Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Interior Trim and Wall Repair (Post-Installation Finishing)

Active

State & Local

Response Deadline08/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the repair and finishing of interior walls and trim that were impacted during the installation of new windows, requiring precise drywall patching, repainting, and restoration of baseboards to match existing finishes. The work is intended to restore the interior spaces to their original condition following construction activities, ensuring a seamless and professional appearance without visible damage or disruption from the window installation process. All tasks must be executed with attention to detail to maintain aesthetic consistency with the surrounding surfaces. The task is classified under NAICS code 238352, indicating it falls within the specialty trade contractor category for interior finish work. It is structured as a subcontract under the agency MOD001 - Modernization in Massachusetts, with performance required at a location in New Bedford, specifically identified as Floor, and a zip code of 02740. The opportunity was posted on July 29, 2026, and responses must be submitted by August 20, 2026, at 7:00 PM Eastern Time, through the CommBuys portal. There is no set-aside designation specified, and no point of contact is provided in the data, necessitating direct inquiry through the online platform for additional details.

General Info

Repair and finish interior walls and trim post-window installation in New Bedford, MA by August 20, 2026.

Agency

Massachusetts → MOD001 - ModernizationView Agency

NAICS

238352View NAICS

Place of Performance

Floor New Bedford, MA, 02740, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 07:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → MOD001 - Modernization

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → MOD001 - Modernization

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Repair and finishing of interior walls and trim disturbed during window installation, including drywall patching, painting, and baseboard restoration.

Similar Contracts

Same NAICS industry code

Tile and Flooring Installation (ADA-Compliant Surfaces)The contract calls for the installation of new wall and floor tiles with strict adherence to accessibility standards, specifically requiring slip-resistant flooring throughout, proper sloping in shower areas to ensure effective drainage, and seamless transitions to accommodate wheelchair users. All work must meet ADA compliance guidelines to guarantee safety and usability for individuals with mobility impairments. The project encompasses both structural and aesthetic elements of tiling, with attention to durability, water resistance, and smooth interfacing between different surfaces, especially where ramps or thresholds are present. The contract is classified as a subcontract under NAICS code 238352 for tile and flooring installation and is associated with MHA03 - Methuen Housing under the Massachusetts agency. The place of performance is located at Wilson Street in Chelmsford, Massachusetts, with a zip code of 01824. The solicitation was posted on July 29, 2026, and responses are due by August 18, 2026, by 6:00 PM Eastern Time. This opportunity is open to qualified contractors capable of executing precise, code-compliant installations in a residential or publicly funded housing environment, with an emphasis on inclusive design principles.

MHA03 - Methuen Housing

POSTED

DEADLINE

Exterior Wall and Siding RestorationThe contract titled Exterior Wall and Siding Restoration seeks qualified contractors to repair exterior wall systems damaged by wind or water, including wood, metal, and masonry siding, fascia, soffits, and trim. The work involves restoring these components to their original condition or acceptable functional standards, ensuring structural integrity and weather resistance. This is a subcontract opportunity with a North American Industry Classification System code of 238352, indicating it is specifically for siding and roofing contractors. The solicitation was posted on July 28, 2026, with a response deadline of August 27, 2026, and is managed by the Mississippi Department of Finance and Administration. While specific location details are not provided, the place of performance is within Mississippi. Bidders must be prepared to deliver comprehensive restoration services, adhering to industry standards for materials and workmanship. The contract does not specify a set aside status or point of contact, and all submissions should be made through the official MS.gov link provided.

MS DEPT FINANCE and ADMINISTRATION

POSTED

DEADLINE

Wood Fence Installation & ReplacementThe contract involves the supply and installation of new wood fencing, encompassing all necessary components such as posts, rails, and panels, alongside the complete removal and proper disposal of the existing wood fencing. Site preparation is included to ensure a proper foundation and alignment for the new structure, with work requiring compliance with local standards and safety practices. The project is scoped to fully replace the outdated fencing system with a durable, new installation that meets functional and aesthetic requirements. This subcontract is issued by the City of Roseville in California, with the place of performance located in Roseville, zip code 95747. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, at 10:00 PM Pacific Time. The North American Industry Classification System code 238352 indicates that the work falls under specialty trade contractors primarily engaged in residential and commercial fencing installation. The contract does not specify a set-aside type, and all details are accessible via the provided online link for further submission requirements and documentation.

City of Roseville

POSTED

DEADLINE

Carpentry and ADA-Compliant Fixture InstallationThe contract entails the installation of ADA-compliant vanities, countertops, doors, partitions, and grab bars, alongside necessary framing modifications to ensure accessible clearances throughout the facility. All work must adhere strictly to Americans with Disabilities Act standards to guarantee safe and functional use by individuals with disabilities, requiring precise measurements, material selection, and construction techniques to meet federal accessibility guidelines. The project is classified as a subcontract under NAICS code 238352 for carpentry services and is issued by the City of Eastman in Georgia. Bidders must submit responses by August 12, 2026, at 7:00 PM, with the contract solicitation posted on July 28, 2026. There is no set-aside designation specified, and the place of performance and point of contact details are not provided in the available data. All work must be completed in accordance with the technical and regulatory requirements for accessibility without deviation.

City of Eastman

POSTED

DEADLINE

Interior Finish Carpentry & Cabinet InstallationThe contract titled Interior Finish Carpentry & Cabinet Installation details the precise fabrication and installation of shaker-style cabinets, countertops, and wainscoting panels within a project located in West Sacramento, California, with a zip code of 95691. All work must meet high standards of precision fitting, including proper sealing and finish detailing to ensure durability and aesthetic quality. The scope requires skilled craftsmanship in aligning components, seamless joint transitions, and final surface treatments that meet architectural specifications. The project is classified under NAICS code 238352, indicating it falls under interior finish carpentry services, and is structured as a subcontract opportunity. The solicitation was posted on July 28, 2026, with a firm response deadline of August 18, 2026, at 8:00 PM local time. The contracting entity is the City of West Sacramento, operating under the state of California, and the work is to be performed locally at the designated place of performance. Bidders must be prepared to meet all technical and temporal requirements for submission, with no set-aside provisions specified. Participation is managed through the BidAmerica platform, and interested parties are expected to review all terms and conditions prior to submitting their proposals by the stated deadline.

City of West Sacramento

POSTED

DEADLINE

Carpentry and Interior FinishesThe contract pertains to commercial finish carpentry work for an arena facility, encompassing framing, door installations, trim work, and cabinetry. All work must adhere to professional standards appropriate for a large-scale public venue, ensuring durability, precision, and aesthetic quality. The solicitation is classified as a subcontract under NAICS code 238352, indicating it is for interior finish carpentry services. Bids are due by August 26, 2026, with the opportunity posted on July 24, 2026, through the Mississippi Department of Finance and Administration. The contracting agency is MPTAP, representing the state of Mississippi, though specific location details for performance or contact information are not provided. Interested parties must submit proposals by the stated deadline to be considered for award, with no set-aside provisions indicated for small or disadvantaged businesses.

POSTED

DEADLINE

Interior Flooring Installation – Vinyl Plank with SealantThe contract pertains to the supply and installation of vinyl plank flooring with a 20 mil wear seal coat across residential housing rehabilitation units managed by the Cherokee Nation Housing Authority. The work is specifically scoped for use in residential settings undergoing rehabilitation, ensuring durable, low-maintenance flooring that meets the standards for long-term occupancy. The 20 mil wear seal coat indicates a high level of protective durability, suitable for high-traffic areas and designed to resist scratches, stains, and general wear over time. Installation must be performed in accordance with industry best practices to ensure proper adhesion, alignment, and longevity of the flooring system. The solicitation is issued as a subcontract under NAICS code 238352, which classifies it under flooring contractors, and is directed toward qualified vendors capable of delivering and installing the specified materials within Cherokee County. The proposal submission deadline is August 11, 2026, with the opportunity posted on July 24, 2026, allowing for a four-week window for responses. The project is part of a broader housing rehabilitation initiative led by Cherokee Nation, emphasizing improved living conditions within federally supported residential units. All work must be completed at the designated places of performance within Cherokee County, with no additional geographic flexibility indicated.

Cherokee Nation Housing Authority

POSTED

DEADLINE

Ceiling Removal and Installation ServicesThe contract entails the complete removal of existing ceiling systems and the installation of new Armstrong ceiling tiles across approximately 2,020 square feet, with strict adherence to safety and environmental standards for the disposal of removed materials in accordance with local regulations. All work must be performed efficiently and professionally, ensuring minimal disruption and full compliance with applicable codes during demolition and new installation processes. This subcontract opportunity, posted by Hillsborough County in Florida under NAICS code 238352, is open for responses until August 14, 2026, with proposals required through the designated online portal. The effort is focused on a single facility location within the county, and while specific contact details and site address are not provided, interested parties must be prepared to meet all technical, logistical, and regulatory requirements outlined in the solicitation.

Hillsborough County

POSTED

DEADLINE

Kitchen Cabinet and Countertop InstallationThe contract involves the supply and installation of cabinets, countertops, and tile backsplashes across multiple kitchenettes at Fort Bliss, under a subcontract classified as a Service-Disabled Veteran-Owned Small Business Set Aside. The work is governed by NAICS code 238352, which pertains to plumbing, heating, and air-conditioning contractors, indicating the scope includes both material procurement and skilled on-site installation. The solicitation was posted on July 23, 2026, with a firm response deadline of August 25, 2026, and is issued by the Department of Defense through the W6QM Micc-Ft Bliss office, emphasizing compliance with federal procurement standards for small business set-asides. All work must be performed at the designated location in Fort Bliss, and bidders must be certified as service-disabled veteran-owned small businesses to be eligible. The contract does not include additional details on quantity, specifications, or payment terms, suggesting these will be outlined in the full subcontract documentation upon award.

W6QM Micc-Ft Bliss

POSTED

DEADLINE

Interior Carpentry and Drywall RepairThe contract titled Interior Carpentry and Drywall Repair pertains to the repair and reconstruction of damaged interior elements in residential units, including walls, ceilings, flooring, doors, and trim. Work is to be performed under a subcontract arrangement and is classified under NAICS code 238352, which covers finish carpentry services. The project is managed by the Cherokee Nation Housing Authority under the broader Cherokee Nation organization, with all work required to take place in Adair County. Bidding is open to qualified contractors who must submit responses by the deadline of August 12, 2026, with the solicitation posted on July 23, 2026. The scope focuses exclusively on interior finishes requiring skilled carpentry and drywall expertise to restore units to functional and aesthetic standards, though no specifics on unit count or funding amount are provided. Interested parties must engage through the designated online procurement portal for full details and submission procedures.

Cherokee Nation Housing Authority

POSTED

DEADLINE

Wardrobe Door ReplacementThe contract involves the removal and replacement of wardrobe doors in Bedroom 1 and Bedroom 2, requiring precise measurement, fitting, and installation to ensure seamless alignment with the existing cabinetry finishes and hardware. All work must be executed with attention to detail to maintain visual and functional consistency with the current interior design, using materials and techniques that match the original specification. The task is not simply a replacement but a tailored installation that preserves the integrity of the existing cabinetry system. This subcontract is issued by the U.S. Embassy in Lilongwe under the Department of State, with a solicitation posted on July 22, 2026, and a response deadline of August 5, 2026. The work is classified under NAICS code 238352, which corresponds to drywall and insulation contractors, indicating the specialized nature of the cabinetry work required. Performance is to take place in Lilongwe, Malawi, and the contract is open for submission by qualified subcontractors who can demonstrate capability in custom cabinet door fabrication and installation within an international diplomatic setting.

