This Pre-Solicitation opportunity was posted on August 5, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

J85 ENGINE LEAF, INNER, VEN

Awarded

SPE4A7-14-R-2747Federal

Submission Closed09/22/2014, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

Federal

SHIPPING AND STORAGE_End_Item_F100_NSN_8145014503984NZ_PN_P4078845

Solicitation # FD20302700577

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Supply of Turbo-shaft Engine Test StandThis subcontract involves the procurement of one runnable turbo-shaft engine mounted on an operational test stand for aviation maintenance projects at Texas State Technical College. The required equipment must be comparable to the AeroTrain AE-32-250 or Allison 250 and must include all necessary turbine-specific controls and instrumentation. To ensure suitability for an educational environment, the system must adhere to aviation instructional safety standards and be delivered with complete manufacturer documentation and operating instructions. The solicitation was posted on November 3, 2026, with a response deadline of November 24, 2026. Managed by the Texas State Technical College System under NAICS code 336412, the contract focuses on providing prime contractors with the necessary hardware to support technical training and maintenance operations.

Texas State Technical College System

POSTED

DEADLINE

Aviation Engine Test Stands at TSTC - Waco

Solicitation # 66

Texas State Technical College is soliciting proposals under solicitation number 66 for the procurement of runnable aircraft engine test stands for the Aviation Maintenance program at the Waco campus. The requirement includes one 4-cylinder reciprocating engine test stand with a carburetor, one 4-cylinder reciprocating engine test stand with fuel injection, and one turbo-shaft engine test stand. All equipment must be new or clearly identified by condition, fully functional, and suitable for instructional use involving engine operation, inspection, and troubleshooting. The supplier is responsible for providing all manufacturer documentation, operating instructions, maintenance guidance, warranty information, and safety materials. Proposals will be evaluated based on five key criteria: equipment specifications and equivalency, operational readiness and instructional suitability, warranty support and documentation, delivery and implementation requirements, and total proposed cost. Suppliers must specify if delivery, installation, setup, and training are included in the pricing and identify any necessary site preparations. The college prefers the quickest available lead time for delivery to the Waco campus. All proposals must be submitted through the Strategic Sourcing portal by the deadline of November 24, 2026.

Texas State Technical College System

POSTED

DEADLINE

Engine Fuel Tank Supply (NSN 2910-01-733-8273)This subcontract involves the procurement and delivery of one Engine Fuel Tank for the Department of Defense under the DLA Weapons Support Land Supply Chain. The hardware must strictly adhere to the specifications for NSN 2910-01-733-8273 and part number C637-2005, with the final product to be delivered to the designated DLA location in Lemoore, California. Eligible providers must maintain Small Business certification and comply with all Department of Defense representations regarding telecommunications equipment. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336412.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of 5th Stage Aircraft Gas Turbine Compressor BladesThis subcontract, issued by the Department of Defense DLA Weapons Support ASC, involves the manufacturing of 313 high-precision 5th stage aircraft gas turbine compressor blades. The contractor is responsible for fabricating these components according to NSN 2840-00-877-0018 using aerospace-grade alloys and precision machining to meet Critical Safety Item tolerances. All work must be performed in accordance with SAE AS9100 quality systems and CMMC Level 2 standards, ensuring mercury-free manufacturing and adherence to MIL-STD-129 and MIL-STD-2073-1E packaging requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412, with the place of performance located in Tracy, California. Interested parties must respond by November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

HPT Stator Shroud FabricationThis subcontract involves the fabrication of 387 HPT Stator Shrouds for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work requires precision machining in strict accordance with TDP Rev B Gen 2 and Drawing NR 07482 P4TF2, with all production following established Process Operations and Inspection Method sheets and bare item marking per RQ017. To ensure compliance with ITAR and EAR regulations, the performing contractor must maintain CMMC Level 2 and JCP Certification. The project is categorized under NAICS code 336412, with performance taking place in zip code 32212-0103. The solicitation was posted on November 3, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Turbo Supercharger Component SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement of 13 turbo supercharger units for prime contractors. The project is designated as a Total Small Business Set-Aside under NAICS code 336412, with performance taking place in New Cumberland. The supplier must adhere to strict regulatory standards, including MIL-STD-129 for marking and shipment and DFARS 252.225-7001 Buy American requirements. Additionally, the contractor is required to maintain DFARS 252.204-7012 cybersecurity compliance and ensure full registration within the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Compressor Case and Vane Assembly SupplierThis subcontract involves the manufacture and supply of aircraft compressor case and vane assemblies for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for producing components according to NSN 2840-01-301-8860 and Meggitt Defense Systems part number 41322-1, ensuring full compliance with the DLA Master List of Technical and Quality Requirements. The contract requires the delivery of one precision-manufactured assembly on a FOB Origin basis. To be eligible, the contractor must maintain ISO 9001:2015 certification and provide a CMMC Level 2 self-assessment. The work is associated with NAICS code 336412 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Corpus Christi, Texas. Responses to this solicitation are due by November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A6-27-T-8185

Solicitation SPE4A6-27-T-8185 is a fixed-price procurement issued by the DLA Weapons Support ASC Commodities Division for the supply of 100 socket head cap screws, identified by NSN 5305016214516. The items are to be delivered FOB Origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, with an original required delivery date of October 29, 2026, and a delivery window of five days after order. The contract specifies the use of McMaster-Carr part number 91263A809 and ANSI part number AES16C625B50DG5D71. Quality assurance and technical requirements are governed by the DLA Master List, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and RP001, while shipment marking must comply with MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various DFARS and FAR clauses, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-27-Q-0180

Solicitation SPE4A7-27-Q-0180 is a firm fixed price request for quotations issued by the DLA Weapons Support ASC for the procurement of 387 units of HPT Stator Shrouds (NSN 2840-01-438-1104). The contract requires delivery within 250 days after order, with inspection and acceptance occurring at the origin. Technical compliance is governed by Part Piece Number 5073T56 TDP Rev B Gen 2 and Quality Assurance Provision QAP 99207. Award will be determined based on best value, utilizing a trade-off process where non-price factors, specifically past performance and SPRS assessments, are weighted approximately equal to cost or price. The contract mandates strict adherence to cybersecurity and export control regulations, including CMMC Level 2 certification via a C3PAO and compliance with ITAR or EAR regulations. Technical data is restricted to approved US/Canada Joint Certification Program participants. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific requirements for bare item marking and the inclusion of material certifications and test reports. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CASE AND VANE ASSEMBLY

Solicitation # SPE4A5-27-T-2199

Solicitation SPE4A5-27-T-2199 is for the procurement of one Case and Vane Assembly for aircraft compressors, identified by NSN 2840-01-301-8860 and Meggitt Defense Systems part number 41322-1. The requirement is for a single unit to be delivered to the USA DEP Corpus Christi facility in Texas. The original required delivery date is October 20, 2026, with a specified delivery timeframe of five days after award. Shipping must be conducted via the fastest traceable means, excluding parcel post, with inspection and acceptance occurring at the point of origin. The contract mandates strict adherence to quality and technical standards, requiring the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA packaging requirements. Key compliance mandates include CMMC Level 2 self-assessment, the Buy American Act, and the prohibition of additive manufacturing unless specifically authorized. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and the application of various FAR and DFARS clauses regarding cybersecurity, export controls, and small business representations.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1075

Solicitation SPE4A5-27-T-1075, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of 85 units of Nomex component shields, identified by NSN 2925-01-421-8530. This item is classified as a critical application commercial item. The required delivery date is April 23, 2027, with a need ship date of April 6, 2027, and a delivery lead time of 165 days after order. Shipping is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Quality assurance involves sampling methods aligned with MIL-STD-1916 or ASQ H1331, with a zero non-conformance requirement for acceptance if MIL-STD-105/ASQ Z1.4 is used. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 2 days

AI Contract Overview

Solicitation SPE4A7-14-R-2747 is a 100 percent Small Business Set-Aside for the procurement of inner vane leaves for J85 aircraft engines under NSN 2840-01-480-1743. This requirement is designated as a Navy Critical Safety Item subject to configuration control, with both Government First Article Testing and Contractor Production Lead Time requirements. The contract is intended as an Indefinite Quantity award with an estimated annual demand of 172 pieces. Approved sources for part number 6029T01G05 include Whitcraft LLC, Associated Aerospace Activities, and General Electric Company. The procurement specifies FOB Origin to Stock Location with origin inspection and a requested contractor production lead time report delivery of 330 days AFAA. Offerors must submit a completed solicitation package, as electronic offers are not acceptable. The solicitation was issued on August 21, 2014, with a response deadline of September 22, 2014. Interested parties can access the necessary documentation via the DIBBS portal.

General Info

Agency

N/A

Contract Value

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

USA

Set-Aside

SBA

Awardee

ASSOCIATED AEROSPACE ACTIVITIES INC

Award Issued Date

12/04/2014, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 5

Presolicitation

AwardedDec 4

Contract was awarded

Submission Closed

09/22/2014, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Melissa E. Reams

contact@example.gov

+1 (555) 000-0000

Full Description

NSN 2840-01-480-1743; 100% Small Business Set-Aside; LEAF, INNER, VEN, AIRCRAFT ENGINE; Navy Critical Safety Item; Configuration Control Applies; Government FAT and Contractor PLT apply; Part Numbered Item, Approved Sources: WHITCRAFT LLC (32543) P/N 6029T01G05 ASSOCIATED AEROSPACE ACTIVITIES (51226) P/N 6029T01G05 GENERAL ELECTRIC COMPANY (99207) P/N 6029T01G05 Purchase Request is intended to be awarded as an Indefinite Quantity Contract with an estimated annual demand of 172 pieces (See solicitation for additional details); Origin inspection; FOB Origin to Stock Location; Requested Ktr PLT Report Delivery is 330 days AFAA; Electronic Offers are not acceptable; Offerors must submit a completed solicitation package; A copy of the solicitation will be available via the DIBBS at https://www.dibbs.bsm.dla.mil/RFP on the issue date cited in the RFP. RFP's are in portable document format (PDF). To download and view these documents you will need the latest version of Adobe Acrobat. This software is available free at http://www.adobe.com. A paper copy of this solicitation will be available to requesters. The solicitation issue date is August 21, 2014.