, and the item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect on the solicitation issue date. The item must not contain any Class I ozone depleting chemicals, and any substitute chemicals must be approved unless explicitly permitted by specification. Technical data associated with this item is subject to export controls under ITAR or EAR, and disclosure to foreign persons—regardless of location—is prohibited without prior authorization. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA-approved access may handle such technical data. Additionally, cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and all non-accepted supplies must have government identification removed prior to return. The place of performance is Fort Riley, Kansas, with Kristina Derry as the primary point of contact, and responses are due by August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METALThe contract pertains to the procurement of three metal hose assemblies with the NSN 4720-01-421-3228, under solicitation SPE7M4-26-T-290M, issued by the Department of Defense’s Fluid Handling Division. Delivery is required within 269 days from award, with performance to occur at New Cumberland, Pennsylvania, zip 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item is subject to export control under ITAR or EAR, meaning any technical data associated with it cannot be shared with foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Distribution of this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export-control training, submitted the DLA Export-Controlled Technical Data Questionnaire, and received formal approval from DLA to access the data. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the primary point of contact is Blake Tushar, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
TUBING, NONMETALLICThe contract pertains to the procurement of one unit of nonmetallic tubing identified by NSN 4720-01-631-4426 and part number 3114065C1, with a required delivery within five days of the contract award. The item must be supplied FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking per MIL-STD-129, with no special marking required. The tubing must be palletized according to DLA packaging requirements and shipped as a bulk break point to a U.S. Army facility in Powidz, Poland, with shipment routed by the fastest traceable means excluding parcel post. All technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The purchase request is 7017644018, the solicitation number is SPE7M0-26-T-20S, and the required delivery date is July 29, 2026. The contract is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with primary point of contact Abaigael Masterson. The unit of issue is each, and the item is classified under NAICS code 332999.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
CAB SIDE ASSEMBLYThe contract pertains to the procurement of one CAB SIDE ASSEMBLY with NSN 2510-01-524-4939, requiring delivery within ten days from the contract award under FOB origin terms with no tolerance for quantity variance. All packaging and labeling must adhere strictly to MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence over any other standards. The item must be packaged and palletized as specified in RP001, with the Unit of Issue being one each and confirmed by the specified Quantity per Unit Pack. Delivery is to be made to the designated military address at Camp Lejeune, North Carolina, using traceable freight methods only—parcel post is explicitly prohibited. The shipment is identified with RDD E, Project TP 2, and must be dispatched via a secure, trackable logistics channel with the provided military freight address and contact details. The required delivery date is March 23, 2026, and the solicitation is governed under contract number SPE7L1-26-T-886X, with all technical and quality obligations derived from the DLA Master List as of the solicitation issue date. The point of contact for inquiries is Kristina Derry, and the solicitation response deadline is August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336340
New
DIBBS
VALVE, BRAKE PNEUMATICThe contract is for the procurement of a pneumatic brake valve under solicitation SPE7L4-26-U-1022, with the NSN 2530-00-080-6834 and part numbers 277222N and 6-K-2092, sourced from BENDIX COMMERCIAL VEHICLE SYSTEMS LLC and CATERPILLAR INC. The quantity is 56 units, each priced at $56.00, for a total price of $3,136.00, with delivery required within 75 days FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically RP001 and IP025, superseding ASTM D3951. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA’s procurement standards. The material is not classified as hazardous under FED-STD-313, but all DLA technical requirements take precedence over commercial packaging guidelines. The solicitation is a total small business set-aside under NAICS code 336340, with responses due by August 12, 2026. Primary point of contact is Karryn Hoston of the Department of Defense, LSO Combat Vehicles and Armament, and the contract is administered under DLA Direct CONUS coverage.
Motor Vehicle Brake System Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOPThis contract, identified by solicitation number SPE7L4-26-U-1025, pertains to the procurement of CLAMP, LOOP with NSN 5340-00-664-3774, for a quantity of 616 units, under a total small business set-aside. The item is to be delivered FOB origin within 116 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply fully with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking aligned to MIL-STD-129 and no special marking required. The contract explicitly prohibits the use or incorporation of Class I ozone-depleting chemicals, overriding any conflicting specification requirements while maintaining all product performance standards. Substitute chemicals must be approved prior to use unless already authorized by the specification. The items are designated as critical application items with potential application of Covered Defense Information requirements. Only two approved suppliers are listed: SMITHS TUBULAR SYSTEMS-LACONIA, INC. and GE DBA GENERAL ELECTRIC COMPANY. The unit of issue is each, in accordance with DoD standards. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation issue or award date depending on acquisition size. The point of contact for inquiries is Karryn Hoston at the Department of Defense’s LSO Combat Vehicles and Armament office.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
HARNESS SET, AIRCRAFOfferors submitting quotations for solicitation SPE7L4-26-T-5853 must comply with strict regulations regarding domestic sourcing, telecommunications equipment, and manufacturing methods. The Berry Amendment and Buy American Act apply with a reduced threshold of $150,000, requiring full disclosure of any non-domestic materials used in the product. Offerors are prohibited from supplying covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must affirmatively represent compliance with these restrictions. Additive manufacturing is not permitted unless specifically approved in advance, and any offer containing AM-produced items will be deemed non-responsive. Due to fluctuating demand, offerors are strongly encouraged to quote using quantity ranges instead of fixed numbers to allow flexibility in award execution without additional administrative steps, though this does not apply to Auto IDC. All offers must be submitted through DIBBS, and those unable to quote by the closing date must submit a “No Bid” with an anticipated quote date or reason to avoid assumptions of non-responsiveness. Small business joint ventures must include required representations for eligibility categories including small business, service-disabled veteran-owned, WOSB, EDWOSB, and HUBZone. Contractors must register through DLA’s new AMPS system within two months to maintain access to the Vendor Shipment Module, and those using VSM WebServices must update their internal schema by the specified deadline or lose shipping capability. The contract is for a Harness Set, Aircraft, NSN 1680-01-729-8887, with a requirement of 23 units and a 365-day delivery window. Fast Pay is not applicable, and all inquiries should be directed to the designated point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STOThis contract pertains to the procurement of a box and accessories under NSN 2540-01-666-5848, with a quantity of eight units at a unit price of $8.00, totaling $64.00. The delivery is to be made FOB origin within 100 days, with no tolerance for quantity variance—exactly eight units must be supplied. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s master technical and quality requirements, superseding ASTM D3951 when applicable. Hazardous materials must be packaged per Fed-Std-313 and TQ requirement IP025; non-hazardous items must follow ASTM D3951 unless overridden by DLA standards. All packaging and labeling must adhere to MIL-STD-129, and palletization must conform to DLA Packaging Requirements RP001. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with specific instructions for transportation referenced in DLAD Proc Notes C19 and C20. The required ship date and original delivery date are both November 19, 2026, under solicitation SPE7L4-26-T-5847, issued by the Department of Defense’s LSO Combat Vehicles and Armament office.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
HEATING-VENTILATIONThe contract pertains to the procurement of a single unit of heating-ventilation equipment, identified by NSN 2540-20-010-9227 and part number 13-12903, with a required delivery within five days of award. The item must be shipped FOB origin via the fastest traceable means, explicitly prohibiting parcel post, and delivered to the Maritime Prepositioning Force at Blount Island, Jacksonville, Florida. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951; if deemed non-hazardous per FED-STD-313, commercial packaging per ASTM D3951 is acceptable only if not overridden by a DLA requirement, and if hazardous, packaging must meet TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, with palletization strictly following RP001 specifications, and the unit of issue is one each. The contract includes no quantity variance and requires inspection and acceptance at destination. The solicitation number is SPE7L4-26-T-5849, with a response deadline of August 10, 2026, and the required delivery date is July 28, 2026. Point of contact for inquiries is Anna-Rachelle Betts, and the contracting office operates under the Department of Defense, specifically LSO Combat Vehicles and Armament. All technical and quality provisions referenced via R or I numbers are governed by the current edition of the DLA Master List accessible online, with revisions tied to the solicitation or award date depending on acquisition size.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CAP, FILLER OPENINGThis contract specifies the procurement of a CAP, FILLER OPENING with NSN 5340-01-606-8636 and part number 1009833, under solicitation SPE7L4-26-U-1028, with a fixed unit price of $17.00 per EA for a total of 17 units. The quantity is exact with no variance allowed, and delivery must be completed within 116 days FOB origin to an undefined location within the Continental United States. Inspection and acceptance occur at the destination. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, referencing RP001 and TQ requirement IP025, and must adhere to MIL-STD-129 for marking and labeling. If the item is non-hazardous under FED-STD-313, commercial packaging per ASTM D3951 is permitted only if not superseded by higher-priority DLA requirements. Palletization must follow DLA’s packaging guidelines, and the Unit of Issue and Quantity per Unit Pack must match contract specifications. The item is classified under NAICS 332510 and is procured by the Department of Defense through LSO Combat Vehicles and Armament. The prime point of contact is Heather Kessler, with responses due by August 12, 2026.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
CLUTCH ASSEMBLY, FRIThe contract solicitation SPE7L4-26-T-5846 calls for the procurement of nine clutch assemblies friction type, identified by NSN 2520-00-426-5294, with a delivery requirement of 20 days after award. This is a total small business set-aside under FAR 19.5, with the NAICS code 336350, and is issued by the Department of Defense through the LSO Combat Vehicles and Armament office. The item is governed by a source-controlled drawing that restricts approval to currently cited suppliers, though additional approved sources may exist and are not yet reflected. Offerors must ensure compliance with all referenced technical and quality requirements from the DLA Master List, and must not use any class I ozone-depleting chemicals in manufacturing or delivery. All technical data associated with this item is subject to export controls under ITAR or EAR, requiring strict adherence to DFARS 252.225-7048, and access is limited to contractors with approved JCP certification, completed DLA training, and authorization from the controlling authority. Configuration changes require formal engineering change proposals, and items must be physically marked per RQ017 requirements. Government identification must be removed from rejected supplies, and all packaging must comply with DLA standards. Responses are due by August 10, 2026, with inquiries directed to Anna-Rachelle Betts at the provided contact information.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
PIN, PINTLEThe contract specifies the procurement of a PIN PINTLE with NSN 2540-01-696-0708 and part number 201332003, for a quantity of 28 units at a unit price of $28.00, resulting in a total price of $784.00. Delivery is required within 147 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the items must be packaged in strict compliance with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes. Marking must adhere to MIL-STD-129 without special identification codes. The delivery address is the DLA Distribution center in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract references technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size, and all packaging must meet DLA’s RP001 standards including palletization requirements. The solicitation number is SPE7L4-26-T-5845, posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 336360, and the primary point of contact is Anna-Rachelle Betts at DLA.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336330
New
DIBBS
INSTALLATION KIT, VEThe contract solicitation is for an Installation Kit, VE with NSN 2530-01-734-9593, requiring a quantity of 20 units, under Purchase Request 7017227929. The procurement is governed by technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed via the official DLA eProcurement website; the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging requirements, and non-accepted supplies must have all government identification removed, with no data currently available—requiring the alternate offeror to submit a complete data package including details for both the approved and alternate part. The delivery timeline is 171 days after award, with performance to occur at New Cumberland, Pennsylvania, 17070-5002. The solicitation number is SPE7L4-26-T-5168, posted on July 28, 2026, with responses due by July 31, 2026. The NAICS code is 336330, and the contracting activity is under the Department of Defense, LSO Combat Vehicles and Armament, with Ryan Hammond listed as the primary point of contact via email and phone.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336330
New
DIBBS
INSTALLATION KIT, VEThe solicitation is for an Installation Kit, VE with NSN/Part Number 2530-01-734-9593, requiring a quantity of 10 units to be delivered within 72 days of award. The contract is issued under solicitation number SPE7L4-26-T-4124, with a response deadline of July 31, 2026, and was posted on July 28, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and all non-accepted supplies must have government identification removed. The offeror must submit a complete data package for both the approved and alternate parts, as no data is currently available. The North American Industry Classification System code is 336330, and the contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with performance required at New Cumberland, Pennsylvania. Primary point of contact is Ryan Hammond, reachable via email and phone provided.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract involves the procurement of 145 flat washers identified by NSN 5310-01-576-6762, with a requirement for physical identification and bare item marking as specified under RQ017. The purchase request number is 1000238448, and delivery is expected within 32 days from award. The solicitation number is SPE7L4-26-U-1024, posted on July 28, 2026, with a response deadline of August 12, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332722, and is managed by the Department of Defense through the LSO Combat Vehicles and Armament office. The point of contact for inquiries is Karryn Hoston, reachable via phone at 6145818970 or email at karryn.hoston@dla.mil. The contract is issued through the DLA’s DIBBS platform, and performance is expected to be carried out within the United States without a specified city or state location.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
GUARD, SPLASH, VEHICULARThe contract specifies the procurement of 200 units of BLACK RUBBER GUARD, SPLASH, VEHICULAR with NSN 2540-01-338-4621 and DAIMLER TRUCK NORTH AMERICA LLC part number 22-79237-001 under solicitation SPE7L4-26-U-1021. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, with palletization adhering to RP001 DLA Packaging Requirements. If the item is classified as hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging consistent with ASTM D3951 is acceptable, subject to DLA requirements. The item is to be delivered FOB origin within 80 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is a Total Small Business Set-Aside under NAICS code 336390, with unit of issue EA and total price calculated at the specified unit price for 200 units. This is an estimated quantity subject to change by the IDC.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details