Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

J--Manual Contract Awarded to Rockwell Collins, Inc (Cage Code 13499)

Active
N0038313M050DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of ten display units, identified by NSN 7R H 7025 012568624 and part number 209-371-006-103. Only sources previously approved by the government for supplying these specific items are being solicited, emphasizing strict adherence to established approvals. If a potential supplier is not an approved source, they must submit detailed technical data and documentation as outlined in the U.S. Navy Aviation Supply Office's Source Approval Information Brochure, which addresses the supplier's experience with similar items or the production of this particular unit. Failure to submit the complete required documentation or proof of an ongoing approval evaluation will result in the offer not being considered. Awards under this solicitation will prioritize meeting the government's timing requirements, meaning that if source approval cannot be completed timely or the approval process prevents procurement within the needed timeframe, the government reserves the right to award based on fleet support needs. The contract was manually awarded to Rockwell Collins, Inc., under solicitation number N0038313M050D, managed by the Navsup Weapon Systems Support office, part of the Department of Defense, with operations based in Philadelphia, PA. This structured approach ensures the government's operational requirements are met without delay while maintaining strict quality and source verification standards.

General Info

Procurement of ten government-approved display units awarded to Rockwell Collins, emphasizing source approval.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
ContactsNo contacts available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support
Office AddressPHILADELPHIA, PA, 19111-5098, USA
ContactsNo contact information available

Full Description

Show more
THE REQUIREMENT NSN 7R H 7025 012568624, PART NUMBER 209-371-006-103, DISPLAY UNIT, QUANTITY 10 EACH. ONLY THE SOURCE (S) PREVIOUSLY APPROVED BY THE GOVERNMENT FOR THESE ITEMS HAVE BEEN SOLICITED. THE TIME REQUIRED FOR APPROVAL OF A NEW SOURCE IS NORMALLY SUCH THAT AN AWARD CANNOTBE DELAYED PENDING APPROVAL OF A NEW SOURCE. IF YOU ARE NOT AN APPROVED SOURCE YOU MUST SUBMIT, TOGETHER WITH YOUR PROPOSAL, THE INFORMATION DETAILED IN THE HTTP://WWW.NECO.NAVY.MIL/SAR.CFM U.S NAVY AVIATION SUPPLY OFFICE SOURCE APPROVAL INFORMATION BROCHURE. THIS BROCHURE IDENTIFIES TECHNICAL DATA REQUIRED TO BE SUBMITTED BASED ON YOUR COMPANY’S EXPERIENCE IN THE PRODUCTION OF THE SAME OR SIMILAR, OR IF THIS ITEM IS AN ITEM YOU HAVE NEVER MADE. THIS BROCHURE CAN BE OBTAINED BY CALLING NAVSUP WSS-P AT +1 (555) 000-0000. IF YOUR REQUEST FOR SOURCE APPROVAL IS CURRENTLY BEING EVALUATED AT NAVSUP WSS SUBMIT WITH YOUR OFFER A COPY OF THE COVER LETTER WHICH FORWARDED YOUR REQUEST FOR SOURCE APPROVAL. OFFERS RECEIVED WHICH FAIL TO PROVIDE ALL DATA REQUIRED BY THE SOURCE APPROVAL BROCHURE OR DOCUMENT PREVIOUS SUBMISSION OF ALL DATA REQUIRED BY THE SOURCE APPROVAL BROCHURE WILL NOT BE CONSIDERED FOR AWARD UNDER THIS SOLICITATION. PLEASE NOTE, IF EVALUATION OF A SOURCE APPROVAL REQUEST SUBMITTED HEREUNDER CANNOT BE PROCESSED IN TIME AND/OR APPROVAL REQUIREMENTS PRECLUDE THE ABILITY TO OBTAIN SUBJECT ITEMS IN TIME TO MEET GOVERNEMNT REQUIREMENTS, AWARD OF THE SUBJECT REQUIREMENT MAY CONTINUE BASED ON FLEET SUPPORT NEEDS. THE NAVSUP WSS COMMERCIAL ITEM IDENTIFICATION BROCHURE IS NOW AVAILABLE AT: HTTP://NECO.NAVY.MIL/CIB.CFM.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
Federal
Automated Traffic Enforcement Trailer
Solicitation # W911S226U4411
Solicitation W911S226U4411 is a Total Small Business Set-Aside for the procurement of a complete, towable, autonomous mobile traffic enforcement trailer and laser-based measuring system for the Department of Defense at Fort McCoy, Wisconsin. The primary requirement is for one Automated Traffic Monitoring System Trailer, specifically the POLISCAN Speed FM1 or an approved equal, capable of tracking multiple vehicles across at least four adjacent traffic lanes to enforce speed limits and red-light violations. The contract includes a requirement for eight hours of on-site operator training at Fort McCoy and a minimum 12-month comprehensive manufacturer's warranty. All equipment must be new, and the system must be calibrated to federal and state standards to ensure data is legally admissible in court. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required F.O.B. Destination to Fort McCoy, with a preferred delivery window of 30 days. Offerors must submit their proposals via the PIEE Solicitation module, including technical, price, and past performance documentation. A critical requirement for responsiveness is the completion of Attachment 1 regarding certifications and the identification of the country of origin. The contract incorporates various regulatory clauses, including Buy American preferences, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on certain telecommunications equipment.
W6QM Micc-Ft Drum

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
Federal
66--INDICATOR,ATTITUDE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB18
This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a Request for Quotations for the repair, overhaul, upgrade, and inspection of 33 Attitude Indicators (NSN 6610-01-101-1927 LC, P/N 622-3374-002). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in operational environments. The contract includes an initial induction period of 365 calendar days, which the government may extend by an additional year. Offerors must provide option pricing for a maximum of 135 units over the total contract period. Award will be granted to the offeror with the lowest price technically acceptable quote, with past performance evaluated via the DoD Supplier Performance Risk System. The contractor is responsible for providing all labor, facilities, materials, and tooling, as government-furnished manufacturing aids are not provided. Key technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems and calibration standards such as ANSI/NCSL Z540.3 or ISO-10012-1. Specific prohibitions are in place regarding the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are FOB Destination with a 90-day delivery window, and all packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
Federal
58--THERMAL IMAGING SYS
Solicitation # N0010426RQA81
Solicitation N00104-26-R-QA81, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a firm fixed price negotiated procurement for the manufacture of Thermal Imaging Systems under NSN 5855-01-499-1240. The government is seeking a single award based on the most advantageous offer, with past performance weighted as more important than price. The evaluation process utilizes the DoD Supplier Performance Risk System for quality ratings, and the government reserves the right to award to other than the lowest priced offer. Proposals must be submitted via NECO or email, and the current requested delivery date is 180 days after award. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073. Inspection and acceptance are conducted at the origin, with the contractor remaining responsible for all inspection requirements and maintaining records for 365 days post-delivery. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, compliance with Buy American and Balance of Payments program certificates, and adherence to cybersecurity standards for covered defense information. Offerors must be authorized distributors of the original manufacturer to be considered for award.
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334511
New
Federal
66--PROCESSOR,FLIGHT IN, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBB19
Solicitation N0038326QBB19, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of Flight Processors (NSN 6610-01-622-1414). The contract covers a maximum of 30 units over a potential two-year period, with a delivery requirement of 90 days and FOB Destination terms. Award will be based on Lowest Price Technically Acceptable criteria, though past performance is noted as more important than price. Because the item is flight critical, government source approval is mandatory prior to award. The contractor is responsible for providing all labor, materials, and tooling necessary to return units to Ready For Issue condition, as the government will not provide manufacturing aids. Strict quality standards are mandated, including compliance with ISO 9001 or SAE AS9100 and calibration standards such as ANSI/NCSL Z540.3. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contractor must maintain comprehensive quality control documentation and historical record files for each serial number, with formal Material Review Board authority for as-is dispositions retained by the government.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in 21 days
View Details
NAICS: 334511
New
Federal
58--THERMAL IMAGING SYS, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RQA79
Solicitation N0010426RQA79, issued by NAVSUP Weapon Systems Support Mechanicsburg, is an unrestricted negotiated request for proposal for the teardown, evaluation, repair, and modification of 41 Thermal Imaging Systems (NSN 5855-01-499-1240). The government contemplates the award of a firm-fixed-price contract with a requested delivery date of 180 days after award. All repair work must adhere to contractor standard practices and approved technical directives, with physical identification required per MIL-STD-130 and packaging conducted according to MIL-STD-2073. The contractor is responsible for all inspection and testing at the point of origin, maintaining records for 365 days post-delivery. Any critical or major design or material variances must be submitted via DCMA or SUSHPIP and approved through a formal contract modification. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. Offerors must be authorized distributors of the original manufacturer and comply with various federal and defense acquisition regulations, including cybersecurity requirements for covered defense information and Buy American certifications.
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334511
New
SLED
NERC Compliant Battery Monitoring SystemThis subcontract involves the supply and configuration of battery monitoring systems for prime contractors working on Dalton Utilities energy facility projects in Georgia. The scope of work includes providing monitoring sensors, data acquisition hardware, and specialized software designed to track battery health and performance. A critical requirement of the delivery is that the functional system must maintain full compliance with NERC PRC-005-06 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 334511, the contract focuses on the delivery of a fully operational Battery Monitoring System to ensure the reliability and safety of the utility's energy infrastructure.
Dalton Utilities

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334511
New
DIBBS
Searchlight Unit Supplier (NSN 6230123124633)This subcontract involves the supply of three specialized searchlight units for prime contractors delivering to the Defense Logistics Agency. The hardware must strictly adhere to NSN 6230123124633 and the DLA Master List of Technical and Quality Requirements RA001. A critical manufacturing constraint is that the parts must not be produced using additive manufacturing processes. Eligible suppliers are required to maintain a valid UEI and CAGE code. The project falls under NAICS code 334511 and is associated with the Department of Defense. The response deadline for this requirement is November 9, 2026, with the place of performance located at FPO 09573.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Supply of Display Units (NSN 7025-01-686-3479)This HUBZone set-aside subcontract involves the procurement of 21 new, unused, and non-refurbished display units under NSN 7025-01-686-3479 for prime contractors supporting DLA Troop Support. The Department of Defense requires genuine OEM materials sourced through authorized distributors, with a strict prohibition against the use of additive manufacturing for production. Deliverables must be shipped FOB Origin to Tracy, California, and must adhere to specific packaging and marking standards, including ASTM D3951, RP001, and MIL-STD-129. The opportunity is categorized under NAICS code 334511, with a response deadline of November 9, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Electrical Sub-Assembly and IntegrationThis subcontract for Electrical Sub-Assembly and Integration involves the supply and integration of electrical components for prime contractors supporting DLA aviation lighting projects. The scope of work includes soldering, wiring harness assembly, and the installation of light sources and lenses into housings in strict accordance with Reference Drawing 78286 SS3995. The final deliverables are fully wired and assembled light units that must comply with MIL-STD-129 standards for marking and labeling. Managed by the Department of Defense through the Jacksonville Building, the project falls under NAICS code 334511 and will be performed in Jacksonville, Florida. Interested parties must note the response deadline of November 9, 2026, for this specific procurement effort.
JACKSONVILLE BLDG

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Supply of Navigational Lights (NSN 6220-01-568-5419)This subcontract involves the manufacture or sourcing of three navigational light assemblies, identified by NSN 6220-01-568-5419, to support prime contractors fulfilling DLA supply contracts. The project falls under NAICS code 334511 and is managed by the Department of Defense through DLA DIST San Joaquin, with the place of performance located in Tracy, California. The contractor is responsible for ensuring all units are packaged and labeled according to strict military and industry standards, including ASTM D3951 for non-hazardous materials, TQ Requirement IP025 and FED-STD-313 for hazardous materials, and MIL-STD-129 for shipment labeling. Additionally, the provider must maintain full compliance with the Buy American Act to successfully deliver the three required units.
DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Aircraft Landing Light Supplier (NSN 6220016458829)This subcontract through Depot Hill for the Department of Defense requires the manufacture or sourcing of four aircraft landing light assemblies under NSN 6220016458829. The supplier is responsible for ensuring all units meet strict aviation lighting quality control standards and adhere to packaging requirements specified by MIL-STD-129 and the DLA Master List. Performance will take place at Hill AFB. To be eligible, contractors must provide a CMMC Level 2 Self-Assessment and maintain full compliance with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 9, 2026.
DEPOT HILL

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Supply of Display Units (NSN 7025016587076)This subcontract involves the manufacture or procurement of two Display Units meeting the specifications of NSN 7025016587076 for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for the production, packaging, and coordination of shipment via the First Destination Transportation program, with final delivery to DLA Dist San Joaquin in Tracy, California. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334511 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, to fulfill the requirements for this specific hardware supply contract.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 335312
New
Federal
PANEL,CONTROL,ELECT
Solicitation # N0038326QAA77
Solicitation NO0383-26-Q-AA77, issued by NAVSUP Weapon Systems Support, seeks a contractor to provide repair, overhaul, and modification services for electrical control panels (NSN 6110-01-433-5020). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return units to a Ready For Issue condition. Key technical requirements include adherence to MIL-STD-130 for markings, the prohibited use of MIL-W-81381 wire in favor of SAE-AS22759, and compliance with ISO 9001/SAE AS9100 quality standards. The scope includes strict protocols for handling items determined to be Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. The government intends to make a single award based on a trade-off between price and past performance, with past performance weighted as the more important factor. Deliveries are expected within 90 days, with Repair Turnaround Time measured from asset return to acceptance at the origin. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for electrostatic protection and Depot Level Repairable labeling. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The resulting contract will be a DO rated order certified for national defense.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
CABLE ASSEMBLY,ROTA
Solicitation # N0038327QAA18
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336412
New
Federal
GUARD,GASOLINE ENGI
Solicitation # N0038327QTA11
Solicitation N0038327QTA11, issued on October 8, 2026, by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the procurement of a Gasoline Engine Guard, identified by NSN 2810-01-737-5535. The government intends to make a single award to a responsible offeror based on a best-value determination where past performance is considered more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings, while price serves as a secondary factor. Quotations are due by November 9, 2026, and the required delivery period is 90 days FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Contractors must comply with cybersecurity standards outlined in NIST SP 800-171 and DFARS 252.204-7012. Quality management compliance with ISO 9001 or SAE AS9100 is required, and inspection and acceptance will occur at the origin. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and compliance with the Buy American and Balance of Payments Program. Offerors must also provide hazardous material certifications and safety data sheets if applicable.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
Federal
CONTROL,ELECTRIC LI
Solicitation # N0038326QAA79
Solicitation N0038326QAA79, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside request for quotations for the teardown, evaluation, repair, and modification of the Control, Electric L1 (NSN 7RH 6220-01-435-0198KB, P/N 712860-1). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in their intended operational environment. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids such as fixtures or special test equipment. All work must be performed in accordance with the most recent technical publications and approved repair manuals, with specific prohibitions against the use of MIL-W-81381 wire, requiring SAE-AS22759 series wire instead. The contractor must maintain a rigorous quality management system compliant with ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Key requirements include the maintenance of detailed historical record files for each serial number and the submission of all failure analysis and corrective action reports to the government. While the contractor is granted Internal Review Board authority for minor non-conformances, formal Material Review Board authority for as-is dispositions remains with the government. Award will be made to a single offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important. Deliveries are FOB Destination, and all items must be preserved and packaged according to MIL-STD-2073-1.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
IGITAL RECEIVER MO
Solicitation # N0038327RAA16
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
PANEL,CONTROL,ELECT
Solicitation # N0038326QAA84
Solicitation N0038326QAA84, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside request for quotations for the repair, overhaul, and upgrade of electrical control panels (NSN 6110-01-472-3531). The contractor is responsible for providing all necessary facilities, labor, materials, and tooling to return assets to a Ready For Issue condition, as the government will not provide manufacturing aids or special test equipment. Key technical requirements include adherence to MIL-STD-130 for markings, MIL-STD-2073 for packaging, and a strict prohibition on the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The required repair turnaround time is 100 days after receipt of the asset. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. Contractors must maintain a quality management system compliant with ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. The contract includes specific protocols for Beyond Economical Repair and Missing on Induction determinations, both requiring written concurrence from DCMA. Invoicing and receiving reports must be processed through Wide Area Workflow, with final inspection and acceptance occurring at the contractor's location.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
CONTROL AND STATUS
Solicitation # N0038327RAA14
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
PANEL,CONTROL,ELECT
Solicitation # N0038326QAA83
Solicitation NO0383-26-Q-AA83, issued by NAVSUP Weapon Systems Support, is a request for quotations for the teardown, evaluation, repair, and modification of Electrical Control Panels (NSN 6110-01-472-3513). The objective is to return these units to a Ready For Issue condition through a process of inspection, component replacement, and testing. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Key technical constraints include a strict prohibition on MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead, and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contract establishes a Repair Turnaround Time of 80 days after receipt of assets, with an induction expiration date set for 365 days after award. Performance is governed by high quality standards, requiring a quality management system compliant with ISO 9001/SAE AS9100 and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. The government utilizes a specific process for Beyond Economical Repair and Missing on Induction determinations, requiring written concurrence from DCMA. Award will be made to a single, technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as the more important factor.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--NVG,HUD CONVERTER,A, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QQB47
Solicitation NO0383-26-Q-B47, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside request for quotations for the teardown, evaluation, repair, and modification of the NVG HUD Converter A (NSN 7RH 1680 014956018 V2). The contractor is responsible for providing all labor, facilities, materials, and tooling necessary to return these units to a Ready for Issue condition. Key technical requirements include strict adherence to MIL-STD-130 for markings, the mandatory use of SAE-AS22759 series wire in place of prohibited MIL-W-81381 wire, and compliance with ISO 9001/SAE AS9100 quality standards. All work must be performed at the identified contractor facility, and any changes to repair manuals or sources require approval from the Procuring Contracting Officer. The contract establishes specific protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are expected within 90 days, with inspection and acceptance occurring at the origin. Packaging must conform to MIL-STD-2073-1 and ANSI/ESD S20.20-2021 for electronic protection. Award will be made to a single, technically acceptable offeror based on an evaluation of technical capability and past performance risk via the Supplier Performance Risk System. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336413
New
Federal
16--PREAMP,MAS, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RBA54
The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to UNDERSEA SENSOR SYSTEMS INC for the repair of 21 units of the Preamplifier for the P-8 aircraft, identified by NSN 7R-1680-015855400-P8 and part number 5798-8000-001. This action is justified under 10 U.S.C. 2304(c)(1) and FAR 6.103-1 due to the OEM’s exclusive ownership of the technical data and design rights, with no alternative sources capable of performing the repair without authorized data. Delivery will be FOB origin, and the contract will have a one-year duration with UID marking and Buy American Act requirements applying. The procurement will be conducted electronically via the NECO portal, with the solicitation expected to issue on August 21, 2026, and close on September 22, 2026, though responses received within 45 days of the pre-solicitation notice may be considered. Award is anticipated by December 2026, and no competitive process is planned unless a capable commercial alternative is identified within one day of notice. Interested parties must submit capabilities via email to the designated contracting officer, and no hard copies or telephone inquiries will be accepted. The NAICS code is 336413, and this procurement is not set aside for small businesses.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 26 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334511
Awarded
Federal
63--REAR COVER ASSEMBLY
Solicitation # SPE4A613TS301

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
66--Instruments and Laboratory Equipment
Solicitation # SPRWA1-13-Q-00066

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
63--DETECTOR,FIRE,OVERHEAT
Solicitation # SPE4A613TR813

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Closed
Federal
USNS SACAGAWEA VDR and GDMSS Service
Solicitation # N32205-13-T-6226
Military Sealift Flt Supp Command Norf

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
Engineering Trade Study for Joint Precision Approach and Landing System Foreign Military Sales United Kingdom (UK) Strategic Development
Solicitation # JPALSENGSTUDYUKFMS19DEC12
Naval Air Systems Command

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Closed
Federal
RADAR REFLECTORS
Solicitation # 2113403B830400007
Sflc Procurement Branch 3(00040)

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
63--DETECTOR,FIRE,OVERHEAT
Solicitation # SPE4A613TQ877

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
63--DETECTOR,FIRE,OVERHEAT
Solicitation # SPE4A613TR004

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
58--KEYBOARD,DATA ENTRY
Solicitation # SPE4AR13T1237

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
58--EXTENSION ASSEMBLY
Solicitation # SPE4AR13T1232

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
63--SENSING ELEMENT,FIRE D
Solicitation # SPE4A613TQ085

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details
NAICS: 334511
Awarded
Federal
58--KIT,DISPLAY UNIT AN
Solicitation # SPE4AR13T1326

POSTED

over 13 years ago

CLOSED

over 13 years ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS