Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INTRODUCER KIT, CATH

Active
SPE2DS-26-T-301UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.

General Info

Procure 14 Introducer Sheath Kits for ER-REBOA catheter, NSN 6515-01-663-2913, delivery in 84 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

ATTN CL VIII MED REQ PROCES ACT, APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-301U.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
INTRODUCER KIT,CATH
INTRODUCER SHEATH KIT, F/ER-REBOA CATHETER.
INTRODUCER SHEATH KIT<(>,<)>
7FR W/.035 INCH SHORT GUIDEWIRE
F/ER-REBOA CATHETHETER;
INCLUDES 18G NEEDLE, 30CC SYRINGE<(>,<)>
50ML 0.9 PERCENT SALINE, 5
FR CLAMP, NUMBER 11 SS SCAPEL<(>,<)>
AND 2-0 NYLON SUTURE REVERSE
CUTTING 30 INCHES.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BIDDER: SHALL SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-663-2913 Quantity: 14 KT Purchase Request: 7017726903QTY: 14 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,
Solicitation # SPE2DH-26-T-5737
The contract is for the procurement of 35 disposal containers designed specifically for the safe handling and disposal of hypodermic needles and syringes. Each container measures between six and seven inches in length and one to two inches in diameter, featuring a securable cap and a lift-off cover to ensure containment and prevent accidental exposure. The product must comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is identified by NSN 6530-01-645-6923 and is subject to controls related to covered defense information. The solicitation was issued under number SPE2DH-26-T-5737, with responses due by August 10, 2026, and delivery required within 20 days of award to Fort Bragg, North Carolina, 28310. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
BOARD, CARDIAC
Solicitation # SPE2DH-26-T-5738
The contract is for a single unit of a heavy-duty plastic cardiac board measuring 15 1/2 inches by 21 1/2 inches by 3/4 inch, identified by NSN 6530-01-716-9177, to be delivered within five days of award. All packaging and packing must comply with commercial standards as specified in the procurement document, requiring each unit to be sealed in a container that protects against damage or breakage and shipped in exterior containers suitable for safe transit by common carrier at the lowest possible cost to Joint Base Charleston, South Carolina. All markings must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date. The solicitation, issued under number SPE2DH-26-T-5738, was posted on August 3, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPLINT, ANKLE
Solicitation # SPE2DS-26-T-301F
The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-300U
The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-300P
The contract specifies the procurement of sterile surgical sponges measuring 4 inches by 4 inches, packaged two per sealed envelope, with twenty-five envelopes per box and twelve hundred sponges per package. Each unit must maintain a shelf life of sixty months, with no more than nine months elapsed between the manufacturer’s date and the delivery date to the government. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and must include the manufacturer date, expiration or retest date, contract number, and lot number. All packaging must be commercial-grade, sealed to protect contents from damage, and placed in suitable exterior shipping containers that ensure safe, low-cost delivery to the specified point of performance in APO, 96260-5479. The item, identified by NSN 6510-00-721-9808, is subject to technical and quality requirements listed in the DLA Master List, and bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-300P, requires delivery within fifty-three days and is governed by federal procurement rules with applicable defense information controls.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SEALING COMPOUND
Solicitation # SPE8ES-26-T-2486
The contract specifies the procurement of a black sealing compound, identified by NSN 8030-01-511-1245 and part number PR-2201 B1, with a unit of issue of 2.5 fl oz per kit and a total quantity of one kit. Delivery is required within ten days to Fort Rucker, Alabama, FOB destination, with no variance allowed in quantity. The item is classified as a Type 2 shelf life item with an initial shelf life of six months, extendable under specified conditions, and must be stored below 80 degrees Fahrenheit. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf life, and palletization must adhere to DLA packaging requirements. Hazardous material handling is governed by OSHA’s revised Hazard Communication Standard, requiring submission of approved Safety Data Sheets and compliant labels prior to award, along with employee training on the new classification and labeling system. The sealing compound must be shipped using the fastest traceable means, excluding parcel post, and is subject to inspection and acceptance at the delivery point. The solicitation is issued by the Defense Logistics Agency under contract number SPE8ES-26-T-2486, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026. The technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, applicable under the revision in effect on the solicitation issue date or award date.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
RESUSCITATOR, HAND OPER
Solicitation # SPE2DS-26-T-301E
The contract is for the procurement of 2 cases of adult medium hand-operated resuscitators with reservoir bags, each case containing six units, totaling 12 devices. The item is identified by NSN 6515-01-658-4300 and manufacturer part number 520 611 000 from AMBU INC. All units must be labeled with the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number, with all containers marked with “MFD” followed by the lot and manufacture date. Packaging must comply with DLA’s RP001 packaging requirements and Medical Marking Standard No. 1, superseding MIL-STD-129, and must adhere to ASTM D3951 unless overridden by higher-priority DLA technical and quality requirements. Each unit must be sealed in a protective container and shipped in commercial exterior packaging suitable for safe transit at the lowest rate to Beale Air Force Base, CA. The item is FDA-regulated, requiring referral through EBS for confirmation prior to award. Delivery is FOB destination within 20 days of contract award, with zero variance allowed in quantity. Shipments must be traceable, expressly prohibiting parcel post. The required delivery date is August 4, 2026, and all markings, labeling, and documentation must meet government standards for medical procurement as specified in the DLA Master List of Technical and Quality Requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
DRESSING OP-SITE PERME
Solicitation # SPE2DS-26-T-300T
The contract is for the procurement of 2 boxes of OP-SITE PERMEABLE dressings, each box containing 50 units measuring 10 cm by 14 cm, with the NSN 6510-01-162-1558. The requirement is part of a federal solicitation issued under SPE2DS-26-T-300T, with responses due by August 10, 2026, and delivery expected within 20 days of award. The product must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must adhere to DLA standards, and all non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being supplied. The order is managed by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, with performance at Camp Lejeune, North Carolina, and primary point of contact Tiffany Parker reachable via email or phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
NEEDLE, HYPODERMIC
Solicitation # SPE2DS-26-T-300X
The contract specifies the procurement of 12 packages of 18-gauge, 1.5-inch hypodermic needles, with each package containing 100 units, for delivery to Fort Bragg under solicitation SPE2DS-26-T-300X. All units must be individually sealed in commercial packaging that protects against damage or breakage and shipped in exterior containers compatible with common carriers to ensure safe, cost-effective delivery. The material must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and bidders must clearly identify the source and part number being supplied. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract includes requirements for the removal of government identification from non-accepted supplies and incorporates DLA packaging standards. Delivery is due within 20 days of award, with the point of contact for inquiries being Chandler Alvarez of the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
Federal
6515--STRYKER SYSTEM 9 SURGICAL SAW AND DRILL
Solicitation # 36C24226Q0871
The Department of Veterans Affairs, through its VISN 02 Network Contracting Office, is seeking information from potential suppliers capable of providing two Stryker System 9 Surgical Saw and Drill systems or equivalent equipment to support orthopedic, trauma, podiatry, hand, spine, and reconstructive surgeries at the VA New York Harbor Healthcare System. The requested equipment includes specialized surgical handpieces such as the Dual Trigger Rotary Handpiece, Reciprocating Saw, Sagittal (Digital) Saw, and various attachments including the Hudson, AO Small and Large Reamer, and modified Trinkle attachments, along with dual trigger wire and pin collets, a 1/4-inch locking keyless chuck, large rechargeable sterile batteries, a sterile battery charger, and a three-handpiece solid sterilization container bundle. The goal is to ensure surgeons have reliable, high-speed instrumentation for precise bone cutting, drilling, reaming, and implant placement. All items must meet or exceed specified technical requirements, with a preference for domestically manufactured products in the United States. Responses to this sources sought notice are strictly for market research and planning purposes and do not constitute a solicitation or commitment to award a contract. Interested parties must submit detailed information including company name, address, point of contact, small business size status under NAICS code 339113 (800 employees), whether they are manufacturers or distributors, and whether they modify or assemble the equipment. Additional details are required regarding subcontracting plans, federal contract holdings such as GSA or NASA SEWP, domestic manufacturing origin, and evidence demonstrating that any “equal to” solutions fully satisfy all salient characteristics of the specified systems. Pricing may be provided for market research only and will not be used for evaluation. All submissions must be sent via email to Wilmen.Joa@va.gov no later than August 10th, 2026, at 11 AM EST, and must include the respondent’s SAM.gov Unique Entity ID. Any subsequent solicitation will be issued separately and require a new, formal response.
242-NETWORK Contract Office 02 (36C242)

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
Federal
Cardiac Output Monitoring System
Solicitation # HT9426-26-NOI-TNM
The Defense Health Agency Contracting Activity, acting on behalf of the U.S. Army Institute of Surgical Research, intends to award a sole source firm fixed price contract to Becton, Dickinson and Company for an advanced cardiac output monitoring system. This action is justified under FAR 6.302-1 due to the unique and proprietary nature of the required system, which must integrate invasive and non-invasive hemodynamic sensors with predictive analytics and be fully compatible with the existing DREW data acquisition system used in swine research protocols. The system must employ a Swan Ganz catheter to continuously monitor key parameters including cardiac output, mixed venous oxygen saturation, stroke volume, systemic vascular resistance, right ventricular ejection fraction, right ventricular end diastolic volume, pulmonary artery pressure, and pulmonary artery occlusion pressure, using thermodilution principles with the Edwards Lifesciences 7.5 FR Swan-Ganz CCOmbo V set or an equivalent. The device must meet strict physical and environmental specifications, including dimensions no larger than 342 x 388 x 208 mm, a weight under 22 lbs, IPX1 ingress protection, a minimum 15-inch display, dual RS-232 serial ports, multiple USB and Ethernet connections, and a battery configuration of eight lithium-ion cells with specified voltage and current outputs. Operational and transportation environmental tolerances are defined for temperature, humidity, and altitude, and the system must maintain precise measurement accuracy and response times across all parameters. The contract requires a rolling stand with specific base dimensions and adjustable height, and the vendor must provide a 12-month standard warranty and a 24-month product support and protection plan. The solicitation is classified under NAICS code 339113 and Product Service Code 6515. Interested parties are invited to submit a capability statement, not to exceed ten pages, demonstrating their ability to meet all stated requirements, affirming SAM registration, and disclosing business size and ownership status. Submissions must be sent electronically as a Word or PDF file to the designated Contract Specialist by 5:00 p.m. Eastern Standard Time on August 18, 2026, referencing the Notice ID. All responses are non-returnable and strictly protected as proprietary, and no classified material should be submitted. This notice does not constitute a request for proposals or quotes, and no contract award will result from this solicitation; its purpose is solely to determine whether alternative sources exist
Army Medical Resources Acq Activity

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.
Family Planning Centers

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-300Q
An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325413
New
DIBBS
CHIP, HYDROGEN PEROX
Solicitation # SPE2DS-26-T-300S
The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CHIP, CARBON DIOXIDE
Solicitation # SPE2DS-26-T-301A
The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.
Family Planning Centers

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE SET, INTRAOSS
Solicitation # SPE2DS-26-T-301Q
The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL AND
Solicitation # SPE2DS-26-T-300Z
The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
TUBING, ANESTHESIA
Solicitation # SPE2DS-26-T-301G
The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-302G
The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details