Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

International Logistics and Duty-Free Entry Compliance

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires coordination of the importation of foreign-sourced components for NASA, with strict adherence to customs procedures and compliance with duty-free entry provisions under FAR 52.225-8. All activities must include advance notification to NASA and accurate preparation of customs documentation to ensure lawful and efficient entry of materials into the United States without incurring duties. The work is performance-driven and centered on logistical precision, regulatory alignment, and timely submission of required notices and paperwork to avoid delays or penalties. This is a small business set-aside subcontract under NAICS code 488190, awarded by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The place of performance is located in Edwards, California, with a posted date of July 22, 2026, and a response deadline of July 29, 2026. Only eligible small businesses may respond, and the contractor must demonstrate capability in international logistics, customs compliance, and direct experience with federal procurement regulations governing duty-free importation. The solicitation does not specify a point of contact, so interested parties must refer to the SAM.gov portal for further details and submission instructions.

General Info

Small business subcontract for NASA duty-free import logistics in Edwards, CA, with strict customs compliance and advance notification requirements.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

Edwards, CA, 93523, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
ContactsNo contacts available
OfficeN/A
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Coordinate importation of foreign-sourced components, including advance notification to NASA, customs documentation, and compliance with duty-free entry under FAR 52.225-8.

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
FRAMEThis contract, issued under solicitation number SPEFA5-26-T-0940 by the Defense Logistics Agency Fleet Readiness Center, calls for the delivery of two FRAME units with a total contract value of $2.00, specified under CLIN 0001 with a unit price of $1.00 per each. The delivery is set for 17 days after order, with FOB Destination terms placing all transportation responsibilities and risks on the contractor until goods arrive at the designated location in Cherry Point, NC. Packaging and labeling must strictly follow ASTM D3951, with compliance to the DLA Master List of Technical and Quality Requirements taking precedence, and all packaging must be marked and labeled in accordance with MIL-STD-129, including proper unit of issue and quantity per unit pack as defined in the contract. Palletization must adhere to RP001, and all items must bear machine-readable barcodes per MIL-STD-129, including UCC/ITF-14 or GS1-128 formats. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ Z1.4, mandating zero non-conformances unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The contractor must provide hazardous material documentation in compliance with 29 CFR 1910.1200 and submit Safety Data Sheets as required by clause 252.223-7001. All deliveries must be transported using U.S.-flag vessels under 252.247-7023, and invoicing is required through WAWF. Offerors must maintain active UEI and CAGE codes, and if participating in socioeconomic programs such as HUBZone, SDB, WOSB, or SDVOSB, must provide full representations in SAM. Contract clauses include requirements for equal opportunity, combating human trafficking, employment eligibility verification, cybersecurity compliance via NIST SP 800-171 with approved deviation, subcontracting limitations with approved deviation, and whistleblower protections. The solicitation closed on July 30, 2026, and proposals were submitted via DIBBS, with no options or modifications specified. The original required delivery date is August 25, 2026, and the item’s NSN is 1560-LL-
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
MANIFOLD VALVE, AIRCThe contract specifies the procurement of a Manifold Valve, Aircraft with NSN 1730-01-528-9938 and part number 66353 from TESCOM CORP, for a total quantity of 31 units at a unit price of $31.00, resulting in a total contract value of $961.00. Delivery is required FOB origin with a delivery window of 223 days from the contract award, with the original required delivery date set for March 17, 2027, and a need ship date of March 15, 2027. The inspection and acceptance points are both at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization must adhere to DLA Packaging Requirements for Procurement, with precedence given to all applicable DLA Master List of Technical and Quality Requirements over ASTM standards. The item must be shipped to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with transportation governed by DLAD Proc Notes C19 and C20. The solicitation, issued under SPE8EF-26-T-1497, is a Women-Owned Small Business Set-Aside with a response deadline of August 3, 2026, and incorporates mandatory cybersecurity compliance through CMMC Level 2 Self-Assessment. Covered Defense Information requirements apply, and government identification must be removed from non-accepted supplies. The unit of issue is each, and compliance with all referenced DLA technical and quality standards is mandatory.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
BRACKETThe contract pertains to the procurement of one unit of Bracket, identified by NSN 5341-LN-003-5705 and P/N 71205-23001-104, under solicitation SPEFA3-26-T-0327, issued by the Defense Logistics Agency. Delivery is required within five days of contract award, with FOB destination as the delivery point and inspection and acceptance also occurring at the destination. The item is not subject to shelf life restrictions or Item Unique Identification requirements, and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; unspecified attributes are treated as major with an AQL of 1.0. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which overrides any standard unless explicitly superseded. Packaging must adhere to ASTM D3951 as supplemented by MIL-STD-129 labeling and DLA Packaging Requirements, with palletization following RP001. The unit of issue is each (EA), and no quantity variance is permitted. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated Fleet Readiness Center Southeast address in Jacksonville, Florida. The required delivery date is July 23, 2026, with the contract solicitation issued on July 22, 2026, and responses due by July 30, 2026. Government-specific identifiers, including the contract line item number, shipping codes, and program identifiers, are included for internal tracking and logistics coordination.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
FRAMEThis contract pertains to the procurement of a single unit of a critical application item, identified by part number 65211-02005-107 and NSN 1560LLNC10983, to be delivered within five days of award under solicitation SPEFA5-26-T-0944. The item is subject to strict technical and quality requirements dictated by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards, including ASTM D3951 for packaging. Packaging and labeling must conform to MIL-STD-129 and DLA Packaging Requirements, with palletization adherence to RP001, and no shelf life is applicable. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise specified, and attributes must be verified at designated levels. The item is designated as a critical application item supplied to SIKORSKY AIRCRAFT CORPORATION, and delivery is FOB destination to the Naval Base Coronado facility in San Diego, with no tolerance for quantity variance. Shipments must be sent via the fastest traceable means, explicitly prohibiting parcel post, and must be marked and addressed to the specified DLA Receiving Officer and freight destination. The contract specifies a sole quantity of one unit at a unit price of 1.000, with no total price adjustment permitted. The required delivery date is July 24, 2026, and the contract will be performed under the authority of the Department of Defense through the Defense Logistics Agency. All documentation, including unit of issue and packaging data, must align with the contract’s directives and the referenced DLA resources. Inspection and acceptance occur at the delivery point, and the item’s compliance is governed by tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The point of contact for the procurement is Larry Kemp, and the system-generated identifiers, including the TCN, RDD, and project codes, are provided for government tracking and logistics coordination. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, under NAICS code 488190 for other support activities for air transportation.
DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SETSCREWThe contract specifies the procurement of 60 set screws, part number 3168708-7, under NSN 5305-LL-NCC-3746, issued by the Defense Logistics Agency through solicitation SPEFA5-26-T-0939, with a total contracted value of $60.00 per unit for a combined price of $3,600. Delivery is required FOB destination within 95 days of the contract award, with no tolerance for quantity variance, and inspection and acceptance are to occur at the delivery point. The items must be packaged and labeled in strict compliance with MIL-STD-129 and ASTM D3951, with palletization adhering to DLA packaging standards, and all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements take precedence over all other standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The set screws have no shelf life limitations. The contract is a total small business set-aside under NAICS code 488190, with responses due by July 30, 2026, and the primary point of contact is Larry Kemp of the DLA Fleet Readiness Center. Deliveries must be shipped to the freight address at Cherry Point, North Carolina, with parcel post shipments directed to a separate PSC address. Packaging must conform to the specified Unit of Issue and Quantity per Unit Pack as outlined in the purchase order, and all markings must be compliant with MIL-STD-130N for military property identification. The original required delivery date is December 19, 2026, and the solicitations are managed through the DIBBS electronic acquisition system.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
STIFFENERThe contract pertains to the procurement of four units of a stiffener with part number 205-030-260-11 and NSN 1560-LN-002-7923, under solicitation SPEFA5-26-T-0938. Delivery is required within 13 days of contract award, FOB destination, with fixed quantity and zero variance allowed. All items must be packaged per ASTM D3951 and marked and labeled in accordance with MIL-STD-129, while adhering to DLA’s packaging requirements and the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling under MIL-STD-1916 or equivalent zero-based plans, and attributes must be verified at specified levels or AQLs. The material has no shelf life constraint. The unit of issue is each (EA) at a unit price of $4.00, totaling $16.00. Delivery is to be made to the Fleet Readiness Center DLA in Cherry Point, NC, with parcel post and freight addresses clearly defined. Packaging must be palletized as per DLA guidelines, and all markings must reflect the prescribed Unit of Issue and Quantity per Unit Pack. The contract references technical and quality standards identified by R or I numbers from the DLA Master List, whose applicable revision is controlled by the solicitation issue date. The required delivery date is August 24, 2026, and the point of contact for inquiries is Larry Kemp of the Department of Defense, DLA Fleet Readiness Center.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
POWER TURBINE STATOThis solicitation, SPE4A7-26-T-591Q, is a total small business set-aside for the procurement of one unit of a POWER TURBINE STATO with NSN 2840-20-002-1142, requiring delivery within 425 days. Offerors must comply with strict domestic sourcing requirements under the Berry Amendment, Buy American Act, and related DFARS clauses, with the Berry Amendment threshold lowered to $150,000; non-domestic material must be disclosed upfront in the quote or via written notification. The use of additive manufacturing for any supplied item is prohibited unless explicitly approved by the contracting officer, and offers including such items will be deemed ineligible for award. Offerors are strongly encouraged to provide quantity ranges in their quotes due to the volatile and fluctuating nature of purchase requests, enabling buyers to consolidate or adjust quantities without administrative burden, though this does not apply to Auto IDC. All offerors must certify that they will not provide covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit specific representations under FAR provisions for eligibility under designated categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, or historically underutilized business zone status. Effective within two months, all contractors must register through DLA’s Account Management & Provisioning System to access the Vendor Shipment Module for shipping compliance, and those using VSM WebServices must update their internal schema by the specified deadline or lose shipping capability. Failure to submit a “No Bid” entry on DIBBS when unable to quote by the closing date may result in assumptions of non-responsiveness, and all quotations must be submitted through DIBBS; Fast Pay is not applicable. Additional compliance details are available via APEX Accelerators for government contracting support at no cost.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
CONNECTOR BODY, PLUG, ELThe contract pertains to the procurement of four electrical plug connector bodies, identified by NSN 5935-14-478-8370 and part number 44036473, under a solicitation issued by the Department of Defense’s Maritime Supply Chain. The requirement is structured as an Indefinite-Delivery Contract with an estimated quantity of four units and a maximum contract value of $350,000, though the quantity is explicitly non-firm and subject to government placement of delivery orders within a one-year ordering period. Delivery must occur within 213 days of order placement on an FOB Origin pricing basis, with title and responsibility transferring at destination. Inspection and acceptance occur at the destination, governed by FAR 52.246-2 and sampling standards including MIL-STD-1916 or ASQ H1331, with a mandatory zero non-conformances policy for all attributes unless otherwise specified. Packaging must comply with RP001 for palletization, MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials, with DLA’s Master List of Technical and Quality Requirements taking precedence. If classified as hazardous under FED-STD-313, packaging must follow TQ IP025 and labeling must comply with 29 CFR 1910.1200, including prior submission of hazard labels and safety data sheets. Compliance with numerous FAR and DFARS clauses is mandated, including those covering cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, safeguarding information systems, and prohibition of certain equipment from Communist Chinese military companies. Contractors must hold a valid UEI and CAGE code, meet small business size standards if claiming socioeconomic status, and comply with electronic invoicing via WAWF. All submissions must be made through the DLA Internet Bid Board System by the deadline of August 6, 2026, and the winning contractor must address specific labeling, reporting, and documentation obligations for hazardous materials, with ongoing responsibilities to notify the government of any changes in material composition or classification.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency