Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSULATOR, WASHER

Active
SPE4A6-26-T-11MKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 300 insulator washers with NSN 5970-01-419-8508 under solicitation SPE4A6-26-T-11MK, with a delivery requirement of 20 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to stringent quality controls including tailored higher-level contract quality requirements, physical identification and bare item marking, and the removal of government identification from non-accepted supplies. Packaging must comply with DLA standards, and cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors. Export control regulations under ITAR or EAR apply to associated technical data, restricting access and disclosure to authorized entities, including prohibiting unauthorized export to foreign persons regardless of location. Only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access controlled technical data. The place of performance is in Bremerton, Washington, and the point of contact is Victoria Burcham of the ASC Commodities Division within the Department of Defense.

General Info

Procure 300 insulator washers NSN 5970-01-419-8508, deliver in 20 days, CMMC Level 2, ITAR/EAR controlled, Bremerton, WA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

1400 FARRAGUT AVE, BREMERTON, WA, 98314-5001, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11MK.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
VICTORIA BURCHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATOR,WASHER
INSULATOR, WASHER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5970-01-419-8508 Quantity: 300 EA Purchase Request: 7017523641QTY: 300 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Supply of Machine Screws (NSN 5305000667327)The contract pertains to the supply of 977 standardized machine screws identified by NSN 5305000667327, with all items required to meet military-specific packaging, marking, and inspection standards to ensure compatibility and reliability in defense applications. The order is issued under a subcontract arrangement by the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 332722, which classifies the manufacturing of screws, nuts, and bolts. Although the solicitation number and point of contact are not provided, the contract was posted on August 3, 2026, and the place of performance and office address details remain unspecified. The goods must adhere strictly to military specifications for quality assurance and logistical integration, and the procurement is managed through the DIBBS platform under contract number SPE7M226V4554. The requirement reflects a targeted, low-volume acquisition critical to sustaining military equipment readiness.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Self-Locking Hexagon Nut SupplyThe contract involves the annual supply of 5,827 self-locking hexagon nuts that must meet rigorous military specifications and packaging standards, ensuring reliability and compatibility for defense applications. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense logistics. The NAICS code 332722 identifies the industry as Other Metal Valve and Pipe Fitting Manufacturing, aligning the supplier’s capabilities with precision metal component production. The solicitation was posted on August 3, 2026, with a firm response deadline of August 18, 2026, allowing potential vendors a two-week window to prepare and submit proposals. The contracting activity originates from the Strategic Acq Program Directorate under the Department of Defense, indicating the critical nature of the component for military systems. Although specific delivery locations and point of contact details are not provided, the contract is accessible through the DIBBS platform, where full technical and procedural requirements can be obtained. Packaging and compliance with military standards are central to the award decision, emphasizing quality control and traceability throughout the supply chain.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE7M0-26-T-027Y
The contract specifies the procurement of 8 packages of hexagon head cap screws, NSN 5305-01-528-7654, under solicitation SPE7M0-26-T-027Y, with a required delivery date of July 14, 2026, and a five-day delivery window from origin FOB. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951, and must be packaged and labeled per MIL-STD-129 and RP001 packaging guidelines. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. The screws are to be delivered to the Puget Sound Naval Shipyard in Bremerton, WA, shipped via the fastest traceable means, excluding parcel post, and must adhere to strict identification and marking requirements including physical indentification and removal of government identifiers from non-accepted items. The contract enforces a zero variance in quantity and specifies the unit of issue as PG, with palletization, packaging, and labeling fully aligned with DLA standards. The point of contact is Rocio Mino, and the solicitation was posted August 3, 2026, with responses due by August 11, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-11KT
The contract is for 11 units of a hexagon cap screw identified by NSN 5305-01-710-8361, with a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. The solicitation number is SPE4A6-26-T-11KT, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332722, and performance is to occur in Tracy, California, with primary point of contact Molitauoleava Langi.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L1-26-Q-1431
The contract is for the procurement of 126 units of STRAP, WEBBING with NSN 5340-01-590-9210 under solicitation SPE7L1-26-Q-1431, issued by the Department of Defense’s Land Supply Chain. The item is classified as a Critical Application Item and must comply with Technical Data Package Rev C Gen 3 as referenced to drawings 19207 with specified part numbers and revision dates. Pricing is firm fixed price with zero variance allowed in quantity, and delivery is required within 114 days after contract award. Inspection and acceptance occur at destination, with FOB origin terms governing transportation responsibility. Packaging must adhere to DLA-specific requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials, with precedence granted to the DLA Master List of Technical and Quality Requirements over ASTM standards. Hazardous materials, if applicable, must follow FED-STD-313 and TQ requirement IP025. Palletization must conform to RP001 DLA Packaging Requirements, and the unit of issue is EA. The contract mandates compliance with CMMC Level 2 Cybersecurity Self-Assessment and applies Covered Defense Information requirements. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and attributes must be verified at designated levels: VII for critical, IV for major, and II for minor, with corresponding AQLs of 0.1, 1.0, and 4.0. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized in the specification. The item must be marked per MIL-STD-130N and shipped to the designated DLA distribution facility in New Cumberland, PA. All documentation and compliance obligations must be met in full, with procurement governed by full and open competition and no set-aside provisions. The delivery window aligns with a government need date of January 1, 2027, and point of contact is Robert Warne at DLA.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9180
The contract solicitation seeks 25 units of COVER ACCESS under NSN 5340-01-575-2104, with a delivery requirement of 73 days after award and a total purchase request value of 1000238778. It is issued under solicitation number SPE7LX-26-U-9180, posted on August 3, 2026, with responses due by August 18, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, targeting NAICS code 332722. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identifiers removed prior to return. The awarding organization is the Strategic Acquisition Program Directorate within the Department of Defense, with point of contact being Theodore Misiolek, reachable via email and phone provided. The place of performance and office address are not specified beyond the country being the United States, and all bid information is accessible through the DIBBS system.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A7-26-T-607H
This contract is for the procurement of 12 plain studs with NSN 5307-01-457-2738 and part number 399-84-1022, supplied by Buffalo Pumps Inc and Air & Liquid Systems Corporation, both under DLA supplier code 83130. The items are classified as critical application components and must be delivered FOB origin within 173 days of the contract award, with no variance allowed in quantity. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly follow MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must comply with MIL-STD-129 without special markings. Mercury or mercury-containing compounds are strictly prohibited in any part of the product, its packaging, preservation, or labeling, except for specific functional uses such as batteries, fluorescent lamps, sensors, and instruments defined by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. All documentation, unit of issue, and transportation details are governed by DLA procedures and referenced directives.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-R-X800
The contract solicitation SPE4A6-26-R-X800 outlines the procurement of 271 machine bolts, NSN 5306-01-564-3371, designated as a Critical Safety Item under Navy identification, requiring stringent quality and traceability controls. The items must be manufactured in compliance with SAE AS9100 quality standards and referenced engineering drawings, with mandatory correction of a weight discrepancy on part number 70400-38159 for MP-35N material. Inspection and acceptance occur at origin, with sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified. Critical attributes are assigned verification levels VII, IV, and II (AQLs 0.1, 1.0, 4.0), while unspecified attributes are treated as major. First Article Testing is required, with government inspection and testing responsibilities clearly defined. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with each unit packed to include lot and serial numbers, contractor and manufacturer CAGE codes, and part number; special marking is not required. Palletization follows DLA Packaging Requirements RP001. The contract includes cybersecurity compliance under CMMC Level 2 self-assessment and mandates defense information handling under RD002. The delivery schedule requires full delivery in 476 days ADO, with separate line items for government test units requiring delivery in 210 and 296 days. All pricing is firm fixed price with zero variance allowed. The contract incorporates FAR clauses for changes, subcontracting, ethics, whistleblower protections, quality assurance, and first article testing, while DFARS clauses address counterfeit part avoidance, electronic sourcing, and safeguarding of controlled unclassified information. Invoicing must be submitted electronically via WAWF, and the estimated contract value ceiling is $350,000, though specific unit prices remain unspecified. The item is destined for Fleet Readiness Center East in Cherry Point, NC, and the contract is subject to DPAS priority rating. Waivers and deviations require formal approval from the DSC Contracting Officer, and all supplies must be traceable through DART for airworthiness parts.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7MC-26-T-096Z
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-910M
The contract pertains to the procurement of COVER, ACCESS with NSN 5340-01-434-4698, requiring a quantity of 2,057 units to be delivered within 99 days of award. The solicitation number is SPE7L1-26-T-910M, issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency, with a response deadline of August 14, 2026. Compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements is mandatory, as the vendor must be a certified Third-Party Assessment Organization. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on procurement scale. Export control regulations under ITAR or EAR strictly apply to associated technical data, restricting dissemination to entities with approved U.S./Canada Joint Certification Program credentials, completed DOD export training, and DLA authorization. DFARS 252.225-7048 governs handling of this controlled information, extending to all personnel including foreign nationals and subsidiaries. The place of performance is designated as Texarkana, Texas, with Isabelle Szulewska as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541611
New
DIBBS
Traceability Documentation and DART Database SubmissionThe contract requires the maintenance and submission of complete traceability records for airworthiness parts through the DLA Automated Records Traceability DART database, ensuring full accountability from manufacturing through to final use. This includes the accurate uploading of manufacturer information, lot-level traceability data, and all relevant test results to meet stringent defense aviation standards. The obligation extends to timely and error-free documentation to support regulatory compliance and operational readiness across the Department of Defense supply chain. This subcontract is issued under NAICS code 541611 and is active with a response deadline of August 17 2026 and a posted date of August 3 2026. It is managed by the ASC Commodities Division under the Department of Defense and requires strict adherence to DART protocols without reliance on external or paperbased systems. There is no designated set aside classification and no specific performance location listed indicating the work may be performed remotely or at any qualifying facility meeting federal traceability requirements. Failure to comply with data submission timelines or accuracy standards will result in contract noncompliance.
Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Compliance (CMMC Level 2)The contract requires implementation and self-assessment for CMMC Level 2 compliance to safeguard Controlled Unclassified Information related to design, manufacturing, and testing data. It applies specifically to systems that handle technical data and traceability records, ensuring that appropriate security controls are in place to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must align with the CMMC framework’s requirements to achieve and maintain compliance, which includes documenting policies, conducting internal assessments, and demonstrating readiness for potential audits. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026. The performance location is not specified, and there is no set-aside designation. The contract is accessible via a public DIBBS portal, and while a point of contact is not provided, responsible parties are expected to adhere to all CMMC Level 2 controls and maintain ongoing compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-2073-1E and MIL-STD-129 Packaging and MarkingAll units must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, encompassing detailed preservation methods designated as PRES MTHD: 10, and requiring accurate lot and serial number labeling, CAGE code marking, and barcoding for traceability and inventory management. Palletization must adhere to DLA RP001 specifications to ensure uniformity, stability, and readiness for handling and transport within the Department of Defense logistics network. This subcontract is issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with responses due by August 17, 2026, and performance expected to support military supply chain requirements regardless of specific geographic location.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
DIBBS
Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.
Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541511
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.
Custom Computer Programming Services

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing and WAWF Compliance SupportThis contract requires the preparation and submission of electronic invoices through the Wide Area Workflow system with full compliance to Federal Acquisition Regulation clauses and seamless integration support to ensure accurate and timely processing. The work must be performed under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 541512 indicates the scope centers on computer systems design services, specifically within the realm of invoicing and financial data systems. The opportunity was posted on August 3, 2026, with submissions due by August 13, 2026, and is issued under the ASC Commodities Division of the Department of Defense, where performance is expected to align with federal electronic invoicing standards and system requirements, regardless of a specified physical location. All bidders must demonstrate proven capability in WAWF integration, proper FAR clause representation, and the technical infrastructure to handle secure, compliant electronic invoicing for government contracts.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Military-Grade Inspection and Acceptance ServicesThe contract requires comprehensive origin-based inspection and acceptance testing for critical components, strictly adhering to MIL-STD-1916 or ASQ Z1.4 standards with an AQL of 0.1 for critical defects, ensuring the highest level of quality control. Full traceable reporting must be maintained throughout the process, documenting every inspection step and result with complete accountability and data integrity. This work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense contracting. The procurement falls under NAICS code 541380, indicating technical and scientific consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 13, 2026, leaving a ten-day window for qualified small businesses to submit proposals. Although the place of performance and point of contact details are unspecified, the contract is accessible via the DIBBS portal, and performance expectations center on precision testing and documentation to meet military-grade quality requirements without deviation.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Defense Logistics Agency (DLA) Compliance Packaging and Preservation ProviderThe contract requires a small business to provide full packaging, preservation, and labeling services that meet military standards, specifically MIL-STD compliance, with an emphasis on mercury-free methods for environmental and safety compliance. All work must adhere to Defense Logistics Agency requirements, including the application of barcoding and precise container marking to ensure traceability and logistical efficiency across the supply chain. Services must be performed under a Total Small Business Set-Aside, restricting eligibility exclusively to small businesses certified by the SBA, and is classified under NAICS code 322291, which pertains to other paper product manufacturing. The solicitation is issued by the ASC Commodities Division within the Department of Defense and is open for response until August 13, 2026, with a posting date of August 3, 2026. Performance location details are unspecified, but all work must satisfy federal defense logistics standards without exception.
Sanitary Paper Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334511
New
DIBBS
Qualified Product/Manufacturer Sourcing AgentThe contract seeks a qualified small business to source defense-compliant electronic components in accordance with MIL-DTL-24779D specifications and H02 clause requirements, ensuring all products originate exclusively from manufacturers or suppliers listed on the Qualified Products List or Qualified Manufacturers List. The role involves identifying, vetting, and procuring components that meet stringent military standards, with the expectation that all sourcing activities adhere to the technical and compliance frameworks established by the Department of Defense. The effort is classified as a total small business set-aside under FAR 19.5, restricting eligibility exclusively to small businesses as defined by the SBA, with the NAICS code 334511 indicating the industry focus on electronic component manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires full responsiveness to the referenced specifications and compliance with all associated military standards. Responses are due by August 13, 2026, and the contract will be executed as a subcontract. While no point of contact or physical performance location is provided, the work is expected to support defense electronics supply chains through rigorous supplier qualification and component sourcing processes. All activities must ensure traceability, authenticity, and regulatory alignment with current DoD procurement guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SHROUD
Solicitation # SPE4A6-26-T-11MB
The contract specifies the procurement of 817 units of BUSHING, SHROUD with NSN 3120-01-131-0493 under solicitation SPE4A6-26-T-11MB, with a delivery requirement of 130 days ADO. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the appropriate revision determined by the acquisition type and relevant dates. The item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and configuration change management must follow engineering change proposal and variance procedures. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical data associated with the item is controlled under ITAR or EAR, prohibiting export without prior authorization from the Department of State or Commerce, including disclosures to foreign persons regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this data. Packaging must comply with DLA standards, and covered defense information protocols apply. The place of performance is Jacksonville, Florida, with Tracy Fletcher as the primary point of contact.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details