This Solicitation opportunity from Montana was posted on November 6, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Invitation for Bids: One New 2026 Skip Loader

Closed

278State & Local

Submission Closed11/19/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # W50S9626QA018

The South Dakota Air National Guard’s 114th Maintenance Group is seeking one FOD Sweeper through a combined synopsis and solicitation issued as a Request for Quote under solicitation number W50S9626QA018. This procurement is classified under NAICS code 333120 with a small business set aside, limiting eligibility to concerns with fewer than 1,250 employees. The requirement is for a commercial item, and all specifications are detailed in the attached RFQ, with technical requirements outlined on page 4, instructions to offerors on pages 33–34, and evaluation criteria on pages 37–38. The solicitation was posted on August 8, 2026, with offers due by August 19, 2026, at 7:00 PM Eastern Time. The contracting office is located in Sioux Falls, South Dakota, and all correspondence should be directed to the primary point of contact, Steven Audinet, or the secondary point of contact, Eric Comes. Offers must be submitted through the designated SAM.gov portal, and all submissions will be evaluated based on the criteria specified in the RFQ to ensure compliance with the agency’s operational needs for flight line safety.

W7N0 Uspfo Activity Sdang 114

POSTED

DEADLINE

Heavy Excavator Equipment Supply – Diesel-Powered Crawler ExcavatorThe contract calls for the supply of a new or certified pre-owned diesel-powered crawler excavator equipped with a hydraulically operated hinged boom, designed to perform full digging, lifting, and dumping functions essential for civil infrastructure projects. The equipment must meet rigorous operational standards to support demanding construction and maintenance tasks under varied environmental conditions, with an emphasis on reliability, durability, and compliance with industry best practices for heavy-duty earthmoving machinery. The solicitation is open to qualified vendors who can deliver the excavator in timely manner and provide documentation verifying the condition and certification of pre-owned units, if applicable. The contract is issued under NAICS code 333120 and is structured as a subcontract with a response deadline of August 28, 2026, and was posted on August 7, 2026. It is administered by the Texas Department of Transportation under the Texas state agency and requires delivery and performance within Texas. Vendors must be prepared to meet technical, logistical, and compliance requirements without specified set-aside classifications, meaning all eligible suppliers may respond. The submission portal and further procedural details are accessible via the provided Texas SmartBuy link, and proposers are expected to ensure full alignment with state procurement protocols and equipment specifications.

Texas Department of Transportation

POSTED

DEADLINE

Front-End Loader Supply (John Deere 540M)The contract entails the supply of a new John Deere 540M front-end loader designed for seamless integration with the 5105ML tractor, ensuring full operational compatibility. The scope includes all necessary hydraulic linkage components, safety guards, and mandatory OEM compliance to meet manufacturer specifications and performance standards. The equipment must be delivered in accordance with original equipment manufacturer requirements to guarantee reliability, safety, and warranty validity. The solicitation is classified as a subcontract under NAICS code 333120 and is managed by the USDA ARS AFM APD, with the place of performance located in Byron, Georgia, ZIP 31008. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. Interested parties must submit proposals prior to the deadline to be considered.

POSTED

DEADLINE

Mobile Asphalt Batch Plant Design and IntegrationThe contract entails the full engineering design, integration, and assembly of a mobile asphalt batch plant with a production capacity of 160 tons per hour, including the integration of advanced control systems and comprehensive safety interlocks to ensure operational reliability and personnel protection. The plant must be engineered to meet stringent military standards for corrosion resistance and safety, ensuring durability and performance in harsh, austere environments. All components must be fully compliant with federal defense specifications and capable of rapid deployment and field operation. This subcontract, issued under a Small Business Set Aside classification, is assigned the NAICS code 333120 and is managed by the Department of Defense through the FA4861 99 Cons Lgc agency. The work is to be performed at a location with a zip code of 89191, and the solicitation was posted on August 7, 2026, with responses due by August 28, 2026. The project requires a high level of technical expertise in modular industrial equipment design and integration, with an emphasis on meeting military logistics and environmental resilience requirements.

POSTED

DEADLINE

Aberdeen Test Center CAT 299D3 Non-Line Of Sight (NLOS) Remote Operations Kit

Solicitation # W91CRB-CAT-299D3-NLOS

The U.S. Army Contracting Command at Aberdeen Proving Ground, Maryland, is seeking a firm-fixed-price contract to convert a government-owned Caterpillar 299D3 Skid Steer Loader, serial number LB301509 equipped with a forestry mulcher, into a remotely operated unmanned platform using the Caterpillar Command Non-Line of Sight (NLOS) Remote Operations Kit. This procurement follows simplified procedures under FAR 12.201 and is justified under FAR 12.102(a) as a brand-name limited source requirement. The contractor must provide all necessary hardware components including two vision kits (P/N 604-3425 and P/N 617-8508), a Wi-Fi kit (P/N 638-5489), a Mobile Mark LTM Dome Antenna (P/N 615-7741), a CISCO IW3702 CPU, and an Axiomatic Power Converter (P/N 603-6623), along with complete on-site installation of the system on the government vehicle and a single training session for up to three personnel. All components must be delivered and installed by September 30, 2026, at the Aberdeen Test Center, with full operational capability under all-weather conditions typical of the test site. The award will be made to the lowest price technically acceptable offer, subject to funding availability, with an estimated contract value of $50,000. Included deliverables include operator manuals and Certificates of Warranty for all original equipment manufacturer items, with a mandatory one-year commercial warranty effective upon final government acceptance. The North American Industry Classification System code is 333120, with a small business size standard of 1,250 employees, and no set-aside is applied. The acquisition will utilize the solicitation number W91CRB-CAT-299D3-NLOS, with the response deadline set for August 21, 2026, and no RFQ copies will be available on SAM.gov; interested vendors must monitor the site for updates. Point of contact for the contracting officer is Karen Gibson, and the requirements representative is Ben Gallardy. The requirement was amended to include the CAT Command Center, as detailed in the updated Statement of Work dated August 7, 2026.

POSTED

DEADLINE

801 RHS Asphalt Batch Plant

Solicitation # F3QCDK6166G008

This solicitation, numbered F3QCDK6166G008, is a total small business set-aside under NAICS code 333120 for the procurement of one asphalt batch plant, with a small business size standard of 1,250 employees. The contract will be awarded on a Firm Fixed Price basis, and the requirement is for delivery to Nellis AFB, Nevada, within 270 days after award. The evaluation process follows the Lowest Priced Technically Acceptable approach, where offers are first assessed on price and then on technical acceptability, with technical compliance determined on a simple pass/fail basis. To be considered technically acceptable, offerors must fully comply with all solicitation instructions, including submission of a complete Statement of Work, manufacturer details, model and part numbers, and all required documentation such as CAGE code, SAM Unique Entity ID, and proposed delivery schedule. Only electronic submissions via email are accepted, and all quotes must be submitted by 1000 PDT on 28 August 2026. All prospective vendors must be actively registered in the System for Award Management prior to award, and failure to do so will disqualify the offer. Questions regarding the solicitation must be submitted to the designated point of contact by 1200 PDT on 17 August 2026, with answers published by 1600 PDT on 19 August 2026. The solicitation incorporates numerous federal and defense acquisition regulations, including clauses related to cybersecurity, small business participation, labor standards, and installation access. Contractor personnel requiring entry to the installation must obtain proper identification passes through a formal request process, and contractors are responsible for managing access credentials, reporting emergency contact information, and ensuring compliance with base security protocols. The government reserves the right to award without further discussions or to make no award if submitted quotes fail to meet requirements or if prices are not deemed fair and reasonable. Attachment documents outlining salient characteristics, items list, and brand name justification are integral to the solicitation and must be referenced for full compliance.

POSTED

DEADLINE

Supply of Tracked Excavators (Configuration A1, A2, A3)The contract entails the procurement and delivery of three tracked excavators specifically configured for operation in extreme climatic conditions ranging from -35°C to +40°C, ensuring reliable performance in harsh, off-road environments such as gravel and untreated terrain. Each unit must be designed for aircraft transportability, enabling rapid deployment across remote or inaccessible areas, and must fully comply with original equipment manufacturer specifications, stringent safety protocols, and environmental regulations. The machines are intended for use by the Government of Canada under the Department of National Defence, with delivery and performance obligations centered within Canada. The equipment must meet technical standards that guarantee operational durability, minimal environmental impact, and compatibility with logistical constraints inherent to military and government operations. Bids for this subcontract are due by September 16, 2026, with the solicitation posted on August 7, 2026, under the NAICS code 333120 for construction machinery manufacturing. The opportunity is open to qualified suppliers responding to the Government of Canada’s procurement requirements, with no set-aside provisions specified. While no point of contact is listed, all submissions must adhere to the technical and contractual conditions outlined in the tender, and successful bidders will be expected to deliver fully functional, certified units that support mission-critical operations under extreme environmental stress. The contract emphasizes readiness, compliance, and logistical adaptability to meet national defense operational needs.

Department of National Defence

POSTED

DEADLINE

Solicitation # W8476-277193/A

The Department of National Defence is seeking to procure three tracked excavators for delivery to Canadian Forces Base Trenton, Borden, and Esquimalt, with an optional additional three units also available, all to be delivered within Canada within 180 days of contract award. While Trenton is listed as a delivery point, it serves only as a transitory location, as the final destination for one unit is CFS Alert in Nunavut, with the Crown assuming full responsibility for transporting the equipment from Trenton to Alert. This procurement is governed by the Nunavut Land Claims Agreement, underscoring the importance of compliance with Indigenous land rights and related obligations. Offers must be submitted electronically by the deadline of September 16, 2026, to the specified government email address, and may be submitted in either English or French. The Crown reserves the right to negotiate terms with suppliers, and all submissions are to be directed through the designated contracting authority, Dong Le, whose contact details are provided in the solicitation.

Department of National Defence

POSTED

DEADLINE

NLOS Remote Operations Kit SupplyThe contract requires the procurement and delivery of a complete Caterpillar Command NLOS Remote Operations Kit designed specifically for the remote operation of a CAT 299D3 skid steer loader. The kit must include all necessary components to enable full remote control functionality without line-of-sight limitations, ensuring operational capability in hazardous or inaccessible environments. The equipment must meet stringent technical specifications to guarantee compatibility, reliability, and safety during deployment under demanding conditions typical of military and defense applications. This is a subcontract solicitation issued by the Department of Defense through its Aberdeen Proving Ground office, with performance required at the 21005 ZIP code location. The solicitation was posted on August 6, 2026, and responses must be submitted by August 20, 2026, at 14:00 Eastern Time. The North American Industry Classification System code 333120 indicates the focus on construction machinery manufacturing, reinforcing the technical nature of the deliverable. This procurement is part of a broader effort to modernize remote-operated heavy equipment capabilities within defense operations.

POSTED

DEADLINE

Supply of Tractor Mower with Full Feature Set

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

Commercial Snow Grooming Drag Supply

W7NR Uspfo Activity Nyang 109

POSTED

DEADLINE

Supply of Two Road Maintainer Units (Bonnell Model 312 or Approved Equal)The contract seeks the procurement of two road maintainer units, specifically the Bonnell Model 312 or an approved equivalent, with detailed technical requirements including cutting edges designed for effective road surface maintenance, a specified working area to ensure operational efficiency, integrated lighting systems for visibility during low-light conditions, and hitch compatibility to ensure seamless attachment to standard support vehicles. All components must meet established performance and durability standards to support consistent maintenance operations in varied environmental conditions. The solicitation is classified as a subcontract under NAICS code 333120, indicating it falls within the construction machinery manufacturing sector, and is issued by Sat Team 1 Fws under the Department of the Interior. The opportunity was posted on August 6, 2026, with a firm response deadline of August 17, 2026, at 9:00 PM. The place of performance and point of contact details are not specified, and no set-aside provisions are indicated, meaning the contract is open to all eligible vendors regardless of business size or ownership status. Interested parties must submit proposals through the designated federal procurement portal prior to the deadline.

Sat Team 1 Fws

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The City-County of Butte-Silver Bow has issued an invitation for sealed bids to supply a new 2026 skip loader, with bids due by 4:00 p.m. on November 19, 2025. Bidders must submit their proposals to the Office of the Clerk and Recorder at the Courthouse in Butte, Montana, where the bids will be publicly opened at 7:30 p.m. on the same day during a Council of Commissioners meeting. The solicitation is posted on the county’s official website, and accommodations are available for persons with disabilities if requested by November 17, 2025. All bids must include a security deposit of at least 10% of the bid amount, in the form of cash, cashier’s check, bank draft, or bid bond, which will be forfeited if the winning bidder fails to enter into a contract within 15 days of award. The project is exempt from federal, state, and local taxes, and the successful bidder must adhere to applicable federal regulations, including equal opportunity and labor standards. The Council reserves the right to reject any or all bids. Questions about the bid process should be directed in writing to the designated equipment supervisor. The contract value is estimated between $80,000 and $120,000, and the project falls under NAICS code 333120.

General Info

Agency

Montana → Butte-Silver Bow CountyView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

MT, USA

Set-Aside

NONE

Documents

(1)

Invitation for Bids - One New 2026 Skip Loader - Butte-Silver Bow

PDF•ifb

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedNov 6

Solicitation

Response DeadlineNov 19

Deadline has passed

Submission Closed

11/19/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMontana → Butte-Silver Bow County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Montana → Butte-Silver Bow County

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

INVITATION FOR BIDSNotice is hereby given that the City-County of Butte-Silver Bow is requesting sealed bids or proposals for supplying heavy equipment for “NEW SKIP LOADER“ bids are invited and will be received at or prior to of 4:00 p.m. (Mountain Standard Time) on Wednesday, November 19th, 2025, at the Office of Clerk and Recorder of Butte-Silver Bow, Second Floor, Room 208, Courthouse Building, 155 West Granite Street, Butte, Montana, 59701.Said Bids or Proposals will be opened at a meeting of the Butte-Silver Bow Council of Commissioners in the Council Chambers at 7:30p.m. Wednesday, November 19th, 2025.Invitation for Bids will be posted on the BSB’s website at http://co.silverbow.mt.us/bids.aspx.Persons with disabilities who need an accommodation to participate in this public hearing should contact James Ouellette, ADA Coordinator; Butte-Silver Bow Courthouse, Room 209, 155 West Granite Street., Butte, MT 59701; 406-497-6433; or For security reasons, you must enable JavaScript to view this E-mail address. on or before November 17th, 2025 (3) working days of the noticed bid acceptance closing date time.All Bids must be accompanied by an amount of not less than ten percent (10%) of the aggregate of the Bid Proposed in the form of (a) lawful monies of the United States; (b) a cashier’s check, certified check, bank money order or bank draft, in any case drawn and issued by a National Banking Association located in the State of Montana; (c) a bid bond or bonds executed by a surety corporation authorized to do business in the State of Montana. These securities will be forfeited to the Butte-Silver Bow Government as liquidated damages if the requirements in the way of contract are not entered into within fifteen (15) days after the date of award by the Council of Commissioners.Federal Excise, local or state tax should not be included in the Bids as Butte-Silver Bow is exempt from it.The successful Bidder shall comply with all applicable Federal Regulations and Requirements which include but are not limited to, Section 2 Clause, equal Opportunity Clause, Executive Order 11246 and 11624, Federal labor Standards and Civil Rights Act. The Council of Commissioners reserves the right to reject any and all Bid Proposals.Questions regarding the documents shall be submitted in writing to Tim Seymour, Equipment Supervisor at For security reasons, you must enable JavaScript to view this E-mail address..By order of the Council of Commissioners.