Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INTERFACE UNIT, COMM

Active
SPE4A7-26-T-632PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of a Commercial Off-The-Shelf (COTS) Interface Unit, Communication, identified by NSN 5895-01-453-1844, with a quantity of 10 units to be delivered FOB origin within 166 days. The item is subject to stringent DLA packaging requirements aligned with MIL-STD-2073-1E and MIL-STD-129, including special marking code 39 for ESD sensitivity. Packaging must incorporate DOD-qualified ESD and EMI protective materials per MIL-PRF-81705, with Type I barrier material required for both ESD and EMI protection, and Type III barrier wrap if not otherwise specified. Suppliers must ensure all barrier materials originate from manufacturers listed on QPL-81705 and provide appropriate technical data if the solicitation’s preservation method does not explicitly address ESD/EMI protection. ESD and physical protection for leads, terminals, and protrusions are mandatory via container design or cushioning to prevent damage during handling and transit. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 Table 1 for zero-based sampling unless otherwise specified, with undefined attributes treated as major and acceptance criteria requiring zero non-conformances in the sample lot. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Cybersecurity compliance is enforced through CMMC Level 2 Self-Assessment, and the delivery must be made to the DLA Distribution Facility in New Cumberland, Pennsylvania. The item is subject to a zero variance in quantity, inspection and acceptance occur at destination, and the delivery deadline is January 31, 2027, with an original required delivery date of January 11, 2028. The contract is issued under solicitation SPE4A7-26-T-632P, with primary point of contact Jamiah Sutton at the Department of Defense.

General Info

Procure 10 COTS Interface Units NSN 5895-01-453-1844, FOB origin, ESD/EMI packaging, zero defects, CMMC Level 2, deliver to New Cumberland by January 31, 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-632P DLA Aviation Aug 10 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INTERFACE UNIT,COMM
INTERFACE UNIT,COMM
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS IS A COMMERCIAL OFF-THE-SHELF ITEM.
TECHNICAL DATA AVAILABILITY:
SAMPLING:
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
COMPAQ FEDERAL LLC 15476 P/N DETMI-SA
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-632P
SECTION B
PR: 7017742203 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017742203 0001 EA 10.000
NSN/MATERIAL:5895014531844
DELIVERY (IN DAYS):0166
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:K3 CUSH/DUNN MAT:P4 CUSH/DUNN THKNESS:A
UNIT CONT:B9 OPI:M
INTRMDTE CONT:NW INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
PARCEL POST ADDRESS:
W25G1U
SPE4A7-26-T-632P
SECTION B
PR: 7017742203 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/31/2027 Original Required Delivery Date:01/11/2028
SPE4A7-26-T-632P NSN/Part Number: 5895-01-453-1844 Quantity: 10 EA Purchase Request: 7017742203QTY: 10 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A7-26-T-630Z
The contract pertains to the procurement of one Installation Kit, Electronic Equipment with NSN 5895-01-677-7173 and part number 02-2856383-1, to be delivered in a single unit within ten days of contract award, with delivery terms set at FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, and must be strictly followed. Packaging and marking must comply with MIL-STD-129 and DLA Packaging Requirements, while palletization adheres to RP001 specifications. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Inspection and acceptance occur at the destination, with the delivery point being US Army SSA Powidz AB, Poland, and the freight shipping address matching the delivery location. The contract is governed under solicitation SPE4A7-26-T-630Z, with a required delivery date of August 3, 2026, and the unit of issue is each, with no variance permitted in quantity. Compliance with DLA procedures for transportation, marking, and documentation is mandatory, and the contract includes specific government-use identification codes and contact information for procurement inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE4A7-26-T-632H
The contract pertains to the procurement of a mounting plate identified by NSN 5895-01-686-6650 and part number 900169, with a quantity of five units to be delivered under solicitation SPE4A7-26-T-632H. All items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stipulated, and critical attributes are assigned the highest verification levels. The delivery is FOB origin with a 166-day delivery window, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, priced at $5.00 per unit, resulting in a total contract value of $25.00. The item is classified as a critical application, requiring full traceability and compliance with government identification and physical marking rules. The required ship date is January 31, 2027, and the original required delivery date is March 23, 2027, with zero variance permitted in quantity. Transportation logistics are governed by specific DLA procedural notes, and all performance obligations are bound by the terms specified in the solicitation and associated technical documents.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
INTERFACE UNIT, COMM
Solicitation # SPE4A7-26-T-631Z
The contract pertains to the procurement of an Interface Unit, Communications, identified by NSN 5895-01-524-4444 and part number 186846, with a requirement for 19 units to be delivered within 166 days from the contract date. Delivery is FOB origin and must be inspected and accepted at the destination, with strict compliance to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All units must bear Item Unique Identification (IUID) per MIL-STD-130 and the DFARS 252.211-7003 clause. Packaging must adhere to DLA standards including prohibition of mercury or mercury compounds in preservation, packaging, and marking materials, and palletization must follow RP001. The item is subject to cybersecurity requirements mandating a CMMC Level 2 Self-Assessment and incorporates technical and quality standards referenced from the DLA Master List. The contract includes no quantity variance tolerance and specifies delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 31, 2027. The solicitation, issued under contract number SPE4A7-26-T-631Z, falls under NAICS code 334290 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division with Jamiah Sutton as the point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A7-26-T-632Q
The contract pertains to the procurement of three units of LENS, LIGHT with NSN/Part Number 5850-01-470-4659 under solicitation SPE4A7-26-T-632Q, with a delivery requirement of 264 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Items must be physically marked as specified, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring prior authorization from the Department of State or Commerce. Only contractors with approved JCP certification, completed DLA export control training, and formal DLA authorization may access the controlled data. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact is Johanna Cruz Cruz.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
Federal
Fire Station Alerting System Design, Procurement, and InstallationThe contract pertains to the modernization of the Fire Station Alerting System at Eielson AFB, encompassing full lifecycle support from design and procurement through installation, integration with existing BRYX systems, testing, and eventual disposal of outdated equipment. The project requires seamless compatibility with legacy infrastructure while upgrading to current standards, ensuring reliable and timely alerting capabilities for emergency response operations. All work must be performed at the specified location, with strict adherence to technical specifications and system interoperability requirements. This is a Small Business Set Aside contract under NAICS code 334290, classified as a subcontract, with a response deadline of August 12, 2026. The contracting activity is managed by the Department of Defense under the FA5004 354 Cons Pk office, with performance localized entirely at Eielson AFB, Alaska, 99702. The procurement is exclusively reserved for small businesses, emphasizing opportunities for qualified eligible firms to support critical defense infrastructure modernization. No point of contact details are provided, and all proposals must be submitted before the stated deadline to be considered.
FA5004 354 Cons Pk

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 334290
New
Federal
Supply of Fire Alarm Control System Modules and Power Supplies
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
Supply of Strobes and Horn-Strobes
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
Supply of Duct Smoke Detectors
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
Supply of Manual Pull Stations
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
Supply of Heat Detectors
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
Supply of Relay Output Modules
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
Supply of Fire Alarm Smoke Detectors
US Embassy Mexico

POSTED

2 days ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
ROD ASSY
Solicitation # SPE4A7-26-T-632L
The contract concerns the supply of a ROD ASSY item identified by part number 123LM10192-1 and NSN 5342001610529, with a quantity of three units to be delivered FOB origin within 166 days, targeting a delivery date of January 31, 2027. The item is classified as a commercial item and a critical application item, subject to stringent quality and cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Physical identification and bare item marking must follow RQ017 and MIL-STD-129 specifications, with no special marking required. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using prescribed methods for preservation, wrapping, and containment as detailed in the QUP and packing code U. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and acceptance occurs at origin with no variance permitted in quantity. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, for both parcel post and freight shipping. The unit price is $3.00, resulting in a total contract value of $9.00. The item has no shelf life restriction. The solicitation number SPE4A7-26-T-632L was issued on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 332994, and the contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense. The point of contact is Jessica Gentry, reachable via phone and email. All requirements are governed by DoD standards, and transportation logistics must align with DLAD Proc Notes C19 and C20. The item must be delivered by manufacturers or non-manufacturers who meet tailored higher-level quality requirements and comply with inspection and acceptance provisions at the point of origin.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract pertains to the procurement of seven units of MMR R-T SLED for aircraft, identified by NSN 1680-01-522-5949, under solicitation SPE4A7-26-T-635Q with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, necessitating the contractor to be a certified third-party assessment organization. All supplies must comply with DLA packaging standards and inspection procedures at origin, and any non-accepted items must have government identification removed prior to disposal. The technical data associated with this item is controlled under either ITAR or EAR, restricting access and export to authorized parties only. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and receive formal approval from DLA to handle such data. Foreign nationals, including those employed by U.S. companies or subsidiaries, are included under these restrictions. Distribution is limited to contractors cleared by DLA and compliant with DFARS 252.225-7048. The contract is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact April Reed.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract is for the procurement of three Wiper Plate Assemblies with NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, responding to purchase request 7017011444. The items are subject to stringent technical and quality requirements referenced from the DLA Master List, with compliance tied to the version of the master in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must adhere to DLA standards, and physical identification of the bare item is mandated. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with the item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandated DLA training and questionnaire and received formal approval. The delivery deadline is 103 days after order, with performance location in Tracy, California, 95304-5000. The solicitation opens on August 9, 2026, and closes on August 17, 2026, with Rahsaan Deloney designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FUELING PRO
Solicitation # SPE4A7-26-T-631P
The contract pertains to the procurement of a BRACKET, FUELING PRO with NSN 5342-00-443-5628, for a quantity of 10 units, under solicitation SPE4A7-26-T-631P, with a delivery requirement of 166 days after award. The item must comply with a broad set of technical, quality, and regulatory requirements including CMMC Level 2 certification for the supplier as a third-party assessment organization, adherence to ISO 9001:2015 quality standards, and strict compliance with DLA packaging and inspection protocols. All supplies must be free from intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any such permitted items must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed required DOD training on export-controlled data handling, and have been formally authorized by DLA. The contract incorporates all relevant requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The point of contact for the solicitation is Jessica Gentry of the Department of Defense, and the place of performance is designated as New Cumberland, PA, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-635J
This contract pertains to the procurement of electrical insulation tape designated as a commercial item with a 12-month shelf life, extendable under RS055 requirements. The item is classified as a critical application product and must comply with Technical Data Package Revision B, Gen 3, in accordance with CID A-A-59474D Revision D dated 01/23/2024, with the part number AA59474 TY1 CL4 1W and NSN 5970010124280. All packaging, preservation, and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including special shelf life labeling code 33, and prohibit any mercury or mercury compounds in preservation materials. Packaging must follow DLA’s RP001 requirements, with units delivered in 36-yard rolls, palletized appropriately, and marked for government use with DNO005 as the freight forwarder and DNOX00 as the delivery destination in Kjeller, Norway. The item is supplied in a unit of issue of RO (roll), with a total quantity of two rolls, and delivery is required FOB origin within five days of award, with zero variance permitted in quantity. Inspection and acceptance occur at origin, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications. The solicitation number is SPE4A7-26-T-635J, with a required delivery date of August 12, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with James Sinks as the point of contact.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, ORIFICE, TIP
Solicitation # SPE4A7-26-T-634B
The item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333. Delivery is due within 82 days after award. The solicitation number is SPE4A7-26-T-634B, posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is nya.currie@dla.mil, with phone number 804-279-6982. The item is classified under NAICS code 336413 and is subject to strict export controls under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior written authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire, and received explicit DLA approval, may access the technical information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, CARTR
Solicitation # SPE4A7-26-T-632K
The contract pertains to the procurement of a seal assembly for a cartridge, identified by NSN 1650-00-589-1257 and part number 03211257, with a quantity of 58 units to be delivered FOB origin within 383 days. The item is classified as a critical application component, and no unit identification marking is required per the service customer’s request, though packaging must comply fully with MIL-STD-2073-1E and marking requirements under MIL-STD-129 without special codes. The contract incorporates technical and quality standards referenced from the DLA Master List, including packaging, demilitarization, cybersecurity certification at CMMC Level 2, and configuration change management. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Mercury and its compounds are strictly prohibited in the product except in defined exceptions such as batteries and sensors, with additional containment requirements for portable devices per NAVSEA 5100-003D. A separate first article test line item is included with a quantity of one unit, signaling that the contractor must conduct and submit a test sample as required by FAR 52.209-3; this line carries no separate charge unless otherwise stipulated, and its award is void if waived. All deliveries must be shipped to DLA Distribution San Diego, and the contractor is required to satisfy source approval documentation, inspection at origin, and adherence to tailored quality requirements for both manufacturers and non-manufacturers. The contract does not specify a shelf life, and pricing is fixed at $58.00 per unit for the main line item with no variance allowed in quantity.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-631G
The contract pertains to the procurement of five units of a support, structural item identified by NSN 1560-01-544-2830 under solicitation SPE4A7-26-T-631G, with a delivery deadline 124 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicability determined by the type of acquisition and relevant dates. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with specified attributes assigned strict verification levels or AQLs, and unspecified attributes treated as major unless otherwise defined. Zero non-conformances are required in sampling unless the contract states otherwise. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted supplies. Measuring and test equipment must be maintained and calibrated per applicable standards. The item involves components listed on Qualified Products or Manufacturers Lists, requiring compliance with procurement note H02. All special processes must be performed by NADCAP-approved organizations, as indicated on drawing 20145214. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies equally to U.S. entities and their overseas subsidiaries. DFARS 252.225-7048 governs this restriction. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire. Covering defense information is applicable, and non-tailored quality requirements based on SAE AS9100 apply to both manufacturers and non-manufacturers. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance at Tinker AFB, 73145-8000, and primary point of contact is Rekisha Burton.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details