Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Interior Finishing and Fixture Installation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Interior Finishing and Fixture Installation is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a NAICS code of 238350 for building finishing contractors. It encompasses the full installation of interior components for housing units including doors, windows, cabinetry, flooring, and plumbing fixtures, aiming to complete residential structures to specified standards. The contract was posted on July 13, 2026, and while no specific location for performance is listed, the work is intended to support military housing initiatives under the broader Defense Logistics Agency mandate. No set-aside provisions or point of contact details are provided, and the award is linked through the DIBBS system under contract number SPE7L525P2221.

General Info

Interior finishing and fixture installation for military housing under DLA, NAICS 238350, contract SPE7L5225P2221.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

238350 - Finish Carpentry ContractorsView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7L5-25-T-4547.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOUSING ASSEMBLY, VA

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of interior components including doors, windows, cabinetry, flooring, and plumbing fixtures to complete housing units.

Similar Contracts

Same NAICS industry code

Springdale Job Corps Center ~ Staircase Repair/Replacement – Troutdale, OR

Solicitation # springdale-job-corps-center-staircase-repairreplacement-troutdale-or

Career Systems Development Corporation is seeking proposals from licensed contractors to address a safety deficiency at the Springdale Job Corps Center in Troutdale, Oregon. The project requires the rebuilding of a deteriorated second-floor exterior balcony and staircase at Academic Education Building 0018 to restore a necessary secondary exit. All work must comply with IBC 2024 standards and meet or exceed all accessibility design requirements. This subcontracting opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 238350. The project is subject to the Davis-Bacon Act under wage determination OR2026100, Revision 1. Interested contractors must submit their quotes by 5:00 PM PT on September 18, 2026. Proposals must include the cost of materials, cost of labor, total project cost, a detailed process for completing the work in a safe and compliant manner, and any specified exclusions. Coordination and site visit scheduling are managed by the primary point of contact, Sam Klein.

Career Systems Development Corporation

POSTED

about 4 hours ago

DEADLINE

Board Chambers Countertop Installation Project

Solicitation # PWB-2637.1

The County of San Benito is soliciting lump-sum quotes for the fabrication and installation of a new fixed wood countertop at the County Board Chambers located in Hollister, California. The project involves furnishing and installing a 2-inch-thick Monterey Cypress wood countertop, approximately 30 inches deep, across the Supervisors' main dais and the Clerk of the Board return area. The contractor is responsible for field verifying all dimensions and elevations, providing metal support brackets, and creating precise openings for microphones and cabling. The final product must feature a stain and protective finish that complements existing furniture, subject to County approval of a sample. The project must be completed within 30 calendar days from the Notice to Proceed, with a focus on minimizing disruption to facility operations. Eligible contractors must be registered with the Department of Industrial Relations and adhere to prevailing wage requirements. Mandatory qualifications include holding a valid California state license and maintaining one million dollars in comprehensive general and excess public liability and property damage insurance. Bidders are encouraged to be local, minority, or disabled veterans businesses, with a 3% local preference applied to goods up to 500,000 dollars. All submissions must be made via the OpenGov portal by September 21, 2026. The selected contractor must ensure all work meets building, accessibility, and safety codes and is responsible for the legal disposal of all construction debris.

Capital Improvement Projects

POSTED

about 16 hours ago

DEADLINE

Trim Carpentry and Custom Cabinetry

Capital Management/Executive

POSTED

about 17 hours ago

DEADLINE

in about 2 months

Commercial Carpentry and Framing Services

Capital Management/Executive

POSTED

about 17 hours ago

DEADLINE

in about 2 months

General Carpentry Services

Solicitation # GD 26-55

The Greater Dayton Regional Transit Authority (RTA) is soliciting bids for solicitation GD 26-55 to obtain as-needed general carpentry services across its various facilities in Ohio, including transit centers, administrative buildings, and the Wright Stop Plaza Tower. The scope of work encompasses commercial carpentry, framing, drywall, ceilings, doors and hardware, and finish carpentry. Services must be performed during normal business hours and coordinated to minimize disruption to public transit operations. The contract has an initial term of three years, with the possibility of two one-year extensions, for a total potential duration of five years. The engineer's estimate for the project is 1,640,000 dollars. The contract will be awarded to the lowest responsive and responsible bidder based on price, experience, financial responsibility, and equal opportunity employer status. Bids must be submitted via the OpenGov portal by November 3, 2026. Key requirements include a bid bond of 10 percent of the total bid amount, performance and payment bonds for the full contract price, and strict adherence to Buy America certifications and prevailing wage regulations. Contractors must also comply with FTA requirements, including seismic safety standards and non-discrimination guidelines. Payment is generally issued within 30 calendar days following invoice approval, and all work must be performed in a skillful and workmanlike manner subject to RTA inspection.

Capital Management/Executive

POSTED

about 17 hours ago

DEADLINE

in about 2 months

Joinery Contractors Framework

Solicitation # NHSL329-26

NHS Lanarkshire Health Board is seeking qualified contractors for the NHSL329-26 Joinery Contractors Framework to provide planned, reactive, routine, and emergency joinery services across its healthcare estate. The framework is divided into three lots: Lot 1 focuses on works below 5,000 GBP at University Hospital Monklands, Lot 2 covers works below 5,000 GBP across various community sites, and Lot 3 handles small works valued between 5,000 GBP and 50,000 GBP. While Lot 1 and Lot 2 will each have a single appointed contractor providing 24/7 emergency coverage, Lot 3 may appoint between three and five primary and reserve contractors through a quotation or mini-competition process. The contract will run for an initial term of 24 months, with the possibility of two additional 12-month extensions. All appointed contractors must ensure a safe and reliable service that maintains the continuity of clinical operations. Interested parties must submit their responses by October 19, 2026.

NHS Lanarkshire

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Cabinet Installation - Allen, OK

Solicitation # 27727

The Chickasaw Nation has issued solicitation number 27727 for cabinet installation services at a low rent unit located at 30569 County Road 1478 Unit 15 in Allen, Oklahoma. The scope of work includes the installation of kitchen upper and lower cabinets, countertops, and one 30 inch vanity featuring a countertop and right hand splash block, all finished in ebony stain with jamocha countertops. Interested parties must submit their responses by September 15, 2026. Coordination for scheduling should be handled via the provided contact number, and contractors should be aware that Davis Bacon wage requirements may apply to this project. Inquiries can be directed to the point of contact, Caitlen Wilkins.

Chickasaw Nation

POSTED

about 19 hours ago

DEADLINE

Door Hardware Specialist

POSTED

about 20 hours ago

DEADLINE

Exterior Door Replacement

POSTED

DEADLINE

Doors & Hardware

Baker Street Village RAD LP

POSTED

DEADLINE

Cabinetry & Countertops

Baker Street Village RAD LP

POSTED

DEADLINE

Finish Carpentry & Millwork

Kern Community College District

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

POSTED

about 15 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 15 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Commercial Printing (except Screen and Books)

POSTED

about 15 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS