Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

KEYING GUIDE

Active
SPE7M1-26-U-5346Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE7M1-26-U-5346, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of 2,268 units of NSN 5935-01-158-9131, provided by Sun Electronics Distribution. The requirement is designated as a total small business set-aside under NAICS code 334417. Delivery is required within 32 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement incorporates specific technical and quality requirements, including DLA packaging standards and strict prohibitions against the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The contract specifies a zero percent quantity variance and identifies the item as a critical application component.

General Info

DoD procurement of 2,268 units of NSN 5935-01-158-9131 from Sun Electronics Distribution.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(1)

SPE7M1-26-U-5346.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
KEYING GUIDE
KEYING GUIDE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
SUN ELECTRONICS DISTRIBUTION DBA 1CL07 P/N 627-1146-111
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000240169 0001 EA 2,268.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5935011589131
DELIVERY (IN DAYS):0032
DELIVER FOB: ORIGIN
SPE7M1-26-U-5346
SECTION B
PR: 1000240169 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7M1-26-U-5346 NSN/Part Number: 5935-01-158-9131 Quantity: 2,268 EA Purchase Request: 1000240169QTY: 2268 Delivery: 32 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M1-26-U-5293
This contract is for the procurement of 222 connector adapters under solicitation SPE7M1-26-U-5293, identified as a critical application commercial item. The requirement specifies a delivery timeframe of 97 days with FOB Origin shipping and destination inspection and acceptance. Approved sources include Tyco Electronics, Honeywell International, and SV Microwave. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-DTL-55330 for connector preservation. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware or packaging, except for specific functional exceptions.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M5-26-T-418P
This contract, identified as SPE7M5-26-T-418P, is a solicitation from the Department of Defense Active Devices Division for the procurement of electrical connector backshells. The requirement covers two line items, each for a quantity of one unit under NSN 5935014319008, with associated part numbers from Lockheed Martin Corp and Glenair, Inc. The original required delivery date is August 14, 2026, with a delivery window of 20 days. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination in East Granby, Connecticut. Compliance with DLA packaging requirements RP001 and MIL-STD-129 is mandatory, and shipping must be conducted via the fastest traceable means. Technical and quality requirements are governed by the DLA Master List, and specific guidelines are provided for both hazardous and non-hazardous material packaging.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
JACK, TELEPHONE
Solicitation # SPE7M1-26-U-5309
This solicitation is for the procurement of 115 telephone jacks under NSN 5935-00-258-8947. The contract requires delivery within 40 days and specifies FOB Origin shipping with inspection and acceptance occurring at the destination. The items must adhere to specific technical and quality requirements, including the prohibition of Class I ozone-depleting substances and the restriction of intentionally added mercury, except where functionally required by NAVSEA. Quality assurance will be conducted using sampling methods per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging and preservation must comply with MIL-DTL-55330 for connectors, MIL-STD-129 for marking, and RP001 for palletization. The procurement is managed by the Department of Defense Maritime Supply Chain, and the items must meet the requirements of both the cited technical data and the listed part numbers from approved manufacturers.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M1-26-U-5318
This contract is for the procurement of 295 electrical receptacle connectors under solicitation SPE7M1-26-U-5318 for the Department of Defense Maritime Supply Chain. The items must adhere to technical specifications MS3470E and MIL-DTL-26482J and are designated as qualified products under the Qualified Products List. Delivery is required within 62 days from the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Key compliance requirements include strict prohibitions on the intentional addition of mercury and the use of Class I ozone-depleting substances. Contractors must provide a notice within each package informing the user that backshells are not included and providing the relevant national stock numbers for ordering them. Additionally, removable crimp type contacts must be supplied in noncorrosive rigid containers within the unit packaging and labeled with both current and superseded part numbers in accordance with MIL-STD-129 and SAE-AS39029.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M2-26-T-6353
This contract is for the procurement of 142 electrical receptacle connectors, identified by NSN 5935-00-086-8922 and part number M2726/37-001. The items are designated as critical application items and must comply with MIL-DTL-2726/37G(1) and MIL-DTL-2726C(1) specifications. The agreement includes a First Article Test requirement and mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Key restrictions include a prohibition on the intentional use of mercury or mercury-containing compounds and the use of Class I ozone-depleting substances without written approval. Delivery is set as FOB Origin with inspection and acceptance also occurring at the origin. The supplies are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of April 15, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5313
This contract is for the procurement of 144 electrical plug connectors under solicitation SPE7M1-26-U-5313 for the Department of Defense Maritime Supply Chain. The items are identified by NSN 5935003455800 and are designated as critical application items. Delivery is required within 90 days, with FOB Origin and inspection and acceptance occurring at the destination. The supplier must adhere to specific DLA packaging requirements, including RP001 and MIL-STD-129, with packaging following ASTM D3951 unless hazardous material standards apply. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. The contract incorporates various technical and quality requirements from the DLA Master List and specifies that provided items must meet both the cited technical data and the listed part numbers from approved manufacturers such as Lax Electronics and Spencer Industries.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5301
This contract is for the procurement of 337 electrical plug connectors, identified by NSN 5935007310139 and part number MS3126F12-10S. The items are classified as commercial products and are designated as critical application items. They must adhere to specific technical standards, including MIL-DTL-26482J and MS3126H, and must be sourced from the Qualified Products List for connector assemblies and electrical contacts. The agreement specifies a delivery timeframe of 89 days with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Strict compliance is required regarding DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, MODULAR P
Solicitation # SPE7M0-26-T-048V
This contract is for the procurement of one modular electrical plug connector, identified by NSN 5935015763747 and Daimler Truck North America part number 23-13305-010. The order is managed under solicitation SPE7M0-26-T-048V with a required delivery date of August 18, 2026, and a delivery timeframe of five days after order. The shipment is destined for the VA ARNG MATES 1 facility in Blackstone, Virginia, and must be sent via the fastest traceable means. Compliance with DLA packaging requirements RP001 and MIL-STD-129 is mandatory, with specific instructions for hazardous and non-hazardous materials. Technical and quality standards are governed by the DLA Master List, and the contract specifies a zero percent quantity variance with inspection and acceptance occurring at the destination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, ELECTRICAL
Solicitation # SPE4A7-26-T-673W
This contract is for the procurement of 41 electrical adapters, identified by NSN 5975-01-217-0699 and part number K15K0017-3HWF1 from Safran Electrical Components USA, Inc. The order is managed under solicitation SPE4A7-26-T-673W with a delivery timeline of 171 days after order. The items are to be delivered FOB Origin and will be shipped to DLA Distribution Jacksonville in Florida. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-129 and ASTM D3951, unless the material is deemed hazardous, in which case requirement IP025 applies. Inspection and acceptance will occur at the destination, with a required delivery date of April 1, 2028.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M1-26-U-5319
This contract is for the procurement of 93 electrical plug connectors, identified by NSN 5935-01-044-9577 and part number MS27467T25B4S. The items are classified as critical application items and must adhere to MIL-DTL-38999N and MS27467M specifications. The procurement is subject to Qualified Products List (QPL) and Qualified Manufacturers List (QML) requirements, ensuring that only qualified sources provide the assemblies. Delivery is required within 79 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with DLA requirements, specifically RP001 and MIL-STD-129, with a prohibition on the use of Class I ozone-depleting substances during manufacturing. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, and materials manufactured by Bendix Corporation between January 1977 and February 1984 are explicitly prohibited.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M1-26-U-5345
This contract is for the procurement of 609 electrical receptacle connectors, identified by NSN 5935011511245 and part number MS3452W16-11S. The items are designated as critical application items and must comply with Qualified Products List requirements for connector assemblies and electrical contacts. Technical specifications are governed by SAE AS34521 and SAE AS50151 standards. The agreement stipulates a delivery timeframe of 90 days with shipping handled FOB Origin and inspection and acceptance occurring at the destination. Strict adherence to DLA packaging and marking standards is required, including the prohibition of intentionally added mercury in hardware. The contract is issued under solicitation number SPE7M1-26-U-5345 by the Department of Defense Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CONNE
Solicitation # SPE7M1-26-U-5351
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M1-26-U-5304
This contract is for the procurement of 293 toggle switches, identified by NSN 5930008472599 and part number MS24660-23D. The items must adhere to technical specifications MIL-DTL-3950L and MS24660H. Delivery is required within 242 days, with the shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement includes strict environmental and quality mandates, specifically prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting substances without written approval. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. This is a critical application item managed under the Maritime Supply Chain for the Department of Defense.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
MOTOR, ALTERNATING C
Solicitation # SPE7M1-26-T-287W
This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-287W, is for the procurement of one alternating current motor with national stock number 6105-01-664-6397. The contract requires delivery within 20 days after the order is received and falls under NAICS code 333618. The agreement incorporates specific DLA packaging requirements and technical quality standards as defined in the DLA Master List. Additionally, it mandates the removal of government identification from any non-accepted supplies. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components. The response deadline for this federal requirement is August 31, 2026.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334515
New
DIBBS
LEAD, TEST
Solicitation # SPE7M1-26-T-288D
This contract is for the procurement of 15 units of test leads, identified as a commercial off-the-shelf item from Fluke Electronics Corp with part number 3781-18-2 and NSN 6625-01-208-5460. The order is managed under solicitation number SPE7M1-26-T-288D with a required delivery date of August 13, 2026, and a delivery timeframe of 20 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. The items must be delivered to Shaw AFB in South Carolina via traceable means, specifically avoiding parcel post. Packaging must adhere to DLA requirements, including MIL-STD-129 for labeling and either TQ requirement IP025 for hazardous materials or ASTM D3951 for non-hazardous goods. The contract also specifies the removal of government identification from any non-accepted supplies and notes that the items may contain batteries.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, METALL
Solicitation # SPE7M1-26-U-5315
This contract is for the procurement of 18 fixed metallized paper-plastic capacitors, identified by NSN 5910010128955 and Electron Products Inc part number HL4-394D-1. The items are designated as critical application items and must be delivered within 68 days. The agreement is a total small business set-aside under NAICS code 334416, with delivery terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-DTL-39028 for capacitor preservation. Specific marking requirements are mandated per MIL-STD-129 and IPC/JEDEC J-STD-609 to identify lead or lead-free attributes on individual unit packs. Additionally, the contract requires compliance with hazardous materials packaging and shipping regulations under IP025 and mandates the removal of government identification from any non-accepted supplies.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M1-26-U-5296
This contract, identified as SPE7M1-26-U-5296, is a solicitation for the procurement of 123 electrical plug connectors under NSN 5935-00-103-7624. The requirement is designated as a critical application item and specifies several approved manufacturers and part numbers, including Bell Textron, LAX Electronics, Winchester Interconnect, and Amphenol. The order is a total small business set-aside under NAICS code 335931 for the Department of Defense Maritime Supply Chain. Key compliance requirements include CMMC Level 2 self-assessment and adherence to covered defense information standards. Delivery is required within 63 days from the order date, with shipping set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with DLA requirements, specifically RP001 and MIL-STD-129, with specific instructions for hazardous or commercial packaging based on FED-STD-313 and ASTM D3951.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
DIBBS
AMMETER
Solicitation # SPE7M1-26-T-287Q
This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of four ammeters under NSN 6625-01-103-4601. The contract requires delivery within 20 days after receipt of order and is managed under solicitation number SPE7M1-26-T-287Q. Performance is centered in New Orleans, Louisiana, with a response deadline of August 31, 2026. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards and specific guidelines for items containing batteries. There is a strict prohibition on the use of Class I ozone-depleting substances during design, manufacturing, or testing unless written approval is granted by the contracting officer. Additionally, alternate offerors must provide a complete data package for both approved and alternate parts.
Other Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-26-T-288A
This contract is for the procurement of one 1/2 inch safety relief valve with a pre-set setting of 60 PSI, identified by NSN 4820009335988 and part number 0020-C01-MG-0060. The item is a critical application component used on Army Type M532 laundry units and is sourced from HLT Inc. The delivery is required within five days and is destined for the USS Dwight D Eisenhower CVN 69. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Inspection and acceptance will occur at the destination, and the shipment must be handled via the fastest traceable means, explicitly excluding parcel post.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details