Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on February 11, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

INTEGRATED SOLID WASTE MANAGEMENT (ISWM) SERVICES AT NAVAL CONSTRUCTION BATTALION CENTER (NCBC) GULFPORT, MISSISSIPPI AND OUTLYING AREAS WITHIN NCBC GULFPORT AREA OF RESPONSIBILITY (AOR)

Closed
69450Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562111
New
Federal
Site Visit - Removal of Old Fluid Cell
Solicitation # 82247
The Maintenance Support Group at Robins Air Force Base, Georgia, requires a contractor to provide all labor, equipment, materials, and transportation to decommission, remove, and dispose of one Quintus ABB QFC 1.6 x 4-1400 fluid cell press located in building 140. The scope of work includes dismantling and rigging heavy components, such as a 148,000 lb unwound main cylinder and an 86,000 lb lower filler piece, relocating them to a designated on-base cutting site, reducing the materials to recyclable sizes, and hauling all scrap and debris off-base. The contractor is also responsible for restoring the work area and any cutting sites to their original pre-project conditions, ensuring they are free of industrial waste and grease. A critical requirement is the submission of a Draft Technical Removal Plan within 14 calendar days of the award, which must be formally approved by the Contracting Officer before any physical work begins. Operational constraints include a strict floor loading limit of 350 PSI on concrete floors and the requirement to secure daily DAF Form 592 hot work permits for any on-base cutting activities. Additionally, the contractor must maintain operational fire extinguishers at all cutting sites. This sources-sought opportunity, solicitation number 82247, includes a site visit scheduled for December 14, 2026, requiring visitors to provide identification and vehicle documentation at the Robins AFB Visitor's Center.
FA8571 Maintenance Contracting Afsc Pzim

POSTED

about 4 hours ago

DEADLINE

in about 2 months
NAICS: 562111
New
MI 2026-09 Waste Removal Collection Services
Solicitation # MI2026-09
Adams and Associates, Inc., operating on behalf of the U.S. Department of Labor, is soliciting bids for weekly waste removal and recycling collection services at the Miami Job Corps Center in Florida. The contract period runs from November 1, 2026, to October 31, 2027. The scope of work requires the provision and servicing of one 6-yard solid waste container twice weekly, two 8-yard solid waste containers twice weekly, one 8-yard recycling container twice weekly, and one 4-yard recycling bin once weekly. As a federally funded facility, the center is entitled to GSA pricing, and the agreement is subject to Service Contract Act regulations under Wage Determination No. 2015-4543. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and possess all necessary business and employee licenses for the State of Florida. Required insurance includes Workers Compensation, Automobile Liability, and Comprehensive General Liability of at least $1,000,000 per occurrence. Bids must be submitted on company letterhead by October 23, 2026, and include a detailed cost breakdown, W9, Vendor Questionnaire, and Authority to Commit. Award selection will be based on the most responsible bid rather than the lowest cost. Additionally, contractor personnel must adhere to strict center security protocols, including mandatory searches and a prohibition on fraternization with students and staff.
Miami Job Corps Center

POSTED

about 10 hours ago

DEADLINE

in 2 days

General Info

NAICS

562111 - Solid Waste Collection

Place of Performance

Gulfport, MS, 39501, USA

Set-Aside

SBA

Documents

4

N6945022Q0002_Amendment_0001.pdf

PDF

N6945022Q0002_GPI_Responses_0001.pdf

PDF

N6945022Q0002_SectionC_PWS_0001.pdf

PDF

N6945022Q0002_SectionJ_Technical+Attachments_0001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseClosed
Posted

Sources Sought

Notice updated

Response deadline changed from Jul 30, 2020 to Aug 10, 2020. The notice title changed.

Type Changed

Sources Sought → Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navfacsyscom Southeast
Contacts2 people available
OfficeNAS JACKSONVILLE, FL, 32212-0030, USA
Office AddressNAS JACKSONVILLE, FL, 32212-0030, USA

Full Description

Show more
INTEGRATED SOLID WASTE MANAGEMENT (ISWM) SERVICES Integrated Solid Waste Management (ISWM) services at Naval Construction Battalion Center (NCBC) Gulfport, Mississippi and outlying areas within NCBC Gulfport area AOR. This acquisition will provide facility support services for the 1503030 Integrated Solid Waste Management Sub-Annex. See attached Request for Quote (RFQ) N6945022Q0002 and associated attachments. Amendment 0001 - Issued on 02/11/2022 to extend the due date and time for the RFQ from 2:00PM EST16 February 2022 to 2:00PM EST 22 February 2022. See N6945022Q0002_0001 The Performance Work Statement (PWS) has been updated. A summary of changes is provided below and the revised PWS will be attached via file name: N6945022Q0002_Section C_PWS_0001 Technical Attachments has been updated and a summary of changes is provided below. The revised technical of Section J will be attached via file name N6945022Q0002_SectionJ_Technical Attachment_0001.

More opportunities from Department Of Defense → Navfacsyscom Southeast

Same awarding agency

NAICS: 332321
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - Accurate Lock & Hardware
Solicitation # N6945027SP7777-Accurate
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources of supply capable of providing a ligature-resistant sliding door system that meets or exceeds the performance of the LR-SDS / SL-LR-SDS manufactured by Accurate Lock and Hardware. This system is specifically required for behavioral health environments to eliminate ligature opportunities and prevent patient barricading through the use of concealed overhead tracks, locking hardware, and operating trim. Technical requirements include a 150 ft-lb impact test rating per ANSI A250.13-2014, dual ball-bearing carrier assemblies with a 1,240 lbs dynamic load capacity, and compliance with ANSI/UL 1784 air leakage testing where applicable. This notice is for market research purposes only and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data, including a completed Attachment 1, to the designated points of contact by October 30, 2026, at 3:00 PM ET. Submissions are limited to five one-sided pages and must demonstrate compatibility with the existing system requirements.
Metal Window and Door Manufacturing

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 561621
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Access Control Equipment panel
Solicitation # N6945027SP7777-AMAG-ACCESS
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources of supply that can provide access control equipment panels with performance equal to specific AMAG Technology models, including the M2150-2DBC, M2150-4DBC, M2150-DBU/MKII, and M2150-8DBC/MKII. The required equipment must fully integrate with the existing AMAG Symmetry Enterprise system, including all software, hardware, databases, and licensing. Technical specifications require the panels to connect via LAN, control up to 16 doors, manage at least 20,000 card holders, support smart card and proximity readers with Wiegand support, and maintain UL 294 and UL 1076 listings with a 100 Mbps network connection. This is a sources-sought notice for market research purposes and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data and a completed company information form, including their CAGE code, SAM registration status, NAICS code, and bonding capacity. Submissions are limited to five one-sided pages and must be emailed to the designated points of contact, Jeff Rhein and Reuben Amarh, by October 30, 2026, at 3:00 PM ET. The government will evaluate the submissions to determine if alternative products can meet the operational requirements of the existing video surveillance and access control infrastructure.
Security Systems Services (except Locksmiths)

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 334512
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - Metasys
Solicitation # N69450SP7777-Metasys
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking to identify potential sources capable of providing a building automation control system with performance equal to the Johnson Controls Metasys system. Key technical requirements include scalability for seamless connection of field controllers to supervisory servers, open integration supporting industry standards like BACnet, encrypted communications with multi-factor authentication, and a centralized interface dashboard for security risk management. Crucially, the system must provide seamless connectivity to the existing Metasys system currently serving the main hospital in Building 2080. This is a sources-sought notice for market research purposes and does not constitute a request for proposals or a binding contract. Interested respondents must submit detailed technical data, a completed company information attachment including CAGE and NAICS codes, and bonding capacity details to the designated points of contact by October 30, 2026, at 3:00 PM ET. Submissions are limited to five one-sided pages and must exclude company brochures. The government is evaluating a wide range of business sizes, including various small business categories and large businesses, to determine if alternative products can meet these specific operational and integration requirements.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 561621
New
Federal
P7777 ACC SARP Replacement NAS Jacksonville, Florida - AMAG Symmetry Enterprise video surveillance system
Solicitation # N6945027SP7777-AMAG
The Naval Facilities Engineering Systems Command, Southeast is conducting a market survey for the Fiscal Year 2027 P7777 ACC SARP Replacement project at NAS Jacksonville, Florida. The government is seeking potential sources capable of providing a Network Video Recorder and PoE video surveillance cameras, including both indoor/outdoor dome and multisensor models, that offer equal performance to AMAG Technology and AXIS Communications products. A critical requirement is that all hardware and software must fully integrate with the existing AMAG Symmetry Enterprise video surveillance system, including all monitoring stations and licensing. The required Network Video Recorder must feature a Xeon E-2488 Processor, 64 GB of RAM, Windows Server 2019 Standard Embedded OS, and a minimum 5 year warranty. Dome cameras must provide 2 MP color images with IK10 vandal rating and FIPS 140-3 Level 3 security features, while multisensor cameras require 13 MP color images with seamless stitching and FIPS 140-2 Level 2 security. This is a sources-sought notice for market research purposes and not a request for proposals. Interested parties must submit detailed technical data and a completed company information form, including SAM registration and bonding capacity details, to the designated points of contact by October 30, 2026, at 3:00 PM ET.
Security Systems Services (except Locksmiths)

POSTED

4 days ago

DEADLINE

in 10 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS