Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

KETTLE, STEAM JACKETED

Active
SPE3SE-26-T-1098Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two steam-jacketed kettles operating at 440V, identified by NSN 7310-01-588-4050, under solicitation SPE3SE-26-T-1098, with a total small business set-aside classification. Delivery is required within 20 days of award, and the place of performance is specified as San Diego, California, with a delivery address of 92136. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision controls based on solicitation or award date, depending on acquisition size. The item must comply with MIL-STD-130N for identification marking of U.S. military property and is exempt from Class I ozone-depleting substances. Packaging must adhere to DLA packaging standards, and government identification must be removed from non-accepted supplies. Covered defense information provisions may apply, and no technical data package is available from DLA Troop Support, so requests for such documentation are prohibited. The contract is under the Department of Defense, managed by the Subsistence FSE Supply Chain, with Ellina Entin listed as the primary point of contact. The solicitation was posted on August 4, 2026, and responses are due by August 10, 2026, through the DIBBS system.

General Info

Procure two 440V steam-jacketed kettles, deliver to San Diego within 20 days, comply with MIL-STD-130N and DLA standards.

Agency

Department Of Defense → SUBSISTENCE FSE SUPPLY CHAINView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

3581 CUMMINGS RD BLDG 3581, SAN DIEGO, CA, 92136, US

Set-Aside

SBA

Documents

(1)

SPE3SE-26-T-1098.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SUBSISTENCE FSE SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Ellina Entin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
KETTLE,STEAM JACKETED
KETTLE,STEAM JACKET 440V
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THIS ITEM DOES NOT REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES PER DLA MEETING, 3-4 AUG 93, SUBJECT: DLA TECHNICAL/STANDARDIZATION MEETING ON AUTHORITY TO IMPROVE CUSTOMER SUPPORT.
DLA TROOP SUPPORT DOES NOT CURRENTLY HAVE AN APPROVED TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN. PLEASE DO NOT SUBMIT REQUEST TO DLA TROOP SUPPORT TECHNICAL DATA SUPPORT TEAM. NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 7310-01-588-4050 Quantity: 2 AY Purchase Request: 7017733311QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FILLER NECK, VEHICUL
Solicitation # SPE7L1-26-T-707C
The contract is for a FILLER NECK, VEHICUL with NSN/Part Number 2590-01-692-3152, issued under solicitation number SPE7L1-26-T-707C by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline of June 26, 2026, and seeks a single unit as specified in purchase request 7017156287. The action falls under NAICS code 332919, indicating it relates to miscellaneous fabricated metal product manufacturing, and is classified as a federal procurement with no specific set-aside provisions. Performance location and point of contact details are not provided, and the procurement is hosted on the DIBBS platform for solicitation management.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
CRADLE, WEIGHING
Solicitation # SPE7M4-26-T-299N
The contract pertains to the procurement of two CRADLE, WEIGHING units under solicitation SPE7M4-26-T-299N, with a delivery requirement of 20 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with a valid US/Canada Joint Certification Program certification, completion of required DOD export control training, and approval from the DLA controlling authority may access the controlled data. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the North American Industry Classification System code is 333310. The place of performance is Keyport, WA, 98345-7610, and the contract is managed by the Fluid Handling Division of the Department of Defense. The primary point of contact is Rory O’Reilly, reachable via email and phone provided. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization to meet cybersecurity requirements.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
MANDREL, DENTAL HANDPIE
Solicitation # SPE2DS-26-T-308S
The contract pertains to the procurement of a straight screw head mandrel designed for use with screw-in type abrasive disks and wheels in dental handpieces, identified by NSN 6520-01-568-0437 and sold in packages of 12 units. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. Packaging must comply with DLA standards, and all supplies must be free of government identification if rejected. Mercury or mercury-containing compounds are strictly prohibited in the product unless specifically exempted for functional components like batteries, fluorescent lights, or regulated instruments, and any permitted mercury-containing portable devices must include shock-proof design and secondary containment as per NAVSEA 5100-003D. Bidders are required to clearly state the source and part number being supplied. The contract was issued under solicitation SPE2DS-26-T-308S by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a response deadline of August 10, 2026, and delivery required within 20 days of award to FPO, ZIP 09577. The point of contact is Olusola Emmanuel, reachable via email and phone provided, and the NAICS code 333310 classifies this as medical, dental, and ophthalmic equipment manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333310
New
DIBBS
INDICATOR, TEMPERATURE,
Solicitation # SPE4A5-26-T-322V
The contract pertains to the procurement of six temperature indicators with electrical resistance, identified by NSN 6685-01-169-8130 and part number 15297 from Electro Impulse Laboratory Inc, under solicitation SPE4A5-26-T-322V. Delivery is required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California, with FOB origin terms and zero tolerance for quantity variance. The items must comply with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific DLA packaging requirements, including special marking code 05 indicating a delicate instrument. All packaging, preservation, and marking materials must be free of mercury or mercury-containing compounds, except where explicitly permitted for functional components such as batteries or sensors as defined by NAVSEA, and portable devices containing mercury must include double containment and be shock-proof per NAVSEA 5100-003D. Sampling and inspection protocols follow MIL-STD-1916 or comparable zero-based plans with acceptance criteria of zero non-conformances unless otherwise stated, and critical attributes are subject to verification levels VII or AQL 0.1. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size, and the unit of issue is standardized per ANSI X12. The required delivery date is March 24, 2027, with a need ship date of January 31, 2027, and all transportation logistics must adhere to DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
DIBBS
SPACER, PLATE
Solicitation # SPE7L3-26-T-146V
The contract requires the delivery of two spacer plates, identified by NSN 2590-01-659-7891, under solicitation SPE7L3-26-T-146V, with a total quantity of two units priced at $2.00 per unit, totaling $4.00. Delivery must be completed within 20 days from the date of award, with FOB destination terms applying, and no variance is permitted in quantity. Inspection and acceptance both occur at the origin point, and packaging must conform to MIL-STD-2073-1E with specific preservation methods including dry preservation, no protective coating or cushioning materials, and unit packaging in accordance with OPI O and intermediate container E5. Marking must comply with MIL-STD-129 without any special markings, and palletization must follow DLA’s RP001 packaging requirements. The shipment is directed to FPO AP 96660, addressed to USS ASHLAND LSD 48, and parcel post is explicitly prohibited—shipment must be sent by the fastest traceable means. The required delivery date is December 18, 2025, and the contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with Lee Miller as the point of contact. The NAICS code is 333310, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
GAGE, TIRE PRESSURE,
Solicitation # SPE7LX-26-U-9226
This contract specifies the procurement of tire pressure gages meeting strict technical and packaging requirements under the Department of Defense’s DLA system. The gages must have an inflation range of 10 to 160 PSIG, feature a dual-chuck design with a long extension and external indicating capability, and adhere to the Commercial Item Description for self-contained and inflator gages for pneumatic tires. The indicator bar must be at least .250 inches square with calibrated graduations on all four sides: inch-pound markings in 2 PSI increments every 10 PSI from 10 to 160 PSIG in black, and metric markings in 20 KPa increments every 100 KPa from 80 to 1100 KPa in red, ensuring readability when held with the dual chuck upward. The gages must be constructed of corrosion-resistant materials such as stainless steel or brass, and are designated as a critical application item. All components must comply with DLA Master List technical requirements referenced by R and I numbers, and sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, even when using MIL-STD-105/ASQ Z1.4 for lot size determination. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the gages or their contact surfaces, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, wrapping, and storage codes, and marking must follow MIL-STD-129 without special markings. The product is identified by NSN 4910-00-204-3170 and part number AA59568-002-B-3, with a required delivery in 116 days FOB origin, a quantity of 1,187 units, and zero variance allowed. Procurement is under a Service-Disabled Veteran-Owned Small Business Set-Aside, with inspection and acceptance occurring at destination, and all preservation, packaging, and marking activities strictly exclude mercury or mercury compounds.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
PANEL, HOUSING, SECTI
Solicitation # SPE7L3-26-T-147D
The contract pertains to a PANEL, HOUSING, SECTI with NSN 2590-01-687-7510, requiring one unit for delivery within 20 days of award under Purchase Request 7017730998. The solicitation number is SPE7L3-26-T-147D, posted on August 4, 2026, with a response deadline of August 17, 2026. The item falls under NAICS code 333310 and is managed by the Department of Defense through the Land Supplier Ops Vehicle Support agency, with performance occurring at Fort Stewart, Georgia. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization to qualify. Technical data associated with this item is subject to strict export controls under ITAR or EAR, prohibiting any disclosure to foreign persons, whether inside or outside the U.S., without prior authorization from the Department of State or Commerce. Access to this data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. These requirements are enforced under DFARS 252.225-7048. The point of contact for inquiries is Lee Miller, reachable via email and phone provided in the contract details.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
OPTICAL COMPONENT A
Solicitation # SPE7L7-26-T-3568
The contract pertains to the procurement of two units of Optical Component Assembly designated by NSN 6650-14-529-4067 under solicitation SPE7L7-26-T-3568, with a delivery requirement of 288 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revisions controlled based on the type of acquisition—simplified acquisitions use the revision in effect on the solicitation issue or award date, while large acquisitions rely on the RFP issue date unless an amendment supersedes it. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Physical identification and bare item marking requirements are undefined, and the alternate offeror must submit a complete data package covering both the approved and alternate part. The contract is managed by DLA Dist San Joaquin, with performance located in Tracy, California, and the primary point of contact is Kurt Becka.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
COVER, VACUUM TEST
Solicitation # SPE7M4-26-T-299L
The contract encompasses the procurement of three vacuum test covers identified by NSN/Part Number 4921-00-895-7026, with a delivery requirement of 20 days after order placement. The solicitation, issued under SPE7M4-26-T-299L, is open to full and open competition and falls under NAICS code 333310, indicating it relates to plumbing and heating equipment and commercial-type air conditioning. The item must comply with stringent cybersecurity requirements as the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization and handle Covered Defense Information in accordance with applicable standards. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The contract imposes strict limitations on materials and data handling. Ozone-depleting chemicals are explicitly prohibited, and any substitute chemicals must be submitted for approval unless already authorized by specification. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, including foreign nationals in the U.S. and subsidiaries. Access to such data is restricted to contractors who hold valid JCP certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have been formally approved by DLA. Packaging must adhere to DLA procurement standards, and government identification must be removed from non-accepted supplies. Performance is scheduled for Keyport, WA, and inquiries should be directed to Rory O’Reilly at the provided contact details.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
GAGE, COMPOUND PRESSURE
Solicitation # SPE4A6-26-T-11TN
This contract specifies the procurement of two dial indicating compound pressure-vacuum gages with a nickel copper alloy diaphragm, 1/4 inch NPT gauge connection, saddle type process connection, 3 inch diameter pipe, filled with low temperature silicone and calibrated, identified by part number EA24-3CB4-RWBX D19-10 and NSN 6685-01-156-4640. The supplier, Monarch Supply Co Inc, must comply with strict technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, including zero non-conformances in sampling unless otherwise stated, and adherence to MIL-STD-1916 or ASQ H1331 for inspection. The gages must not contain mercury or mercury compounds in any component or direct contact, except for specific functional applications such as instruments or sensors authorized by NAVSEA, and portable devices must include a secondary containment boundary. All items must be packaged per MIL-STD-2073-1E, marked per MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletized according to DLA packaging requirements. No mercury or mercury compounds may be used in preservation, packaging, or marking. The delivery is FOB origin with no quantity variance allowed, and the inspection and acceptance points are at the destination. The required delivery date is December 2, 2026, with a need ship date of January 31, 2027, and the items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
DIBBS
EXTRACTOR, INSERT SE
Solicitation # SPE7M4-26-T-299H
The contract pertains to the procurement of three Extractor, Insert SE units under solicitation SPE7M4-26-T-299H, with a required delivery within 20 days of award. The item is classified under NAICS code 333310 and is managed by the Fluid Handling Division of the Department of Defense. Technical data associated with this item is subject to export control under ITAR or EAR, restricting its disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Only contractors certified under the US/Canada Joint Certification Program, having completed mandatory DOD export control training and approved by DLA, may access this controlled data. The contractor must also be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring cybersecurity compliance standards are met. All responses are due by August 17, 2026, and performance is to occur in Keyport, Washington, 98345-7610. Primary point of contact is Rory O'Reilly, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

Same awarding agency

NAICS: 333415
New
DIBBS
REFRIGERATOR, MECHAN
Solicitation # SPE3SE-26-Q-0424
Mercury and mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with any hardware or supplies furnished under this contract, except for functional uses in batteries, fluorescent lights, specific instruments, sensors or controls, weapon systems, and chemical analysis reagents explicitly authorized by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury must be shockproof and feature a second boundary of containment for the mercury or mercury compound, in accordance with NAVSEA 5100-003D. The refrigerator, mechanical, identified by NSN 4110-01-505-3438, is the sole item under this contract, with a firm fixed price and no tolerance for quantity variance. Delivery is required within 30 days after award, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging requirements. The item must be delivered to USS Montana SSN 794, with transportation details governed by DLAD Procurement Notes C19 and C20. All items must be uniquely identified per DoD standards with a two-dimensional data matrix marking containing enterprise identifier, serial number, and other required data elements, registered in the DoD Item Unique Identification Registry. The contractor must submit detailed identification and valuation data at delivery, including government unit acquisition cost and serialization method, and must include these requirements in subcontracts where applicable. Additionally, the contract enforces compliance with Buy American provisions, specialty metal restrictions, export controls, antiterrorism training, whistleblower protections, fraud hotline poster display, and sustainable procurement policies, while prohibiting use of flammable refrigerants like R290A in shipboard food service equipment—only R134A and R404A are approved. Documentation for supply chain traceability must be retained by the contractor, and any superseded part numbers must be properly managed.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333241
New
DIBBS
DRAIN HANDLE ASSY
Solicitation # SPE3SE-26-T-1096
The contract pertains to the procurement of a DRAIN HANDLE ASSY with NSN 7320-01-523-8583 and part number 1169-21, supplied by INSINGER MACHINE CO under purchase request 7017638254. One unit is required to be delivered within 20 days FOB destination, with no tolerance for quantity variance. All packaging must comply with ASTM D3951, but is subject to precedence by the DLA Master List of Technical and Quality Requirements, which mandates adherence to MIL-STD-129 for marking and labeling. The item is to be palletized per DLA Packaging Requirements and shipped to the specified FPO address for USS SAN DIEGO LPD 22. Transportation protocols follow DLAD Proc Notes C19 and C20, and the shipment is designated under RDD 777. Delivery is required by July 30, 2026, and the contract was issued under solicitation SPE3SE-26-T-1096 with a response deadline of August 10, 2026. The item falls under NAICS code 333241 and is managed by the Department of Defense’s Subsistence FSE Supply Chain, with Joseph Pineiro listed as the primary point of contact. All government identification must be removed from non-accepted supplies, and covered defense information provisions apply. The unit of issue is each, with the purchase price listed as a single unit at $1.00, totaling $1.00.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
RACK, COMMERCIAL DIS
Solicitation # SPE3SE-26-T-1101
The contract is for the procurement of eight commercial dishwashing machine racks, identified by NSN 7320-00-926-6657, under solicitation SPE3SE-26-T-1101, issued by the Department of Defense’s Subsistence FSE Supply Chain. Delivery is required within five days of award, with the solicitation posted on August 4, 2026, and responses due by August 10, 2026. The item is acquired under a fully competitive process in accordance with applicable military or federal specifications, and technical and quality requirements referenced by R or I numbers are controlled by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on procurement size. The use of Class I ozone-depleting substances is prohibited, and government identification must be removed from any non-accepted supplies. Performance is designated for Pascagoula, Mississippi, 39567, with Joseph Pineiro as the primary point of contact for inquiries.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
MEAT SLICING MACHIN
Solicitation # SPE3SE-26-T-1092
The contract pertains to the procurement of one meat slicing machine identified by NSN 7320-01-508-5936 under solicitation SPE3SE-26-T-1092, with a required delivery within 20 days of award and a firm fixed price of one unit. The item must be delivered FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for labeling and marking. The equipment must be palletized according to DLA packaging standards and must not contain mercury or mercury-containing compounds except for specific exempted applications such as functional batteries, fluorescent lights, or authorized instruments, with portable devices containing mercury requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The delivery address is a Navy vessel unit at FPO AP 96678, and transportation logistics must follow DLAD Procedure Notes C19 and C20. The machine is intended for government use only, with no set-aside classification, and the North American Industry Classification System code is 333241 under the Department of Defense’s Subsistence FSE Supply Chain. The point of contact for inquiries is Ellina Entin, and the contract was posted on August 4, 2026, with responses due by August 10, 2026.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
MEAT SLICING MACHIN
Solicitation # SPE3SE-26-T-1093
The contract pertains to the procurement of a single Berkels Electric Meat Slicing Machine, model P/N X13AE-PLUS, identified by NSN 7320-01-523-1957. The machine is a 120 V AC, 60 Hz, 1-phase unit with a 1/2 HP motor, a 13-inch stainless steel knife, and features automatic gravity feed with three stroke lengths and three stroke speeds. Delivery is required within 20 days FOB destination, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and strictly adhere to MIL-STD-129 labeling and marking requirements, with palletization governed by DLA Packaging Requirements for Procurement. All technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The item is destined for the USS NEW ORLEANS LPD 18 at FPO AP 96673, with transportation details governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE3SE-26-T-1093, issued under NAICS code 333241 by the Department of Defense’s Subsistence FSE Supply Chain. The contract was posted on August 4, 2026, with responses due by August 10, 2026, and the original required delivery date is July 30, 2026. The purchase request number is 7017722059 and the unit price is not specified beyond the total price reflecting one unit. Covered Defense Information potentially applies, and government identification must be removed from non-accepted supplies. The point of contact is Joseph Pineiro, and the shipment is tracked under RDD 777 with project code ZH9 TP 2. All vendor actions must follow DLA’s VSM system and adhere to the designated shipping and parcel post addresses provided.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
LEFT HAND DOOR PLAT
Solicitation # SPE3SE-26-T-1102
The contract pertains to the procurement of a left-hand door plate with part number 51081 and NSN 7310-01-583-1320, for a single unit to be delivered within 20 days to the USS FT LAUDERDALE LPD 28 BLISS in Pascagoula, Mississippi. Delivery is FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. Palletization must follow RP001, and all materials must be free of intentional mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lamps, or instrument sensors, with additional containment requirements for portable mercury-containing devices as specified by NAVSEA. Shipping must be conducted via traceable freight methods, not parcel post, using the designated DLA vendor address and vendor system codes. The solicitation number is SPE3SE-26-T-1102, with a response deadline of August 10, 2026, and an original required delivery date of August 6, 2026. The primary point of contact is Khuong Nguyen, and the contract is categorized under NAICS code 333241 with oversight by the Department of Defense’s Subsistence FSE Supply Chain.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
FREEZER, MECHANICAL, FOO
Solicitation # SPE3SE-26-T-1097
The contract specifies the procurement of one mechanically refrigerated frozen food cabinet, identified by part number 1FE-SS-HD\040 and NSN 4110010240127, manufactured by National Refrigeration & Air with CAGE code 28233. The unit must operate on 220V/50Hz single phase with two half doors and is required to use only environmentally compliant refrigerants—specifically R134A or R404A—as these are the only approved refrigerants for shipboard food service equipment. R290A, a flammable propane-based refrigerant, is explicitly prohibited for naval applications. The equipment must not contain or come into contact with mercury or mercury-containing compounds except for exempted uses such as functional batteries, fluorescent lights, sensors, or weapon systems, and any portable devices containing mercury must be shockproof with a secondary containment barrier in compliance with NAVSEA 5100-003D. The refrigerant system must fully comply with the Clean Air Act prohibiting Class 1 ozone-depleting substances. The unit must be packaged and labeled in strict accordance with MIL-STD-129 and ASTM D3951, with packaging requirements superseded by the DLA Master List of Technical and Quality Requirements. Palletization must follow RP001 DLA Packaging Requirements for Procurement. Delivery is mandated FOB destination within 20 days of contract award, with zero tolerance for quantity variance. The item must be shipped via traceable means, excluding parcel post, to the specified delivery address in Richmond, Kentucky. The contract number is SPE3SE-26-T-1097, with a required delivery date of August 6, 2026, and a response deadline of August 10, 2026. The procurement is managed under the Department of Defense’s Subsistence FSE Supply Chain, with point of contact Connor Tudja, and the unit of issue is one each (EA). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List effective on the solicitation issue date, and the item is subject to covered defense information protocols.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
COFFEE MAKER, AUTOMATIC
Solicitation # SPE3SE-26-T-1100
The contract specifies the procurement of two automatic coffee makers, model VP-17-3 from Bunn-O-Matic Corporation, with NSN 7310-01-407-8500, for delivery to the U.S. Navy facility in Gulfport, Mississippi. The equipment must operate on 120 VAC, 60 Hz, single phase, and includes a galley kit identified as 24785.0002 with stainless steel legs and rails. The items are commercial off-the-shelf products with adequate catalog data available for evaluation, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA packaging guidelines, and palletization must adhere strictly to DLA specifications. Delivery is required within five days of contract award, FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur upon arrival at the destination. The shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post, and should be addressed to the USS Jeremiah Denton COSAL Warehouse. The solicitation number is SPE3SE-26-T-1100, with a required delivery date of August 6, 2026, and the point of contact is Khuong Nguyen of the Department of Defense's Subsistence FSE Supply Chain.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
COVER, STEAM TABLE PAN
Solicitation # SPE3SE-26-T-1099
The contract pertains to the procurement of 18 steam table pan covers identified by NSN 7310-00-834-4480 and purchase request 7017735201, with a firm delivery deadline of five days after order award and a required delivery date of August 6, 2026. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951, and packaging must adhere strictly to MIL-STD-129 for labeling and RP001 for DLA-specific packaging protocols. Mercury and mercury-containing compounds are strictly prohibited in or on the product except for specified functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or reagents approved by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The items must be delivered FOB destination, inspected and accepted at the destination, with no tolerance for quantity variance. Packaging must be prepared in accordance with the specified unit of issue and quantity per unit pack, and palletization must meet DLA requirements. Shipment must be sent via the fastest traceable freight method to the Gulfport, Mississippi delivery address, with parcel post explicitly prohibited. The contract is governed under solicitation SPE3SE-26-T-1099, falls under NAICS code 333241, and is issued by the Department of Defense’s Subsistence FSE Supply Chain with point of contact Nicholas D’Aulerio. All government-specific tracking, distribution, and administrative codes are included for internal processing only.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
REFRIGERATOR-FREEZE
Solicitation # SPE3SE-26-T-1095
The contract pertains to the procurement of three refrigerator-freezer units identified by part number GMRO6-AAPWW and NSN 4110-01-391-8519, with a delivery requirement within 20 days of award. The solicitation number is SPE3SE-26-T-1095, issued by the Department of Defense’s Subsistence FSE Supply Chain, with performance location in Williamsburg, Virginia. The supplier, General Electric Co, identified by CAGE code 93217, must comply with all DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The item must not contain or come into direct contact with any intentional additions of mercury or mercury compounds, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specific chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and possess a secondary containment barrier as per NAVSEA 5100-003D. Additionally, the product must not utilize any Class I ozone-depleting substances. All supplies must be cleared of government identification if not accepted, and responses to this solicitation are due by August 10, 2026, with primary point of contact being Connor Tudja at DLA.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333241
New
DIBBS
INVERTER DRIVE
Solicitation # SPE3SE-26-T-1094
The contract pertains to the procurement of a single inverter drive with NSN 7310-01-583-1448 under solicitation SPE3SE-26-T-1094, with a response deadline of August 10, 2026, and a required delivery within 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The item is exempt from ozone-depleting substances and cannot contain intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, sensors, or instrument controls, all of which must meet NAVSEA 5100-003D guidelines for shock resistance and secondary containment. No technical data package is available from DLA Troop Support for this NSN, and requests to their data team are to be avoided. The place of performance is FPO with a zip of 09573, and the contracting officer is Khuong Nguyen, reachable via email and phone provided. The solicitation is posted on DIBBS and falls under NAICS code 333241, classified as a federal action with no set-aside designation.
Food Product Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 424410
New
DIBBS
Unable to decompose prime contract due to system outageThe contract pertains to a subcontract under the Department of Defense’s Subsistence FSE Supply Chain, with a posting date of August 3, 2026, and a response deadline of August 7, 2026. The place of performance is specified as Draper, Utah, with a ZIP code of 84020-2000. No solicitation number, NAICS code, set-aside details, or organizational type information is available due to a system outage that has prevented the decomposition of the prime contract and retrieval of comprehensive contract data. The point of contact information is also missing, and the official UI link for the request for quotation is provided but inaccessible for full details. The absence of key metadata limits visibility into scope, requirements, and eligibility criteria for potential bidders.
General Line Grocery Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 2 days
View Details