This Government Contract opportunity from Department Of Defense was posted on July 22, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

JOHN DAY TRASH RAKE GANTRY CRANE

Awarded

W9127N19R0021Federal

Submission Closed07/19/2019, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333923

New

DIBBS

Supply of Multiple Leg Slings (NSN 3940-01-538-1768)This subcontract involves the procurement of seven multiple leg slings, identified by NSN 3940-01-538-1768, to support prime contractors on Department of Defense supply contracts. The selected provider is responsible for sourcing the units and ensuring all items are packaged according to MIL-STD-2073-1E and palletized in accordance with RP001 DLA Packaging Requirements. The contract requires strict adherence to Trade Agreements Act certifications to ensure all deliverables are designated country end products. All seven packaged and palletized slings must be delivered within 92 days after the order is placed.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Cargo Sling (Net) ManufacturerThis subcontract involves the manufacture and supply of two specialized cargo slings, identified by NSN 3940-01-673-3951, for prime contractors fulfilling Department of Defense supply contracts. The fabrication process must strictly adhere to Technical Drawing NR 81996 1046831, Revision A and TDP Rev A Gen 1 to ensure technical compliance. The contractor is responsible for meeting rigorous military standards for delivery, including MIL-STD-129 Special Marking Code 32 for marking, MIL-STD-2073-1E for packaging, and RP0001 for palletization. This requirement falls under NAICS code 333923 and is managed through the Defense Logistics Agency.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0123

Solicitation SPE8EE-27-T-0123, issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, is a request for quotations for five wire rope hoists under NSN 3950-01-645-4757. The procurement falls under NAICS code 333923 and requires delivery to DLA Distribution San Diego within 159 days after order. The contract is FOB Origin, with inspection and acceptance occurring at the destination per FAR 52.246-1. Vendors who are not the Original Equipment Manufacturer must provide a quotation from an authorized distributor verifying that the products are new, genuine OEM material. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and utilizes the HUBZone price evaluation preference. Compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization is mandatory. Additionally, the contract requires adherence to the Buy American Act, DFARS 252.204-7012 for safeguarding covered defense information, and the use of the Wide Area WorkFlow system for all invoicing and receiving reports.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

SPRMM1-26-Q-GC63-CHAIN HOIST

Solicitation # SPRMM1-26-Q-GC63

Solicitation SPRMM1-26-Q-GC63 is a request for quotations issued by DLA Mechanicsburg for the procurement of two chain hoists, identified by NSN 7HH 3950-01-702-6959 and reference number 8196788-2. This is a high-priority requirement supporting a US Navy CASREP due to mission-essential equipment breakdown, necessitating ASAP delivery on an FOB Destination basis. The procurement falls under NAICS code 333923 and is not a small business set-aside. The contractor is responsible for ensuring all supplies are new and unused, with packaging and marking strictly adhering to MIL-STD-2073, MIL-STD-129, and MIL-STD-130 standards. Any hazardous materials must be accompanied by GHS-compliant labels and Safety Data Sheets submitted to NAVSUP WSS. Technical evaluation will focus on the ability to provide the exact NSN and part number, with alternate products generally not considered unless specific savings thresholds are met. Invoicing and receiving reports must be processed electronically through the PIE-WAWF system.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPE7L5-27-T-0243

Solicitation SPE7L5-27-T-0243 is a fixed-price requirement issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of 17 units of Hoisting Adapters, identified by NSN 3940-01-676-4127. The contract is open for full and open competition with a response deadline of October 29, 2026. Delivery is required within 130 days after the award, with a need ship date of March 9, 2027, and terms set as FOB Origin. Inspection and acceptance will occur at the destination. The procurement includes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Contractors must adhere to the DLA Master List of Technical and Quality Requirements and specific packaging standards such as ASTM D3951 and MIL-STD-129. Additionally, a restricted technical data package from Oshkosh Defense, LLC is associated with this item, requiring a signed license agreement for access. The award process may be automated, and a price evaluation preference is available for certified HUBZone small business concerns. Invoicing must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

MMO REPLACE WRECKED 3095 ELLIOTT CRANE, EO 14398The Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the replacement of a wrecked 3095 Elliott Crane under EO 14398. This procurement action is categorized under NAICS code 333923, which pertains to the manufacturing of other metal fabricating machinery. The forecast was posted on October 18, 2026, and is intended to notify potential vendors of the upcoming requirement. Interested parties may coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

PURCHASE BUCKET TRUCK WITH AERIAL MANLIFT FOR RAPID CITY LINE CREW, EO 14398The Western Area Power Administration, under the Department of Energy, is forecasting the purchase of a bucket truck equipped with an aerial manlift to support the Rapid City line crew. This procurement falls under NAICS code 333923 and is intended for performance in California. The opportunity is currently listed as a forecast with a posted date of October 18, 2026. Interested parties may coordinate with the Small Business Program Managers for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

Supply of Chain Hoists (NSN 3950-01-435-2897)This subcontract involves the supply of 19 chain hoists, identified by NSN 3950-01-435-2897, to support prime contractors on DLA Troop Support supply contracts. The equipment must strictly adhere to the DLA Master List of Technical and Quality Requirements, ensuring zero mercury content and full compliance with the Buy American Act. All units are required to be marked according to MIL-STD-129 and packaged in accordance with MIL-STD-2073-1E. The contract is managed under NAICS code 333923 for the Department of Defense. The final delivery of the 19 units is designated for DLA Distribution Puget Sound, with the place of performance located in Bremerton, Washington.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-1765

Solicitation SPE8EE-26-T-1765 is a fixed-price procurement issued by the Department of Defense, specifically DLA Troop Support, for 19 units of chain hoists under NSN 3950-01-435-2897. The acquisition is conducted under the First Destination Transportation program with delivery terms set as FOB Origin. The items are to be delivered to DLA Distribution Puget Sound in Bremerton, Washington, with a delivery period of 167 days and a required delivery date of November 9, 2026. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance with the Buy American Act and various DFARS cybersecurity and safeguarding regulations is required. Payment must be processed electronically through the Wide Area Workflow system. Offerors proposing alternate parts must provide a complete data package for evaluation, as the agency does not possess adequate data for alternate part assessment.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Nashville Electric Service is soliciting bids under solicitation Z5388 for the procurement of 15 units of 2 ton capacity lineman's hoists. The required equipment must feature a nylon or polyester web strap, a fiberglass handle with overload detection, interlocking pawls, a wind up wheel, and safety hooks. All units must strictly adhere to the ANSI/ASME Standard B-30.21. Only Lugall C 4-A or Duff-Nor Little Mule 344C DBL Line models are acceptable, as alternate brands will not be considered for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on the published close date of October 23, 2026. Vendors are required to specify their earliest delivery time in calendar days, which may be a determining factor in the award decision. The primary procurement contact for this solicitation is Kyle Kegley, Buyer II. It is the responsibility of the vendor to resolve any discrepancies between part numbers and descriptions with the buyer prior to the closing date.

Nashville Electric Service

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0193

Solicitation SPE8EE-27-T-0193 is a fixed-price contract issued by the Department of Defense, specifically DLA Troop Support, for the procurement of four crane adapter kits under NSN 3950-01-479-8834. The kits must be manufactured according to specific technical data package drawings, including reference drawing 19207 57K4206. The required delivery date is August 10, 2026, with a delivery window of 10 days after award. Shipping is designated as FOB Origin, with delivery and inspection points located at destination facilities in Santa Rosa, California. The contract mandates strict adherence to quality and packaging standards, requiring the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging requirements. The award includes specialty metal requirements and domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with cybersecurity standards for safeguarding covered defense information. Price evaluation preferences are available for certified HUBZone small businesses.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

ROLLER, DIAMETER SENSOR

Solicitation # SPE7M4-27-T-1347

Solicitation SPE7M4-27-T-1347 is issued by the DLA Weapons Support Fluid Handling Division for the procurement of one Roller Diameter Sensor, identified by NSN 2030-01-199-7707. The item is designated for delivery to the USS Winston S Churchill DDG 81 at FPO AE 09591, with a required delivery date of October 14, 2026. The procurement is governed by NAICS code 333923 and requires destination inspection, with manufacturer quality systems needing to comply with SAE AS9003 or ISO 9001. This contract contains stringent security and regulatory requirements, including CMMC Level 2 certification and strict export controls under ITAR and EAR. Technical data is restricted, and access requires an approved US/Canada Joint Certification Program certification and specific DLA authorizations. Additionally, the contract mandates compliance with the Buy American Act and the Berry Amendment. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and mandatory registration in the System for Award Management.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

5 days ago

DEADLINE

in 6 days

AI Contract Overview

This procurement involves the replacement of a 15 Ton Trash Rake Cantilevered Gantry crane with a new 20 Ton Trash Rake Gantry Crane at the John Day Lock and Dam Project near Rufus, Oregon. The contractor is responsible for the design, manufacture, installation, testing, and commissioning of the new crane, ensuring it operates on both primary shore power and emergency diesel generator power. The crane is critical for cleaning trash racks for generating units and handling racks for maintenance across 16 main generating units. A primary constraint of the project is that the powerhouse must maintain an operational trash rake gantry crane at all times, meaning the new system must be fully commissioned before the existing crane is demolished. The scope of work includes the removal of the old crane, which contains lead-based paint and asbestos-containing materials. Access to the site is available via John Day Dam Road or by barge from the upstream side.

General Info

Agency

Department Of Defense → W071 Endist Portland

Contract Value

$5,609,971

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

Place of Performance

John Day Lock and Dam Project, RUFUS, OR, 97050, USA

Set-Aside

NONE

Awardee

KNIGHT CONST. & SUPPLY, INC

Award Issued Date

07/18/2019, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

7 updates

PhaseAwarded

PostedSep 19

Presolicitation

Notice updatedOct 17

The notice description changed.

Notice updatedNov 9

Response deadline changed from Nov 14, 2018 to Dec 12, 2018. The notice description changed. The point of contact changed.

Notice updatedNov 19

The notice description changed.

Notice updatedDec 4

Response deadline changed from Dec 12, 2018 to Jan 16, 2019. The notice description changed.

Notice updatedDec 7

The notice description changed.

Notice updatedDec 20

Notice details unchanged. Attachments may have changed.

Notice updatedDec 21

Notice details unchanged. Attachments may have changed.

Type ChangedJan 4

Presolicitation → Solicitation

AwardedJul 18

Contract was awarded

Submission Closed

07/19/2019, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W071 Endist Portland

Contacts2 people available

OfficePORTLAND, OR, 97204-3495, USA

Organization / AgencyDepartment Of Defense → W071 Endist Portland

Office AddressPORTLAND, OR, 97204-3495, USA

Contacts

Kim KovarContracting Officer

contact@example.gov

+1 (555) 000-0000

Melanie A. BarrettContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

John Day Trash Rake Crane This procurement consists of replacing the existing 15 Ton Trash Rake Cantilevered Gantry crane with a new 20 Ton Trash Rake Gantry Crane at the John Day Lock and Dam Project located near Rufus, Oregon. The Trash Rake Cantilevered Gantry Crane provides for the cleaning of the trash rack for the generating units at John Day. The crane also provides a secondary function for handling and removing the trash racks as required for maintenance on each of the 16 main generating units. The contractor must design, manufacture, install, test, and commission the new trash rake crane on both primary shore power and emergency diesel generator power." The new trash rake crane must be fully commissioned and operational prior to demolition of the existing trash rake crane. The work must include the removal of the existing trash rake crane which is known to have asbestos containing material and lead based paint. The work site is located at John Day Lock and Dam. Contractor access to the work site will be from Exit 109 off Interstate 84 onto John Day Dam Road; follow frontage road eastward for two miles to the security gate check point or if necessary for installation via barge from the upstream side. Known Constraints: At no time during the project shall the powerhouse be without an operational trash rake gantry crane. The Corps of Engineers will ensure operability of the existing trash rake crane.