This Solicitation opportunity from Department Of Defense was posted on May 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

JEWEL ASSEMBLY

Closed

SPE4A6-26-T-59B9Federal

Submission Closed05/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

RECEPTACLE, AIRCRAFTThe contract pertains to the procurement of five units of an aircraft receptacle, identified by the National Stock Number 1680-01-551-9007. The solicitation number for this requirement is SPE4A5-26-T-245G, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 16, 2026, and the response deadline is set for June 24, 2026. This procurement is categorized as a federal solicitation, with no specified set-aside type or designated NAICS code, and no detailed location for performance has been provided. The contract request originates from a government agency aiming to acquire these components to support its operations, likely involving aircraft maintenance or assembly. Although there is no explicit contact information or office address listed, potential vendors can access further details and submit their responses via the official Defense Logistics Agency contracting web portal. This purchase request highlights a straightforward acquisition process focused on timely submission within the provided solicitation timeline.

Defense Logistics Agency

POSTED

DEADLINE

ROD ASSY, LOWER FWD,The contract pertains to the procurement of four units of the ROD ASSY, LOWER FWD, identified by the part number 5306-01-566-3405. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense, with the solicitation number SPE4A5-26-T-246B. The solicitation was posted on June 16, 2026, and responses were due by June 24, 2026. This contract involves a federal organization and does not specify any set-aside type or small business designations. The place of performance and detailed office address information are not provided. The request is managed through an official government procurement portal, ensuring compliance with federal acquisition processes for military or defense-related components.

Defense Logistics Agency

POSTED

DEADLINE

CONNECTOR, AIRCRAFT,The contract pertains to the procurement of aircraft connectors, specifically Part Number 4920-01-588-5404, with an order quantity of five units. It is issued under solicitation number SPE4A5-26-T-243S by the Defense Logistics Agency, a component of the Department of Defense. The solicitation was made public on June 16, 2026, and responses are due by June 24, 2026. The contract is categorized as a federal solicitation, but no special set-aside or NAICS code information is provided. The contract's place of performance and office address details are not specified, and there is no listed point of contact. The purchase request number associated with this contract is 7017199542. The procurement aims to support federal defense operations with the necessary aircraft connectors, reflecting the agency’s ongoing efforts to maintain and equip military assets. Additional details and the solicitation can be accessed through the Defense Logistics Agency's online portal.

Defense Logistics Agency

POSTED

DEADLINE

REPAIR KIT, AIRCRAFTThe contract involves the procurement of three aircraft repair kits identified by the National Stock Number 4920-01-684-3304. It is issued as a solicitation under the number SPE4A5-26-T-245B by the Defense Logistics Agency, a branch of the Department of Defense. The solicitation was posted on June 16, 2026, with a response deadline set for June 24, 2026. This contract is a federal solicitation without any specified set-aside status or NAICS code, indicating it is open under general federal acquisition rules. Although specific details such as the office address and place of performance are not provided, the procurement clearly supports defense logistics requirements, emphasizing the importance of timely response and compliance with defense contracting procedures. The official solicitation details and response submission can be accessed through the Department of Defense's contracting portal.

Defense Logistics Agency

POSTED

DEADLINE

FAIRING, AIRCRAFTThis contract involves the procurement of 24 aircraft fairings, identified by the National Stock Number 1560-01-643-4675. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated as SPE4A1-26-T-2333. It was posted on June 16, 2026, with a response deadline set for June 23, 2026. The contract is structured as a solicitation, inviting vendors to submit proposals for this specific quantity of aircraft fairings. The contract does not specify any set-aside type, indicating it may be open to all qualified suppliers without preference for small or disadvantaged businesses. While no detailed location information for the place of performance or office address is provided, the contracting agency operates within the federal government framework. Interested parties are directed to access the procurement details through the Defense Logistics Agency’s bidding system using the supplied solicitation number link.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 7 days

AI Contract Overview

This contract entails the procurement of 11 units of a jewel assembly part, identified by NSN 6610-00-070-0014, under solicitation SPE4A6-26-T-59B9. The purchase is for the Department of Defense’s ASC Commodities Division, with delivery scheduled to occur within 294 days, and the goods are to be shipped FOB origin to the Defense Logistics Agency Distribution San Joaquin warehouse in Tracy, California. The contract specifies strict compliance with a comprehensive set of technical and quality requirements, including adherence to DLA’s Master List of Technical and Quality Requirements, MIL-STD-1916 sampling plans, and packaging instructions conforming to ASTM D3951 and MIL-STD-129 standards. Inspection and acceptance are to take place at the origin point. The contract also highlights that item unique identification is waived at the customer’s request, and there are specific provisions around packaging, marking, and palletization under DLA guidelines. The drawing and part revision numbers referenced govern the design and manufacturing requirements, ensuring conformity with established military specifications. Key administrative points include exact quantities with no variance allowed, zero tolerance on non-conformances in inspection samples unless otherwise specified, and adherence to DoD-prescribed units of issue for ordering and logistics. The contracting agency’s point of contact is provided for further communication, and delivery coordination and freight routing instructions are detailed to facilitate timely and compliant fulfillment.

General Info

Purchase of 11 jewel assembly parts with strict military quality, packaging, and delivery requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-59B9 for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 17

Solicitation

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

DIJAHNE MCPHERSON

contact@example.gov

+1 (555) 000-0000

Full Description

JEWEL ASSEMBLY
JEWEL ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SPE4A6-26-T-59B9
SECTION B
IAW BASIC DRAWING NR 98810 A11353
REVISION NR D DTD 03/03/1983
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 98810 P1322
REVISION NR Z DTD 04/16/1972
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 98810 M1091
REVISION NR M DTD 03/12/1982
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 98810 P1321
REVISION NR V DTD 04/14/1980
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7012983738 0001 EA 11.000
NSN/MATERIAL:6610000700014
DELIVERY (IN DAYS):0294
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE4A6-26-T-59B9
SECTION B
PR: 7012983738 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/12/2026 Original Required Delivery Date:12/07/2026
SPE4A6-26-T-59B9 NSN/Part Number: 6610-00-070-0014 Quantity: 11 EA Purchase Request: 7012983738QTY: 11 Delivery: 294 days ADO