Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Intent to Sole Source

Active

1176395Federal

Response Deadline09/04/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Agriculture, specifically the Csa East 6 Usda-Fs office, has issued an intent to sole source for the procurement of replacement barrels for the agency's standard-issue FN rifle platform. This acquisition is intended to ensure that law enforcement personnel have properly functioning duty rifles by utilizing manufacturer-matched FN components, which are required for compatibility, safety, and compliance with agency armorer specifications. The procurement does not involve the replacement or modification of the rifles' serialized components. Solicitation number 1176395 was posted on August 28, 2026, with a response deadline of September 4, 2026. The contract falls under NAICS code 332994 and is not subject to any set-aside restrictions. The place of performance is located in Brunswick, Georgia, and the primary point of contact for this action is Mikaela Laney.

General Info

USDA sole source procurement for replacement FN rifle barrels in Brunswick, Georgia.

Agency

Department Of Agriculture → Csa East 6 Usda-FsView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

Brunswick, GA, 31524, USA

Set-Aside

NONE

Documents

(1)

NOTICE+OF+INTENT+TO+AWARD+A+SOLE+SOURCE.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PostedAug 28

special-notice

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 12:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → Csa East 6 Usda-Fs

Contacts1 person available

OfficeAtlanta, GA, 303092449, USA

Organization / Agency

Department Of Agriculture → Csa East 6 Usda-Fs

View Agency Profile

Office AddressAtlanta, GA, 303092449, USA

Contacts

Mikaela Laney

contact@example.gov

Full Description

Show more

This procurement supports the agency's standard-issue FN rifle platform. LEI sworn personnel carry approved and properly functioning duty rifles while performing official duties. This acquistion does not invovle replacing or modifying the rifle's serialized (the legal firearm). LEI rifles currently in service utilitze FN-manufactured lower recievers; therefore, replacement barrels must be manufactorer-matched FN compnents to ensure proper fit, compatibility, safety and compliance with agency armorer and platform specifications.

Similar Contracts

Same NAICS industry code

HOUSING, FEEDER-DELI

Solicitation # SPE7L7-26-T-4799

This contract, identified as SPE7L7-26-T-4799, is for the procurement of two units of Housing, Feeder-Deli (NSN 1005014776396) for the Department of Defense. The order is managed by the DDSP New Cumberland Facility with a required delivery date of February 3, 2027. The contract specifies a delivery timeframe of 168 days and requires shipping FOB Origin to the New Cumberland, Pennsylvania facility. The agreement includes strict technical and quality mandates, including demilitarization requirements for small arms weapons and parts, as well as CMMC Level 2 self-assessment for cybersecurity. Packaging must adhere to ASTM D3951 and MIL-STD-129, and the contractor must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware. Surplus items are explicitly deemed unacceptable for this specific national stock number.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

BRACKET, PIVOT, RIGHT

Solicitation # SPE4A7-26-T-684L

This contract is for the procurement of five right pivot brackets, identified by NSN 5342-01-143-4378 and part number 00100H16665. The order is issued by the Department of Defense through the ASC Supplier OE and AF Division, with a required delivery date of February 27, 2027, and a delivery timeline of 169 days after the order. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment and specific packaging standards under MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Quality assurance will be managed via sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE7M1-26-U-5123

Solicitation SPE7M1-26-U-5123 is a total small business set-aside issued by DLA Land and Maritime for the procurement of 80 estimated units of a Resilient Weapon System Mount (NSN 5342013323584). This indefinite-quantity contract, with a maximum value of 350,000 dollars, includes a guaranteed minimum quantity of 8 units. The items are identified as Type I Code S with a non-extendable shelf life of 60 months. Delivery is required within 41 days after order, with offers submitted based on FOB Origin under the First Destination Transportation program. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system. The procurement is governed by various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific requirements for hazardous material labeling and safeguarding covered defense information.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

ANODE, CORROSION PRE

Solicitation # SPE4A7-26-T-684S

DLA Aviation is soliciting quotes for the procurement of three corrosion prevention anodes under NSN 5342014988278. This combined solicitation, numbered SPE4A726T684S, is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332994. The items are to be delivered to DLA Distribution within 169 days after the order is placed. Approved sources include specific parts from 6Y128 and 96169. All responsible sources may submit electronic quotes by the deadline of August 28, 2026. The solicitation is available exclusively online via the provided link, as hard copies and separate technical drawings are not available.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-672P

This contract is for the procurement of 146 units of a resilient weapon system mount, identified by NSN 5342-00-078-5593. The item is classified as a commercial critical application item with a non-extendable shelf life of 60 months. The procurement is managed by the Department of Defense under solicitation number SPE4A7-26-T-672P, with the primary delivery destination being the DLA Distribution Depot at Tinker AFB, Oklahoma. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, marking, and documentation standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted via sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Delivery is required within 28 days after receipt of the order, with a required delivery date of February 24, 2027.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

ANODE, CORROSION PREVEN

Solicitation # SPE4A7-26-T-684V

DLA Aviation is soliciting quotes for the procurement of 10 corrosion prevention anodes under NSN 5342014988282. This request for quote, identified by solicitation number SPE4A726T684V, requires delivery to DLA Distribution within 169 days after the order is placed. Approved sources for this item include specific parts from 6Y128 and 96169. All responsible sources are invited to submit electronic quotes by the deadline of August 28, 2026. The solicitation is available exclusively online, and no hard copies, specifications, plans, or drawings are provided. Inquiries should be directed to the buyer via the DIBBS portal or the provided contact email.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

LATCH, AMMUNITION COMPA

Solicitation # SPE4A7-26-T-673Y

This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Div, is for the procurement of 26 ammunition compartment latches under NSN 5342-01-224-7788. The contract requires delivery within 171 days after receipt of order and is categorized under NAICS code 332994. Performance is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and inspection and acceptance at origin. Notably, the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-6303

Solicitation SPE7M2-26-T-6303, issued by the Department of Defense Nuclear Reactor Program, is for the procurement of 16 units of a specific clip, identified by NSN 5342-01-118-8758 and part number 12384B18 from Curtiss-Wright Electro-Mechanical. The contract is valued at 256.00 dollars, with a delivery timeframe of 168 days. Delivery is set as FOB Origin, with the destination and point of inspection and acceptance located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and safety standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking and labeling. Packaging must comply with MIL-STD-2073-1E and RP001. A critical requirement is the prohibition of mercury or mercury-containing compounds in the hardware and packaging, with limited exceptions for specific functional components. Additionally, the contractor must comply with NIST SP 800-171 for safeguarding covered defense information and report cyber incidents via the Supplier Performance Risk System. Invoicing must be processed electronically through the Wide Area WorkFlow system.

NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

Evike Airsoft Rifles

Solicitation # W912LP26Q3008

The Department of Defense, specifically the W7M8 Uspfo Activity Ia Arng, is seeking proposals for the procurement of Evike Airsoft Rifles under solicitation number W912LP26Q3008. This combined contract opportunity is categorized under NAICS code 332994 and is open to all qualified bidders as there is no specific set-aside designated for this requirement. The solicitation was posted on August 25, 2026, with a response deadline of August 28, 2026, at 5:00 PM. The place of performance is located in Johnston, Iowa. Primary coordination for this effort is managed by Kelsey Letcher, with Kelly Burk serving as the secondary point of contact.

W7M8 Uspfo Activity Ia Arng

POSTED

about 22 hours ago

DEADLINE

10--HOUSING,MACHINE GUN

Solicitation # SPE7L1-26-U-0644

This contract is for the procurement of two machine gun housings, identified by NSN 1005-01-552-3907 and part number DMG0900A from Dillon Aero, Inc. The item is designated as a critical application item and a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring the manufacturer or exporter to be registered with the Directorate of Defense Trade Controls. Delivery is required within 139 days from the order date, with shipping handled FOB Origin and inspection and acceptance occurring at the destination. The agreement includes several strict technical and quality requirements, including CMMC Level 2 self-assessment, supply chain traceability documentation, and specific demilitarization standards for small arms parts. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Additionally, the contract specifies that surplus items are not acceptable and requires the removal of government identification from any non-accepted supplies.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

SWIVEL, QUICK RELEAS NSN 1005-01-529-9309

Solicitation # CL25346010

The Department of Defense, through DLA Land And Maritime, is conducting market research to identify potential manufacturers for a Quick Release Swivel under NSN 1005-01-529-9309. This is a sources-sought notice rather than a formal Request for Proposal, intended to find capable vendors interested in a future long-term contract solicitation. Currently, Grovtec US Inc is listed as an approved source with part number 11822202-GOV. Interested parties must complete a Market Research Questionnaire and submit it to Contract Specialist Major Joseph Jones by September 4, 2026. Technical drawings for the item are available via TDMT using reference number MR015299309. The requirement falls under NAICS code 332994 and is managed by the office located in Columbus, Ohio, with the place of performance situated in New Cumberland, Pennsylvania.

DLA Land And Maritime

POSTED

about 22 hours ago

DEADLINE

GUN CONTROL UNIT,EF

Solicitation # SPRMM126QGF19

This solicitation is for the manufacture and supply of the Gun Control Unit, EF, under the authority of DLA Mechanicsburg. The contract requires strict adherence to quality assurance standards, including physical identification per MIL-STD-130 and packaging according to MIL-STD 2073. All invoices and receiving reports must be submitted electronically through the PIEE-WAWF system. Key requirements include a 60-day quote validity and the mandatory disclosure of the Original Equipment Manufacturer and CAGE code if the offeror is a distributor. Any changes to production facilities require written approval from the Contracting Officer and a price reduction of 250 dollars to cover administrative costs. The government reserves the right to perform inspections at the source to ensure all supplies conform to the specified design and technical requirements.

SPRMM1 DLA Mechanicsburg

POSTED

about 22 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Agriculture → Csa East 6 Usda-Fs

Same awarding agency

Trimble GPS Survey Equipment Purchase

Solicitation # 12444526Q0068

The Department of Agriculture, specifically the Csa East 6 Usda-Fs, is requesting quotations for the purchase of Trimble GPS survey equipment to support the Ottawa National Forest. This acquisition is being conducted as a combined synopsis and solicitation for commercial items under FAR Part 12, meaning no separate written solicitation will be issued. The project is categorized under NAICS code 334519 and is designated as a total set-aside for small business concerns with a size standard of 600 employees. Interested responsible sources must submit their proposals by the deadline of August 31, 2026. The solicitation, numbered 12444526Q0068, was posted on August 13, 2026. Primary coordination for this requirement is handled by Joshua Franks, and the place of performance is located in Atlanta, Georgia.

Other Measuring and Controlling Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

UV-LED Chamber Supply and Integration

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Intent to Sole Source: Opsytec Dr. Gröbel GmbH UV Equipment and Calibration Services

Solicitation # 1174144

The USDA Agricultural Research Service intends to award a sole-source, firm-fixed-price contract to Opsytec Dr. Grobel GmbH for the procurement of a BSL-01i ECO+ UV-LED Irradiation Chamber. This specialized equipment, which includes a UV-MAT touch controller and an RMD sensor, will be used at the Eastern Regional Research Center in Wyndmoor, Pennsylvania, to study the inactivation effects of 405 nm blue light on foodborne pathogens. The system must meet strict technical requirements, including a variable irradiance range of 0 to 800 mW/cm2, thermal tracking between 10 and 40 degrees Celsius, and a compact benchtop footprint of 40 x 30 x 50 cm. The government has determined that Opsytec Dr. Grobel GmbH is the only source capable of meeting these specific technical and spatial requirements based on market research conducted between January and March 2026. While this is an intent to sole source, the government is accepting technical capability statements from other interested parties until September 2, 2026, to determine if a competitive acquisition strategy is feasible. All inquiries and submissions should be directed to Contract Specialist Michael J. Wheelock.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Bi- Yearly Roof Inspections

Solicitation # 12444526Q0073

Solicitation 12444526Q0073 is a total small business set-aside under NAICS 238160 for a firm-fixed price requirements contract to provide bi-annual roof inspection services at the Forest Products Laboratory in Madison, Wisconsin. The scope includes inspecting the exterior condition of roofing systems, flashing, sheet metal, wall panels, and parapets for buildings 1, 4, 15, 29, 33, 34, 46, and 50. Key deliverables consist of two yearly inspections and accompanying electronic PDF reports detailing roof age, system types, deficiencies, and estimated remaining service life. Inspectors must hold IIBEC Registered Roof Observers certification or an equivalent qualification. The contract includes a potential five-year term with option to extend. A mandatory site visit is scheduled for September 1, 2026, at 10:00 AM CST; failure to attend will result in the rejection of the offer. Bids are due by September 9, 2026, at 2:00 PM EST to Mikaela Laney. Award will be based on best value, prioritizing the highest technically rated offeror provided the price is fair and reasonable, past performance is acceptable or neutral, the site visit was attended, and the offeror passes a background check. Payment is structured as 50% of the yearly contract value per inspection and report. Contractors must also provide a Certificate of Conformance per FAR 52.246-15 and comply with specific USDA anti-discrimination and DEI regulations.

Roofing Contractors

POSTED

DEADLINE

Certificate of Conformance (COC) Preparation and SubmissionThis subcontract opportunity with the Department of Agriculture, specifically Csa East 6 Usda-Fs, requires the preparation and submission of Certificates of Conformance for each inspection deliverable. The contractor must ensure all documentation adheres to FAR 52.246-15 standards, maintaining strict traceability to manufacturers and compliance with federal documentation requirements. The project is designated as a total Small Business Set Aside under NAICS code 541380. Performance will take place in Madison, with a response deadline of September 9, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Bi-Annual Roof Inspections and Condition ReportingThis subcontract opportunity with the Department of Agriculture involves performing bi-annual roof inspections at the Forest Products Laboratory located in Madison, Wisconsin. The selected contractor will be responsible for conducting twice-yearly assessments to provide detailed reporting on the overall roof condition, identifying specific deficiencies, offering maintenance recommendations, and estimating the remaining service life of the roofing systems. The project is designated as a total Small Business Set Aside under NAICS code 541330. Interested parties must submit their responses by September 9, 2026, following the posting date of August 26, 2026. The contract is managed by Csa East 6 Usda-Fs.

Engineering Services

POSTED

DEADLINE

Replacement Parts and Maintenance SupplierThe Department of Agriculture, specifically Csa East 6 Usda-Fs, is seeking a subcontractor for the supply of replacement parts and maintenance components for an imager system. The scope of work involves providing OEM or compatible replacement parts, including cooled CCD sensors, light tables, filters, and UV lamps, to ensure the ongoing maintenance and operational efficiency of the equipment. This subcontract opportunity is categorized under NAICS code 423490 and will be performed in Ames, Iowa. Interested parties must submit their responses by the deadline of September 1, 2026.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Scientific Equipment Installation and Calibration ServicesThis subcontract for Scientific Equipment Installation and Calibration Services involves the on-site installation of a digital imager at the USDA NADC in Ames, Iowa. The scope of work includes critical safety verification, the setup of automatic focusing, and the verification of safety interlocks to ensure operational security and precision. Additionally, the contract requires the provision of user training to ensure proper equipment operation. The opportunity was posted on August 26, 2026, with a response deadline of September 1, 2026, under NAICS code 811212 for the Department of Agriculture.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Image Analysis Software Development and SupportThis subcontract opportunity with the Department of Agriculture, specifically Csa East 6 Usda-Fs, involves the development and support of offline image analysis software. The required software must be capable of performing molecular weight analysis, densitometry, automated band detection, background subtraction, and multiplex analysis, while also supporting data export via USB. The project is categorized under NAICS code 511210 and will be performed in Ames, Iowa. Interested parties must submit their responses by September 1, 2026, following the posting date of August 26, 2026.

Software Publishers

POSTED

DEADLINE

Scientific Imaging System Supply and IntegrationThis subcontract through the Department of Agriculture, specifically Csa East 6 Usda-Fs, involves the supply and integration of a comprehensive scientific imaging system. The required equipment consists of a fully integrated digital imager featuring chemiluminescence detection, UV transillumination, and RGB LED imaging, supported by molecular analysis software, a touchscreen computer, and a white light table. The project is categorized under NAICS code 334516 and will be performed in Ames, ZIP code 50010. Interested parties must adhere to the response deadline of September 1, 2026, following the posting date of August 26, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Brushing and Mowing of EZ roads

Solicitation # 12444526Q0067

Solicitation number 12444526Q0067 is a request for quotations for roadside vegetation removal, specifically brushing and mowing, within the East Zone of the Superior National Forest. This procurement is being managed by the Department of Agriculture under the Csa East 6 Usda-Fs office. The work is to be performed in Grand Marais, Minnesota. This acquisition is a total small business set-aside under NAICS code 561730, which carries a size standard of 9.5 million dollars. Interested responsible sources must submit their quotations by the deadline of September 7, 2026. Primary inquiries regarding this solicitation should be directed to Joshua Franks.

Landscaping Services

POSTED

DEADLINE

Notice of Intent to Sole Source: Beckman Coulter Optima XPN 90 Ultracentrifuge System Replacement

Solicitation # 1174091

The United States Department of Agriculture Forest Service intends to award a sole-source, firm-fixed-price contract to Government Scientific Source, Inc. for the procurement of one Beckman Coulter Optima XPN 90 Ultracentrifuge System. This acquisition includes installation services and basic operator training to replace an obsolete 30-year-old system used by the USDA-ARS wheat virology research group. The procurement is conducted under FAR 13.106-1(b)(1) as it falls below the Simplified Acquisition Threshold. The technical justification for this sole-source selection is based on the need for total mechanical and dimensional compatibility with the laboratory's existing inventory of high-value proprietary Beckman rotors. Utilizing this specific platform avoids redundant capital costs and ensures seamless integration into current testing protocols. While this is not a request for competitive proposals, interested parties capable of meeting the proprietary rotor compatibility requirements may submit capability statements to the designated points of contact before the deadline.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE