Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Jettison Unit, Hose

Active
SPRTA1-26-Q-0403Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation SPRTA1-26-Q-0403 for a Jettison Unit, Hose is exempt from public synopsis requirements under FAR 5.101(b)(1)(i) because the acquisition is anticipated to be below the simplified acquisition threshold and will be conducted entirely through electronic means. The full solicitation will be posted on the Governmentwide Point of Entry, and offerors are permitted to respond electronically via email, satisfying the criteria for waiver under 41 USC § 426, which defines electronic commerce to include electronic mail. The solicitation was posted on July 20, 2026, with a response deadline of August 19, 2026. No set-aside is in effect, and the contract falls under NAICS code 336413. The action is managed by the Department of Defense through the Office of DLA Aviation at Tinker AFB, Oklahoma, with Howard Heflin serving as the primary point of contact via email. The entire process is conducted digitally through the SAM.gov portal, ensuring accessibility and compliance with electronic procurement standards.

General Info

Jettison Unit, Hose solicitation via SAM.gov, electronic only, no set-aside, deadline August 19, 2026.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(1)

SPRTA126Q0403.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3070, USA
Organization / Agency
Department Of Defense → Ok DLA Aviation At Oklahoma City
View Agency Profile
Office AddressTINKER AFB, OK, 73145-3070, USA
Contacts
Howard Heflin
contact@example.gov

Full Description

Show more

SUBJECT:  Synopsis Waiver


Exception is taken to this requirement solicitation SPRTA1-26-Q-0403 for PR 26-01910 of the synopsis publicizing IAW with FAR 5.101(b)(1)(i)(DEVIATION), exception:


(i) Is valued at or below the simplified acquisition threshold (SAT) and the solicitation will—


(A)Be posted to the GPE in accordance with 5.201; and


(B)Permit the public to respond to the solicitation electronically.


Electronic commerce is defined at 41 USC sec. 426 as electronic techniques for accomplishing business transactions, including electronic mail. Thus, provided the complete solicitation package is available through the GPE and offerors are permitted to respond electronically (i.e., email in this case), the proposed contract action would not need to be synopsized.


Therefore, synopsis is hereby waived as this acquisition is not expected to exceed the simplified acquisition threshold, request for proposal will be made through Contract Opportunities and the offerors will be able to respond electronically.

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract specifies the procurement of 68 structural aircraft plates under NSN 1560-01-376-1580, with delivery required within 70 days of order. Technical requirements are governed by engineering drawings and the DLA Master List of Technical and Quality Requirements, where referenced R or I numbers define mandatory compliance standards. Packaging must adhere to DLA specifications, and any configuration changes require formal Engineering Change Proposals or variance requests. Inspection and acceptance occur at the manufacturer’s facility, with strict controls on removal of government identification from non-accepted items. All special processes must be conducted by NADCAP-accredited organizations. Sampling follows MIL-STD-1916 or ASQ H1331 with zero-defect acceptance unless otherwise stated, and unspecified attributes are treated as major. Digital Mylar data provided by DLA must be accurately plotted onto stable base material, with dimensional tolerances strictly enforced across vertical, horizontal, and diagonal measurements, including grid and registration mark precision. Export control applies to technical data under ITAR or EAR, restricting access to authorized U.S. contractors with JCP certification, completed DOD training, and DLA approval. The solicitation number is SPE4A6-26-T-05PQ, issued July 13, 2026, with responses due July 21, 2026, and performance is located at Tinker AFB, Oklahoma.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
ARM, EMERGENCY ESCAPEThe contract pertains to the procurement of 20 units of an ARM, EMERGENCY ESCAPE item identified by NSN 1560-00-333-6710, with a delivery requirement of 171 days after award. Manufacturing must be accomplished via a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support must be directed to designated DLA supply chain teams based on application domain—Aviation or Land & Maritime. The item is subject to stringent quality standards under SAE AS9100, along with specific packaging requirements per RP001 and strict compliance for measuring and test equipment under RT001. Documentation for source approval must adhere to RC001, and physical identification and bare item marking must comply with RQ017. The technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior government authorization, and only DLA contractors with approved JCP certification, completed training, and DLA authorization may access the data. Cybersecurity compliance at CMMC Level 2 is required through a certified third-party assessment organization under RD005. The solicitation number is SPE4A7-26-T-584L, with a response deadline of July 29, 2026, and the performance location is Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COMThis contract, issued under solicitation SPE4A6-26-T-08PJ, is for the procurement of four units of a structural component for aircraft, identified by NSN 1560016894017 and part number 70500-02070-158, supplied by SIKORSKY AIRCRAFT CORPORATION (CAGE 78286). The item is classified as a critical application component and is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA Directive RP001 and MIL-STD-129, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items must meet DLA’s packaging standards. Supply chain traceability documentation must be retained by the contractor per DLAD Procurement Note C03, though item unique identification is not required per customer preference. Delivery is set for 171 days after contract award, with FOB origin terms and inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract enforces zero variance in quantity and mandates compliance with SIKORSKY’s approved sampling plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. A Certificate of Conformance is authorized unless overridden by a quality assurance letter. The supplier must also complete a CMMC Level 2 self-assessment to meet cybersecurity requirements. All shipments must be palletized per DLA guidelines and addressed to the specified logistics point with the designated point of contact, Tyana Anderson. The original required delivery date is August 15, 2027, with a need ship date of January 17, 2027, and the contract is governed by the technical and administrative controls applicable to Department of Defense procurements.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, BREAKAWAYThe contract pertains to the procurement of 12 units of a breakaway fitting identified by NSN 1560-01-148-1719 under solicitation SPE4A5-26-T-299Y, with a delivery deadline of 171 days after award. The acquisition is structured as a total small business set-aside under NAICS code 336413, managed by the Department of Defense through the ASC Supplier Operations OEM Division. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but item unique identification is explicitly not required per the service customer’s directive. Measuring and test equipment must meet specified standards, and documentation for source approval is mandatory. The place of performance is New Cumberland, Pennsylvania, with Kirstie Ragsdale as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CYLINDER ASSEMBLY, AThe contract is for one cylinder assembly, actuating, linear, with part number 1FA10038-1 and NSN 1650-01-388-4903, sourced from Triumph Actuation Systems LLC, CAGE 26437. The item is classified as a critical application requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by RP001, and all markings and labeling must follow military specifications. Zero defect acceptance is mandated under MIL-Std-1916 or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No unit identification is required per customer request, and deviation or waiver requests must follow formal configuration change management procedures. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the single unit must be delivered within 171 days from the contract date to the specified receiving warehouse in Tracy, California. The original required delivery date is March 4, 2027, with a needed ship date of January 17, 2027. Pricing is fixed at $1.00 per unit, and no quantity variance is permitted. The solicitation number is SPE4A7-26-T-584S, issued under NAICS 336413, with contractual obligations binding to the DLA Master List revisions effective as of the solicitation issue date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WEIGHT, WHEEL BALANCThe contract pertains to the procurement of Wheel Balancing Weights, identified by NSN 1630-01-281-8724 and part number 2609689 from Honeywell International Inc., with a quantity of 265 units. It is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List revision in effect on the solicitation issue date, and all inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Critical attributes are subject to verification level VII, major to IV, and minor to II, with AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and though Unique Item Identification is not required, physical marking per RQ017 is mandatory. Delivery is FOB origin with a 171-day lead time, and acceptance is at destination. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous, with palletization in compliance with DLA Packaging Requirements. The required delivery date is March 2, 2027, with a ship date of January 17, 2027. All shipments must be sent to the DLA San Joaquin receiving warehouse in Tracy, CA, and transportation procedures must follow DLAD Proc Notes C19 and C20. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling protocols. The contract is managed by the Department of Defense under solicitation number SPE4A5-26-T-300F, with Dominique Howard as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CONTROL ASSEMBLY, PUThe contract pertains to the procurement of 24 units of a CONTROL ASSEMBLY, PU with NSN/Part Number 1680-00-672-1068, under solicitation SPE4A7-26-T-568A, with a response deadline of July 21, 2026, and delivery required within 27 days after order. The item is classified as export-controlled technical data under either ITAR or EAR, restricting its disclosure or transfer to foreign persons regardless of location, including foreign nationals within the U.S. and foreign subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed mandatory training on handling DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to handle this data. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance location at Robins AFB, Georgia, and primary point of contact is Rahsaan Deloney.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
FAN, CENTRIFUGALThis contract is for the procurement of 31 centrifugal fans, identified by NSN 1660-01-571-5624 and part number R4-L2R-20AC-GP, under solicitation SPE4A7-26-T-584Z. The items must comply with all applicable DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 for packaging. Packaging and labeling must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit packaging as specified. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Delivery is required within 171 days from the contract date, with the original delivery deadline set for June 6, 2027, and the need ship date of January 17, 2027. The product must be delivered FOB origin to the specified warehouse at Tracy, California, with transportation governed by DLAD Proc Notes C19 and C20. The contract enforces strict quality control under MIL-STD-1916 or equivalent zero-based sampling plans, with attributes classified as critical, major, or minor assigned verification levels or AQLs accordingly, and non-conformances not permitted unless specifically allowed. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and all government identification must be removed from non-accepted supplies. The unit of issue is each, priced at $31.00 per unit, for a total contract value of $961. Compliance with DoD authorized units of issue and ANSI X12 equivalency is required. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Amber Wells as the primary point of contact. All technical and quality criteria referenced by R or I numbers are incorporated by reference from the DLA Master List, and the version in effect on the solicitation issue date controls compliance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WIRE ROPE ASSEMBLY, SINThis contract is for the procurement of a single-leg wire rope assembly, identified by part number 35-12055-36 and NSN 4010-00-775-3323, with a quantity of 13 units required under solicitation SPE4A5-26-T-299K. The item is designated as a critical application item for The Boeing Company and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. The procurement mandates adherence to stringent packaging directives under ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin with inspection and acceptance occurring at destination, and the required delivery window is 171 days from the contract award, with a need ship date of January 17, 2027, and an original delivery deadline of July 15, 2028. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and source approval documentation must be provided. Item Unique Identification is not required per customer request, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and all measuring and test equipment must be properly calibrated. All shipments must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics are governed by specific DLA procedural notes.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, CARRIAGE, INThe contract pertains to the procurement of three Fitting, Carriage, IN units, manufactured via a forging process requiring specialized tooling. The item is identified by NSN 1560-00-602-4422 and is part of a Women-Owned Small Business Set-Aside solicitation under DLA contract number SPE4A7-26-T-585V, with a response deadline of July 29, 2026, and a delivery requirement of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with configuration control, inspection at origin, and supplier qualification governed by established DLA protocols including Qualified Products and Manufacturers Lists. Export-controlled technical data associated with this item falls under ITAR or EAR regulations, restricting disclosure to foreign persons without prior authorization and limiting access to contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal authorization. Item Unique Identification is waived per customer request. Packaging, cybersecurity certification at CMMC Level 2, and documentation for source approval submissions are mandatory. Performance is designated at Tinker AFB, Oklahoma, and all bidders must comply with DLA’s documentation and supply chain protocols, including the handling of covered defense information and adherence to engineering change management procedures.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

NAICS: 336413
New
Federal
New Manufacture of PANEL,CONTROL,ELECT/1680012808653RK/ L5304289-031
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
Federal
Valve, Fuel Pressuring
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
ACTUATOR, ELECTRO-ME_End_Item_E-3_NSN_1680010099089AW_PN_10-60822-4
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
PANEL, CONTROL, ELECTRIC_End_Item_B-1B_NSN_1680014819267RK_PN_30224-0101The U.S. Department of Defense, through the Department of the Air Force and the Air Force Sustainment Center’s 422nd Supply Chain Management Squadron, is conducting market research for the procurement of a Panel, Control, Electric with NSN 1680-01-481-9267RK and part number 30224-0101, intended for use on the B-1B platform. This effort is classified under Federal Stock Class 1680 and NAICS Code 336413, which carries a size standard of 1,250 employees, and the government is seeking responses from all business types including large businesses, small businesses, small disadvantaged businesses, 8(a)s, service-disabled veteran-owned small businesses, HUBZone firms, and women-owned small businesses. The place of performance is Tinker Air Force Base, Oklahoma, and all communications must be directed to the designated workflow email address. There is no active solicitation at this time; the notice is strictly a sources sought action to gauge industry interest and capabilities. Interested parties must select the “Add Me to Interested Vendors” button to participate in this market research effort, and any requests for a formal solicitation will not be addressed. Responses are due by July 28, 2026, at 4:59 a.m. Central Standard Time, and the opportunity was posted on July 20, 2026. The contracting office has not issued any procurement vehicle or timeline for future solicitation, and vendors should not assume a contract award will follow this research phase.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
Federal
VALVE_End_Item_F110_NSN_2915011829346JF_PN_1886-280The U.S. Air Force, through the 421st SCMS Requirements Office at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources capable of manufacturing spare valves for the F110 platform. The item in question is identified by NSN 2915-01-182-9346JF and part number 1886-280, classified under Federal Stock Class 2915 and NAICS Code 336412, which carries a size standard of 1,500 employees. This is a Sources Sought notice, not a solicitation, meaning no contract will be awarded based on responses, and no funds are available at this time. The goal is to evaluate market capabilities to determine whether the requirement can be competitively sourced or set aside for small businesses, including 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses. Respondents must demonstrate the ability to handle new manufacture of the valve, including component procurement, inspection, testing, packaging, shipping, supply chain management, and addressing long-lead items and diminishing manufacturing sources. Nonrecurring engineering costs to qualify as an approved supplier may also be involved. Responses must be submitted via the designated workflow email by the deadline, and interested parties are required to select the “ADD ME TO INTERESTED VENDORS” button to participate in this market research effort.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
Federal
ROTOR, FAN_End_Item_F110_NSN_2840015807062PR_PN_9547M28G15The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential suppliers for the new manufacture of a Rotor, Fan with NSN 2840-01-580-7062PR and Part Number 9547M28G15, intended for use on the F110 engine platform. This effort is a Sources Sought Synopsis under FAR Part 10 and is not a solicitation or guarantee of contract award; no funds are currently available, and the government does not intend to award a contract based on responses. The requirement seeks vendors capable of end-to-end production including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources and long-lead material sourcing. Nonrecurring engineering costs associated with qualification as an approved source may also be required. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the government is actively encouraging participation from all types of businesses, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses. Responses must be submitted through the designated Interested Vendors button on the SAM.gov portal by the deadline of July 28, 2026, at 4:59 AM Central Standard Time. All communication regarding this market research must be directed to the workflow email address 421scms.requirements.workflow@us.af.mil. The place of performance is Tinker Air Force Base, Oklahoma, and the government may consider splitting the requirement by airframe to enhance competition. This effort is purely for information gathering to inform future acquisition strategy decisions.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
Federal
Tank, Fuel, AircraftThe contract is for the procurement of fuel tanks designed for aircraft applications, identified by the descriptive title “Tank, Fuel, Aircraft.” It is solicited under the number SPRTA1-26-R-0362, with a posted date of July 20, 2026, and a response deadline of August 19, 2026, at 8:00 PM. The solicitation carries no set-aside designation and falls under the NAICS code 336413, corresponding to aircraft manufacturing. The contracting office is located at Tinker Air Force Base in Oklahoma City, Oklahoma, under the Department of Defense’s Defense Logistics Agency Aviation. Seven unique National Stock Numbers and seven corresponding part numbers are listed, each identifying specific configurations or variants of the fuel tanks required. The primary point of contact for inquiries is Howard Heflin, reachable via email at howard.heflin@us.af.mil. All performance and delivery obligations are expected to be fulfilled within the U.S., with no specific location outside the base indicated for performance.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336412
New
Federal
F110 CASE,COMBUSTION CHA (AMC 3V)The contract titled F110 CASE, COMBUSTION CHA (AMC 3V) is a solicitation issued by the Department of Defense through the Office of DLA Aviation at Tinker AFB, Oklahoma, under solicitation number SPRTA1-26-R-0365. Posted on July 20, 2026, it requires responses by August 19, 2026, at 9:00 PM Eastern Time and is associated with the NAICS code 336412, indicating it relates to aerospace product and parts manufacturing. The place of performance is not specified in detail, but the primary point of contact for inquiries is Breann Irving, reachable via email at breann.irving@us.af.mil or by phone at 385-591-1658. Interested parties are directed to the SAM.gov workspace link for further details and additional information referenced in the attached presolicitation documents.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336413
New
Federal
MOTOR,ALTERNATING C / 6105004743368HY / R510-4The solicitation titled MOTOR, ALTERNATING C / 6105004743368HY / R510-4 is issued under solicitation number SPRTA1-26-Q-0402 by the Department of Defense through the Ok DLA Aviation office located at Tinker Air Force Base, Oklahoma. The posting date is July 20, 2026, with a response deadline of August 19, 2026, at 8:00 PM Eastern Time. No set-aside provisions are applied to this opportunity, making it open to all eligible offerors. The North American Industry Classification System code is 336413, indicating the focus on aircraft engine and engine parts manufacturing. The primary point of contact for inquiries is Jessie Payne, reachable via email at Jessie.payne@us.af.mil. Performance location details are not specified, and all relevant information and submission instructions are to be obtained from the attached solicitation document accessible through the provided SAM.gov workspace link.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336413
New
Federal
Vane Pump AssemblyThe contract action pertains to the procurement of a Vane Pump Assembly under solicitation number SPRTA1-26-Q-0404, issued by the Department of Defense through the Ok DLA Aviation office located at Tinker Air Force Base, Oklahoma. The acquisition is not expected to exceed the simplified acquisition threshold, which permits a waiver of the standard synopsis requirement under FAR 5.101(b)(1)(i). The solicitation will be posted to the Government Point of Entry and will allow offerors to respond electronically via email, fulfilling the conditions for synopsis exemption as defined by 41 USC sec. 426. The request for proposal is being issued through Contract Opportunities, and no set-aside provisions are being applied. The solicitation was posted on July 20, 2026, with a response deadline of August 19, 2026. The North American Industry Classification System code for this procurement is 336413. Primary point of contact for inquiries is Howard Heflin, reachable via email at howard.heflin@us.af.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336412
New
Federal
F110 NOZZLE,TURBINE,AIRC (AMC 3R)The contract pertains to the procurement of an F110 Nozzle, Turbine, Aircraft for the U.S. Air Force, under solicitation number SPRTA1-26-R-0361, posted on July 20, 2026, with a response deadline of August 19, 2026, at 9:00 PM Eastern Time. The North American Industry Classification System code is 336412, indicating this solicitation targets manufacturers involved in aircraft engine and engine parts manufacturing. There is no set-aside designation, meaning the opportunity is open to all eligible businesses without preferences for small, minority-owned, or other designated categories. The contracting office is the Defense Logistics Agency Aviation based at Tinker Air Force Base in Oklahoma City, Oklahoma, with the full organizational affiliation under the Department of Defense. The primary point of contact for inquiries is Breann Irving, reachable via email at breann.irving@us.af.mil or by phone at 385-591-1658. The place of performance is not specified in the provided data, and bidders are directed to review the presolicitation and attached solicitation documents for detailed technical specifications, evaluation criteria, and submission instructions. All relevant information is accessible through the provided SAM.gov link.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
Federal
NSN: 2840-01-374-0735NZ, P/N: 4080513, NOUN: SUPPORT, AUGMENTER PR FD2030-25-00159The contract pertains to the procurement of Augmenter Support components identified by NSN 2840-01-374-0735NZ and Part Number 4080513, designed for use on the F-100 Engine. The nozzle assembly provides critical structural support for installing actuators, sync rings, and associated hardware, and is fabricated from Titanium Alloy to meet demanding performance standards. A total of 32 units are required under Line Item OOO1, with base, minimum, medium, and maximum quantities specified, while additional line items include two production first articles, one expended first article, and separate line items for the test plan and test report, each requiring one unit. The acquisition is solicited under RFP #SPRTA1-26-R-0386 with a response deadline of September 3, 2026, and is tied to PR #FD2030-25-00159. Qualified sources include Barnes Group, RTX Corp, and Jedco Inc., and the procurement uses AMC code 1/C, indicating a full and open competition without set-aside restrictions, though Free Trade Agreements may apply. Export control regulations are active, and the government has opted not to use commercial item acquisition policies under FAR Part 12, requiring interested parties to notify the contracting officer if they can meet requirements with commercial items within fifteen days. Award is contingent upon full compliance with qualification requirements under FAR clauses 52.209-1 or 52.209-2. The solicitation is accessible exclusively via sam.gov, with all inquiries directed to Alex Varughese; electronic submissions are mandatory, and an independent Ombudsman is available to address contractor concerns confidentially without involvement in evaluation or selection.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details