Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

John Day STS Roller Chain for Fish Screens

Closed
W9127N26QA157Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333613
New
SLED
Marine Mechanical Rigging and Steering ContractorThe Marine Mechanical Rigging and Steering Contractor subcontract involves the physical removal of existing propulsion and the installation of new engines for boat repower projects managed by the Confederated Tribes of the Colville Reservation. The scope of work includes decommissioning Honda BF250A engines, mounting new engines with marine stainless steel hardware and sealant, and interfacing the propulsion systems with SeaStar PA1315-2 Marine Hydraulic PRO Power Assist Steering Units. Qualified contractors must hold a marine mechanical certification to deliver fully installed propulsion and steering systems. This opportunity was posted on October 20, 2026, with a response deadline of November 13, 2026. The project falls under NAICS code 333613 and is intended for those capable of supporting prime contractors on these specific marine upgrades.
Confederated Tribes of the Colville Reservation

POSTED

about 5 hours ago

DEADLINE

in 23 days
NAICS: 333613
New
Federal
30--GEARSHAFT,MULTIPLE GEA
Solicitation # SPE7LX27U0267
DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

in 15 days
NAICS: 333613
New
Federal
30--CONNECTING LINK,RIG
Solicitation # SPE7L127T1835
DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

in 13 days
NAICS: 333613
New
Federal
30--GEAR,SPUR
Solicitation # SPE7L127T1837
DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

in 13 days
NAICS: 333613
New
Federal
30--SHAFT ASSEMBLY,SHOULDE
Solicitation # SPE7L127Q0082
DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

in 9 days
NAICS: 333613
New
Federal
25--DRIVE SHAFT ASSEMBLY,C
Solicitation # SPE7LX27U0285
DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

in 15 days
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Palletization ServicesThis subcontract for the Defense Logistics Agency involves providing specialized military packaging, marking, and palletization services for power supply units. The contractor is responsible for ensuring all items are processed according to RP001 and MIL-STD-2073-1E standards, with container marking adhering to MIL-STD-129 and MIL-STD-130N. All deliverables must utilize MIL-SPEC materials and DLA-approved pallets to ensure they are ready for final agency acceptance. The opportunity is categorized under NAICS code 333613 and was posted on October 19, 2026, with a response deadline of October 30, 2026. The scope of work focuses on supporting prime contractors to meet strict Department of Defense requirements for the transport and storage of critical military components.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Supply of Groove PulleysThis subcontract involves the supply of six groove pulleys for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The provider is responsible for manufacturing or sourcing pulleys that strictly meet NSN specifications, ensuring all items are delivered to Chambersburg, Pennsylvania. Compliance is a critical component of this agreement, requiring adherence to the Buy American Act and DFARS cybersecurity reporting standards. Additionally, all shipments must follow RP001 palletization guidelines and MIL-STD-129 labeling requirements to ensure proper identification and handling within the Department of Defense supply chain.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors delivering aerospace components to the Department of Defense. The scope of work involves specialized military packaging and marking in strict accordance with MIL-STD-2073-1E and MIL-STD-129, ensuring all items include necessary National Stock Numbers, contract details, lot numbers, and CAGE codes. Additionally, the provider must execute palletization per RP001 and apply Hazard Warning Labels as required by 29 CFR 1910.1200. The final deliverables are marked and packaged components prepared for FOB Origin shipment to DLA Distribution Jacksonville. This requirement falls under NAICS code 333613 and is managed by the DLA Weapons Support Land Supplier Opns Vehicle SPT. The response deadline for this opportunity is October 30, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Manufacture of Rigid Connecting Links (CSI)This subcontract involves the manufacture of Rigid Connecting Links for prime contractors supporting US Air Force projects under the Department of Defense. The selected provider must fabricate parts in strict accordance with specific technical drawings, including NR 76823 I0Y201 (Rev AG), 76823 2-73226 (Rev F), and 16236 EI-007093694. Due to the nature of the components, the contractor must adhere to Critical Safety Item quality controls and utilize precision machining equipment. Key deliverables include the finished links and the successful execution and certification of a First Article Test as specified in CLIN 0002. The contractor is required to maintain compliance with 29 CFR 1910.1200 safety standards. Performance for this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Piston Ring Supply (NSN 3040015878720)This subcontract involves the supply of precision-manufactured piston rings for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support Land Supply Chain ESOC Buys. The contractor is responsible for manufacturing or sourcing rings that strictly adhere to the DLA Master List of Technical and Quality Requirements, with a specific focus on standards RA001 and RQ011. All deliverables must meet the exact metallurgy and tolerance specifications required for NSN 3040015878720. The performance of this contract is centered in Chambersburg, Pennsylvania, under NAICS code 333613. Interested parties must adhere to the timeline established by the posting date of October 19, 2026, with a final response deadline of October 30, 2026. Delivery of the piston rings is required as specified by the designated part number and National Stock Number.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 333613
New
DIBBS
Supply of Shoulder Pump Shafts for Bomb Lift EquipmentThis subcontract involves the fabrication or sourcing of two shoulder pump shafts, part number 3102211, for use in Air Force Type AS32MK3 Bomb Lift equipment. The project is managed under the DLA Weapons Support Land Supply Chain for prime contractors and strictly prohibits the use of additive manufacturing in the production process. The contractor must ensure all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the provider is required to maintain NIST SP 800-171 compliance and adhere to the Buy American Act. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

Show more

Solicitation W9127N26QA157 is a firm-fixed-price request for quotes issued by the US Army Corps of Engineers Portland District for the procurement of nine complete matched sets of Submerged Traveling Screen roller chains for the John Day Dam. Each set consists of four chains, comprising two left-hand and two right-hand chains, which must be manufactured as Standard ACME C2162H rivet roller chains in compliance with government drawings JDF-84-38-35 and JDF-84-38-36, as well as ANSI B29.4, ASTM A276, and ASTM A564 standards. The acquisition is 100 percent set aside for small business concerns under NAICS Code 333613. The contract requires the delivery of supplies in five phased shipments to the John Day Dam facility in Rufus, Oregon, with the contractor bearing all transportation costs under FOB Destination terms. Technical requirements specify that chains must be shipped dry and without lubrication, packaged to prevent corrosion and deformation, and marked according to MIL-STD-129 and ISO/IEC 16022 standards. All products must comply with Buy American regulations. Quotes are due by 2:00 PM PST on September 3, 2026, and must be submitted via email to John Scukanec. Eligible offerors must be registered in the System for Award Management and provide technical spec sheets or brochures to demonstrate their capability to meet the requirements.

General Info

US Army Corps of Engineers seeks small business quotes for John Day Dam chains.

Agency

Department Of Defense → W071 Endist Portland

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

Rufus, OR, 97050, USA

Set-Aside

SBA

Documents

5

JDF-84-38-35 drawing and parts list

PDF, High priority: read this firstspecifications
High

JDF-84-38-36 Drawing and Installation Instructions

PDF, High priority: read this firstsow
High

PWS – STS Roller Chains, John Day Dam

PDF, High priority: read this first7 pages · sow
High

W9127N26QA157 Pricing Table - JD STS Roller Chain

PDF, High priority: read this first1 page · rfq
High

W9127N26QA157 – Solicitation for John Day STS Roller Chain

PDF, High priority: read this first45 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W071 Endist Portland
Contacts2 people available
OfficePORTLAND, OR, 97204-3495, USA
Organization / AgencyDepartment Of Defense → W071 Endist Portland
Office AddressPORTLAND, OR, 97204-3495, USA
Contacts
John Scukanec
contact@example.gov
+1 (555) 000-0000
David C. Boone
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

This is a solicitation for commercial services prepared in accordance with the format in Revolutionary Far Overhaul (RFO) Part 12.202(b).


Solicitation W9127N26QA157 is issued as an RFQ for the purchase of roller chains to be used on the Submerged Traveling Screen (STS) system at John Day Dam. The roller chains will be manufactured, packaged, shipped, and delivered as complete matched chain sets compliant with provided part drawings.


This acquisition is 100% set aside for small business concerns. This solicitation incorporates provisions and clauses by reference. Details regarding submittal instructions for this requirement can be found in Clause 52.212-1 of the solicitation. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.


This solicitation is issued under NAICS Code 333613 - Mechanical Power Transmission Equipment Manufacturing with a size standard of 750 employees. All prospective offerors must be registered in the System for Award Management (SAM) at www.sam.gov to be eligible to quote/receive an award.


Quotes are to be submitted to john.r.scukanec@usace.army.mil, NLT 2:00 PM PST on 3 SEP 2026. Please submit any questions to John Scukanec through email. All questions related to this solicitation must be submitted in writing to John Scukanec, questions will not be responded to by phone.


Issued By: US ARMY CORPS OF ENGINEERS (USACE) Portland District (NWP)

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

NAICS: 237310
New
Federal
Bonneville Lock and Dam - Navigation Lock 1 Bridge Replacement
Solicitation # W9127N26BA024
The Bonneville Lock and Dam Navigation Lock 1 Bridge Replacement project in Cascade Locks, Oregon, is a total small business set-aside procurement issued by the USACE Portland District. The project involves replacing a seismically deficient 248-foot swing bridge with a new single-span steel girder bridge featuring a concrete deck, two travel lanes, shoulders, and a sidewalk. The scope includes partial demolition of the existing structure, construction of a concrete stub abutment anchored into rock and a south abutment supported by drilled shafts, and the development of approach roadways. Due to the requirement for continuous vehicular access, the work will likely be performed in phases and must adhere to strict environmental and seasonal restrictions, including specific in-water work windows for 2029 and 2030. The contract is a firm-fixed price agreement with a performance period of 1,295 calendar days from the notice to proceed. Key technical requirements include lead and asbestos removal, barge crane lifting near high-voltage power lines, and compliance with CMMC Level 1 cybersecurity standards. Specialized qualifications are required for ground anchors, jet grouting, and professional archaeological monitoring. The project is subject to rigorous quality control and inspection processes, including a three-stage sequence of punch-out, pre-final, and final acceptance inspections. Bidders must provide a bid guarantee and 100 percent performance and payment bonds. The final solicitation closing date was extended to October 29, 2026.
Highway, Street, and Bridge Construction

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 541380
Federal
TDA Isolated Phase Bus and Duct Inspection
Solicitation # W9127N27QA002
Solicitation W9127N27QA002 is a Request for Quote issued by the U.S. Army Corps of Engineers, Portland District, for commercial services at The Dalles Lock and Dam. The project scope involves testing the condition of the Isolated Phase Bus and Duct System, as well as the abatement and off-site disposal of approximately 100 to 150 lbs of asbestos-containing material from hatch panel doors. This requirement is a 100 percent small business set-aside under NAICS code 541380. The period of performance is scheduled from February 1, 2027, to April 16, 2027. Quotes are evaluated based on technical capability, requiring the submission of spec sheets or brochures to demonstrate the ability to meet government requirements. Offerors must be registered in the System for Award Management and possess a CMMC Level 2 self-verification to access reference drawings. The solicitation includes strict adherence to USACE safety standards, specifically EM-385-1-1 and hazardous energy control procedures. Following amendments, the final response deadline is October 28, 2026. Award is based on a firm-fixed-price structure across three line items covering general services, asbestos abatement setup, and asbestos disposal.
Testing Laboratories and Services

POSTED

13 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
Federal
Heavy Machinery Transport (Overweight/Oversize)This small business set-aside subcontract involves providing on-call heavy-lift transportation services for prime contractors working on USACE Endist Portland projects. The scope of work focuses on moving machinery weighing between 20 and 60 tons, with specific performance requirements in Cascade Locks. The contractor is responsible for the safe delivery of equipment to designated drop-off points and must manage all necessary overweight and oversize permits for public highway travel between the Oregon and Washington shores. To qualify, the provider must possess heavy-duty tractors and specialized heavy-haul trailers, such as low-boys and removable goosenecks. Personnel are required to hold a commercial driver's license with the appropriate oversized endorsements. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

14 days ago

DEADLINE

in 1 day
View Details
NAICS: 484220
Federal
Light and Medium Duty Equipment HaulingThis subcontract opportunity involves providing on-call light and medium duty equipment hauling services for prime contractors on USACE Endist Portland projects. The selected provider will be responsible for transporting equipment weighing between 1.5 and 20 tons between Cascade Locks on the Oregon Shore and North Bonneville on the Washington Shore. All transport must be conducted via public highways and authorized river crossings, ensuring safe delivery to designated drop-off points. Qualified contractors must utilize flatbed trucks, tilt-decks, or tow trucks and ensure all operators possess valid CDL licenses. This opportunity is designated as a total Small Business Set Aside under NAICS code 484220. Interested parties must submit their responses by October 21, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

14 days ago

DEADLINE

in 1 day
View Details
NAICS: 484220
Federal
Pre-Solicitation Notice - Bonneville Dam Equipment Transport Blanket Purchase Agreement (BPA)
Solicitation # W9127N27A0001
The U.S. Army Corps of Engineers, Northwestern Division, Portland District intends to establish a Blanket Purchase Agreement (BPA) for commercial equipment transport services at the Bonneville Lock and Dam. This 100% small business set-aside, categorized under NAICS 484220, involves the on-call transport of light to heavy-haul equipment, ranging from 1.5 to 60 tons, between facilities on the Oregon and Washington shores via public highways. The agreement will span a five-year ordering period with an estimated annual volume of 60,000 dollars and a total potential value of up to 300,000 dollars. Selected BPA holders will be required to provide DOT-compliant vehicles and manage all route planning, including obtaining necessary permits from local, state, and federal authorities. Performance standards include a standard response time of 48 hours and a best-effort emergency response within 12 hours. For call orders under 2,500 dollars, selection will be based primarily on cost and availability with payment via credit card; orders exceeding 2,500 dollars will be competed among BPA holders and paid via electronic invoice. Contractors must maintain current insurance, adhere to FMCSA securement regulations, and submit a Quality Control Plan for government approval prior to the post-award conference.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

14 days ago

DEADLINE

in 1 day
View Details
NAICS: 237990
Federal
Coos Bay Pier Utilities
Solicitation # W9127N27BA004
The U.S. Army Corps of Engineers Portland District is seeking bids for the Coos Bay Pier Utilities Upgrade in Coos Bay, Oregon. This firm-fixed price construction project involves the removal, replacement, and testing of critical infrastructure, including 300 feet of potable water piping and two 300-foot lines of electrical conduit and cabling for 120V, 240V, and 480V services. Additional requirements include upgrading a shore-based circuit breaker, replacing three light posts, installing plastic lumber railing, and replacing a life ring and floating dock access steps. The project is anticipated to be a small business set-aside under NAICS code 237990, with an estimated construction magnitude between 500,000 and 1,000,000 dollars. The expected period of performance runs from January 1, 2027, through April 30, 2027. The final solicitation is expected to be available around October 28, 2026, with bids due 30 days after advertisement and an optional pre-bid site visit to follow.
Other Heavy and Civil Engineering Construction

POSTED

14 days ago

DEADLINE

N/A
View Details
NAICS: 238220
Federal
John Day Dam Powerhouse HVAC Upgrades
Solicitation # W9127N26BA006
The U.S. Army Corps of Engineers Portland District is seeking a single firm-fixed-price contract for comprehensive HVAC upgrades at the John Day Dam Powerhouse, located across Oregon and Washington. The project involves replacing primary and secondary chillers, installing four new chiller skid packages with approximately 600 tons of refrigeration capacity, and implementing a new automated digital HVAC control system. Key technical requirements include a mix of water-cooled and air-cooled systems, new intake and exhaust ducting for fire smoke propagation prevention, and the installation of mini-split units. The work must be performed within an active powerhouse containing high-voltage electrical equipment and areas prone to water intrusion, with a construction period of 1,004 calendar days. The estimated project magnitude is between 25 million and 100 million dollars under NAICS code 238220. A critical condition for award is compliance with Cybersecurity Maturity Model Certification, specifically CMMC Level 2 (Self) for the prime contractor and appropriate levels for subcontractors based on the type of information processed. The solicitation is expected to be issued as an Invitation for Bids in mid-September 2026, requiring bidders to have an active SAM registration and a current NIST SP 800-171 assessment.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

19 days ago

DEADLINE

N/A
View Details
NAICS: 562910
Federal
ACM Abatement and Disposal (Hatch Panel Doors)This subcontract involves the removal, abatement, and off-site disposal of up to 150 lbs of asbestos-containing gaskets from isolated phase bus hatch panel doors for USACE Portland District projects. The selected contractor will be responsible for implementing full asbestos containment, utilizing required personal protective equipment, and ensuring the transport of hazardous waste to approved facilities via certified means. Final deliverables include the successful removal of the material and the provision of all disposal manifests. Managed under the Department of Defense and the W071 Endist Portland agency, the project falls under NAICS code 562910. A critical compliance requirement for this engagement is CMMC Level 2 self-verification. The response deadline for this opportunity is October 26, 2026, with performance centered in the 97058 zip code area.
Remediation Services

POSTED

21 days ago

DEADLINE

in 6 days
View Details
NAICS: 541380
Federal
Isolated Phase Bus and Duct System TestingThis subcontract opportunity with the Department of Defense, specifically the W071 Endist Portland, involves performing condition testing of the Isolated Phase Bus and Duct System for prime contractors on USACE Portland District projects. The scope of work includes conducting AC High Potential testing in accordance with IEEE C37.23 and performing IR Thermography inspections following NFPA 70E safety protocols. The selected contractor is responsible for providing all necessary High Potential testing equipment and IR thermography cameras, with final deliverables consisting of detailed condition testing reports and inspection results. To qualify for this engagement, IR Technicians must hold a Level II certification and provide CMMC Level 2 self-verification. The project falls under NAICS code 541380 and is located in the 97058 zip code area. Interested parties must submit their responses by the deadline of October 26, 2026.
Testing Laboratories and Services

POSTED

21 days ago

DEADLINE

in 6 days
View Details
NAICS: 541340
Federal
VECTORIZE FORTY-EIGHT (48) .tif DRAWINGS INTO .dwg VECTOR FORMAT
Solicitation # W9127N26QA141
The U.S. Army Corps of Engineers, Northwestern Division, Portland District, plans to award a firm-fixed price contract to vectorize 48 single-page scanned .tif engineering drawings into editable .dwg AutoCAD format, with no conversion through intermediate programs permitted. The drawings include site plans, building plans, elevations, and detailed technical illustrations covering civil, structural, mechanical, and electrical disciplines, some containing schedules and manual text. This acquisition is strictly a 100% Small Business set-aside under NAICS code 541340 with a size standard of $9.0 million, targeting vendors capable of precise CAD conversion services. The solicitation will be issued on or about August 11, 2026, with responses due by August 26, 2026, and award anticipated on August 28, 2026, under a 30-day performance timeline. The government may issue quotations directly to interested vendors below the simplified acquisition threshold via email, provided they register interest with the designated contacts. If competition is insufficient, the request will be posted to SAM.gov. All work must be performed to ensure full AutoCAD compatibility and precision, with no re-creation or indirect translation allowed.
Drafting Services

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541340
Federal
Quality Control and Inspection Services
Drafting Services

POSTED

9 months ago

DEADLINE

N/A
View Details
NAICS: 238220
Federal
Outlet Works Sealing and Decommissioning
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

9 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS