Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Intent to Sole Source: Slocumb Gate Actuator

Active
F3T3CE6078AW01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The 4th Contracting Squadron at Seymour Johnson Air Force Base in North Carolina plans to award a sole-source, firm-fixed-price purchase order to Delta Scientific Corporation for the procurement of a specific actuator model, MPAI-A4300RM34A operating at 230 volts, essential for the HD300EM barrier system located at Slocumb Gate. This actuator requires precise calibration that is proprietary to Delta Scientific Corporation due to the unique configuration of the barrier system originally awarded to them, leaving no other qualified sources capable of properly calibrating or servicing the unit to ensure correct deployment and retraction. The requirement is justified under R-DFARS 206.103-170, which permits sole-source procurement when only one responsible source can meet the agency’s needs. The contract is issued under solicitation number F3T3CE6078AW01, with a posted date of August 10, 2026, and a response deadline of August 19, 2026. Performance will occur at Goldsboro, North Carolina, within the same installation as the barrier system. The contracting office is part of the Department of Defense, and inquiries should be directed to SSgt Ashley Goodwin or Ryan Rhea. No set-asides are applied to this action, and the NAICS code 333995 identifies the industry as other commercial and industrial machinery and equipment manufacturing.

General Info

Sole-source order to Delta Scientific for MPAI-A4300RM34A actuator to service HD300EM barrier at Slocumb Gate.

Agency

Department Of Defense → FA4809 4TH Cons Squadron CcView Agency

NAICS

333995 - Fluid Power Cylinder and Actuator ManufacturingView NAICS

Place of Performance

Goldsboro, NC, 27531, USA

Set-Aside

NONE

Documents

(1)

Delta Scientific Corp. Intent to Sole Source for Slocumb Gate Actuator

DOCX•sources-sought

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4809 4TH Cons Squadron Cc
Contacts2 people available
OfficeSEYMOUR JOHNSON AFB, NC, 27531-2456, USA
Organization / Agency
Department Of Defense → FA4809 4TH Cons Squadron Cc
View Agency Profile
Office AddressSEYMOUR JOHNSON AFB, NC, 27531-2456, USA
Contacts
SSgt Ashley Goodwin
contact@example.gov
+1 (555) 000-0000
Ryan Rhea
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

The 4th Contracting Squadron (4 CONS) at Seymour Johnson AFB, NC, intends to award a sole-source, firm-fixed-price purchase order to Delta Scientific Corporation(40355 Delta LN, Palmdale California, 93551) to provide a critical part to the HD300EM Barrier system at Seymour Johnson AFB. Actuator Model Number MPAI-A4300RM34A, 230 VOLT  must be calibrated correctly for barrier system HD300EM which is used for Slocumb Gate. The unique and specific configuration required is proprietary only to Delta Scientific Corporation. There are no other sources that can calibrate the actuator to correctly deploy, and retract. This is due to the fact that Slocumb Gate barrier system was awarded to Delta Scientific Corporation. This contract action is being conducted under the authority of R-DFARS 206.103-170, Only one responsible source and no other supplies or services will satisfy agency requirements.

Similar Contracts

Same NAICS industry code

NAICS: 333995
New
Federal
32-Channel Load Control System with Controlled Load Abort Capability
Solicitation # 80AFRC26SS020
NASA Armstrong Flight Research Center is seeking a 32-channel closed-loop servo-hydraulic load control system integrated with a Controlled Load Abort System to support structural ground testing of aerospace components and full-scale assemblies. The system is required for the Flight Loads Laboratory to ensure precise control and safety during complex load tests. Due to the need for software compatibility with legacy platforms and the urgency of high-priority projects, the government intends to issue a sole source contract to Moog Inc. under FAR Part 12. Interested organizations may submit their capabilities and qualifications to the designated points of contact by August 24, 2026, at 12:00pm PT. These submissions will be used to determine if the acquisition will remain a sole source or be opened for competition. The procurement is managed by the NASA Armstrong Flight Research Center in Edwards, California, under solicitation number 80AFRC26SS020.
NASA Armstrong Flight Research Cntr

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333995
New
DIBBS
Supply of Rod & Piston Actuator (NSN 2915-01-218-7655)The contract seeks the supply of 266 units of Rod & Piston Actuator identified by NSN 2915-01-218-7655, which are classified as Critical Safety Items and must fully comply with designated technical specifications. The items may be new, unused, reconditioned, or altered, provided they maintain complete traceability and meet all regulatory and quality requirements. This procurement is part of a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER OEM DIVISION, with the NAICS code 333995 indicating specialization in other miscellaneous manufacturing. The solicitation was posted on August 10, 2026, with responses required by September 10, 2026, and performance is expected to align with Defense Logistics Agency standards. All deliverables must support critical operational systems and require rigorous documentation to ensure integrity and safety throughout the supply chain.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 333995
New
DIBBS
ROD AND PISTON, ACTU
Solicitation # SPE4A5-26-R-0270
The contract pertains to the procurement of 266 Rod & Piston, ACTU units with NSN 2915-012187655 and part number 2665806, classified as a Critical Safety item requiring a higher-level quality system. Delivery is mandated 167 days after receipt of order to a designated location, with FOB at origin and inspection and acceptance occurring at the destination. The solicitation is issued under an unrestricted solicitation using other than full and open competition and is anticipated to be awarded against the OEM’s Basic Ordering Agreement, with the RFP scheduled for release on or about August 12, 2026, and responses due by September 12, 2026. Offers exceeding $900,000 require a subcontracting plan, while those over $10,000,000 must include certified cost and pricing data in addition to a subcontracting plan. All offerors must be registered in the System for Award Management (SAM) to be eligible for award. Alternate offerors must submit a Source Approval Request package along with a completed solicitation copy to be considered; failure to submit sufficient documentation in time will result in exclusion from this procurement, though approval may qualify them for future opportunities. Award decisions will be based on price, past performance, and other factors assessed through the Supplier Performance Risk System. The procuring activity is DLA Aviation, with primary point of contact Jason Balsiger, and performance will occur in Richmond, Virginia.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 333995
New
Federal
Purchase of Gate Valve Actuators for Crooked Creek Lake
Solicitation # W911WN26QA056
The U.S. Army Corps of Engineers, through the Office of W072 Endist Pittsburgh, is soliciting proposals for the purchase of gate valve actuators for Crooked Creek Lake under solicitation number W911WN26QA056. Vendors must complete the required solicitation form and submit their responses by August 13, 2026, at 2:00 PM Eastern Time. All inquiries must be directed to Isaiah Johnson at isaiah.m.johnson@usace.army.mil, and any responses to questions will be issued formally as solicitation amendments to ensure transparency and equal access to information for all participants. The NAICS code 333995 applies to this procurement, indicating it is for other commercial and industrial machinery and equipment. Supporting documentation including current actuator photographs is available in Attachments 1a and 1b to assist vendors in understanding the existing infrastructure. The contract award will be made to a vendor capable of delivering qualified actuators to support the critical infrastructure at Crooked Creek Lake.
W072 Endist Pittsburgh

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333995
New
DIBBS
HEAD, LINEAR ACTUATI
Solicitation # SPE4A7-26-R-0689
The solicitation seeks a Head, Linear Actuating Cylinder under NSN 1650-01-089-0444 through a sealed bid process as a Firm Fixed Price Indefinite Quantity Contract with a five-year base period and no options, issued by the Defense Logistics Agency Aviation under solicitation number SPE4A7-26-R-0689. The contract is set aside entirely for small businesses, with an estimated annual requirement of 440 units and a guaranteed minimum of 110 units per year, requiring delivery within 609 days after date of award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and only contractors with approved DLA JCP certification, completed training, and authorized access may handle such data. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including specific codes for preservation method, container types, and a required marking instruction to "Do Not Post to Stock" alongside standard markings. Interior packaging must include hard copies of the contract, material certifications, manufacturing drawings, and return shipping information as mandated by DFARS Appendix F. Inspection and acceptance occur at the source, with quality compliance requiring ISO 9001:2015 certification, calibration of test equipment to ISO 10012:2003 or ANSI/NCSL 2540.3, and sampling per MIL-STD-1916 or comparable zero-based plans. The contractor must warrant parts are valid for one year after receipt on each delivery order. Payment processing is conducted electronically via WAWF, with invoicing dependent on contract type—cost vouchers for cost-type items and invoice-receiving report pairs for fixed-price line items. Offerors must submit proposals via the mandatory Bulk Offer Entry Tool using an approved AMPS account, accompanied by a signed SF1449, with submissions due by 11:59 PM local time on September 7, 2026, and must have completed accurate, current SAM representations within the past year. Award will be based on best value, with past performance weighted significantly more heavily than other non-price factors, and price considered approximately equal in importance to all other factors combined. Progress payments for small businesses are set at 95 percent, and contractors are prohibited from
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 333995
New
Federal
EDrive for Variable Restraint Assembly
Solicitation # FA857126Q0105
The U.S. Air Force is soliciting a sole-source quote from B&D Industrial under Simplified Acquisition Procedures to supply all necessary tools, parts, materials, and equipment required to produce an EDrive actuator for the Variable Restraint Assembly. This requirement supports the Commodities Maintenance Group at Robins Air Force Base in Georgia and is being conducted as a non-set-aside procurement. The solicitation, identified by number FA857126Q0105, was posted on August 7, 2026, with responses due by August 14, 2026, at 4:00 p.m. EDT. The effort falls under NAICS code 333995, categorized as other general purpose machinery manufacturing, and is managed by the Maintenance Contracting office under the Department of Defense. All work must be performed at Warner Robins, Georgia, with Phillip Braswell as the primary point of contact and Andrew Harth as the secondary.
FA8571 Maintenance Contracting Afsc Pzim

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 333995
New
DIBBS
Unspecified Line Item Delivery (CLIN 0003)A subcontract has been issued under the Defense Logistics Agency, part of the Department of Defense, to deliver an unspecified item tied to CLIN 0003, which supports the broader scope of the prime contract. The delivery is categorized under NAICS code 333995, indicating involvement with other industrial machinery manufacturing, likely including components or parts essential to machinery systems. The contract was posted on August 5, 2026, and the place of performance and organizational details remain unspecified, with no set-aside designation applied. The delivery is coordinated through the DIBBS system, with the award linked to contract SPE4A117G0005 and delivery order SPE4A719F7908, though no point of contact or physical location details are provided.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 333995
New
DIBBS
Thermal Actuator Manufacturing and AssemblyThe contract entails the full-scale manufacturing, assembly, and rigorous quality control of two thermal actuators per military specifications, ensuring alignment with stringent defense standards. The scope encompasses every phase of production, from component fabrication to final unit integration, with mandatory adherence to prescribed technical and performance benchmarks. Packaging, labeling, and secure delivery of the completed assemblies are included as integral requirements, guaranteeing readiness for immediate deployment in operational environments. This subcontract falls under the NAICS code 333995 and is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet all federal defense procurement protocols. The contract was posted on August 5, 2026, and is identified by the award number SPE7M126P9059. While specific geographic performance locations and point of contact details are not provided, the work is tied to a formal Defense Logistics Agency initiative, implying classified or sensitive handling requirements. Compliance with military-grade certification, traceability, and documentation standards is implied throughout the scope of work.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

N/A
View Details
NAICS: 333995
New
DIBBS
CYLINDER, INNER SHOC
Solicitation # SPE4A7-26-R-X998
The contract is for the procurement of one cylinder, inner shock absorber, boom stowage, identified by NSN 1680-00-672-8041, under an Indefinite Delivery Contract with a five-year base period and no options. It is structured as a Total Small Business Set-Aside, with the North American Industry Classification System code 333995, and is governed under the Defense Logistics Agency's procurement framework. Delivery is scheduled for 365 days after the issue of an order, with FOB Destination terms applying. The contract incorporates detailed technical and quality requirements from the DLA Master List, which supersede industry standards such as ASTM D3951. Packaging and labeling must strictly adhere to MIL-STD-129, including unit of issue and quantity per unit pack markings, barcoding, and compliance with hazardous materials labeling under 29 CFR 1910.1200, while also following DLA packaging requirements. Inspection and acceptance occur at the origin, conducted by the Government, with zero non-conformances required in sample lots, traceability documentation mandatory, and quality systems adhering to ISO 9001:2015. The item includes technical data subject to export controls under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, and only contractors with approved US/Canada Joint Certification Program status and completed DLA training may access this information. Cybersecurity compliance is mandated through safeguarding covered defense information under DFARS 252.204-7012 and NIST SP 800-171 assessment requirements, with the contractor expected to maintain CMMC Level 2 certification. The Defense Priorities and Allocations System applies, ensuring priority performance, and ocean shipments must use U.S.-flag vessels unless a waiver is obtained. Cost or price is evaluated alongside non-price factors, with past performance—particularly as reflected in SPRS assessments, historical quality, and delivery compliance—weighted as significantly important and approximately equal in importance to cost, indicating a trade-off award methodology rather than lowest price technically acceptable. The contractor must provide completed representations regarding entity identification, small business status, export restrictions, and compliance with anti-trafficking, equal opportunity, and sustainability mandates. Invoice submission is required through WAWF, and all subcontractors must flow down applicable clauses including antiterrorism training, whistleblower protections, and prohibitions on toxic substances such as hex
ASC SUPPLIER OPER AE AND AF DIV

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER, ACTUATING,
Solicitation # SPE7L0-26-Q-0291
The solicitation seeks one actuating cylinder, NSN 3040-01-682-5820, part number 776561 from Parker-Hannifin Corporation, under a firm fixed price contract with a 60-day delivery requirement ADO. The item is governed by technical requirements outlined in the DLA Master List and must comply with specific drawings, quality assurance provisions, and sampling standards including MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances required for acceptance. Critical, major, and minor attributes are assessed at verification levels VII, IV, and II respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. The cylinder contains components subject to Qualified Products List or Qualified Manufacturers List requirements, and phosphate coating suppliers must hold certification as specified under RQ036. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with special marking code ZZ and prescribed packaging methods, and the item is subject to DLA packaging requirements RP001. Technical data associated with the item is controlled under ITAR or EAR, requiring prior authorization for export and compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed export control training, and DLA authorization may access the data. The solicitation mandates electronic invoicing via WAWF, with payment processed through EFT and accelerated payments to small business subcontractors. The contract includes a full suite of FAR and DFARS clauses covering cybersecurity, counterfeit part avoidance, transportation, payment terms, small business growth, employee rights, antiterrorism, and prohibition of certain foreign-sourced materials and services. Offers must be submitted by August 12, 2026, and must include current SAM certifications, including representations regarding inverted domestic corporations, Buy American compliance, and foreign government ownership or control. Quotations must be valid for 90 days, specify pricing basis, identify FOB point, and confirm delivery schedule compliance. Acceptance occurs at destination, and the Government retains all rights to inspect and reject nonconforming supplies. The place of performance includes the DLA W45G18 depot in Texarkana, TX, and contract administration is handled by Jeffrey Bloom at the Columbus, Ohio office.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 333995
New
Federal
Nickajack Lock Hydraulic Cylinder Replacement
Solicitation # W912P526QA030
The contract titled Nickajack Lock Hydraulic Cylinder Replacement is a Small Business Set Aside opportunity under the SBA category, intended exclusively for small businesses. It is managed by the Department of Defense through the W072 Endist Nashville office, located in Nashville, Tennessee, and is classified under NAICS code 333995, which pertains to other commercial and industrial machinery and equipment manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, at 6:00 PM Eastern Time. The work involves replacing hydraulic cylinders at Nickajack Lock, though the exact location of performance is unspecified in the data provided. Primary point of contact for inquiries is Alison Abernathy, reachable at 615-852-9150 or alison.t.abernathy@usace.army.mil, with Jori Jackson as the secondary contact at 615-736-5538 or jori.l.jackson@usace.army.mil. The solicitation is open for bids through the SAM.gov portal, and bidders must ensure compliance with all small business eligibility requirements and submission guidelines by the stated deadline. All proposals must address the technical specifications and performance requirements for the hydraulic cylinder replacement to ensure timely and safe operation of the lock system.
W072 Endist Nashville

POSTED

6 days ago

DEADLINE

in 3 days
View Details
NAICS: 333995
New
International
ACTUATOR, HYDRAULIC-PNEUMATIC, LINEAR
Solicitation # W8482-275493/A
The Department of National Defence is seeking bids for two identical hydraulic-pneumatic linear actuators, part number 700784-064-999, manufactured by DRESSER CANADA INC VALVE AND CONTROLS CANADIAN OPN, with each unit to be delivered to either CFB Halifax, Nova Scotia or CFB Esquimalt, British Columbia, two units per location. All offers must be submitted on a Delivery Duty Paid basis, meaning the supplier is responsible for all costs and risks until delivery at the final destination. Bidders proposing equivalent or substitute products must clearly identify the brand, model, part number, and NCAGE code of the alternative item. Submission requires completion and upload of three mandatory annexes in their original formats: Offeror Submission Details in both Excel and PDF, Offeror Submission Form in PDF, and Offeror Declaration Form in PDF. Proposals must be received by August 20, 2026, at 19:00 UTC, and all documents may be submitted in either English or French. The Crown reserves the right to negotiate with any supplier, and all offerors are bound by the terms and conditions outlined in the solicitation, referenced by its number W8482-275493/A and posted date of August 5, 2026. Additional requirements are detailed in the Statement of Requirements annex, and inquiries should be directed to Contracting Authority Jean-Pierre Normandin at the provided email.
Department of National Defence

POSTED

7 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → FA4809 4TH Cons Squadron Cc

Same awarding agency

NAICS: 541330
New
Federal
Lightning Protection Systems (LPS) - Personnel
Solicitation # FA480926W0079
This presolicitation, numbered FA480926W0079, seeks a contractor to conduct a site survey, data collection, and a detailed Lightning Risk Assessment for aircraft parking ramps at Seymour Johnson Air Force Base in North Carolina. The primary goal is to evaluate the feasibility of a Lightning Protection System specifically designed to protect personnel on the flight line. By reducing or eliminating lightning hazards, the government aims to remove the current requirement for personnel to seek cover when lightning is within a five-mile radius, thereby ensuring uninterrupted critical aircraft maintenance. The project is a total Small Business Set Aside under NAICS code 541330 and is managed by the Department of Defense. Interested parties must respond by August 28, 2026. The performance of the contract will take place in Goldsboro, North Carolina, with the final assessment providing the government with the necessary data to determine if the proposed system can effectively secure a safe working environment for base personnel.
Engineering Services

POSTED

about 7 hours ago

DEADLINE

in 17 days
View Details
NAICS: 333923
New
Federal
FA480926Q0071 - FY26_PKA_Bay Hoist Repair Bldg. 2202 for 4 MUNS
Solicitation # FA480926Q9990
This contract solicitation, designated FA480926Q0071, seeks to repair bay hoists in Building 2202 at Seymour Johnson Air Force Base, North Carolina, to support four Military Utility Narrow Gauge Systems in accordance with the Statement of Work. The work is set aside exclusively for small businesses under the SBA Total Set Aside category, with the NAICS code 333923 indicating specialization in other industrial machinery manufacturing services. The solicitation was posted on July 31, 2026, and responses are due by August 17, 2026, at 5:00 p.m. EST. The contracting office is the 4th Cons Squadron at the Department of Defense, with performance taking place on-site at the base. Primary point of contact is Khadijah Jones, reachable by phone at 919-722-1766 or email khadijah.jones.1@us.af.mil, with secondary support provided by SSgt Ashley Goodwin at 919-722-1757 or ashley.goodwin.2@us.af.mil. All proposals must be submitted through the SAM.gov portal linked in the solicitation.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
Federal
Environmental Site Assessment and Monitoring
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 237310
New
Federal
Paving and Site Asphalt Work
Highway, Street, and Bridge Construction

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 238110
New
Federal
Concrete Formwork and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 238220
New
Federal
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 238210
New
Federal
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: N/A
New
Federal
No subcontract or supplier opportunities available

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 541519
New
Federal
Seymour Johnson AFB Klaxon System Upgrade and Maintenance
Solicitation # FA480926Q0073
This contract solicitation, designated FA480926Q0073, seeks support and services for the Klaxon system upgrade and maintenance at Seymour Johnson Air Force Base in North Carolina. The work is part of a Small Business Set Aside, reserved entirely for small businesses under NAICS code 541519, and is managed by the 4th Cons Squadron CC under the Department of Defense. The period of performance includes a one-year base period with the option to extend for up to four additional one-year periods, providing flexibility for ongoing support. The original solicitation was amended to extend the response deadline to August 14, 2026, with submissions due by 1:00 PM EDT. All work is to be performed at Goldsboro, NC, with the primary point of contact being Elizabeth Guernsey and secondary contact 1st Lt Jensen Jones for further inquiries. The contract opportunity is publicly accessible through the SAM.gov portal for interested vendors.
Other Computer Related Services

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 541611
Federal
Emergency Continuity of Services PlanningThe contract requires the development and maintenance of a comprehensive written plan to ensure the uninterrupted delivery of essential maintenance services during emergencies. This includes establishing procedures for remote operations and implementing robust crisis communication protocols to safeguard service continuity under adverse conditions. The plan must be detailed, actionable, and adaptable to a range of emergency scenarios, ensuring that critical maintenance functions can be sustained even when traditional operational environments are disrupted. This is a small business set-aside subcontract under NAICS code 541611, awarded by the Department of Defense through the 4TH Cons Squadron Cc, with performance required in Goldsboro, North Carolina, specifically at zip code 27531. The solicitation was posted on July 30, 2026, and responses are due by August 13, 2026, at 2:00 PM Eastern Time. Although no point of contact or agency office address is provided, the opportunity is restricted to qualified small businesses and focuses on strategic operational resilience within a military context.
Administrative Management and General Management Consulting Services

POSTED

12 days ago

DEADLINE

in 2 days
View Details
NAICS: 541512
Federal
Cybersecurity Compliance and Incident Reporting (NIST SP 800-171)The contract requires implementation of NIST SP 800-171 cybersecurity controls to safeguard covered defense information, ensuring compliance with federal standards for protecting sensitive data transmitted, processed, or stored within contractor systems. Immediate cyber incident reporting is mandated within 72 hours of discovery, with full cooperation required to provide forensic data upon request to support investigation and remediation efforts. This subcontract is designated as a Small Business Set Aside under the SBA, specifically reserved for small businesses, and is classified under NAICS code 541512 for computer systems design services. The place of performance is confirmed as Goldsboro, North Carolina, 27531, with the contracting entity being the Department of Defense through the 4th Cons Squadron. The solicitation was posted on July 30, 2026, and responses must be submitted no later than August 13, 2026, at 2:00 PM Eastern Time.
Computer Systems Design Services

POSTED

12 days ago

DEADLINE

in 2 days
View Details
NAICS: 541611
Federal
Technical Reporting and Documentation ServicesThe contract titled Technical Reporting and Documentation Services is a Small Business Set Aside under the NAICS code 541611, awarded by the Department of Defense through the FA4809 4TH Cons Squadron Cc, with performance required in Goldsboro, North Carolina, 27531. Bidders must submit detailed service reports within five business days following each maintenance event, and these reports must include comprehensive checklists, issue logs, corrective actions taken, and repair recommendations to ensure full compliance with documentation standards. The solicitation was posted on July 30, 2026, and responses are due by August 13, 2026, at 2:00 PM Eastern Time, with the opportunity exclusively reserved for small businesses as defined by the Small Business Administration. All reporting must be accurate, timely, and structured to support ongoing maintenance tracking and operational readiness for the government facility.
Administrative Management and General Management Consulting Services

POSTED

12 days ago

DEADLINE

in 2 days
View Details