US Embassy Lilongwe

POSTED

DEADLINE

Kitchen Cabinet Installation and Associated PipeworkThe contract involves the removal of existing kitchen cabinets in the guest wing kitchenette and the installation of new cabinets, with full coordination required to reconnect plumbing and modify pipework to accommodate the new fixtures. This work is part of a subcontract under the US Embassy Lilongwe, Department of State, and is to be performed at the embassy compound in Lilongwe. The project requires specialized skills to safely dismantle old cabinetry while ensuring minimal disruption to existing plumbing systems and to install new cabinets that meet the functional and structural requirements of the space. All necessary modifications to water lines, drainage, and associated piping must be completed in alignment with local codes and embassy standards. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026. The North American Industry Classification System code 238352 applies, indicating the work falls under plumbing and HVAC contracting services. While no set-aside type is specified, the contract is designated as a subcontract, suggesting it is being procured by a prime contractor working under the embassy’s broader renovation or maintenance program. The location of performance is firmly established in Lilongwe, Malawi, and the scope demands precise coordination between cabinetry installation and plumbing adjustments to ensure a seamless, code-compliant outcome.

US Embassy Lilongwe

POSTED

DEADLINE

More opportunities from Massachusetts → MOD001 - Modernization

Same awarding agency

Debris Hauling and Job Site CleanupThe contract involves the removal and disposal of old windows, frames, and construction debris from two project sites, with a strict requirement that the job sites be left clean and free of debris upon completion. The work falls under NAICS code 562111, categorizing it as a debris hauling and waste management service, and is structured as a subcontract under the MOD001 - Modernization initiative managed by Massachusetts. The place of performance is specifically identified as Floor, New Bedford, with a zip code of 02740, indicating the physical location where services must be rendered. The solicitation was posted on July 29, 2026, and responses are due by August 20, 2026, at 7:00 PM, leaving a limited window for submissions. While no point of contact is provided and the type of set aside is unspecified, the contract emphasizes operational cleanliness and proper disposal practices as core deliverables.

Solid Waste Collection

POSTED

DEADLINE

Supply of Replacement Windows (Materials Only)The contract pertains to the supply of new residential windows for a full building replacement project across two sites in New Bedford, Massachusetts, with a strict focus on materials only, meaning no installation or labor services are included. The windows must meet detailed specifications outlined in the solicitation, ensuring compatibility and performance standards for the residential units undergoing modernization. The North American Industry Classification System code 423330 confirms the scope relates to building material and supplies merchant wholesaling, indicating the procurement is strictly for product delivery to designated locations. The contract is classified as a subcontract under the Modernization agency within Massachusetts, with a posted date of July 29, 2026, and a firm response deadline of August 20, 2026. All deliveries must be made to the specified place of performance at Floor New Bedford, ZIP 02740, and vendors are expected to adhere to timelines and quality requirements without additional on-site involvement. Participation requires timely submission of proposals by the stated deadline, and compliance with technical specifications is mandatory to qualify for award.

Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

DEADLINE

Window Removal and Installation LaborThe contract involves the complete removal of existing windows and installation of new windows at two residential buildings, with the explicit exclusion of bathing units from the scope of work. All labor for this project is to be performed in accordance with specified standards and timelines, focusing solely on window replacement activities and not including related structural modifications or finishes outside the window openings. The work is to take place at a location in New Bedford, Massachusetts, with the zip code 02740, and must be completed in compliance with all applicable building and safety codes applicable to residential retrofitting. This is a subcontract opportunity under NAICS code 238150, posted on July 29, 2026, with a response deadline of August 20, 2026. The contracting agency is listed as MOD001 - Modernization under the Massachusetts agency structure, although no specific point of contact or office address details are provided. The solicitation does not indicate a set-aside type or organization type, and the place of performance is limited to the specified city and zip code without additional address details. Interested parties must submit proposals by the stated deadline through the provided online portal.

Glass and Glazing Contractors

POSTED

DEADLINE

Window Replacement

Solicitation # BD-22-1221-MOD00-MOD-131648

All windows within the 720 and 726 Shawmut Avenue developments are to be fully removed and replaced, excluding those located inside bathing units. The replacement windows must maintain the exact same sizes and configurations as the existing ones. Interior window trim will be upgraded to wood, while exterior trim will be replaced with PVC material to ensure durability and low maintenance. The work is part of a broader modernization effort under solicitation BD-22-1221-MOD00-MOD-131648, issued by the Massachusetts agency MOD001 - Modernization. Bids are due by August 20, 2026, at 7:00 PM, with the solicitation posted on July 29, 2026. The project falls under NAICS code 238150 and is managed by Purchaser Trent Carter at the agency’s office in New Bedford, Massachusetts, with performance taking place at the specified addresses.

Glass and Glazing Contractors

POSTED

DEADLINE

Door Frame and Threshold ReplacementThe contract calls for the removal and replacement of damaged or outdated door frames, jambs, and thresholds, with all work requiring precise carpentry to ensure proper fit, level installation, and long-term weather resistance. The scope includes complete demolition of existing components, preparation of openings, and installation of new materials that meet structural and environmental standards for durability and performance. All labor must be executed to maintain architectural integrity and functional operation of doors throughout the facility. This subcontract is issued under NAICS code 238130 and is tied to the Massachusetts Modernization agency, with performance required at a location in New Bedford, Massachusetts, zip code 02740. The opportunity was posted on July 15, 2026, and responses are due by August 10, 2026, at 7:00 PM. The bid is accessible via a public procurement portal and is intended for qualified subcontractors experienced in residential and commercial door system refurbishment. There is no set-aside designation specified, and no point of contact details are provided within the data.

Framing Contractors

POSTED

DEADLINE

Door Hardware and Accessories Supply & InstallationThe contract pertains to the supply and installation of door hardware and accessories, including locks, deadbolts, hinges, closers, handlesets, and storm door components, all of which must comply with established durability and accessibility standards. The work is scoped as a subcontract under the agency designation MOD001 - Modernization, with performance required at a location in New Bedford, Massachusetts, specifically identified as Floor, with a zip code of 02740. The NAICS code 238290 indicates the work falls under other building equipment contractors, underscoring the specialized nature of the hardware installation services required. The solicitation was posted on July 15, 2026, with a firm response deadline of August 10, 2026, at 7:00 PM. While the contract does not specify a set-aside classification or organizational type, it is explicitly categorized as a subcontract, suggesting it is part of a larger procurement effort led by a prime contractor or government entity. All supplied items must meet rigorous functional and regulatory requirements to ensure long-term reliability and compliance with accessibility mandates, particularly for public or federally supported facilities. The location and agency context indicate the project is tied to infrastructure modernization efforts within Massachusetts, likely involving public buildings requiring upgraded security and access control systems.

Other Building Equipment Contractors

POSTED

DEADLINE

Exterior Storage Area Door ReplacementThe contract pertains to the removal and replacement of exterior storage unit doors, encompassing both metal roll-up and hinged door types, with associated structural modifications to ensure proper function and durability. Work includes frame anchoring to secure the new doors, adjustments to surrounding structures as needed, and comprehensive weatherproofing to protect against environmental exposure and maintain operational integrity. The project is classified under NAICS code 238990 and is structured as a subcontract with a response deadline of August 10, 2026. The place of performance is specifically identified as Floor New Bedford, Massachusetts, with a zip code of 02740. The contract was posted on July 15, 2026, under the MOD001 - Modernization agency, which is operating out of Massachusetts. All work must be completed in accordance with technical specifications and performance standards required for exterior storage areas in this location.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Exterior Residential Entry Door ReplacementThe contract calls for the full removal and replacement of exterior entry doors at residential units, covering both front and rear access points. All work includes installing pre-hung doors complete with weatherstripping and new thresholds, along with all necessary finishing touches to ensure proper function and aesthetic integration. The scope is focused on residential properties within the specified location, requiring comprehensive craftsmanship to meet structural and weather-resistant standards. The solicitation is designated as a subcontract under NAICS code 238930 for other building finish contractors, issued by the Massachusetts Modernization agency. Responses are due by August 10, 2026, and the work must be performed at the job site in New Bedford, Massachusetts, with a zip code of 02740. The posting date was July 15, 2026, and all contractors must adhere to the outlined requirements without deviation, ensuring compliance with construction and safety expectations for residential housing components.

POSTED

DEADLINE

Dottin Place II Exterior Doors, Frames, Hardware & Storm Doors

Solicitation # BD-22-1221-MOD00-MOD-131359

The project involves the replacement of front and rear entry doors, as well as exterior storage area doors at the Dottin Place II Development in New Bedford, Massachusetts, under a solicitation issued by the New Bedford Housing Authority. The estimated contract value is $225,000, and the work falls under NAICS code 236118 for new multifamily housing construction. All bids must be submitted electronically through www.biddocs.com by the deadline of August 10, 2026, with a mandatory 5% bid deposit payable to the New Bedford Housing Authority. Contractors are required to hold a current DCAMM Certificate of Eligibility in General Building Construction and must comply with Massachusetts General Laws Chapter 149, Sections 44A-J and 26 to 27H, which govern prevailing wage rates and construction safety standards. A pre-bid site visit is scheduled for July 23, 2026, at the Dottin Place Community Building, and requests for information must be submitted by July 31, 2026. There is no explicit statement of the award methodology, but the absence of listed evaluation factors, technical criteria, or weighted scoring suggests an intent to award based on the Lowest Price Technically Acceptable approach. The place of performance is clearly defined as Dottin Place II, New Bedford, MA, with no mention of delivery terms, FOB conditions, or packaging and marking requirements. No formal contract clauses, attachments, inspection criteria beyond statutory compliance, or detailed line-item pricing are provided. The New Bedford Housing Authority serves as the awarding entity, and while Nault Architects Inc. is identified as the designer, no contracting officer, COR, COTR, or PCO information is disclosed. Payment office details, accounting codes, invoicing systems, and representation requirements such as UEI/CAGE or socioeconomic status certifications are not included in the solicitation materials.

Residential Remodelers

POSTED

DEADLINE

Electric Ranges (Induction or Electric Coil) SupplyThe contract outlines the supply of 174 electric ranges for residential use in HUD-assisted housing units, requiring all units to meet established energy efficiency standards and be compatible with modern electrical installations. The ranges may be either induction or electric coil models, and must be suitable for long-term, high-use environments typical of subsidized housing. Delivery and installation are to occur at a specified place of performance in New Bedford, with the project falling under NAICS code 423690 for other appliance, appliance parts, and accessories merchant wholesalers. The solicitation is structured as a subcontract and is set to close on August 12, 2026, with bids due by 7:00 PM. The contract is administered by the Modernization agency under the Massachusetts office, with no specific set-aside designation indicated. Compliance with federal housing and energy requirements is mandatory, ensuring the appliances support safe, sustainable, and accessible living conditions for low-income residents.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Laundry Facility Electrical Panel Upgrade for Electric DryersThe contract calls for upgrading the electrical panel in a laundry facility to accommodate multiple electric dryers, requiring the installation of new 240-volt circuits, appropriate circuit breakers, and proper grounding systems compliant with the National Electrical Code. The work must ensure the panel can safely handle the increased electrical load without compromising safety or operational efficiency, with all components installed to meet current NEC standards for commercial laundry environments. The project is focused on modernizing outdated infrastructure to support multi-dryer operations necessary for high-volume laundry services. The solicitation is issued under the NAICS code 238210 for electrical contracting and is identified as a subcontract opportunity with a response deadline of August 12, 2026. The place of performance is clearly designated as New Bedford, Massachusetts, with a zip code of 02740. The contracting agency is listed as MOD001 - Modernization under the Massachusetts organization, indicating this effort is part of a broader infrastructure modernization initiative. All prospective bidders must submit proposals by the specified deadline to be considered for award.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Corridor Electrical Distribution Panel InstallationThe contract involves the design, supply, and installation of new corridor-mounted electrical distribution panels to support the re-feed of 174 residential units, requiring comprehensive conduit routing and proper grounding to meet electrical code standards. Work is focused on ensuring safe, reliable power distribution throughout the targeted facilities, with all components and installations adhering to industry best practices for durability and functionality. The project is classified under NAICS code 238210 for electrical contracting and is structured as a subcontract with a response deadline of August 12, 2026. Performance is to be completed at a location in New Bedford, Massachusetts, with an anticipated start following award under the MOD001 - Modernization agency framework. All materials and labor must be sourced and executed to fulfill the technical requirements without reliance on external documentation or referenced files.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE