Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSULATOR, PLATE

Active
SPE4A6-26-T-070GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of an insulator plate with part number A17-12137-001 and NSN 5970-01-333-1156, totaling 73 units, under solicitation SPE4A6-26-T-070G. The item is classified as a critical application item and must comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging requirements, with hazardous material handled per TQ requirement IP025 and non-hazardous material packed according to ASTM D3951 unless overridden by DLA standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Delivery is FOB origin with a 171-day acceptance delivery window, targeting May 17, 2026 for shipping and June 17, 2026 for original delivery, with no variance in quantity allowed. Inspection and acceptance occur at destination, and all items must be marked and labeled per government requirements, including removal of government identification from non-accepted supplies. The unit of issue is each, and the delivery address is DLA Distribution Red River in Texarkana, Texas, with transportation governed by DLAD procedures C19 and C20. The point of contact is Marcita Robinson of the ASC Commodities Division.

General Info

73 insulator plates A17-12137-001, critical application, DLA standards, FOB origin, delivery by June 17, 2026, to Texarkana, Texas.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-070G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Marcita Robinson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATOR,PLATE
INSULATOR,PLATE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FREIGHTLINER CORP
CAGE 64678
P/N A17-12137-001
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICATION LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
"DLA does not have a bidset available"
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
DAIMLER TRUCK NORTH AMERICA LLC 64678 P/N A17-12137-001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://www.dla.mil/Portals/104/Documents/DLMS/eApplications/LogDataAdmin/ UnitofIssueandPurchaseUnit.xlsx
SPE4A6-26-T-070G
SECTION B
PR: 7014546865 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014546865 0001 EA 73.000
NSN/MATERIAL:5970013331156
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:05/17/2026 Original Required Delivery Date:06/17/2026
SPE4A6-26-T-070G NSN/Part Number: 5970-01-333-1156 Quantity: 73 EA Purchase Request: 7014546865QTY: 73 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Supply of Permanent Magnets (NSN: 5340011431263)The contract is for the supply of 515 units of permanent magnets identified by NSN 5340011431263, requiring full compliance with DLA technical, packaging, and quality standards. It is classified as a commercial item acquisition with FOB origin delivery terms, meaning the vendor assumes responsibility for the goods until they are loaded at the origin point, after which acceptance occurs at the destination. The solicitation is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by FAR 19.5, and falls under NAICS code 335999 for other electrical equipment and component manufacturing. The contract was posted on August 3, 2026, with proposals due by August 18, 2026, and is issued as a subcontract under the U.S. Department of Defense’s Strategic Acquisition Program Directorate. All deliveries must meet the specified requirements without deviation, and the place of performance and point of contact details are not provided in the available data.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4402
The contract is for the procurement of two power supply units identified by NSN 6130014614359 and part number AW50S/28-A-ER, issued under solicitation SPE7L7-26-T-4402 by the Defense Logistics Agency. Delivery is due 182 days after receipt of order, with an original required delivery date of October 14, 2026, and a need ship date of February 2, 2027. Items are to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container types as defined in the packaging data. Marking and labeling must adhere to MIL-STD-129, employing machine-readable bar codes, with no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware unless explicitly exempted for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or specific chemical reagents, with portable mercury-containing items requiring shockproof construction and a second containment boundary per NAVSEA 5100-003D. Sampling and quality control require compliance with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with all unspecified attributes treated as major. Acceptance criteria mandate zero non-conformances in the sample lot unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for sample size determination, not acceptance thresholds. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The contractor must comply with extensive federal and defense regulations including hazardous material handling under 29 CFR 1910.1200, prohibitions on hexavalent chromium, trafficking in persons, employment eligibility verification, and safeguarding covered defense information per NIST SP 800-171 and DFARS 252.204-7012. Payment is to be processed exclusively via Wide Area WorkFlow (WAWF), and the contract includes provisions for accelerated payments to small business subcontractors and restrictions on mandatory arbitration. All subcontracting activities must meet commercial product and
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE7LX-26-U-9177
The contract pertains to the procurement of a BOOT, DUST AND MOISTURE SEAL with NSN 5340-01-128-6056 and part number 207W223-3-01-0, for a quantity of 378 units at a unit price of $378.00, resulting in a total price of $142,884.00. Delivery is required within 75 days FOB origin with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951 where applicable, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow RP001 DLA Packaging Requirements, with hazardous materials complying with TQ requirement IP025 per FED-STD-313 and non-hazardous items packaged commercially in accordance with ASTM D3951, unless overridden by a higher-priority DLA requirement. Palletization must conform to RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Covered Defense Information provisions may apply, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), consistent with DoD standards, and all technical and quality requirements referenced via R or I numbers are incorporated by reference from the DLA Master List. The solicitation number is SPE7LX-26-U-9177, issued with a response deadline of August 18, 2026, and the contracting office is the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7LX-26-U-9216
This contract is for the procurement of 39 power supply units under solicitation SPE7LX-26-U-9216, with a delivery timeline of 34 days FOB origin, and no variance allowed in quantity. The items are identified by NSN 6130-01-612-4130 and must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following defined standards. All units must be marked and labeled per government specifications, and any government identification on non-accepted supplies must be removed. The contract mandates zero-defect acceptance criteria under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels or AQLs of VII, IV, and II respectively. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling rules. Mercury and mercury-containing compounds are prohibited from direct contact with equipment except for specific exempted uses such as batteries, fluorescent lamps, sensors, and naval instrumentation, with portable mercury-containing devices required to have shockproof construction and secondary containment. Inspection and acceptance occur at destination, and the unit of issue is each (EA). The contract is issued under DLA Direct CONUS procurement authority with sole point of contact Theodore Misiolek.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE7M2-26-Q-0702
This contract specifies the procurement of electrical insulation sleeving identified by NSN 5970-00-954-1624, with a total quantity of 15,111 feet to be delivered under a firm fixed price arrangement with no variance allowed in quantity. The item is classified as a commercial item and a critical application item, requiring compliance with SAE AS23053C Revision C dated November 1, 2023, and referenced technical documents. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, including marking in accordance with MIL-STD-129 without special标识, and palletization as per RP001. Inspection and acceptance occur at destination with delivery required within 150 days after award. The product is subject to strict environmental prohibitions: no mercury or mercury-containing compounds may be intentionally added or come in direct contact, except for specific exemptions such as batteries, fluorescent lamps, and weapon systems, with portable devices requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely prohibited. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances permitted unless otherwise stated, with attributes assigned specific verification levels or AQLs. The item may require components from qualified products or manufacturers lists, and covered defense information provisions apply. Unit of issue and purchase unit alignment is guided by DLA’s official reference. The contract incorporates all technical and quality requirements from the DLA Master List, with revisions tied to the solicitation or award date. Item unique identification is not required per the service customer’s request.
NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CONDUIT, METAL, FLEXIBLE
Solicitation # SPE7M2-26-T-5963
The contract is for the procurement of 2,320 feet of metal flexible conduit designated by NSN 5975-01-214-1357, with delivery required within 164 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is classified as a commercial off-the-shelf product and must be supplied in a single continuous length, with the packaging and labeling strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Packaging must use unit container E5, with no cushioning or dunnage, and the total length must be clearly marked on each unit. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds in the product, its preservation, packaging, or marking, with exceptions limited to specific functional components like batteries or instruments as defined by NAVSEA, which must also include a secondary containment boundary. The delivery is FOB origin, with a 10% quantity variance allowed, and inspection and acceptance occur at the destination. Only authorized suppliers with approved part numbers are qualified to fulfill this requirement, and the item is flagged as a critical application item. Shipping instructions follow DLAD Proc Note C19 and C20, with the original required delivery date set for January 21, 2028, and an anticipated ship date of January 26, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the advice code dictates packaging format compliance, with continuous length being mandatory for certain codes. The solicitation number is SPE7M2-26-T-5963, issued under the NAICS code 335999 by the Department of Defense’s Nuclear Reactor Program, with David Larsen as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A0-26-T-4049
The contract is for the procurement of one electrical special-purpose cable assembly identified by NSN 6150015996318 and part number 40009951-017 from L3 Technologies, Inc., under solicitation SPE4A0-26-T-4049. Delivery is required within five days after award to Mihael Kogalniceanu Air Base in Romania, with FOB origin terms, inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including cleaning and drying per preservation method 10 with no preservation material, and labeled per MIL-STD-129 with no special marking required. Palletization follows DLA’s RP001 packaging requirements. Sampling and inspection criteria mandate zero non-conformances unless otherwise specified, using MIL-STD-1916, ASQ H1331 Table 1, or comparable zero-based sampling plans; unspecified attributes are treated as major with verification levels or AQLs aligned to critical, major, and minor classifications. Cybersecurity compliance is mandatory, requiring the contractor to meet CMMC Level 2 self-assessment standards and safeguard covered defense information under DFARS 252.204-7012, with NIST SP 800-171 assessment requirements enforced through deviation 2026-O0025. The contract incorporates DLA’s Master List of Technical and Quality Requirements referencing R and I numbers, and hazardous materials must be identified and labeled per DFARS 252.223-7001 with accompanying Safety Data Sheets. Contractor representations must include UEI and CAGE codes, socioeconomic status affirmations for small business programs, and compliance with trafficking in persons, employment eligibility, and equal opportunity clauses. Payment processing is exclusively through WAWF, and pricing is not specified in the solicitation, though the delivery schedule is tightly constrained with an original required delivery date of July 20, 2026. All contractual obligations, including cybersecurity, packaging, marking, and hazardous material handling, are subject to government inspection at the final destination with full accountability for non-conforming supplies.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-11JT
This contract specifies the procurement of electrical insulation tape with the part number AA59474 Type I Class 4, measuring 1.375 inches wide and 108 feet long, identified by the NSN 5970-00-067-6527. The item is classified as a critical application product with a non-extendable shelf life of 18 months under Type I Code K requirements, and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, with marking following MIL-STD-129 and special shelf-life labeling Code 32. The tape is to be delivered in two roll units (RO), with no variance allowed in quantity, and shipment must occur FOB origin within 20 days of the contract award. Inspection and acceptance are both to be conducted at the origin, using a zero-defect sampling plan aligned with MIL-STD-1916 or ASQ H1331, and all measuring and test equipment must be calibrated and traceable. The supplier must hold an ISO 9001:2015 certified quality management system and comply with all non-tailored higher-level quality requirements applicable to manufacturers. The item is subject to strict traceability requirements—parcel post is prohibited, and shipments must use traceable means. The contract requires compliance with DLA’s unit of issue and purchase unit specifications, with packaging configured in unit containers of 36 yards each. The delivery address is the Defense Logistics Agency facility in Birmingham, Alabama, with specific palletization, container codes, and labeling instructions provided. The original required delivery date is July 28, 2026, and the contract solicitation was issued under SPE4A6-26-T-11JT with a response deadline of August 11, 2026. Government use only codes and contact information for Angela Boyce are provided for administrative and logistical coordination.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-02JB
The contract is for the procurement of insulation sleeving with the NSN/part number 5970-01-428-6278, requiring a quantity of five units. The solicitation number is SPE4A6-26-T-02JB, issued by the Defense Logistics Agency under the Department of Defense, and it was posted on July 1, 2026, with a response deadline of July 9, 2026. The North American Industry Classification System code for this solicitation is 423330, indicating it pertains to wholesale merchant trade in electrical and electronic equipment. This is a federal procurement action without a specific set-aside designation, meaning it is open to all eligible contractors. The place of performance and point of contact details are not provided, and the procurement is being managed through the DIBBS system, with the official solicitation accessible via the provided link.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
CONDUIT ASSEMBLY, ME
Solicitation # SPE4A7-26-T-607T
This contract specifies the procurement of a metal flexible conduit assembly under solicitation SPE4A7-26-T-607T, with a single line item for 40 units at a unit price of $40.00, totaling $1,600.00. The item is identified by NSN 5975-01-532-5222 and part numbers 11477937 and 750NA101NF24-240, manufactured to Technical Data Package Revision A, Gen 3, per Reference Drawing 18876 dated February 12, 2004, with a future revision effective May 19, 2026. Delivery is required within 95 days of order, FOB origin, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-129 and DLA-specific requirements, prioritizing DLA’s Master List of Technical and Quality Requirements over commercial standards like ASTM D3951. Hazardous materials must follow FED-STD-313 and TQ requirement IP025; non-hazardous items must be packaged per ASTM D3951 only if not superseded by DLA rules. Palletization, marking, and identification adhere to RP001, RQ011, and RQ017, with configuration changes governed by RQ002 and test equipment requirements under RT001. Sampling for quality assurance shall follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are classified as critical, major, or minor with corresponding verification levels or AQLs. The contract incorporates all applicable requirements from the DLA Master List, controlled by the solicitation issue date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics reference DLAD Proc Notes C19 and C20. The required ship date is November 15, 2026, with an original delivery deadline of January 3, 2027. The contract is issued under DoD authority, uses the unit of issue as defined in DLA’s official documentation, and is managed by the Department of Defense, with Dedrick Benson as the primary point of
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, BEAD
Solicitation # SPE4A6-26-T-09QQ
The contract is for the procurement of one unit of an insulator, bead, identified by NSN 5970-01-494-0520 and part number 17-1-6807 from Victor Microwave, Inc., with delivery required within five days of award to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The item is classified as a critical application item and must be delivered FOB origin with no quantity variance allowed. Packaging must strictly comply with MIL-STD-2073-1E, using preservation method 10 (cleaning and drying, level 1), and be marked in accordance with MIL-STD-129 using packaging code E5 and no special marking. Palletization must adhere to DLA packaging requirements, and shipment must occur via the fastest traceable means, excluding parcel post. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise specified. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. The contract incorporates technical and quality requirements referenced from the DLA Master List, and contractors must comply with all applicable FAR and DFARS clauses including cybersecurity controls per NIST SP 800-171, safeguarding of covered defense information, compliance with hazardous materials regulations, and employment eligibility verification through E-Verify. The contract requires submission of a Unique Entity ID and CAGE code, and offerors must certify their small business status and socioeconomic designations if applicable. Invoicing must be processed electronically via Wide Area WorkFlow, with no alternative methods permitted. No pricing details are provided in the solicitation, and the basis of award is not explicitly stated, though the presence of technical and quality requirements suggests a potential trade-off evaluation. The solicitation closes on August 6, 2026, and must be submitted through the DLA DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4446
The contract pertains to the procurement of a military power supply with NSN 6130016786415 under solicitation SPE7L7-26-T-4446, requiring delivery of 14 units to the DLA New Cumberland Facility in Pennsylvania by January 19, 2027, with a performance window of 168 days after order. Delivery is FOB origin, and inspection and acceptance occur at the destination, governed by strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and barcoding, including Data Matrix compliance for traceability. The packaging must adhere to RP001 DLA packaging directives, with preservation method 41 (climate control/dry), unit container D3, intermediate container E5, and pack code U, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-conformance acceptance level unless otherwise directed, where critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, and unspecified attributes default to major. The power supply must be manufactured by either Laurel Technologies Partnership P/N 8479734-1 or Eaton Corporation P/N APR48-ES, and all materials must comply with applicable hazardous material labeling per 29 CFR 1910.1200 and specific requirements for items exceeding 0.002 microcuries per gram or 0.01 microcuries per item under FAR 52.223-7, necessitating prior notification to the Contracting Officer. The contract includes numerous FAR and DFARS clauses governing employment practices, cybersecurity safeguards, trafficking in persons, sustainable procurement, subcontracting, inspection, default, and prohibitions on covered defense telecommunications equipment, and compliance with NIST SP 800-171 assessment requirements. Payment must be submitted electronically via WAWF, and the contractor must maintain a Unique Entity Identifier and CAGE code, with representations regarding socioeconomic status, size, and compliance with whistleblower rights and labor protections required. All technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, accessible online, and deviations are noted for specific clauses, particularly those relating to cybersecurity and subcontracting. No pricing details beyond quantity were provided in Section B, and no evaluation
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541611
New
DIBBS
Traceability Documentation and DART Database SubmissionThe contract requires the maintenance and submission of complete traceability records for airworthiness parts through the DLA Automated Records Traceability DART database, ensuring full accountability from manufacturing through to final use. This includes the accurate uploading of manufacturer information, lot-level traceability data, and all relevant test results to meet stringent defense aviation standards. The obligation extends to timely and error-free documentation to support regulatory compliance and operational readiness across the Department of Defense supply chain. This subcontract is issued under NAICS code 541611 and is active with a response deadline of August 17 2026 and a posted date of August 3 2026. It is managed by the ASC Commodities Division under the Department of Defense and requires strict adherence to DART protocols without reliance on external or paperbased systems. There is no designated set aside classification and no specific performance location listed indicating the work may be performed remotely or at any qualifying facility meeting federal traceability requirements. Failure to comply with data submission timelines or accuracy standards will result in contract noncompliance.
Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Compliance (CMMC Level 2)The contract requires implementation and self-assessment for CMMC Level 2 compliance to safeguard Controlled Unclassified Information related to design, manufacturing, and testing data. It applies specifically to systems that handle technical data and traceability records, ensuring that appropriate security controls are in place to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must align with the CMMC framework’s requirements to achieve and maintain compliance, which includes documenting policies, conducting internal assessments, and demonstrating readiness for potential audits. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026. The performance location is not specified, and there is no set-aside designation. The contract is accessible via a public DIBBS portal, and while a point of contact is not provided, responsible parties are expected to adhere to all CMMC Level 2 controls and maintain ongoing compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-2073-1E and MIL-STD-129 Packaging and MarkingAll units must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, encompassing detailed preservation methods designated as PRES MTHD: 10, and requiring accurate lot and serial number labeling, CAGE code marking, and barcoding for traceability and inventory management. Palletization must adhere to DLA RP001 specifications to ensure uniformity, stability, and readiness for handling and transport within the Department of Defense logistics network. This subcontract is issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with responses due by August 17, 2026, and performance expected to support military supply chain requirements regardless of specific geographic location.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Acceptance Testing
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Transportation of Government-Furnished Property
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811411
New
DIBBS
Military-Compliant Marking and Labeling
Home and Garden Equipment Repair and Maintenance

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation of Shackle for Military Shipment
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
Precision Forging of Shackle Component
Iron and Steel Forging

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.
Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541511
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.
Custom Computer Programming Services

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details