Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Internal Spur Gear Fabrication

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of four finished internal spur gears for the DLA Weapons Support Land Supply Chain. The manufacturer is required to produce gears that meet NSN 3020017216549 and part number 5318831, adhering strictly to specifications provided by Honeywell International Inc. or Aero International, LLC. Production must be carried out using precision gear cutting and hobbing machinery at a performance location in New Cumberland. To be eligible for this project, the contractor must maintain a CMMC Level 2 self-assessment and ensure full compliance with DFARS 252.204-7012. The opportunity was posted on October 15, 2026, with a response deadline of October 26, 2026. The work falls under NAICS code 333612 and is managed by the Department of Defense.

General Info

Fabricate four internal spur gears for DLA meeting specific NSN and CMMC standards.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-1626.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GEAR, SPUR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures internal spur gears for prime contractors on DLA Weapons Support Land Supply Chain projects. Fabricates gears meeting NSN 3020017216549 and part numbers 5318831 per Honeywell International Inc. or Aero International, LLC specifications. Uses precision gear cutting and hobbing machinery. Requires CMMC Level 2 self-assessment and DFARS 252.204-7012 compliance. Delivers four finished internal spur gears.

Similar Contracts

Same NAICS industry code

ACTUATOR,ELECTRO-ME

Solicitation # N0010426QFC13

This contract involves the refurbishment and repair of an electro-mechanical actuator designated for critical shipboard systems, requiring stringent adherence to Special Emphasis SUBSAFE and non-Level I quality and control standards to prevent failure risks that could endanger personnel and vessel safety. The contractor, who must be the original equipment manufacturer (OEM) for sole source repair, is responsible for full teardown, evaluation, inspection, and restoration of the item to a like-new or "A" condition under a firm fixed price or not-to-exceed pricing arrangement, including providing a beyond repair/beyond economic repair estimate. Unique serialization and traceability of components are mandatory, along with strict compliance to specified welding, brazing, testing, and documentation requirements detailed in associated technical data packages and military specifications. Quality assurance is heavily emphasized, requiring the contractor to maintain and allow inspection of a quality management system consistent with ISO-9001 and related standards, maintain detailed inspection records, and comply with government and Defense Contract Management Agency oversight throughout production and subcontracting. Certification data, including certificates of compliance and test certificates, must be submitted electronically for government review and acceptance prior to shipment, with deliveries scheduled within 85 days from contract award. The contractor must follow rigorous configuration control procedures, obtain government approval for any deviations or changes, and ensure packaging meets military standards. The contract also stipulates compliance with various federal and military specifications, restrictions on hazardous materials such as mercury, and compliance with national defense priority ratings, reflecting the critical safety and operational requirements inherent in the contract.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Precision Gear Component FabricationThis subcontract for Precision Gear Component Fabrication is issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys. The project involves the manufacture of precision gears and internal components for prime contractors, utilizing CNC gear hobbing and grinding machinery to achieve aviation-grade tolerances. All work must be performed using aviation-grade alloys and adhere to technical data from the DLA portal, ensuring compliance with MIL-STD-1916 or ASQ H1331 and mercury-free processing standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 333612. Final deliverables must include finished precision gear components featuring NAVAIR traceability marking. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Gear ManufacturingThe Precision Gear Manufacturing subcontract, issued by the Defense Logistics Agency under the Department of Defense, requires the production of internal gears and drive components for prime contractors on aerospace projects. The selected provider must perform gear hobbing, grinding, and heat treatment to strictly adhere to the ratios and tolerances specified in Drawing 81755 654VE4867. To qualify, contractors must possess the necessary gear cutting machinery and heat treatment furnaces, and maintain either SAE AS9003 or ISO 9001 certification. This opportunity falls under NAICS code 333612 and involves the delivery of finished internal gear sets. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

Defense Logistics Agency

POSTED

DEADLINE

SOLENOID, ELECTRICAL

Solicitation # SPE7M5-27-T-1044

Solicitation SPE7M5-27-T-1044 is a fixed-price procurement issued by the DLA Weapons Support Active Devices Division for the supply of 74 electrical solenoids, identified by NSN 5945-01-369-0705. The contract requires delivery within 112 days, with shipping terms set as FOB Origin and the delivery destination located in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. The procurement is set aside for small businesses under NAICS code 333612, with specific size standards of 500 employees for those not manufacturing the end item. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additional compliance is required for component lead finish markings per IPC/JEDEC J-STD-609 and hazardous material labeling according to the Hazard Communication Standard. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. Proposals must be submitted via the DIBBS portal, and any offerors proposing alternate parts must provide a complete data package for evaluation.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A0-27-T-0196

Solicitation SPE4A0-27-T-0196 is a total small business set-aside procurement for two gear assemblies, identified by NSN 6660003309248. The contract is issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys under NAICS code 333612. Delivery is required within five days of award, with the final destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Both inspection and acceptance are designated at the point of origin. The contractor must adhere to strict quality and traceability standards, including NAVAIR Aircraft Launch and Recovery Equipment requirements and MIL-STD-1916 or ASQ H1331 for sampling. Bare item markings must include the contract number, NAWC CAGE, and part number. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements (RP001), while shipment marking follows MIL-STD-129. Additionally, the contract prohibits the intentional addition of mercury except for specific functional exceptions defined by NAVSEA. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and small business regulations.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1626

Solicitation SPE7L1-27-T-1626 is a fixed-price contract issued by the DLA Weapons Support Land Supply Chain for the procurement of four internal spur gears, identified by NSN 3020017216549. The requirement specifies part numbers 5318831 from Honeywell International Inc. or Aero International, LLC. Delivery is required within 118 days, with a need ship date of February 3, 2026, and an original required delivery date of May 24, 2026. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, including the prohibition of Class I ozone depleting chemicals and adherence to MIL-STD-1916 or ASQ H1331 for sampling. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information under DFARS 252.204-7012, and compliance with the Buy American Act and Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

GEAR ASSEMBLY, SPEED DE

Solicitation # SPE7L1-27-T-1655

Solicitation SPE7L1-27-T-1655 is a fixed-price procurement issued by the DLA Weapons Support Land Supply Chain for one Gear Assembly, Speed Decreaser, identified by NSN 3010012931390. The item is destined for the USS KEARSARGE LHD 3, with an original required delivery date of October 9, 2026, and a delivery window of 20 days after the order. Shipping must be conducted via the fastest traceable means, and the use of parcel post is strictly prohibited. The contract is classified under NAICS code 333612 and requires offers to be submitted based on FOB Origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates specific environmental and material restrictions, prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specified functional cases. Compliance with the Buy American and Balance of Payments Program and the Berry Amendment is required. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and reporting, and the contractor must comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information. Inspection and acceptance will occur at the destination per FAR 52.246-2.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-0173

Solicitation SPE4A5-27-T-0173 is a federal procurement issued by the Defense Logistics Agency for the supply of 6,000 bevel gears, identified by NSN 3020009005722 and Honeywell part number 2-080-031-04. The contract is set aside for small businesses and includes a price evaluation preference for HUBZone concerns. Delivery is required by October 31, 2027, with a need ship date of June 18, 2027. The terms are FOB Origin, with both inspection and acceptance occurring at the origin. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 or an equivalent inspection system and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA requirement RP001. Key regulatory requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and compliance with the Buy American Act and Berry Amendment. Invoicing and payment are managed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-0963

Solicitation SPE7L3-27-T-0963 is a fixed-price requirement issued by the Defense Logistics Agency for the procurement of three Gearcase-Motor units, identified by NSN 3010-01-111-1133 and featuring an overall length of 4.234 inches. The procurement is categorized under NAICS code 333612 and is designated as a restricted source item, requiring engineering source approval from the Government design control activity. Eligible offerors must possess an approved JCP certification and DLA controlling authority approval to access export-controlled data. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with both inspection and acceptance occurring at the point of origin. The delivery period is set for 92 days, with a required delivery date of April 4, 2026, to the DLA Distribution DSP New Cumberland Facility in Pennsylvania. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Invoicing and receiving reports are to be processed electronically via the Wide Area WorkFlow system. Key compliance requirements include CMMC Level 2 certification, adherence to the Buy American Act and Berry Amendment, and strict safeguarding of covered defense information per DFARS 252.204-7012. Failure to provide a Safety Data Sheet for hazardous materials prior to award may result in a determination of non-responsibility.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A0-27-T-0195

Solicitation SPE4A0-27-T-0195 is a total small business set-aside issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys for the procurement of two gear assemblies, identified by NSN 6660-00-330-9248. The contract requires delivery to the General Depot of Naval Supplies in Kaohsiung City, Taiwan, with a required delivery date of September 8, 2023, and a delivery window of five days after order. Inspection and acceptance are both designated at the point of origin. The procurement mandates strict adherence to quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for shipment marking. Bare items must be marked with the contract number, NAWC CAGE, and part number, meeting NAVAIR Aircraft Launch and Recovery Equipment traceability requirements. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Additionally, the contract prohibits the intentional addition of mercury and requires compliance with the Hazard Communication Standard for any hazardous materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS cybersecurity and safeguarding regulations.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

3010 : GEAR ASSEMBLY,SPEED DECREASER

Solicitation # SPE7L127Q0014

DLA Weapons Support

POSTED

DEADLINE

30--PULLEY,GROOVE

Solicitation # N0038326QPD29

Solicitation N0038326QPD29, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for one Pulley, Groove (NSN 3020-01-621-6794). The item is designated as a Flight Critical and ALRE Critical Safety Item (CSI) used in crucial shipboard aircraft launch and recovery systems. Due to the high risk associated with failure, the procurement requires Engineering Source Approval by the Naval Air Systems Command. Only approved companies are eligible for award, and new manufacturers may be subject to pre-award surveys and post-award conferences. The successful contractor must manufacture, test, and inspect the item in accordance with NAWC Lakehurst drawing 3890AS001309-01, Revision Latest. The contract mandates rigorous quality assurance and inspection protocols, including 100% inspection of critical and major characteristics, as well as plating, hardness, and non-destructive testing. A First Article Test (FAT) is required, involving a detailed test report and government witnessing. The contractor must support interim and final inspections conducted by DCMA and NAWCADLKE representatives. Delivery is required within 90 days, FOB Destination to DLA Distribution Norfolk, VA. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-130. Payment will be processed electronically via the Wide Area Workflow (WAWF) system.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

MUFFLER, EXHAUST

Solicitation # SPE7L1-27-R-0006

This procurement is for 100 exhaust mufflers, identified by NSN 2990-20-005-9022, managed by Contract Specialist Zachary Rodriguez for DLA Land and Maritime. The solicitation is expected to be issued around October 21, 2026, and close by November 20, 2026. The contract is designated as other than full and open competition and includes a 100 percent option that may be exercised at the time of award. Delivery is required within 140 days, with the quantity split equally between two locations in Albany, Georgia, and Tracy, California. Approved sources for this requirement include ESW Canada Inc and Technology Fabricators, Inc. Award decisions will be based on a combination of price, delivery, and performance, with all offers required in English and US dollars. This is a non-commercial item manufactured for military use, solicited under FAR part 15. Interested parties may submit proposals via the DIBBS system or email, ensuring the completed SF 33 Request for Proposal is included.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

in about 1 month

53--RETAINER,PACKING

Solicitation # SPE7L1-27-U-0087

Solicitation SPE7L1-27-U-0087 is a total small business set-aside issued by the Defense Logistics Agency (DLA) Weapons Support Land Supply Chain for the procurement of 579 packing retainers (NSN 5330-01-176-0932). This critical application item must be manufactured according to basic drawing 76823 2-43216, revision F. The required delivery timeframe is 48 days after the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Specific packaging requirements dictate that items be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with palletization following RP001. Additionally, the contractor must comply with export controls for technical data under ITAR or EAR and meet cybersecurity standards, including CMMC Level 2 and DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

53--RETAINER,PACKING

Solicitation # SPE7L1-27-U-0085

Solicitation SPE7L1-27-U-0085 is a total small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of 160 packing retainers, identified by NSN 5330001716769. This requirement is for a critical application item defined by military part standard MS28782E and non-government standard SAE AS8791D. The contract may result in an Indefinite Delivery Contract for a one-year period, with a delivery timeline of 70 days after the award. Shipping is designated as FOB Origin, while inspection and acceptance will take place at the destination. The procurement mandates strict adherence to technical and quality requirements, including the prohibition of asbestos and compliance with MIL-STD-130N for property identification. Packaging must follow MIL-STD-2073-1E and RP001, with specific requirements for items in Federal Supply Classifications 5330/5331 to be sealed in waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Marking must comply with MIL-STD-129. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with NIST SP 800-171 and DFARS cybersecurity standards. Award evaluation will be based on price quotes, with a preference given to HUBZone concerns.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7L1-27-U-0088

Solicitation SPE7L1-27-U-0088 is issued by the DLA Weapons Support Land Supply Chain for the procurement of 359 seal assemblies, identified by NSN 5330-01-065-3297. This is a commercial item procurement that may result in an Indefinite Delivery Contract for a one-year period. The delivery requirement is set for 126 days after receipt of order, with shipping terms established as FOB Origin under the First Destination Transportation program. Inspection will take place at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically requiring that all supplied items be free of asbestos. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129 and MIL-STD-130N. Offerors must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Evaluation will be based on price and technical compliance, with a price evaluation preference applied to HUBZone concerns. Invoicing and payment processing are required through the Wide Area WorkFlow system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

25--CUSHION,SEAT BACK,VEHI

Solicitation # SPE7L1-27-U-0086

Solicitation SPE7L1-27-U-0086 is an indefinite-quantity contract issued by the Defense Logistics Agency Weapons Support Land Supply Chain for the procurement of vehicular seat back cushions, identified by NSN 2540-01-110-9951. The requirement is for an estimated annual quantity of 76 units, with a guaranteed minimum quantity of 11 units once the contract becomes binding. The contract has a maximum value of 350,000.00 dollars and a delivery period of 126 days after the order is placed, with both inspection and acceptance occurring at the point of origin. The items must be manufactured according to TDP Rev A Gen 1 and specific reference drawings, with quality systems complying with SAE AS9003 or ISO 9001. Due to the nature of the technical data, this contract is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all labeling following MIL-STD-129 and MIL-STD-130. Compliance requirements include adherence to the Buy American Act and the Berry Amendment, as well as CMMC Level 2 certification via a C3PAO. Invoicing and payment must be processed through the Wide Area WorkFlow system. The solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns and is open for responses until October 30, 2026.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 5 hours ago

DEADLINE

53--LOCK SET,RIM

Solicitation # SPE7L1-27-U-0089

Solicitation SPE7L1-27-U-0089 is a request for a unilateral Simplified Indefinite-Delivery Contract (SIDC) for the procurement of 20 rim lock sets, identified by NSN 5340016786303. The requirement is managed by the DLA Weapons Support Land Supply Chain and falls under NAICS code 332510. The items must comply with basic specification FF-L-2890C Revision C and reference specification QPL-FF-L-2890-5 Revision 5. Because this is a Qualified Products List (QPL) item, the manufacturer must be approved by the Performance Review Institute at the time of the contract award. Delivery is required within 14 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must adhere to RP001 and MIL-STD-129, with non-hazardous materials following ASTM D3951. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. The government will award the contract to a responsible offeror whose quote conforms to the terms and conditions, with a submission deadline of October 30, 2026, via the DLA Internet Bid Board System.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Delivery ServicesThis subcontract for MIL-SPEC Packaging and Delivery Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing military packaging and marking in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and Special Marking Code 32. Additionally, the provider must adhere to RP001 and Special Packaging Instruction AK13111633 Rev B while managing specific 36-month shelf life requirements for the items. The contract requires the delivery of packaged units FOB Origin to New Cumberland, Pennsylvania. Managed under NAICS code 488510 for the Department of Defense, the project ensures that critical military supplies are processed and transported according to rigorous federal standards to maintain equipment integrity and readiness.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacturing of Access Covers (NSN 5340-01-311-1633)This subcontract involves the manufacturing of 61 Access Covers (NSN 5340-01-311-1633) for the DLA Weapons Support Land Supply Chain. The selected manufacturer must fabricate the units according to TDP Rev B Gen 2 and 19207 series drawings, ensuring all deliverables include the finished covers and a comprehensive First Article Testing report. Quality assurance is mandated through First Article Testing and zero-based sampling in accordance with MIL-STD-1916. To be eligible, the manufacturer must be listed on the QPL/QML and maintain strict adherence to ITAR/EAR regulations and CMMC Level 2 cybersecurity standards. The project falls under NAICS code 332710, with performance located in New Cumberland. Interested parties must submit their responses by October 26, 2026.

POSTED

DEADLINE

Freight Forwarding Services (California to Australia)This subcontract for Freight Forwarding Services involves providing transport and logistics management for prime contractors supporting DLA Weapons Support Land Supply Chain projects. The scope of work requires the management of international transit and customs clearance for supplies moving from a facility in California to the Joint Logistics Unit in Bandiana, Australia. The selected provider must ensure all shipments strictly adhere to DLA shipping and marking standards for international transit and guarantee delivery to the final destination. To be eligible, the contractor must hold authorized International Freight Forwarder status and maintain full compliance with both United States export laws and Australian import regulations. This opportunity falls under NAICS code 488510 and is associated with the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Coupling Clamps (NSN 5340-01-684-1596)This subcontract involves the manufacture or procurement of two certified specialized coupling clamps for prime contractors supporting the DLA Weapons Support Land Supply Chain. The components must strictly adhere to NSN 5340-01-684-1596 and Part Number AS5355/1-15B in compliance with AS5355 standards. All deliverables must meet RP001 packaging and MIL-STD-129 marking requirements to ensure proper handling and identification. The contract mandates strict adherence to the Buy American Act and the Berry Amendment regarding material sourcing. Additionally, the provider must maintain cybersecurity compliance in accordance with DFARS 252.204-7012. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Logistics ServicesThis subcontract opportunity, titled MIL-SPEC Packaging and Logistics Services, is issued by the Department of Defense for the DLA Weapons Support Land Supply Chain. The project requires specialized packaging and marking of defense articles to ensure full compliance with MIL-STD-2073-1E and MIL-STD-129 standards. Key technical requirements include the implementation of Preservation Method 31 and the rigorous management of shipping documentation for ITAR-controlled items to ensure receivers are ready for final destination inspection. The contract is designated as a Total Small Business Set-Aside under NAICS code 488510. Interested parties must submit their responses by October 30, 2026. This engagement focuses on providing critical logistics support to prime contractors to maintain the integrity and security of defense hardware throughout the supply chain.

Freight Transportation Arrangement

POSTED

DEADLINE

Automatic Gun Receiver Supply (Barrett P/N 18817)This subcontract is for the manufacture and supply of 68 automatic gun receivers, specifically NSN 1005016910592, following Barrett Firearms Manufacturing, Inc. specifications for part number 18817. The project supports the DLA Weapons Support Land Supply Chain and is designated as a total small business set-aside under NAICS code 332994. The selected contractor must maintain DDTC registration and CMMC Level 2 certification to ensure security and regulatory compliance. Additionally, the provider is required to adhere to strict demilitarization standards for small arms and maintain full supply chain traceability in accordance with DLAD Procurement Notes C03.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS