Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Interior Design and Space Planning for Patient Care Conversion

Active

Federal

Response Deadline07/31/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)View Agency

NAICS

541410 - Interior Design ServicesView NAICS

Place of Performance

Poplar Bluff, MO, 63901, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 07:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design of former canteen space for conversion into patient care use, including layout, finishes, medical gas systems, and compliance with ADA and healthcare safety standards.

Similar Contracts

Same NAICS industry code

Stormwater Management and Drainage DesignThe contract seeks specialized design services for stormwater collection, detention, and treatment systems at park sites within the City of Issaquah, Washington, with a focus on hydrologic modeling to ensure effective water management and full compliance with state regulatory standards. The work requires technical expertise in stormwater infrastructure planning, including the analysis of runoff patterns, system sizing, and environmental controls aligned with Washington’s environmental and drainage regulations. The solicitation is issued as a subcontract under NAICS code 541410, which classifies it under architectural and engineering services, and responses are due by August 14, 2026. The project is being managed by the City of Issaquah through its public procurement platform, with no specific set-aside requirements indicated. All deliverables must meet local and state compliance benchmarks, and the successful bidder will be responsible for delivering designs that integrate seamlessly with existing park infrastructure while addressing long-term stormwater sustainability and regulatory obligations.

City of Issaquah

POSTED

DEADLINE

Interior Design for Government Facilities

Navfacsyscom Washington

POSTED

DEADLINE

in about 1 month

Pre-Production Planning & Creative Direction

Naval Surface Warfare Center

POSTED

DEADLINE

Interior Design and Space Planning ServicesThe contract award encompasses monthly interior design and space planning services for federal facilities under the Department of Defense, specifically managed by the Defense Logistics Agency. The work includes ongoing space planning, signage assessment, and layout optimization to enhance functionality and efficiency within facility environments, ensuring alignment with operational needs and regulatory standards. Services are performed under the NAICS code 541410, which classifies architectural and engineering services, and the contract is structured as a subcontract with no specified set-aside designation. Performance location details are not provided, and while the posting date is listed as July 16, 2026, the contract references a primary award and delivery order tied to SP470521D0001 and SP470525F0173 respectively, indicating an established procurement framework. The work is conducted on a recurring monthly basis to maintain and improve space utilization across federal installations.

Defense Logistics Agency

POSTED

DEADLINE

SLCC AAB 101 Office Remodel A&E services RFSQThe contract is for Architectural and Engineering Services related to the remodeling of the SLCC AAB 101 Office suite in Utah, aiming to transform the space into a collaborative environment accommodating 45 to 50 full-time, part-time, and hybrid staff. The scope includes demolition of existing offices, conference rooms, and storage areas, followed by design and implementation of open office layouts, hot-desking and hoteling areas, breakout rooms, small collaboration spaces, and private consultation areas. Services encompass schematic design, design development, construction documents, code approvals from Building Code Solutions and the State Fire Marshal, construction administration, as-built verification, value engineering participation, fire and water flow analysis, and all associated architectural, mechanical, electrical, structural, civil, and landscape engineering work. The project will utilize a value target design approach, with work beginning immediately after contract award and construction slated to start after February 1, 2027, contingent upon relocation of current users. The contract will be awarded through a Value-Based Selection (VBS) system, evaluating firms on a weighted point system totaling 200 points, with 120 points allocated for Project Management Approach—including scope, budget, schedule, communication, sub-consultant management, and closeout plans—and 80 points for Strength of Team, assessed by firm experience, project-specific team expertise, team member availability, and project manager qualifications. Final fee negotiation will occur with the top-ranked firm after technical evaluation, with no pre-determined contract value. The Basic Services Fee will be distributed across phases: 15% for schematic design, 20% for design development, 40% for construction documents, 5% for bidding, and 20% for construction closeout and warranty. The firm must comply with the DFCM Design Manual and SLCC CAD requirements, maintain required insurance coverage including $500,000 claims-made professional liability for construction budgets under $1.5M, $2M general and products-completed operations liability, $1M automobile liability, and work product coverage for drawings and digital media. Contractors must certify compliance with Utah’s Status Verification System for employee eligibility, affirm no conflict of interest with SLCC, and certify no involvement in a boycott of Israel as required by Utah Statute 63G-27-101. Submittals must be submitted electronically via the U3P portal by July 30, 2026, in a single combined document

POSTED

DEADLINE

Interior Design ServicesThe contract seeks qualified firms to provide interior design services for public and office spaces within a historic building, focusing on the development of layouts, finishes, furniture selection, and aesthetic enhancements that respect the building’s heritage while meeting modern functional requirements. The scope encompasses all aspects of interior design, ensuring cohesive and compliant design solutions tailored to the unique constraints and opportunities of a historic structure. The opportunity is listed as a subcontract under NAICS code 541410, tied to the County of Union in North Carolina, though specific location details are not provided. The solicitation was posted on July 14, 2026, with a response deadline of August 12, 2026, at 3:00 PM. Interested parties must submit proposals through the official portal prior to the deadline, and while no set-aside provisions are indicated, the nature of the work requires specialized expertise in historic preservation and institutional interior design. All proposals should demonstrate a clear understanding of adaptive reuse principles and the ability to deliver high-quality, code-compliant environments within a sensitive architectural context.

County of Union

POSTED

DEADLINE

Food and Beverage_Design_Consultancy_LDRRVIA Rail Canada is seeking a specialized Food and Beverage design consultant to provide independent advisory services for the LDRR fleet renewal program, focusing on the optimization of onboard F&B environments. The consultant will be responsible for validating and recommending improvements to spatial layouts, service concepts, and operational workflows to ensure they align with VIA’s passenger experience goals, operational needs, and the unique constraints of rail transportation, covering all phases of the design process. The role requires deep expertise in F&B design within transit environments and a clear understanding of how to balance functionality, efficiency, and customer satisfaction in a moving rail setting. Bids must be submitted by August 20, 2026, at 4:00 PM, with all solicitation documents available through the Merx portal under solicitation number 202606009. A fee may be required to access the bidding materials, and interested parties should review pricing details on the Merx website. The point of contact for inquiries is Olga Grijuc, who can be reached via email or phone. The contract is issued under the Government of Canada, and while no specific NAICS code or set-aside designation is provided, the work is expected to involve direct collaboration with VIA Rail’s design and operations teams across Canada.

VIA Rail Canada Inc.

POSTED

DEADLINE

FF&E PlanningThe contract under the title FF&E Planning seeks a subcontractor to design and specify furniture, equipment, and hardware for educational environments, including classrooms, laboratories, cafeterias, and technology infrastructure. The scope requires compliance with educational use standards and safety regulations, ensuring all items—ranging from seating and storage to lab apparatus and audiovisual systems—are tailored for functionality, durability, and student well-being. The work demands expertise in interior design and technical specifications aligned with institutional needs, leveraging knowledge of pedagogical environments and accessibility requirements. This subcontract is posted by DAS Procurement under the Connecticut state agency, with a solicitation window opening on July 1, 2026, and a response deadline of July 24, 2026. The North American Industry Classification System code 541410 identifies the work as architectural and engineering services related to interior design. While details such as location, point of contact, and set-aside status are not provided, the contract is accessible via the Connecticut DAS Procurement portal and is intended for qualified subcontractors capable of delivering comprehensive FF&E planning services for public educational facilities.

DAS Procurement

POSTED

DEADLINE

Flood Hazard Risk Analysis and ModelingThe contract titled Flood Hazard Risk Analysis and Modeling requires the performance of hydrologic and hydraulic modeling to establish base flood elevations, delineate floodplains, and simulate various flood risk scenarios in full compliance with FEMA standards. The work is intended to support federal flood risk assessment and mitigation efforts by providing accurate, data-driven analyses that inform land use planning, emergency preparedness, and insurance policies. The contractor must apply recognized modeling methodologies and technical protocols to ensure the reliability and regulatory acceptance of all delivered products. This subcontract, posted on June 30, 2026, has a response deadline of August 17, 2026, and is classified under NAICS code 541410 for architectural, engineering, and related services. The contracting agency is FEMA under the Department of Homeland Security, with no specified place of performance or point of contact listed. While details such as funding amount, subcontractor eligibility, or performance metrics are not provided, the scope emphasizes technical precision and regulatory alignment with federal flood map update requirements under the National Flood Insurance Program.

POSTED

DEADLINE

Facility Layout and Space Planning for Cannabis OperationsThe contract entails a comprehensive redesign of an internal facility layout in Sacramento to optimize space utilization for cannabis cultivation, manufacturing, and distribution operations within the existing square footage. The project focuses on reconfiguring the facility to align with revised allocations for each operational area, ensuring functional efficiency, regulatory compliance, and operational scalability without expanding the physical footprint. This effort requires detailed spatial planning and coordination to accommodate the unique requirements of each process stream while maintaining safety, accessibility, and workflow integrity throughout the facility. The work is classified under NAICS code 541410, indicating it falls under architectural services and related professional design services, and is structured as a subcontract under the City of Sacramento’s oversight. The place of performance is clearly identified as Sacramento, California, with a ZIP code of 95815, and the solicitation was posted on June 25, 2026. The project is part of broader efforts to enhance operational readiness within the local cannabis industry, leveraging professional design expertise to maximize the utility of existing infrastructure under evolving regulatory and production standards.

City of Sacramento

POSTED

DEADLINE

Drainage and Hydrologic/Hydraulic (H&H) DesignThe contract is for the design of stormwater drainage systems and the performance of hydrologic and hydraulic modeling to support bridges and roadways along the I-75 South Express Lanes project. The work is classified under NAICS code 541410, indicating it involves engineering services, and is structured as a subcontract requiring specialized technical expertise in water flow analysis and infrastructure drainage design. The solicitation was posted on June 24, 2026, with a response deadline of July 24, 2026, and is being managed by the Georgia Department of Transportation. All project activities are tied to the I-75 South Express Lanes corridor, though specific locations within Georgia are not detailed in the available data. The contract expects deliverables that ensure compliance with stormwater regulations and enhance the resilience of transportation infrastructure against flooding and runoff impacts.

Department of Transportation-2

POSTED

DEADLINE

CALL A SPECIAL ELECTION TO LEVY SPECIAL TAX IN PERMANENT ROAD DIVISION NO. 1000, ZONE NO. 13A PALA MESA ZONE A IN FALLBROOK AND RELATED CEQA EXEMPTIONSan Diego County is authorized to call a special election in Permanent Road Division No. 1000, Zone No. 13A, also known as Pala Mesa Zone A in Fallbrook, to allow registered voters to decide whether to impose a special tax dedicated exclusively to fully funding the operation and maintenance of local roads within the district. This initiative follows a formal process requiring the submission of a Special Tax Report to the Board, which details how the existing assessment system will be replaced with the proposed tax structure. The election will be conducted under applicable legal guidelines, and a public hearing is scheduled for December 9, 2026, where the Board will review the election results. If the special tax receives approval from at least two-thirds of participating voters, the Board will certify the outcome and adopt the corresponding ordinance to implement the tax. The action is exempt from certain environmental review requirements under CEQA, streamlining the process to enable timely community decision-making on local infrastructure funding.

San Diego County

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 255-NETWORK Contract Office 15 (36C255)

Same awarding agency

Z2DA--589A7-25-503 Prepare Site for Cath Lab Equipment FY26 NRMThe contract requires the contractor to fully renovate approximately 1,500 square feet of existing clinical space in Building 2 at the Robert J. Dole VAMC campus in Wichita, Kansas, to support the installation and operation of new cardiac catheterization equipment and its associated control and equipment rooms. Work includes selective demolition of existing systems and finishes, relocation and modification of architectural, mechanical, electrical, and plumbing systems, installation of new partitions, doors, and hardware, and application of new interior finishes such as ceilings, flooring, wall protection, and paint. The contractor must also prepare the site for government-furnished equipment by installing structural supports, modifying shielding, running conduits, and ensuring proper utility interfaces. All work must comply fully with the provided contract drawings, specifications, and design narratives, and must include full hazardous materials abatement of asbestos, lead, and mold in accordance with VA, EPA, OSHA, and state/local regulations. Construction must be executed in a phased and carefully coordinated manner to ensure uninterrupted medical services, as the work occurs within an active, occupied clinical environment. Strict adherence to Infection Control Risk Assessment (ICRA) protocols, noise and vibration limits, and daily coordination with the VA Contracting Officer’s Representative and end users is mandatory. The project is designated as a Service-Disabled Veteran-Owned Small Business Set Aside under NAICS code 236220, with the solicitation issued by the Department of Veterans Affairs through the 255-NETWORK Contract Office 15 in Leavenworth, Kansas. Responses are due by August 24, 2026, and performance will occur at the Wichita campus with a primary point of contact listed as Contract Specialist Tonesha Y King.

Commercial and Institutional Building Construction

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Z2DA--589A7-25-503 Prepare Site for Cath Lab Equipment FY26 NRMThe Department of Veterans Affairs, Network Contracting Office 15, is seeking a Service-Disabled Veteran-Owned Small Business (SDVOSB) contractor to perform construction and renovation work at the Robert J. Dole VA Medical Center in Wichita, Kansas, under Project Number 589A7-25-503. The project involves preparing approximately 1,500 square feet of existing clinical space in Building 2—including rooms 216-2, 216A-2, 217-2, 217A-2, 218-2, and associated support areas—for the installation of new cardiac catheterization equipment and its control systems. Work includes selective demolition, relocation or upgrade of architectural, mechanical, electrical, and plumbing systems, medical gas modifications, ceiling sterile air curtain improvements, installation of new partitions, doors, hardware, finishes, and site preparation for government-furnished equipment including structural supports, shielding, and utility interfaces. Hazardous material abatement for asbestos, lead, and mold must be conducted in strict compliance with VA, EPA, OSHA, and state/local regulations. All construction must occur within an active clinical environment, requiring carefully phased execution, uninterrupted medical services, strict adherence to Infection Control Risk Assessment (ICRA) protocols, and ongoing daily coordination with the VA Contracting Officer’s Representative and end users. The contract is a Firm Fixed Price type with an estimated value between $500,000 and $1,000,000, and the period of performance is 210 calendar days from Notice to Proceed, inclusive of final inspection and site cleanup. Only SDVOSBs registered in the System for Award Management (SAM) and the Veteran Small Business Certification database at sba.gov are eligible to respond, under NAICS code 236220 with a small business size standard of $45 million. The government will evaluate proposals using a Best Value Source Selection Process under FAR Part 15 and intends to award without discussions. The solicitation package, including drawings and specifications, is expected to be available for download on or about June 12, 2026, with proposals due on or about July 13, 2026. All inquiries must be submitted via email to Tonesha King at tonesha.king@va.gov with a specific subject line; no phone calls or hard copies will be accepted, and a single, mandatory

Commercial and Institutional Building Construction

POSTED

about 21 hours ago

DEADLINE

Clinical Training for Medical Staff

Professional and Management Development Training

POSTED

DEADLINE

White Glove Installation Service

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Ophthalmic Imaging Software Supply

Software Publishers

POSTED

DEADLINE

Optical Biometer Supply

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Automated Perimeter with Table Supply

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Slit Lamp with Table Supply

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Specialized Medical Equipment Logistics and White-Glove Installation Services

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Dental Model Trimmer Supply and Installation

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Bench-Mounted Dental Lathe Supply and Installation

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Dental Laboratory Sandblasting and Polishing Equipment Supply

Semiconductor Machinery Manufacturing

POSTED

DEADLINE