INTRUMENT SIMULATOR SYNCHRO/RESOLVER

Combined Synopsis/Solicitation - F1S0AE0189B001 This is a combined synopsis/solicitation for commercial items prepared IAW the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and an additional written solicitation will be issued. This is a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisiton Regulation (FAR) and Supplements. NAICS is 334515 with a small business size standard of 500 employees. Solicitation is for commercial purchase of BRAND NAME OR EQUAL items. The Air Force Flight Test Center (AFFTC), at Edwards AFB, CA is seeking potential sources capable of providing the following BRAND NAME OR EQUAL requirement for AGFA, Supply, which includes the following requirements: Manufacture (North Atlantic Industries) Brand name or equal to the spec below. INCLUDES: Resolution 0.001 Output Channels 2 separate isolated outputs / Independent or combined 2-speed operation Signal Outputs Ch.1 & 2: Programmable for Synchro/Resolver & 1-90VL-L ;(< 25 mV DC offset). Two programmable operation modes: Ratiometric & Fixed. ??Ratiometric: Output VL-L tracks Reference Input voltage. ??Fixed: Output VL-L is independent of reference voltage. The Output VL-L, Reference voltage and frequency for each channel is measured and displayed on the front panel and also available via various digital outputs. Accuracy vs. Frequency & Load Frequency No Load Load Error < 3VA Load Error 3VA ? 6 VA 47Hz to 2 KHz - 0.005 0.005 / VA 0.015 / VA 2KHZ to 10KHz - 0.015 0.015 / VA N/A Angular Range 0.000-359.999 or - 179.999 programmable, or output angle can be viewed in degrees, minutes and seconds Two-speed mode Both outputs can operate as a single 2 speed simulator with a ratio from 2 to 255 Reference Voltage / Frequency 2V to 115 V as required. 47 Hz - 10 KHz. Reference Input Current < 2.5 mA Dynamic Motion Multiple modes, Continuous, programmable constant rate CW & CCW. Programmable Start / Stop angles and rate. Cyclical (Sinusoidal, Triangular, or Square wave) Output Angular Rate - 0.01 to 1.00 rps. at 60 Hz - 0.00 to 10.00 rps. at 360 Hz or higher Output rate resolution .015/sec. Output Rate accuracy - 1% Step function 0.0 to - 179.99 - Settling time < 100 ?sec for 180 step change Oscillatory Function Oscillation from Datum angle. Datum angle 0.00* to 359.99 Period 1.0 sec to 100.0 sec both sine and square wave function Amplitude 0.00 to - 179.99 Resolution 0.01 Accuracy 0.01 Constant Velocity or Ramp function 0.01 to 359.99 /sec Control Interfaces Ethernet, USB, and IEEE-488, Temperature Range 0 - 50'C operating; -20 - 60'C storage Input Power 85 Vrms to 265 Vrms, 47 to 440 Hz Weight < 6 lbs. Dimensions 12.5" L Delivery: 8 WARO or Less Place of delivery, performance, and acceptance is FOB Destination, Edwards AFB, CA 93524. The following provisions and clauses apply: Offerors are required to submit with their quote enough information for the Government to evaluate the minimum requirements detailed in this synopsis. CONTRACTORS MUST COMPLY WITH FAR 52.204-7 CENTRAL CONTRACTOR REGISTRATION (OCT 2003), DFARS 252.204-7004, ALTERNATE A (NOV 2003); ONLINE REPRESENTATIONS & CERTIFICATION (ORCA) (JAN 2005); & DFARS 252.212-7000, REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS (NOV 1995). TO REGISTER WITH CCR, GO TO URL: https://www.ccr.dlsc.dla.mil/. ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) MUST BE COMPLETED. USE OF ORCA BECAME MANDATORY 01 JANUARY 2005. CONTRACTORS CAN ACCESS ORCA THROUGH CCR BY INTERNET URL: http://www.ccr.gov/. Further Information on ORCA may be obtained from the ORCA Help Menu, . This help menu includes ORCA background information, frequently asked questions (FAQ), and the ORCA Handbook, 52.212-3 Alternate I, 52.225-4, 52.225-4 Alternate I, 52.222-22, 52.222-25, and 252.212-7000 with their offer. 52.252-1 -- Solicitation Provisions Incorporated by Reference. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this address: http://farsite.hill.af.mil. EVALUATION CRITERIA (Listed in Order of Importance from Greatest to Least) 1. Technically Acceptable 2. Delivery Schedule APPLICABLE CLAUSES THAT WILL BE INCORPORATED BY REFERENCE ARE AVAILABLE UPON REQUEST. Offers are due at the Air Force Flight Test Center, Directorate of Contracting, 5 South Wolfe Avenue, Edwards AFB, CA, 93524 (Attn: Porter Jefferson via email porter.jefferson@edwards.af.mil) no later than Close of Business (COB) 3 SEP 2010 at 1 pm PST.