Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

ISO/IEC 17025 Calibration Services for Fluke 5560A/2G Units

Active

International

Response Deadline08/12/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Accredited calibration services are required for Fluke 5560A/2G calibrators, ensuring compliance with ISO/IEC 17025 standards and traceability to the National Research Council of Canada. Each calibration must result in a certificates valid for 90 days from the date of delivery, ensuring ongoing measurement accuracy and regulatory adherence. The contract is issued as a subcontract under the NAICS code 541380 by the Department of National Defence on behalf of the Government of Canada, with performance required across Canada. Responses must be submitted by August 12, 2026, following a posting date of July 29, 2026, and are accessible through the CanadaBuys platform for eligible service providers seeking to fulfill this technical requirement.

General Info

Accredited calibration of Fluke 5560A/2G per ISO/IEC 17025, 90-day certificates, Canada-wide, DND contract, bids due August 12, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 07:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Accredited calibration services for Fluke 5560A/2G calibrators with issuance of ISO/IEC 17025-compliant certificates traceable to NRC, valid within 90 days of delivery.

Similar Contracts

Same NAICS industry code

Rafferty Main Dam, Gardiner Dam, and Grant Devine Dam Geotechnical Health Monitoring Upgrades

Solicitation # 2026-27-0045

The Water Security Agency is seeking to upgrade the geotechnical health monitoring systems at Rafferty Dam, Gardiner Dam, and Grant Devine Dam to ensure the continued safety and performance of these critical infrastructure assets. The work involves evaluating the existing instrumentation network, decommissioning non-functional sensors, replacing faulty or outdated equipment, and addressing instruments that are producing inaccurate or alarming data. The goal is to restore reliable, real-time monitoring capabilities that support ongoing assessments of dam integrity, enabling proactive management of geotechnical risks and informing future operational and maintenance decisions. All improvements will align with the agency’s mandate to safeguard public safety and infrastructure under its stewardship. The solicitation, identified as 2026-27-0045, was posted on July 30, 2026, with responses due by August 18, 2026. It is open to qualified contractors and falls under the jurisdiction of the Water Security Agency, a Saskatchewan Crown corporation vested with responsibility for water resource management across the province. All work must be performed within Saskatchewan, and inquiries should be directed to Enrique Aldana, P.Eng., the primary point of contact, via tendersubmissions@wsask.ca. The project reflects WSA’s broader commitment to maintaining the long-term reliability of its dam systems and ensuring compliance with provincial safety and environmental standards.

Water Security Agency

POSTED

about 10 hours ago

DEADLINE

B--Notice of Intent to Sole Source Otolith Analysis

Solicitation # DOIFFBO260154

The United States Fish and Wildlife Service plans to award a sole source firm fixed price commercial services contract to the Washington State Department of Fish and Wildlife for highly specialized otolith and scale analysis services critical to studying the life history of ESA-listed spring Chinook Salmon in the Entiat and Columbia River basins. The contractor will process and analyze up to 400 adult Entiat summer Chinook otoliths using Laser Ablation Inductively Coupled Plasma Mass Spectrometry and related techniques, alongside paired scale and otolith examinations to determine juvenile residency patterns, migration timing, growth rates, and rearing locations. This procurement falls under the simplified acquisition threshold and is being conducted under FAR 6.302-1 due to the unique and specialized nature of the required services, with only one known responsible source currently capable of fulfilling the technical requirements. Although this notice is not a solicitation for proposals or quotations, any responsible entity believing it can meet the specified technical needs may submit a capability statement to Contracting Officer Oscar Orozco by August 10, 2026, at 8:00 AM Pacific Time. The submission will be used solely to assess whether a competitive procurement is warranted, and the opportunity is limited to organizations possessing the precise scientific expertise required. The contract will be administered under NAICS code 541380, and all official correspondence should be directed to the designated point of contact provided, with the place of performance and agency office located in Falls Church, Virginia.

POSTED

about 19 hours ago

DEADLINE

Notice of Intent to Award / Sole Source to Arizona Department of Human Services

Solicitation # IHS1527448

The Navajo Area Indian Health Service, through the Chinle Comprehensive Health Care Facility, intends to award a sole-source purchase order to the Arizona Department of Human Services for state-mandated newborn screening services. The contract will be non-competitive, as the Arizona Department of Human Services is the only authorized entity in the state capable of providing these services without disrupting patient care. The services must be performed in full compliance with the attached Statement of Work, and the anticipated contract term includes a one-year base period with the option to extend for an additional year. The procurement is classified under NAICS code 541380, with a small business size standard of $19 million in annual receipts. This notice is not a solicitation for bids or proposals, and no competitive process is planned unless compelling evidence is submitted demonstrating that competition would benefit the government. Responses must be received by August 14, 2026, and failure to respond will result in the contract being issued without further notice. The government is under no obligation to acknowledge or provide feedback on submissions, and no proprietary, confidential, or classified information should be included. Any technical information submitted that is non-proprietary may be used in future solicitations, which, if initiated, will be publicly announced through Federal Business Opportunities. The point of contact for inquiries is Tanya Begay, and the contract will be performed at the Chinle Comprehensive Health Care Facility in Arizona.

Navajo Area Indian Health Svc

POSTED

about 19 hours ago

DEADLINE

Environmental Analytical and Regulatory Compliance Services

Solicitation # FA6648-19

This contract solicitation, FA664826Q0006, seeks environmental analytical and regulatory compliance services for Homestead Air Reserve Base in Florida under a 100% Total Small Business Set-Aside with a NAICS code of 541380. The Government intends to award up to three Firm-Fixed-Price Blanket Purchase Agreements (BPAs) with a five-year ordering period from July 2026 through July 2031, each with a master limit of $350,000 and per-order limits not exceeding $10,000. Offerors must provide comprehensive services including field sampling, laboratory analysis, QA/QC reporting, and regulatory compliance for liquid and solid environmental matrices, adhering to EPA, FDEP, and RCRA standards. Key analytical requirements include RCRA 14 metals for solid waste, specific VOC and PAH methods, and compliance with the Service Contract Labor Standards as defined by the attached Wage Determination 2015-4543. All labor rates must be fully burdened, inclusive of all direct and indirect costs, and must meet or exceed the prevailing wage rates established for Miami-Dade County. Laboratories must be NELAP-certified with valid scopes of accreditation, and subcontractors are permissible only if the prime retains full responsibility and provides commitment letters along with certification copies. Quotations must be submitted by August 7, 2026, as two separate parts: a Technical Capability Package and a Priced Quote, with all submissions delivered via email and not exceeding 20MB per message. The Technical Capability Package must include proof of laboratory accreditation, FDEP compliance statements, QA/QC narratives (limited to two pages), resumes of key field personnel with active OSHA 40-hour HAZWOPER certifications and their certificate copies, equipment calibration plans, and supporting documentation. The Priced Quote requires a fully completed, firm-fixed-price list covering every line item for field services, lab analyses, materials, and ancillary costs—failure to price all items renders the offer nonresponsive. The evaluation follows a Lowest Price Technically Acceptable (LPTA) methodology, where Technical Acceptability and Past Performance are pass/fail gates determined using CPARS, SPRS, FAPIIS, and other government data; vendors without federal performance history receive a neutral rating, which is considered a pass. Offerors may acknowledge all amendments using a single form listing

FA6648 482 Lss Lgc

POSTED

about 19 hours ago

DEADLINE

Bacteriological Water Testing and Analysis Services

Solicitation # 0000039920

The State of California is seeking qualified contractors to provide bacteriological water testing and analysis services for raw and treated water under solicitation number 0000039920, with a submission deadline of September 3, 2026, at 3:00 PM. Contractors must hold current accreditation from the State Water Resources Control Board’s Environmental Laboratory Accreditation Program or an equivalent certification under the National Environmental Laboratory Accreditation Program, and must maintain a valid California business license. All testing must be conducted at the contractor’s own facility to ensure compliance with sample holding time requirements, and the facility must be located within a 65-mile radius of West Sacramento, the designated place of performance. While the contract is open to qualified vendors, interested parties are advised to register on the State of California’s official procurement portal to participate, as biddingo.com provides only informational guidance and is not affiliated with the state’s procurement process. All formal inquiries regarding the bid’s content or requirements should be directed to the agency’s point of contact.

State of California

POSTED

DEADLINE

in about 1 month

TOS No. 20-166A - Slauson Connect Business Incubator and Work Resource Center - Construction Phase

Solicitation # 231034

The City of Los Angeles is soliciting consultant services for the construction phase of the Slauson Connect Business Incubator and Work Resource Center under Tender #231034, with a submission deadline of August 14, 2026, at 3:00 PM. The Bureau of Engineering’s Geotechnical Engineering Division is seeking a qualified firm to provide comprehensive geotechnical support including review of plans and reports, on-site observations and testing during construction conducted by a Deputy Grading Inspector or Field Technician, laboratory testing of soil samples, and the preparation of two compaction reports. All work is to be performed at the project site in Los Angeles, CA 90012, and the consultant must ensure compliance with municipal standards for geotechnical integrity during grading and construction activities. Bidders are responsible for registering on the City of Los Angeles’s official procurement portal to participate, and all inquiries regarding the bid’s language, requirements, or inaccuracies must be directed to the originating department contact, Easton Forcier. The solicitation does not specify a set-aside classification or NAICS code, and interested parties should verify eligibility and procedural details directly through the City’s systems. While bidding information is accessible via a third-party link, the City of Los Angeles is the sole authoritative source for official documents, and bidders assume all risk associated with using external websites for bid-related data.

City of Los Angeles

POSTED

DEADLINE

Chemical Residue and Allergen Testing in and on Food Products for Canadian Food Inspection Agency (CFIA)

Solicitation # WS5434478581

This solicitation, WS5434478581, seeks analytical and laboratory services to test for chemical contaminants and allergens in food products, food crops, and animal tissues for the Canadian Food Inspection Agency. All submissions must be completed by 2 p.m. EST on September 9, 2026; any bid received after this time will be deemed non-responsive, overriding earlier deadlines noted in external postings. The requirement is structured into two parts: Part A organizes services by seven food groups—Dairy, Eggs, Fish & Seafood, Fresh Fruit & Vegetables, Honey, Meat, and Processed Products—and Part B covers 24 specific testing programs including 3-MCPD, Arsenic, BPA, Alternaria, and Benzopyrene. Offerors may submit bids for one or multiple food groups and/or testing programs, and successful bidders may receive a single consolidated contract covering multiple areas. Only registered users with approved Government of Canada profiles and active SAP Ariba accounts can access and download full submission materials. The solicitation falls under NAICS code 541380 and is managed by the Department of Public Works and Government Services under the Government of Canada, with Sebastien Dupuis listed as the primary contracting authority for inquiries.

Department of Public Works and Government Services

POSTED

DEADLINE

in about 1 month

Safety and Site Supervision ServicesThe contract requires the provision of comprehensive safety and site supervision services centered around daily tailgate safety meetings, completion of Job Site Safety Hazard Analyses, and thorough safety recordkeeping to maintain compliance with both OSHA and Cal/OSHA regulations. These activities are essential to ensuring a safe working environment and are to be performed at the specified job site located in Calipatria, California, with a ZIP code of 92233. The work is classified under NAICS code 541380 and is structured as a subcontract, indicating it supports a larger project or program managed by the Imperial Irrigation District. Interested parties must submit responses by the deadline of August 5, 2026, and the solicitation was posted on July 29, 2026, with all details available through the provided online portal.

Imperial Irrigation District

POSTED

DEADLINE

Military Packaging System Design and ValidationThe contract seeks the design and validation of packaging systems capable of withstanding Distribution Cycle 18 as defined by ASTM D4169 at Assurance Level II, specifically for the transport of sensitive equipment. This effort requires the development of robust, militarily compliant packaging solutions that simulate the full range of environmental and handling stresses encountered during military logistics, including vibration, impact, temperature extremes, and humidity. The packaging must be engineered to protect mission-critical equipment throughout the supply chain, ensuring operational readiness upon delivery. Compliance with ASTM D4169 Cycle 18 and Assurance Level II standards is mandatory, demanding rigorous testing protocols and documentation to verify performance under real-world conditions. This is a small business set-aside subcontract under NAICS code 541380, reserved exclusively for small businesses as defined by the SBA. The solicitation, posted by the Strategic Acquisition Program Directorate within the Department of Defense, has a response deadline of August 13, 2026, and is issued through the DIBBS platform. Participants must be prepared to deliver fully validated packaging designs with supporting test data, and the work is expected to align with defense logistics standards without designated place of performance constraints. The nature of the contract requires technical expertise in packaging engineering, materials science, and military transport requirements, with an emphasis on innovation, reliability, and adherence to exacting performance benchmarks.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires strict adherence to OSHA, DLA, and Department of Defense standards for the proper labeling, packaging, and documentation of hazardous and radioactive materials scheduled for shipment. All processes must ensure full regulatory compliance to guarantee operational safety, transportation integrity, and legal accountability throughout the supply chain. The work is classified as a subcontract under NAICS code 541380 and is sponsored by the Department of Defense through the Land Supply Chain agency, with performance expected to align with federal defense logistics requirements. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, providing a narrow window for qualified vendors to submit proposals. While no specific location is designated for performance, the scope implies nationwide or theater-wide support to DoD operations. Participation demands proven expertise in handling regulated materials, precise documentation systems, and familiarity with military logistics protocols. There is no set-aside designation specified, meaning all eligible entities may compete, but success hinges on demonstrable compliance history and technical rigor in hazardous materials management.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection and Compliance Verification (Pre-Delivery)A pre-delivery quality inspection contract has been issued under the MARITIME SUPPLY CHAIN branch of the Department of Defense to ensure full compliance with MIL-STD-1916 standards and the requirement for zero non-conformances on critical attributes. The inspection must be performed independently prior to delivery and is focused on verifying that all components and systems meet stringent military quality thresholds, with no tolerance for defects in key performance or safety-related features. The work is to be conducted at the place of performance in Groton, Connecticut, with a zip code of 06349-5300, and must be completed in accordance with the technical and procedural requirements set forth for this high-stakes verification process. This subcontract,classified under NAICS code 541380, was posted on July 29, 2026, with a firm deadline for responses on August 10, 2026. The solicitation is open to qualified subcontractors capable of delivering rigorous, objective, and documented inspection outcomes that align with DoD quality expectations. There is no set-aside designation, meaning the opportunity is open to all eligible entities, and the point of contact information is not provided in the posting. Interested parties must review the full requirements via the provided DIBBS link and ensure their capabilities meet the zero-defect mandate for critical attributes, as failure to comply will result in rejection of the deliverables and potential disqualification.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Fluid Filter Components Kit (Parts, Gauge & Filter Element)

Solicitation # W8482-275468/A

The Department of National Defence is seeking bids for a procurement of fluid filter components including parts kits, pressure gauges, and fluid filter elements, with all items sourced from BOSCH REXROTH AG under specific part numbers and NCAGE codes. The requirement includes 15 parts kits and six pressure gauges to be delivered to CFB Halifax, along with 10 parts kits, four pressure gauges, and 33 fluid filter elements to CFB Esquimalt, with additional filter elements totaling 17 units at Halifax. All deliveries must be made on a Delivery Duty Paid basis, ensuring all costs and responsibilities are assumed by the supplier until receipt at the designated military bases. The solicitation, identified as W8482-275468/A, opens on July 30, 2026, with responses due by August 18, 2026, and requires submission of mandatory forms in both Excel and PDF formats, including an Offeror Submission Details document, a Submission Form, and a Declaration Form. Suppliers proposing equivalent or substitute products must clearly identify the brand, model, part number, and NCAGE of their alternatives. The Crown reserves the right to negotiate with any supplier, and all bids must be submitted in either English or French. Further details and conditions are outlined in the Statement of Requirements annex, and bidders are bound by all terms upon submission.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Two (2) quantities of Ballistic Plasticine Oven

Solicitation # W8486-270930/A

The Department of National Defence is seeking two Ballistic Plasticine Ovens under Supply Arrangement E60PV-19EQUI, which is reserved exclusively for pre-qualified suppliers of laboratory and scientific equipment, parts, accessories, services, and supplies. Bids are only accepted from vendors already holding this supply arrangement, and any proposals from non-qualified suppliers will not be evaluated. The procurement follows a lowest priced responsive proposal strategy under the Canadian Free Trade Agreement and the Canada–Korea Free Trade Agreement, with the solicitation published on CanadaBuys (SAP Ariba) for 40 calendar days and open for bids for a minimum of 15 calendar days. The equipment must be delivered to Edifice 239, local 107, 2459 route de la Bravoure (COTÉ SUD), Québec, QC, G3J 1X5 within eight weeks of contract award. The technical specifications are mandatory and comprehensive: the oven must operate on a 208V to 400V, 3-phase, 50/60 Hz power supply and not exceed dimensions of 1.3m width, 1.2m depth, and 1.8m height. It must maintain a working temperature range from ambient +10°C to at least 300°C, with temperature setpoint adjustments from +20°C to +300°C and resolution of ≤0.1°C below 100°C and ≤0.5°C at or above 100°C. The oven requires two independent Pt100 Class A or better temperature sensors in redundant configuration, an adaptive PID control system with adjustable heating distribution and airflow, and a feature that delays process timing until the setpoint is reached. Internal dimensions must provide a volume between 1000L and 1100L with internal width ≥1000mm, height ≥1100mm, and depth ≥800mm. The chamber must be constructed of corrosion-resistant stainless steel with all internal components made of similar material. It must include forced air circulation via at least two circulating units with adjustable airflow, programmable temperature profiles, over- and under-temperature safety protections, and a minimum chamber load capacity of 290 kg. Only suppliers meeting all technical criteria with the lowest aggregated price will be recommended for award.

Industrial Process Furnace and Oven Manufacturing

POSTED

DEADLINE

CIRCUIT BREAKERS

Solicitation # W8482-264981/A

The Department of National Defence is soliciting bids for 80 circuit breakers, model 3RV2041-MA10, manufactured by SIEMENS ENERGY GLOBAL GMBH & CO. KG, with an NCAGE code of D1149, to be delivered in equal quantities of 40 units each to CFB Halifax and CFB Esquimalt. Bidders may propose equivalent or substitute products but must clearly identify the brand, model, and NCAGE of the alternative offering. The solicitation, identified as W8482-264981/A and posted on July 30, 2026, with a response deadline of August 10, 2026, follows a Lowest Price Technically Acceptable (LPTA) evaluation methodology, where technical compliance is mandatory and price is the sole differentiator among qualified offers. All proposals must meet strict packaging, preservation, and labeling standards, including compliance with Canadian Forces Packaging Specification D-LM-008-001/SF-001 for Canadian contractors, MIL-STD-2073 and MIL-STD-129 for U.S.-based contractors, and NATO TL8100-0100 for EU-bound shipments. Items must be marked with manufacturer name, part number, date of manufacture, expiration date, and serial number where applicable, and packaged on standard 48 x 40 inch pallets with a maximum height of 47 inches. Barcoding must follow the UCC/EAN-128 standard using Application Identifiers 241 for PSCN and 7001 for NSN, with human-readable interpretation below each barcode. Products must retain at least 75% of their shelf life upon delivery, and all shipments must adhere to DDP terms, meaning the contractor bears all costs and risks until delivery at the destination. Invoicing must be directed to the appropriate payee based on delivery location, with payments processed via direct deposit or wire transfer. Contractors must comply with international sanctions, mandatory quality assurance reporting, and controlled goods program requirements where applicable, and must obtain prior written consent prior to subcontracting. The contract includes clauses covering performance, delivery, inspection and acceptance, payment, warranties, insurance, confidentiality, data protection, audit rights, intellectual property, and termination. No security clearance is required, no key personnel are designated, and no contract options exist. All documentation may be

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

UPS APC BATTERY REPLACEMENT

Solicitation # W6369-27-X001/A

The Department of National Defence, acting on behalf of Defence Research and Development Canada, is seeking a contractor to perform a comprehensive battery replacement service for an APC Uninterruptible Power Supply system located at the DRDC Ottawa Research Centre. The scope of work includes supply, delivery, installation, configuration, and testing of eight SYBT4 battery modules specifically designed for the APC UPS model STCF40KF with serial number PD0810360116, alongside the safe removal and environmentally compliant disposal of the existing batteries. Strict compatibility requirements mandate that only the specified battery modules are acceptable; no substitute or equivalent products will be considered under any circumstances. The contract solicitation, identified as W6369-27-X001/A, was posted on July 30, 2026, with a deadline for responses set for August 6, 2026. Performance of all services is required at the National Capital Region in Canada, and the contracting authority is Tatyana Vasilchuk, who can be reached via email for inquiries. The work must ensure seamless integration and full operational verification of the UPS system post-installation to maintain uninterrupted power support for critical IT infrastructure, emphasizing precision, compliance, and adherence to environmental regulations throughout the entire process.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

NFS(Pacific) Seating

Solicitation # W0103-19103199

This procurement under Solicitation Number W0103-19103199 is issued under Supply Arrangement E60PQ-120001/H for rotary chairs and rotary stools to be delivered and installed at CFB Esquimalt in Victoria, British Columbia, with a mandatory delivery deadline of October 31, 2026. Only pre-qualified suppliers holding the existing Supply Arrangement are eligible to bid directly; non-SA holders may submit bids but must simultaneously apply for the Supply Arrangement, with no contract award possible until that arrangement is formally granted, and Canada is under no obligation to delay award pending such evaluation. The requirement is for office seating including student chairs and tables, teacher desks and chairs, filing cabinets, storage cabinets, bookshelves, and whiteboards, with all deliveries governed by DDP Incoterms 2020 to the Naden Building NAD092, meaning the contractor bears all costs and risks up to and including unloading at the destination. Evaluation follows a Lowest Price Technically Acceptable methodology, where offers must first meet all mandatory technical criteria—including compliance with ANSI/BIFMA e3 Level 2 standards, use of recyclable plastics, and Canadian content certification—and the lowest-priced compliant offer will be selected without trade-offs between price and technical merit. Packaging must adhere to ISO 21067-1:2016 and Canadian environmental policies, requiring reusable, returnable, or recyclable materials with exceptions only for packaging tape and specialized safety packaging, and all shipments must include a detailed packing slip with contract and purchase identifiers. The contract period extends to October 31, 2027, with an option for the Government to acquire additional items at the same pricing within 12 months of award. All offers must include signed certifications confirming product conformance, environmental compliance, absence of forced labor, adherence to international sanctions, and truthful representations. The contracting authority is Ila Jordan, with no security clearance required and no key personnel specifications. Invoices must reference the CRN and PBN, supported by financial records retained for seven years, and must be submitted electronically to the designated email without reliance on standardized invoicing platforms. Proposal submissions must be separated into technical and financial components, submitted via email by the August 7, 2026 deadline, and must not violate procurement integrity through affiliated bidding or misleading declarations.

Institutional Furniture Manufacturing

POSTED

DEADLINE

TBIPS - G.1. Geomatics Analyst – Level 2

Solicitation # W6369-26-X056

The Department of National Defence is seeking three Geomatics Analysts – Level 2 to support the Mapping and Charting Establishment’s Engineering Section within the National Capital Region. These analysts will work under the direction of MCE Engineering staff to develop and sustain critical geomatics engineering capabilities, IT infrastructure, and production workflows essential to Royal Canadian Air Force operations. Their responsibilities include creating, assessing, and manipulating aeronautical and geospatial data, developing and evaluating new datasets and applications, generating digital aeronautical charts and specialized products that meet RCAF Operational Airworthiness requirements, and providing direct geomatics support to various RCAF Project Management Offices. The work is integral to the advancement of key programs such as CMLU and MHP, ensuring the sustained operational readiness and mission effectiveness of Canadian air forces. The solicitation, identified as TBIPS - G.1. Geomatics Analyst – Level 2 with reference number W6369-26-X056, was posted on July 30, 2026, with a response deadline of August 17, 2026. This contract opportunity is open under the federal government’s procurement framework with no specified set-aside status. All work is to be performed in the National Capital Region and the primary point of contact for inquiries is Samer Fattouch, Contracting Authority, reachable via email at Samer.Fattouch@forces.gc.ca. Interested parties must submit their proposals through the Canada Buys portal prior to the deadline.

Geophysical Surveying and Mapping Services

POSTED

DEADLINE

CFB Esquimalt Mobile Lifts

Solicitation # W0103-260105-001

An administrative error caused the solicitation for a 6-column mobile lift system to close prematurely on Monday, June 1st, despite the official response deadline being August 5th, 2026. The Department of National Defence requires the purchase, delivery, and installation of the system at CFB Esquimalt in Victoria, British Columbia, with completion mandated by July 31st, 2026. No security clearance is required for this procurement. All submissions must be in one of Canada’s official languages, and the Crown reserves the right to engage in negotiations with any supplier. WestVac Industrial Ltd. was selected as the successful vendor. Inquiries should be directed to Contracting Authority Samantha Phelan at the provided email and phone number, and the official solicitation number is W0103-260105-001.

Elevator and Moving Stairway Manufacturing

POSTED

DEADLINE

RFP- Digital Firefighting Equipment W0103-18944414 Solicitation

Solicitation # W0103-18944414

The Department of National Defence, through CFB Esquimalt’s Naval Training Group (Pacific), is soliciting digital firefighting equipment to enhance training capacity at containerized Damage Control Training Facilities under the Royal Canadian Navy’s Naval Environment Training Program. The procurement, identified by solicitation number W0103-18944414, requires the supply and delivery of specialized systems including multi-panel digital fire simulators, Portable Fire Extinguisher Trainers, smoke generators, and integrated scenario control systems, with all deliverables due no later than 9 November 2026. The contract is structured under a Lowest Price Technically Acceptable model, with technical compliance being mandatory and award based solely on the lowest evaluated price among compliant offers. All equipment must support realistic, deployable, and modernized firefighting training without requiring permanent facility modifications, and must comply with mandatory technical specifications outlined in Annex A and the Contract Security Program, including adherence to the Security Requirements Check List and Supplemental Security and Classification Guide. Performance is governed by a firm-fixed-price structure with delivery terms defined under Delivered Duty Paid (DDP) Incoterms® 2020, meaning the contractor assumes all costs and risks until delivery at designated RCN locations, primarily centered at CFB Esquimalt in Victoria, British Columbia. Contract administration requires electronic invoicing through the Sourcing and Procurement Division at 17000 STN Forces, Victoria, BC, with payments processed via direct deposit or wire transfer. Security requirements are strict: the contractor must hold an active Designated Organization Screening from Public Works and Government Services Canada, and all personnel accessing sites must possess RELIABILITY STATUS clearances. Subcontracts involving security-sensitive work require prior written approval. Environmental standards mandate reusable, returnable, or recyclable packaging, with exemptions only for hazardous material handling or temperature-controlled transport needs. The contractor is also bound by anti-forced labor provisions, international sanctions compliance, and prohibitions on contingency fees or third-party inducements. Invoices must include the Contract Reference Number, Procurement Business Number, and applicable financial codes. No U.S. military standards such as MIL-STD-129 or MIL-STD-2073 apply; Canadian procurement policies and documentation procedures govern all aspects of the contract. The offeror must submit certifications confirming eligibility under the Federal Contractors Program for Employment Equity and compliance with Canada’s Procurement Code of Conduct, with failure to certify triggering mandatory submission of an Integrity Declaration Form.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Solicitation # W0127-26-P016

The Department of National Defence is soliciting bids for the procurement of 200 institutional-grade mattresses—100 twin size and 100 queen size—to support lodging at CFB Edmonton, with delivery required no later than 1 September 2026. Only Canadian suppliers, as defined in the solicitation’s annex, are eligible to bid; offers from non-trading partner nations will be rejected. Each mattress must be new, unused, and meet strict technical specifications including a minimum 8-inch thickness, medium to medium-firm firmness, reinforced edges, a 250 lb weight capacity, stain-resistant and removable cover, compliance with Canadian fire safety standards, and a minimum five-year manufacturer warranty. All bids must include documentation demonstrating compliance with these mandatory criteria; failure to meet any requirement renders the offer non-responsive. The procurement follows a best-value trade-off approach, considering both technical acceptability and price, though no specific weighting or rating scale is disclosed. Packaging must adhere to ISO 21067-1:2016 standards, with contractors responsible for ensuring secure, protective containment during transport, though no specific materials, dimensions, or labeling requirements are detailed. Preservation methods, marking, and barcoding are not specified. Delivery is to be made to CFB Edmonton, with acceptance performed upon arrival. Payment will be processed by the Receiver General for Canada via electronic methods such as Direct Deposit or Wire Transfer, and invoicing may be submitted electronically via EDI, though no specific platforms like WAWF or IPP are required. Proposals must be submitted through the Government Electronic Tendering Service by 17:00 Eastern Time on 17 August 2026, using the required annexes for Offer Submission and Offeror Certification. Bidders must certify compliance with the Federal Contractors Program for Employment Equity and disclose any disqualifying integrity issues via the Integrity Declaration Form. No security clearances, key personnel, contract options, or OCI provisions apply. The contract is inferred to be fixed-price, with pricing submitted by offerors in the absence of any stated budget or estimated value.

Mattress Manufacturing

POSTED

DEADLINE

CONNECTOR,RECEPTACLE,ELECTRICAL

Solicitation # W8482-275423/A

The Department of National Defence is soliciting bids for two identical electrical connector receptacles, part number A253991, with NCAGE code 16998, J.B. NOTTINGHAM & CO INC, under solicitation W8482-275423/A. Each item is required in a quantity of ten units, to be delivered Delivery Duty Paid to CFB Halifax and CFB Esquimalt respectively. The solicitation closes on August 12, 2026, and offers must be submitted through CPC Connect, with fax and hard copy as alternative methods; email and unauthorized platforms are prohibited. All submissions must include the original Excel and PDF versions of the Offeror Submission Details, along with the Offeror Submission Form and Offeror Declaration Form in PDF, and bidders proposing substitute products must fully identify the alternative brand, model, and NCAGE. The contract is evaluated on a Lowest Price Technically Acceptable basis, requiring full compliance with all technical and regulatory requirements, including adherence to Canadian supplier status and Canadian Content thresholds. Non-compliance with mandatory criteria, such as integrity, financial standing, or prior performance, results in automatic rejection. Deliverables must strictly conform to Canadian military packaging and marking standards detailed in specifications such as D-LM-008-001/SF-001 for preservation, D-LM-008-008/009/010/SF-000 for electronic parts and assemblies, and D-LM-008-036/SF-000 for general packaging. Packaging must meet NATO TL8100-0100 standards for EU-based suppliers and MIL-STD-2073 for U.S. contractors. All items must be labeled with mandatory information including specification number, manufacturer, manufacture and expiration dates, and serial numbers where applicable. Barcoding must use UCC/EAN-128 symbology with Application Identifiers 241 (PSCN) and 7001 (NSN), and must remain legible for the item’s full life cycle. Hazardous materials require compliance with the Transportation of Dangerous Goods Act and Hazardous Products Act, including bilingual Safety Data Sheets and correct labeling. The Contractor must maintain a quality system consistent with ISO 9001:2015, comply with the Controlled Goods Program, Canadian economic sanctions, and anti-forced labor requirements, and

Electronic Connector Manufacturing

POSTED

DEADLINE

Packaging, Labeling, and Barcoding ServicesThe contract requires the provision of military-compliant packaging, labeling, and UCC/EAN-128 barcoding services for naval spare parts in accordance with Canadian and NATO standards. All work must align with strict defense logistics requirements to ensure traceability, durability, and interoperability across military supply chains. The services are critical to supporting the operational readiness of naval assets through standardized identification and handling procedures. This subcontract is issued by the Department of National Defence under the Government of Canada and is open for bids with a response deadline of September 28, 2026. The primary place of performance is in British Columbia and Nova Scotia, indicating the work may involve multiple locations within these provinces. The NAICS code 561910 classifies the service under Other Support Activities for Transportation, underscoring its role in logistics and supply chain support. Bidders must demonstrate compliance with federal and allied military specifications to qualify for award.

Packaging and Labeling Services

POSTED

DEADLINE

in about 2 months

Technical Documentation and Equivalence CertificationThe contract requires the preparation and submission of technical equivalence documentation for non-original equipment manufacturer spare parts to demonstrate conformity with Canadian military standards. This involves providing detailed technical data, testing results, and certification evidence that prove the non-OEM parts meet or exceed the performance, safety, and durability requirements mandated by the Department of National Defence. The work must be completed and submitted before the response deadline of September 28, 2026, and is classified as a subcontract under the NAICS code 541330, indicating it relates to engineering services. Performance of the contract is expected to support military operations across British Columbia and Nova Scotia, where the spare parts will be deployed or utilized. The government of Canada, through the Department of National Defence, is seeking qualified subcontractors capable of delivering rigorous technical validation to ensure interoperability and reliability of non-OEM components within Canadian military systems. While no specific point of contact or set-aside designation is provided, bidders must ensure all submissions fully align with Canadian defense specifications and are structured to withstand formal technical review and audit.

Engineering Services

POSTED

DEADLINE

in about 2 months