Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Inventory Management and Material Support-Sole Source to Cherokee Nation Armored Solutions

Active
SPRRA226QSP04Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is a sole-source solicitation awarded to Cherokee Nation Armored Solutions for inventory management and material support services under solicitation number SPRRA226QSP04, posted on July 27, 2026, with a response deadline of August 11, 2026. The work falls under NAICS code 336414, which pertains to motor vehicle body manufacturing, and is managed by the Department of Defense through the Office of DLA Aviation at Redstone Arsenal, Alabama. Performance of the contract is required to take place in Tulsa, Oklahoma, with a ZIP code of 74103, indicating the operational focus is centralized there despite the agency’s administrative location. Primary point of contact for the solicitation is Lauren Tatum, reachable at lauren.tatum@dla.mil, with Anna Phillips serving as the secondary contact at anna.phillips@dla.mil. As a sole-source award, this contract bypasses competitive bidding, indicating an exclusive agreement with Cherokee Nation Armored Solutions likely due to unique capabilities, prior performance, or proprietary expertise. Interested parties must submit responses by the stated deadline to be considered, and further details regarding scope, deliverables, and technical requirements are contained in the referenced attachment, CNAS RFQ (SPRRA226QSP04).

General Info

Sole-source contract to Cherokee Nation Armored Solutions for inventory support in Tulsa, Oklahoma, under DLA Aviation.

Agency

Department Of Defense → Al DLA Aviation At HuntsvilleView Agency

NAICS

336414 - Guided Missile and Space Vehicle ManufacturingView NAICS

Place of Performance

Tulsa, OK, 74103, USA

Set-Aside

NONE

Documents

(1)

RFQ SPRRA2-26-Q-SP04 Secure Storage and Support Services

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Al DLA Aviation At Huntsville
Contacts2 people available
OfficeREDSTONE ARSENAL, AL, 35898-7340, USA
Organization / Agency
Department Of Defense → Al DLA Aviation At Huntsville
View Agency Profile
Office AddressREDSTONE ARSENAL, AL, 35898-7340, USA
Contacts
Lauren Tatum
contact@example.gov
Anna Phillips
contact@example.gov

Full Description

Show more

See attachment "CNAS RFQ (SPRRA226QSP04)" for a detailed description.

Similar Contracts

Same NAICS industry code

NAICS: 336414
New
DIBBS
CANOPY, EJECTION SEATThis contract outlines the procurement of a canopy assembly for an ejection seat, identified by NSN 1670-01-236-3820, with a quantity of 322 units and a purchase request number 7017564038 for a total of 409 units. The delivery timeline is set at 600 days after award, and the solicitation is issued under SPE4A7-26-Q-0881 with a response deadline of August 26, 2026. The acquisition is structured as a total small business set-aside under NAICS code 336414, with the Department of Defense’s ASC Supplier Oper AE and AF Division managing the process and Jesse Saul listed as the primary point of contact. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size, and include cybersecurity compliance as per CMMC Level 2 certification for third-party assessment organizations. The item is subject to stringent quality and procedural controls including tailored and non-tailored higher-level quality requirements aligned with SAE AS9100, inspection and acceptance at origin, and mandatory removal of government identification from non-accepted supplies. Packaging must comply with DLA standards, and physical identification and bare item marking are required. A shelf life of 156 months applies to this Type I (Code V) item, with no extensions permitted. Components referenced in this procurement must originate from suppliers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and all qualifying requirements noted in procurement note H02 are enforceable. Additionally, the contract designates the item as covered defense information, triggering compliance obligations for safeguarding sensitive data throughout the supply chain.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 336414
New
DIBBS
LEFT BASE ASSYThe LEFT BASE ASSY with NSN 4925-01-568-6999 is solicited under contract SPE4A7-26-Q-0879 for a quantity of two units, with delivery required within 198 days after award. This procurement is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is not required to be uniquely identified under DFARS 252.211-7003(c)(1)(i), but must comply with specific dimensional corrections listed on drawings 3305AS1702 and 3305AS1705, including a radius of 0.25 inches and a missing dimension of 0.190 inches in specified zones. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, restricting access to contractors holding valid US/Canada Joint Certification Program certification, having completed DLA-mandated export control training and questionnaire, and been formally approved by DLA. Government identification must be removed from non-accepted supplies, and all quality assurance protocols must strictly adhere to the referenced military standards. The solicitation was posted on July 27, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Mykhara Robinson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336414
New
Federal
AFSS Integration, HTV–2 Integration Kits, and ESR–19 Motor Transportation for MRBM T1/T2 Combined Sources Sought/Notice to Sole SourceThe Missile Defense Agency is seeking industry input on the integration of an Autonomous Flight Safety System and Hypersonic Target Vehicle – 2 Integration Kits for the Medium Range Ballistic Missile Type 1/Type 2 target platforms, with the intent to potentially award a sole source modification to Aerojet Rocketdyne Coleman Aerospace, Inc. if no viable alternative sources are identified. The agency requires an autonomous flight termination system that replaces the current command destruct functionality by using onboard tracking, computing, and pre-programmed safety criteria to terminate flight if trajectory thresholds are breached, aligning with a 2030 mandate to phase out traditional range-based destruct systems. The Hypersonic Target Vehicle – 2 integration involves modifying the existing MRBM T1/T2 booster interface, updating test procedures, analyzing system compatibility, and adjusting the Carriage Extraction System to accommodate the new front end, all while adhering to established interface control documents. The work is to be performed under the existing contract period ending December 2029, with no extension anticipated, and is grounded in the exclusive possession of the technical data package by Aerojet Rocketdyne Coleman Aerospace, which the agency cites as the reason for potential sole source justification under statutory authority and federal acquisition regulations. Industry respondents are invited to submit capability statements detailing their capacity to perform AFSS and Hypersonic Target Vehicle – 2 integration under MDA’s systems engineering processes, including detailed schedules and cost estimates, with submissions limited to 25 pages in Microsoft Word or Adobe Acrobat format. The agency specifically encourages small business participation and requires disclosure of subcontractor roles, business size status, and socio-economic classifications if teaming arrangements are proposed. Proprietary or sensitive information submitted carries the vendor’s sole responsibility for proper marking, and the government explicitly states it will not pay for responses nor provide feedback. Responses must be received by August 11, 2026, via email to the designated point of contact, and the effort falls under NAICS code 336414 for guided missile and space vehicle manufacturing, with primary performance expected in Florida. This notice is strictly a request for information and does not constitute a solicitation, obligation, or commitment to procure.
Missile Defense Agency (mda)

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336414
New
DIBBS
Qualified Manufacturer for Critical Gun PartsThe contract requires qualified manufacturers or suppliers to provide critical firearm components that are listed on the Qualified Products List QPL-3150-34 or an equivalent approved standard, ensuring alignment with stringent defense specifications. Performance under this subcontract mandates direct support for government testing and inspection activities, with no reliance on certificates of conformance to validate compliance. The work must be executed with full transparency and accountability, enabling rapid verification of product quality and adherence to military-grade requirements. Suppliers are expected to maintain rigorous quality control processes and be fully prepared to accommodate unannounced government oversight throughout the manufacturing and delivery phases. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is classified as a subcontract with a NAICS code of 336414, indicating focus on ammunition and firearm manufacturing. The opportunity was posted on July 24, 2026, with a response deadline of August 3, 2026. There is no specified set-aside designation, and performance location details are not provided, implying potential flexibility in production sites so long as all contract requirements are met. All parties must be prepared to operate in full compliance with federal defense procurement standards and deliver components that meet exacting performance benchmarks without the use of third-party certification as a substitute for direct government validation.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 336414
New
Federal
Notice of Intent – TMPC Core Subsystems - TapestryThe Naval Air Systems Command plans to award a sole source Indefinite Delivery/Indefinite Quantity contract to Tapestry Solutions, Inc. for the continued development, delivery, and sustainment of Theater Mission Planning Center subsystems, with an estimated start in Quarter 1 of Fiscal Year 27. The contract will include a base year and four option years, totaling up to five years of performance. Tapestry is the original equipment manufacturer of the Tomahawk Planning System and embedded TPS, and the government asserts that no other entity possesses the proprietary technical data, software source code, or specialized expertise necessary to perform this work without causing unacceptable delays, justifying the sole source procurement under 10 U.S.C. 3204(a)(1). This action is not a solicitation for competition, and the government retains full discretion to proceed without opening the requirement to bids regardless of responses received. Interested parties may submit information prior to the response deadline of July 29, 2026, solely to inform the government’s decision on competition, but no financial or contractual obligations are implied. All communications must be submitted in writing via email to Dawn Scher at the designated address; no phone inquiries will be accepted. Subcontracting opportunities are to be pursued directly with Tapestry. The primary place of performance is Saint Louis, Missouri, and the contract falls under NAICS code 336414.
Naval Air Systems Command

POSTED

6 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 336414
New
Federal
Notice of Intent – TMPC Core Software Subsystems - PeratonThe Naval Air Systems Command plans to award a sole-source, Indefinite Delivery/Indefinite Quantity contract to Peraton Technology Services, Incorporated for the continued development, delivery, and sustainment of critical Theater Mission Planning Center subsystems including the Mission Distribution System, TMPC Communications System, Enterprise Database, Operations and Status Tool, Intelligence Situational Awareness Tool, Logging Services, and Microservices. Peraton is the Original Equipment Manufacturer of these systems and the only source with exclusive access to proprietary technical data, software source code, and specialized expertise necessary to avoid unacceptable delays in support. The contract will have a base year and four optional years, with an expected start in Quarter 1 of Fiscal Year 27, and is being pursued under statutory authority permitting sole-source awards when only one responsible vendor can meet mission requirements. This notice serves as a formal intent to award without competition and is not a solicitation for proposals. Interested parties may respond with capability information by the deadline of July 29, 2026, to assist the Government in determining whether a competitive process should be pursued, but no obligation is incurred by the Government to proceed with a solicitation or award. All responses must be submitted in writing via email to the designated point of contact, and no phone inquiries will be accepted. Subcontracting opportunities are not managed through this notice and should be addressed directly with Peraton. The place of performance is Chantilly, Virginia, and the contract is classified under NAICS code 336414 with no set-aside for small businesses or other categories.
Naval Air Systems Command

POSTED

6 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 336414
New
Federal
Notice of Intent – TMPC Core Subsystems – BAE SystemsThe Naval Air Systems Command plans to award a sole-source, indefinite-delivery/indefinite-quantity contract to BAE Systems Information & Electronic Systems for the ongoing development, delivery, and sustainment of critical Theater Mission Planning Center subsystems, including the Targeting and Navigation Toolset, Geographic Information System, Conventional Prompt Strike Planning Tool, and CPS Command and Control Toolbox. This contract will have a base year followed by four option years, with an anticipated start in the first quarter of Fiscal Year 2027, and is justified under statutory authority permitting sole-source selection due to BAE Systems’ unique status as the original equipment manufacturer with exclusive access to proprietary technical data, source code, and specialized expertise necessary to avoid unacceptable delays. The procurement is not open to competition, as no other entity possesses the required capability, and the government has determined that awarding to any other source would significantly impede mission readiness. Interested parties may submit information prior to the response deadline to assist the government in evaluating whether competition is feasible, but submission does not guarantee a solicitation or award, and no financial or contractual commitment is implied. All inquiries must be submitted in writing via email to the designated point of contact, and potential subcontractors are directed to engage directly with BAE Systems.
Naval Air Systems Command

POSTED

6 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 336414
DIBBS
Parachute Canopy Assembly ManufacturingThe contract entails the manufacture of parachute canopy assemblies adhering to the National Stock Number 1670000049931, encompassing all critical fabrication processes such as precision cutting, high-strength sewing, and the integration of materials compliant with military specifications. All work must meet stringent defense standards to ensure reliability and performance under demanding operational conditions. The subcontract is issued under the NAICS code 336414, which classifies it within the aerospace product and parts manufacturing sector, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. Despite the absence of specific geographic details for performance or contact points, the contract is publicly accessible through the DIBBS system with the referenced award identifier, and was posted on July 21, 2026, signaling an upcoming procurement cycle aimed at sustaining critical airborne equipment supply chains.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 336414
DIBBS
Government First Article Test (FAT) ExecutionThe contract requires the execution of a Government First Article Test for a Track Assembly, Fuse with National Stock Number 1560-00-451-1993, ensuring that the design, materials, and manufacturing processes meet all specified military standards. This includes the complete lifecycle of the test effort—from developing a detailed test plan and conducting rigorous validation procedures to compiling and submitting a formal report that certifies compliance. The work is critical to verifying that the product is capable of consistent, reliable production prior to full-scale manufacturing. Performed under a subcontract with the Defense Logistics Agency operating under the Department of Defense, the effort is governed by NAICS code 336414, aligning with aerospace product and parts manufacturing. The contract was posted on July 20, 2026, and is linked to the award record identified by contract number SPE4A7-26-P-3477. While no specific location is provided for performance, all testing must adhere to U.S. Department of Defense requirements and deliverables, with the outcome directly influencing approval for procurement and fielding of the component.
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

N/A
View Details
NAICS: 336414
DIBBS
Electrical Components Manufacturing – Termination, Shield, Strap, Tiedown AssembliesThe contract entails the manufacture and supply of precision military-grade electrical components identified by NSN 5935014148379, specifically termination devices, shielding elements, straps, and tiedown assemblies designed for use in aerospace and defense systems. These components must meet rigorous military specifications to ensure reliability, durability, and electromagnetic compatibility under extreme operational conditions. The work falls under NAICS code 336414, indicating classification within the aircraft and spacecraft manufacturing sector, and is structured as a subcontract under the purview of the Defense Logistics Agency, a key component of the Department of Defense. Performance of the contract is expected to support critical defense infrastructure, though the precise place of performance is not specified. The solicitation was posted on July 20, 2026, and the contract is accessible through the DIBBS system under award number SPE7M526D62DK, with no set-aside provisions indicated, meaning participation is open to all qualified vendors regardless of business size or category.
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

N/A
View Details
NAICS: 336414
Federal
Landsat 10 SpacecraftThe National Aeronautics and Space Administration’s Goddard Space Flight Center is soliciting proposals for the acquisition of the Landsat 10 Spacecraft under RFP 80GSFC26R0015, with responses due by August 13, 2026. This solicitation replaces the previous draft RFP issued in May 2026 and is intended to secure a spacecraft system capable of delivering continuous, high-quality multi-spectral imagery for at least five years. The mission will operate from a 653-kilometer sun-synchronous low-Earth orbit and is designed to collect Visible to Shortwave-Infrared and Thermal Infrared data with a 26-band instrument suite, achieving a ground sampling distance of 10 to 60 meters and a swath width of approximately 164 kilometers. NASA will provide the space segment and launch services, while the U.S. Geological Survey will manage the ground system and mission operations. The spacecraft must meet stringent environmental requirements outlined in the Space Environmental Requirements Document, covering radiation, space charging, magnetics, atomic oxygen, and micrometeoroid/debris exposure, and must adhere to applicable standards such as MIL-STD-883 for microcircuits. The acquisition includes extensive technical deliverables governed by a series of attachments detailing critical interfaces and analytical models: the Spacecraft-to-Ground Interface Requirement Document, Payload-to-Launch Services Interface Description Document, Space Environmental Requirements Document, and Analytical Math Model Definitions, which require 3D CAD, thermal, structural, dynamic, and attitude control models to be submitted for verification. Government-furnished equipment and services are clearly delineated with precise timelines, including launch umbilical connectors and electrical interface connectors due at L-18 months, payload processing facility access from L-60 days through L+7 days, and propellant delivery one month prior to launch. The launch services provider support is tied to the observatory’s mechanical testing schedule, with select services required no earlier than 12 months before launch. All analytical models, including those for the spacecraft and instrument, must be delivered to the Landsat 10 Project Office. The solicitation includes key reference documents such as the Design Reference Case DRC-18 and the World Reference System-3 Definition to ensure consistent data alignment with the Landsat archive. No set-aside provisions apply, the NAICS code is 336414, and the contracting office is located in Greenbelt,
NASA Goddard Space Flight Center

POSTED

11 days ago

DEADLINE

in 16 days
View Details
NAICS: 336414
Federal
RFI-Drone CLTThe United States Special Operations Command is conducting market research to identify industry capabilities for designing and manufacturing a specialized unmanned aerial system compatible with the Common Launch Tube used on SOF fixed-wing platforms. This initiative seeks innovative, out-of-the-box solutions for a SOF-peculiar munition weighing no more than 55 pounds, with a maximum form factor of 5.9 inches in diameter and 42 inches in length, capable of being air-launched between 120 and 300 knots and at altitudes from 5,000 feet AGL to 35,000 feet MSL. The system must feature a passive seeker with integrated automatic target recognition, a kinetic warhead optimized for weight constraints, electro-optical and infrared sensors, and support for FANTOM Core collaborative autonomy via machine-to-machine API or Battle Management System integration. Minimum technical readiness level 6 is required, with a mission profile that includes pre-planned routing, a minimum 75-nautical-mile range, 40-minute loiter time at 500–3,000 feet AGL, and cruise speeds of 50–100 knots with a dash capability exceeding 100 knots. Responses must be submitted as unclassified white papers not exceeding 10 pages and include company details, CAGE and DUNS codes, point of contact, existing contract vehicles, Agile and spiral development experience, systems engineering and manufacturing processes, Modular Open Systems Approach and Weapon Open Systems Architecture compliance, development and production timelines, manufacturing maturity and monthly output estimates, and manpower requirements. The system must withstand extreme environmental conditions—temperatures from -40°F to 135°F, MIL-STD-810H vibration profiles, and a two-foot drop shock test—without icing concerns. A rough order of magnitude cost estimate is requested for a single demonstration on an AC-130J Ghostrider or other SOF platform, covering cost, schedule, assumptions, risks, and government-furnished equipment needs. Responses must not include classified, proprietary, or sensitive information, and submission does not constitute a contract offer or entitle respondents to reimbursement. All submissions are due by August 17, 2026, and will be used solely to inform future acquisition planning and strategy development.
Hq Ussocom

POSTED

11 days ago

DEADLINE

in 20 days
View Details

More opportunities from Department Of Defense → Al DLA Aviation At Huntsville

Same awarding agency

NAICS: 336419
New
Federal
Kuwait Deferred OPTEMPO Spares, Sole Source to Raytheon
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 17 days
View Details
NAICS: 334419
New
Federal
Labor to Assemble, Test, and Integrate Hardware for Qatar PATRIOT Spares - Sole Source to RaytheonThis contract is a sole-source solicitation issued by the Defense Logistics Agency (DLA) under the indefinite delivery requirements contract SPRRA2-25-D-0016, with solicitation number SPRRA226R0064, aimed at acquiring labor services from Raytheon to assemble, test, and integrate hardware components for the Qatar PATRIOT spares program. The work involves technical integration of specific military-grade parts listed in the spares document, including delay lines, fiber optic modems, power supplies, cable assemblies, and integrated control units, all to be delivered to Qatar. The solicitation is structured as a firm-fixed-price contract, with proposals due by 4:00 p.m. Central Standard Time on July 28, 2026, and must be submitted via email to designated DLA points of contact, Anna Phillips and Lauren Tatum. All proposals are required to be comprehensive, containing fully supportable cost data, labor category breakdowns, material and equipment costs, and subcontractor analyses, with explicit instructions to use the ProPricer system and submit an unedited, working Excel file containing all formulas and required tabs including P-Sheet, Direct Rates, Indirect Rates, CERS, and CER Factors. No pricing data is provided in the solicitation, indicating that offerors must determine all costs based on the stated technical requirements and regulatory constraints. The contract imposes strict compliance with federal acquisition regulations and national security provisions, including mandatory certifications regarding the absence of covered telecommunications equipment under FAR 52.204-24 and DFARS 252.204-7016, adherence to arms export control laws under the Arms Export Control Act and Executive Order 12470 requiring Joint Certification Program qualification for controlled technical data, and full disclosure of organizational conflicts of interest, with any identified OCIs needing a formal mitigation plan. Proposals must not contain assumptions or conditions, and all communications must be conducted only through the designated email channels to avoid disqualification. Offerors exceeding the TINA threshold must submit a Proposal Adequacy Checklist under DFARS 252.215-7009 and provide detailed documentation of indirect expense rates via forward pricing rate agreements or incurred cost submissions. Raytheon is further required to disclose if subcontracting exceeds 70% of the total work and must demonstrate value-added contributions. The place of performance is Massachusetts, with ultimate delivery to Qatar, and proposals must remain valid for
Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
MOTOR, ALTERNATING CURRENTThe Defense Logistics Agency is conducting market research to identify qualified sources for the acquisition of an alternating current motor, NSN 6105-01-172-7306, Part Number 11463228, destined for the M-D6 weapon system. This requirement falls under NAICS Code 335312 with a size standard of 1,250 employees and is currently designated for set-aside procurement under the Economically Disadvantaged Women-Owned Small Business (EDWOSB) program. The government holds complete technical data rights with no restrictions on engineering, tooling, or manufacturing, enabling full competitive potential for future solicitations. All prospective contractors must be prequalified and meet strict eligibility criteria, including active certification under the United States/Canada Joint Certification Program to access export-controlled technical data governed by the Arms Export Control Act and Export Administration Act. Export of controlled information outside the United States is strictly prohibited without prior government authorization, and offerors must ensure both their own and any supply chain sources possess valid certifications. Contractors interested in competing for future solicitations must be prepared to assume full responsibility for all manufacturing and production costs, including nonrecurring and recurring engineering, supply chain management, long-lead procurement, obsolescence mitigation, logistics, and final delivery. The requirement is not an active solicitation and does not obligate the government to issue a contract, nor is any funding available for response preparation. Responses are voluntary and will not be acknowledged or evaluated for current procurement purposes. Interested parties are directed to the AvMC public website for source approval processes and further information. All inquiries and submissions must be directed to the designated point of contacts at Redstone Arsenal, Alabama, and any participation is solely at the respondent’s own cost and risk.
Motor and Generator Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 21 days
View Details
NAICS: 334511
New
Federal
Louver, Metal - DoubleThe U.S. Department of Defense, through DLA Weapons Support at Redstone Arsenal, Alabama, has issued a sources sought notice to conduct market research for the new manufacture of a Double Metal Louver identified by NSN 1430-01-089-4575 and part number 10273249, intended for use on the M-D6 Patriot Weapon System. This notice is not a solicitation and does not represent a commitment to award a contract; no funds are available for response preparation. Interested parties must provide their company name, address, CAGE code, technical point of contact details, applicable NAICS code 334511, and business classification including small business, 8(a), women-owned, service-disabled veteran-owned, HUBZone, or small disadvantaged business status. Respondents must demonstrate capacity to manage full-cycle production including component fabrication, inspection, testing, packaging, shipping, supply chain coordination, and mitigation of diminishing manufacturing sources and material shortages. The government will use responses to assess market capability and determine the appropriate acquisition strategy, which may include a small business set-aside, full and open competition, or sole source procurement. All potential suppliers must be capable of performing under a performance-based service acquisition model and adhering to strict program schedules, cost controls, and risk management practices. Export control restrictions apply under the Arms Export Control Act and the Export Administration Act; both the offeror and any supply sources must possess an active United States/Canada Joint Certification Program certification to access controlled technical data. Importantly, the government will not delay award to accommodate certification applications or approvals. Responses are due by July 29, 2026, and should be submitted to Delora Crutcher or Jean Paul Bretz at the provided email addresses.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in about 22 hours
View Details
NAICS: 334412
New
Federal
Cable Assembly, ETC.The Defense Logistics Agency is pursuing a sole-source procurement under solicitation SPRRA2-26-R-0066 to add 123 spare parts supporting the Patriot Missile Weapon System to the existing DLA-Raytheon Subsumable Contract SPRRA2-25-D-0016, which operates under the negotiated Alpha 6 Umbrella Contract SPRBL1-25-D-0006. This action is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302-1, as Raytheon Company, with CAGE code 05716, is the original equipment manufacturer and the only responsible source capable of supplying these proprietary components. The procurement will be structured as a five-year Indefinite Delivery Requirements, Firm-Fixed Price contract, with all terms and conditions governed by the umbrella agreement. Offerors must meet strict prequalification criteria and are subject to design, build, supply, inventory management, forecasting, distribution, storage, reliability enhancements, and engineering maintenance obligations. The U.S. Army AvMC DEVCOM’s System Readiness Directorate serves as the engineering authority for source approvals, and firms seeking to compete in future efforts must submit inquiries to the designated email for source approval consideration. All communications regarding this procurement must be directed exclusively to Contract Specialist Jackson Cannon at jackson.cannon@dla.mil, with no telephone requests accepted. The solicitation will be published on SAM.gov, and inquiries must include the solicitation number, company name, CAGE code, name, phone number, and email address. The response deadline is set for August 11, 2026, though it may be adjusted pending the release date of the formal Letter RFP. Foreign entities must route all requests through their respective embassies. This acquisition involves technical data subject to export restrictions under the Arms Export Control Act and the Export Administration Act, and no data may be released outside the United States without prior government approval. While only Raytheon is eligible for this specific procurement, responsible sources interested in future opportunities are encouraged to establish source approval through the designated pathway.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336419
New
Federal
ACU & UACU Repair, Sole Source to On-Point Defense TechnologiesThe United States Government is seeking repair services for Armament Control Units (ACU) and Upgraded Armament Control Units (UACU) under a sole-source acquisition designated under FAR 6.302-1(a)(1), with On-Point Defense Technologies LLC as the only responsible source due to the unavailability of technical data, economic constraints in obtaining specifications, and the unique nature of the components. The contract, solicited under SPRRA2-26-Q-SP03 and classified under NAICS code 336419, will be awarded through the existing Indefinite Delivery Requirements contract SPRRA2-23-D-0015 to support the Tactical Aviation and Ground Munitions Project Office. The requirement includes 12 units of ACU (Part Number 13225434) and one unit of UACU (Part Number 13745403), and is restricted solely to the designated contractor because competitive sourcing is not feasible. All potential offerors must meet strict prequalification criteria to be eligible for award, though only On-Point Defense Technologies is currently qualified under the sole-source determination. Communication regarding the solicitation must be directed exclusively to Contract Specialist Ava Lowman via email at ava.lowman@dla.mil, with subject lines clearly referencing the solicitation number, and must include the sender’s name, company name, Cage Code, and contact information. The response deadline is set for August 11, 2026, though this date may be adjusted based on solicitation release timing, and will not close earlier than stated. Foreign firms must route all inquiries through their respective embassies. The performance location is Fort Walton Beach, Florida, with the contracting office located at Redstone Arsenal, Alabama, under the Department of Defense’s DLA Aviation at Huntsville.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
Federal
SPRRA226R0052 MULTI NSNThe solicitation SPRRA226R0052_0001 extends the proposal submission deadline from May 28, 2026, to August 19, 2026, with no other terms or conditions altered from the original solicitation. The contract remains a non-set-aside opportunity under NAICS code 335311, focused on multi-NSN procurement activities managed by the Department of Defense through the Defense Logistics Agency Aviation office located at Redstone Arsenal in Huntsville, Alabama. Proposals must be submitted by August 19, 2026, at 3:00 PM Eastern Time. Primary point of contact is Kristen Woodard, with Becky Brady as the secondary contact, both reachable via their respective DLA email addresses. The solicitation is publicly accessible through the SAM.gov portal with the provided link.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in 22 days
View Details
NAICS: 334511
New
Federal
COMPUTER, AIR DATAThe contract solicitation SPRRA1-26-R-0067 seeks a qualified manufacturer to produce the COMPUTER, AIR DATA (NSN: 6610-01-614-3703; P/N: 70600-01822-106) for the UH-60 BLACKHAWK helicopter system under a sole-source justification per FAR 6.302-1(a)(1), as only one entity has the proprietary technical data rights and access necessary to fulfill the requirement. The place of performance and contracting office are located at Redstone Arsenal, Alabama, with the Defense Logistics Agency Aviation at Huntsville serving as the procuring activity. The acquisition is restricted to firms with active United States/Canada Joint Certification Program (JCP) certification, as the technical data is export-controlled under the Arms Export Control Act and Export Administration Act, and the government will not delay award for applicants lacking this certification. The contractor must manage full lifecycle production including supply chain control, long-lead procurement, obsolescence mitigation, and delivery in compliance with DoD-STD-100 for item identification and traceability, though specific packaging, preservation, and marking standards beyond this are not detailed. Deliveries will be made on an as-required basis with no fixed delivery schedule or FOB terms defined. The solicitation is informational in nature, classified as a Sources Sought Synopsis, meaning no formal pricing, contract type, or award value is available, and no evaluation factors or scoring criteria have been released. Offerors must hold a valid Unique Entity ID and be certified under JCP; socioeconomic status claims are permitted but not required, with the NAICS code 334511 defining small business at 1,350 employees. Proposal submission is due by August 27, 2026, through the designated portal, with all communications directed to the primary point of contact at the Redstone Arsenal office.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 30 days
View Details
NAICS: 561910
New
Federal
Military Packaging and Crating ServicesThe contract requires comprehensive packaging, preservation, and crating of all deliverables in full compliance with MIL-STD-2073-1, MIL-STD-129, and ISPM-15 standards to ensure proper handling and international compliance during transportation. All work must be performed to meet stringent military specifications for protecting equipment and materials from environmental damage, corrosion, and physical impact during transit to DLA Cherry Point. The services are targeted toward military logistics readiness and demand strict adherence to approved procedures for labeling, containerization, and material preservation. This subcontract is solicited by the Department of Defense through Al DLA Aviation at Huntsville with performance location at Redstone Arsenal, Alabama, 35898. The NAICS code 561910 identifies the scope as other support activities for transportation, reflecting the specialized nature of military logistics support services. The response deadline is set for September 1, 2026, and bidders must be prepared to demonstrate capability in executing defense-grade packaging protocols, with all deliverables subjected to inspection and audit for compliance prior to shipment. Work must align with the defense supply chain’s requirements for reliability, traceability, and interoperability across DoD operations.
Packaging and Labeling Services

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 811212
New
Federal
IUID and Bar Code Marking ServicesThe contract seeks services for Item Unique Identification and bar code marking on qualifying deliverables, requiring the application of durable labels, submission of associated data to the IUID registry, and full compliance with federal marking standards. The work is tied to deliverables under the Department of Defense and will be performed at Redstone Arsenal, Alabama, with a response deadline of September 1, 2026. The contract is classified as a subcontract under NAICS code 811212, which corresponds to industrial and commercial cleaning services, though the actual scope is focused on precision marking and data management for defense assets. All activities must meet strict DoD requirements for traceability and asset identification, ensuring long-term accountability and logistics support across military supply chains.
Computer and Office Machine Repair and Maintenance

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332311
New
Federal
Airflow Deflector Manufacturing (NSN: 2805-01-327-4185)The contract requires the manufacture and delivery of 72 airflow deflectors identified by NSN 2805-01-327-4185, involving precise sheet metal fabrication to meet exact military specifications. All units must be produced in compliance with military standards for packaging, labeling, and documentation, ensuring readiness for immediate integration into defense systems. The work must be performed at Redstone Arsenal, Alabama, with a response deadline of September 1, 2026, and the contract is classified as a subcontract under NAICS code 332311, which pertains to sheet metal work manufacturing. The procurement is managed by the Department of Defense through the Defense Logistics Agency Aviation at Huntsville, with no set-aside provisions indicated, meaning any qualified vendor may bid without restrictions based on business size or ownership status.
Prefabricated Metal Building and Component Manufacturing

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332996
New
Federal
Gearshaft, Spur Manufacturing (NSN: 3040-01-364-1610)The contract is for the manufacture and delivery of 16 precision spur gearshafts identified by NSN 3040-01-364-1610, to be produced in full compliance with military specifications. Each gearshaft must be appropriately marked with IUID and bar code labeling as required for traceability and asset management within defense supply chains. The work is classified as a subcontract under NAICS code 332996, and performance must occur at Redstone Arsenal, Alabama, with ZIP code 35898. The opportunity was posted on July 23, 2026, and all responses are due by September 1, 2026, at 8:00 PM Eastern Time. The contracting activity is managed by the Defense Logistics Agency Aviation at Huntsville under the Department of Defense.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

5 days ago

DEADLINE

in about 1 month
View Details