Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

KIT, POWER BRUSH BLO

Active
SPE4A6-27-T-8066Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-8066 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 10 units of Power Brush Block Kits, identified by NSN 5977-01-092-3990. The contract is established as FOB Origin with destination inspection and acceptance at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Key delivery milestones include a need ship date of July 12, 2026, and an original required delivery date of February 12, 2027, with a delivery window of 174 days. The procurement is subject to rigorous quality and technical standards, including ISO 9001:2015 compliance for manufacturer inspection systems and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific quality requirements are outlined in documents RP001, RQ001, RQ002, RQ011, and RQ017. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and strict prohibitions against the intentional addition of mercury. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and reporting, and the prohibition of additive manufacturing unless specifically authorized.

General Info

DLA procurement of 10 Power Brush Block Kits for delivery by February 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

335991 - Carbon and Graphite Product Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first19 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Bradley Willis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
KIT,POWER BRUSH BLO
KIT, POWER BRUSH BLOCK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SPE4A6-27-T-8066
SECTION B
ELECTRO-TEC CORP DBA MOOG INC., 98089 P/N 44658
MOOG INC. 99932 P/N 44658
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015111276 0001 EA 10.000
NSN/MATERIAL:5977010923990
DELIVERY (IN DAYS):0174
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
SPE4A6-27-T-8066
SECTION B
PR: 7015111276 PRLI: 0001 CONT’D
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/12/2026 Original Required Delivery Date:02/12/2027
SPE4A6-27-T-8066 NSN/Part Number: 5977-01-092-3990 Quantity: 10 EA Purchase Request: 7015111276QTY: 10 Delivery: 174 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335991
New
DIBBS
Supply of Circuit Breakers (NSN 5925008378964)This subcontract involves the supply of 45 specialized circuit breakers, identified by NSN 5925008378964, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The provider is responsible for manufacturing or sourcing components that strictly adhere to SAE AS24509 and AS58091 standards, with a requirement for zero non-conformances according to MIL-STD-1916 or ASQ H1331. Additional requirements include strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. The contractor must also ensure full compliance with the Buy American Act and DFARS cybersecurity standards. This procurement falls under NAICS code 335991 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335991
New
Federal
59--ELECTRODE
Solicitation # N0010426RFG70
Solicitation N00104-26-R-FG70 is a negotiated procurement issued by NAVSUP Weapon Systems Support Mechanicsburg for the acquisition of 500 plug-in type electrodes (NSN 5977-00-402-8529). These items are designated as Special Emphasis Material (Level I) because they are used in crucial shipboard systems where failure could result in serious personnel injury or loss of the vessel. The contract is a total small business set-aside and will be awarded to the responsible offeror submitting the lowest priced, technically acceptable offer. Final delivery of the material is required within 186 days of the contract effective date, with certification data CDRLs due 20 days prior to delivery. The technical requirements are stringent, requiring adherence to Naval Ship Systems Command Drawing 815-1197212 and MS16662, along with specific material certifications for the body, upper electrode, and nut. Mandatory quality assurance measures include First Article Testing (FAT) via government destructive testing, non-destructive testing, hydrostatic pressure tests, and dielectric and insulation resistance tests. The contractor must maintain a total equipment baseline configuration and submit any waivers, deviations, or Engineering Change Proposals for government approval. All items must be mercury-free and permanently marked for traceability per MIL-STD-792. Administrative requirements mandate the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with specific routing to Portsmouth Naval Shipyard. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, including the application of specific DLR labels for applicable items. Inspection and acceptance are conducted at the contractor's plant, with lot acceptance based on a zero-defect standard. Offerors must submit proposals by November 27, 2026, ensuring all annual representations and certifications are current in the System for Award Management.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 24 days
View Details
NAICS: 335991
New
DIBBS
Supply of Thermocouple Heating Elements (NSN 6685-01-614-9819)This subcontract involves the manufacture or procurement of two thermocouple heating elements, identified by NSN 6685-01-614-9819, to support prime contractors on DLA Weapons Support ASC projects for the US Navy. The contractor is responsible for ensuring strict adherence to quality sampling standards per MIL-STD-1916 or ASQ H1331, and must follow specific packaging, marking, and palletization guidelines according to MIL-STD-2073-1E, MIL-STD-129, and RP001. The agreement requires full cybersecurity compliance in accordance with DFARS 252.204-7012. Final delivery of the units is designated as FOB Destination to the USS NANTUCKET (LCS 27). The project falls under NAICS code 335991 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 335991
Federal
CHARCOAL
Solicitation # W911S227U0085
Solicitation W911S227U0085 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of 80,000 pounds of new, virgin, bulk, granular activated carbon. The requirement specifies Calgon F-300 or an equal product that is NSF STD 60 or 61 certified for industrial wastewater applications. The product must be delivered in 1,000 lb bags on an F.O.B. destination basis, with a preferred delivery window of 30 days. This acquisition is designated as a Total Small Business Set-Aside under NAICS code 335999. Award will be granted to the responsible offeror providing the most advantageous offer based on price and technical evaluations. If proposing an equal product, offerors must provide descriptive literature, brand and model numbers, and details on any modifications to ensure the product meets the salient physical and functional characteristics of the brand name requirement. Submissions must be made via the PIEE Solicitation module and must include a completed Attachment 1 regarding certifications and country of origin to avoid being rejected as nonresponsive. The contract incorporates various federal regulations, including Buy American requirements, cyber incident reporting, and specific prohibitions on covered telecommunications equipment.
W6QM Micc-Ft Drum

POSTED

7 days ago

DEADLINE

in about 4 hours
View Details
NAICS: 335991
SLED
Powder Activated Carbon
Solicitation # 354-RFB-27-12
The Town of Cary is soliciting bids under solicitation number 354-RFB-27-12 for the supply of domestically produced powdered activated carbon for the Cary Apex Water Treatment Facility. The material is used to reduce Total Organic Carbon, control taste and odor, and remove perfluorinated compounds, with an estimated usage of 400,000 pounds over a four-month period across two locations. All materials must be produced from domestic raw materials and strictly adhere to AWWA Standard B-600-24 and NSF Standard 60. Deliveries must be made in bulk shipments, FOB destination, with the seller assuming all costs for freight and handling. Award will be granted to the lowest responsive and responsible bidder based on a combination of price and performance. Evaluation includes a technical review of perfluorinated compound removal and jar testing to verify the removal of MIB and geosmin. Bidders must submit a 1.0 lb sample, a Material Safety Data Sheet, product specification sheets, and at least three municipal references. All bids must be submitted electronically via the North Carolina electronic Vendor Portal by November 9, 2026, at 4:00 PM UTC, with questions due by November 2. The contract incorporates various federal and state regulatory requirements, including the Davis-Bacon Act and Equal Employment Opportunity standards, particularly when federal funding is utilized.
Town of Cary

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 335991
DIBBS
Supply of Overcurrent Devices (P/N 610704-T10SP)This subcontract involves the procurement or manufacture of five overcurrent protection hardware units, specifically L3Harris Maritime Power & Energy part number 610704-T10SP, to meet NSN 010763584 specifications. The equipment is intended for prime contractors delivering to the Defense Logistics Agency Weapons Support Maritime Supply Chain under the Department of Defense. The contractor is responsible for ensuring all units are packaged and marked in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. This requirement falls under NAICS code 335991, with a response deadline set for November 5, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

9 days ago

DEADLINE

in 1 day
View Details
NAICS: 335991
DIBBS
CARBON STOCK, ELECTRICA
Solicitation # SPE4A6-27-U-0143
Solicitation SPE4A6-27-U-0143 is a unilateral Indefinite Delivery Contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of carbon stock electrical contact brushes, identified by NSN 5977015683488. The contract has a maximum value of 350,000.00 dollars and an estimated requirement of 42 units. Delivery is required within 64 days after receipt of order with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. This is not a small business set-aside, and the applicable NAICS code is 335991. The contractor must adhere to strict quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging requirements governed by MIL-STD-2073-1E and RP001. Marking must comply with MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract incorporates various federal and defense regulations, including the Berry Amendment, the Buy American Act, and NIST SP 800-171 cybersecurity assessment requirements.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

12 days ago

DEADLINE

in 3 days
View Details
NAICS: 335991
DIBBS
Supplier of Electrical Contact Carbon Stock (NSN 5977015683488)This subcontract involves the procurement of 42 units of specialized carbon stock for electrical contact brushes to support the DLA Weapons Support ASC Commodities Division. The selected supplier is responsible for manufacturing or sourcing materials that strictly adhere to NSN 5977015683488 specifications. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates strict adherence to the Buy American Act and the Berry Amendment, and it explicitly prohibits the use of additive manufacturing. Interested parties must submit their responses by November 6, 2026, for this Department of Defense requirement categorized under NAICS code 335991.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

12 days ago

DEADLINE

in 3 days
View Details
NAICS: 335991
SLED
Activated Powder Carbon, As Needed Over 5-Year Period (Re-Bid)
Solicitation # ITB 6631-26
The City of Spokane is soliciting bids under ITB 6631-26 for the supply of Activated Powder Carbon on an as-needed basis over a five-year period. Based on historical usage data, the estimated requirement is approximately 306,000 lbs over the contract term. The material must be 100 percent virgin, coal-based, and non-halogenated carbon with a BET surface area greater than 450 m2/gm and an auto ignition temperature exceeding 400 degrees Celsius. Moisture content must comply with the current revision of ASTM 2867. Technical compliance is evaluated on a pass/fail basis, and bidders must initial the technical specifications sheet to be considered responsive. Required packaging includes bags with a height of 50 inches, a discharge diameter of 20 inches, a discharge length of 36 inches, and a discharge spout tie located 8 inches below the bottom of the bag. The contract is governed by the laws of the State of Washington and the Washington State Uniform Commercial Code, with all disputes handled in Spokane County. Bidders must adhere to strict non-discrimination policies, including compliance with the Americans with Disabilities Act and Section 504 of the Rehabilitation Act of 1973. All shipments must be delivered to the warehouse at 2900 S Geiger Blvd, Spokane, WA, and invoices will only be processed once all items are received.
City of Spokane

POSTED

27 days ago

DEADLINE

in 2 minutes
View Details
NAICS: 335991
SLED
Notice of Intent to Sole Source - MicroC 2000
Solicitation # city-of-holly-hill-27-PW-SS03-2027
The City of Holly Hill Public Works department in Florida has issued a Notice of Intent to Sole Source for the procurement of MicroC 2000 supplemental carbon. This product is essential for the operations of the city's wastewater treatment facility, and Environmental Operating Solutions, Inc. has been identified as the sole manufacturer capable of providing this specific material. The solicitation is identified by number city-of-holly-hill-27-PW-SS03-2027 and was posted on October 1, 2026. Primary coordination for this procurement is handled by Mary Mearsheimer, with Michele Moore serving as the secondary point of contact. Further details regarding the bidding process can be accessed through the official vendor link.
City Of Holly Hill — Public Works

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 335991
DIBBS
Electrical Component Manufacturing – Contactor, Spec (NSN 6110-01-602-6684)This subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture, testing, packaging, and delivery of a military-specification electrical contactor identified by NSN 6110-01-602-6684. The contractor is required to ensure full compliance with federal logistics requirements and applicable MIL-SPEC standards to meet the rigorous demands of military hardware. Classified under NAICS code 335991, the project focuses on the production of specialized electrical components. The contract was posted on August 17, 2026, and is managed through the Defense Logistics Agency to ensure the procurement of critical electrical components for defense applications.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 335991
DIBBS
Electrical Arrester Supply (NSN 5920013349848)The contract entails the supply of 19 electrical arresters identified by NSN 5920013349848, with strict adherence to MIL-STD-129 for labeling and MIL-STD-2073-1E for packaging requirements to ensure standardization and traceability within the Department of Defense logistics system. The items must be delivered to DLA San Joaquin, California, fulfilling a specific operational need under the Defense Logistics Agency’s procurement framework. This subcontract is categorized under NAICS code 335991 for other electrical equipment and component manufacturing, indicating the specialized nature of the product and its production environment. The solicitation was posted on August 5, 2026, and is accessible through the DIBBS system under contract number SPE7M426V4751, though no additional details on bidding or award status are provided. The performance location and agency details confirm the military and logistical context of the requirement, with all delivery and marking specifications aligned with federal defense standards.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541380
New
DIBBS
First Article Test (FAT) Validation and CertificationThis subcontract for First Article Test (FAT) Validation and Certification supports prime contractors on DLA Weapons Support projects. The selected provider will utilize precision measurement equipment to test initial production units, specifically validating bearing tolerances and performance. The scope of work includes coordinating with the Engineering Support Activity for acceptability evaluations and delivering a final FAT Report along with an approved test sample. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in Bremerton, Washington. To ensure quality standards, the contractor must maintain an ISO 9001:2015 quality management system. The opportunity falls under NAICS code 541380, with a response deadline of November 12, 2026.
Testing Laboratories and Services

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333242
New
DIBBS
Supply of Roller Bearing Units (NSN 3130-01-031-7653)This subcontract involves the procurement of 34 roller bearing units under NSN 3130-01-031-7653 to support prime contractors for the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing these parts in strict accordance with solicitation quality standards, with final delivery to the designated DLA facility in Bremerton. To ensure quality compliance, all manufacturers and non-manufacturers must hold a valid ISO 9001:2015 certification. The opportunity is categorized under NAICS code 333242, with a response deadline set for November 12, 2026.
Semiconductor Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
Supply of High-Strength Hexagon Head Cap Screws (NSN 5305011604499)This subcontract involves the supply of six high-strength hexagon head cap screws, identified by NSN 5305011604499, for prime contractors supporting DLA Weapons Support ASC projects for MH-60 Romeo aircraft. The contractor is responsible for manufacturing or sourcing the fasteners in strict accordance with NASM21095 Revision 2 and NASM6812 Revision 4 standards. Rigorous quality and logistics protocols are required, including quality assurance per MIL-STD-1916 or ASQ H1331 and packaging compliant with MIL-STD-2073-1E and RP001. Additionally, the provider must ensure full compliance with the Berry Amendment and the Buy American Act. The opportunity is managed by the Department of Defense under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-420-2169)This subcontract involves the supply of 262 blind rivets, identified by NSN 5320-00-420-2169, to be delivered to Hill Air Force Base in Utah. The contract is managed by the DLA Weapons Support ASC Commodities Division under the Department of Defense. The supplier is responsible for manufacturing or sourcing the rivets in accordance with MIL-R-24243/7D Revision D, ensuring all items are marked per MIL-STD-130N and packaged according to ASTM D3951 and RP001 standards with MIL-STD-129 labeling. To ensure operational and quality standards, the provider must implement quality control measures based on SAE AS9003 or ISO 9001 and maintain cybersecurity compliance with NIST SP 800-171. The procurement falls under NAICS code 332510, with a response deadline set for November 12, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 488410
New
DIBBS
Defense-Compliant Packaging and Labeling ProviderThis subcontract involves providing specialized military-grade packaging, marking, and labeling services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires packaging hardware in strict accordance with ASTM D3951 and RP001 standards, while ensuring all marking and labeling comply with MIL-STD-129 and MIL-STD-130N. The provider must utilize military-specification materials and compliant identifier systems to prepare shipments for final delivery to DLA Distribution San Diego. The project is categorized under NAICS code 488410 and is performed in San Diego, California. Interested parties should note the response deadline of November 12, 2026, for this defense-compliant logistics requirement.
Motor Vehicle Towing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
Manufacturer of NAS1101 Critical Application Machine ScrewsThis subcontract involves the manufacture of 525 high-precision machine screws, specifically Part Number NAS1101E4-10, in accordance with NAS1101 Revision 14 for the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to quality and inspection standards, utilizing systems compliant with SAE AS9003 or ISO 9001 and sampling methods per MIL-STD-1916 or ASQ H1331. All finished units must be delivered with a Certificate of Quality Compliance. The contractor must ensure full compliance with the Berry Amendment for domestic sourcing and meet NIST SP 800-171 cybersecurity standards. Performance for this contract is based in San Diego, California, under NAICS code 332722. The response deadline for this opportunity is November 12, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
Supply of Nut Spacer, Plate (NSN 5310-00-151-5490)This subcontract involves the manufacture or procurement of 5,328 Nut Spacer, Plate components under NSN 5310-00-151-5490 for prime contractors supporting the Department of Defense. The project is managed by the DLA Weapons Support ASC Commodities Division and will be performed at Hill AFB. Quality assurance is a critical requirement, with sampling performed according to MIL-STD-1916, ASQ H1331 Table 1, or equivalent zero-based sampling plans. The opportunity falls under NAICS code 332722, with a response deadline set for November 12, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
Specialized Aerospace Material SupplyThis subcontract, titled Specialized Aerospace Material Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The contract requires the provision of certified aerospace-grade raw materials for prime contractors, specifically ensuring that all materials adhere to the chemical and physical properties outlined in TDP Rev A Gen 3 and Reference Drawing NR 43999 L3002320. Performance will take place at Tinker AFB, and the supplier is mandated to provide Material Test Reports and Certificates of Conformance while maintaining strict compliance with ITAR regulations and DFARS Specialty Metals clauses. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413. Interested parties must submit their responses by November 12, 2026. The primary objective of the agreement is the delivery of fully certified raw materials that meet rigorous military and aerospace standards to support critical weapons support projects.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
Precision Aerospace Component ManufacturingThis subcontract opportunity is for the manufacture of a high-precision aircraft structural component, NSN 1560-01-477-8964, supporting DLA Weapons Support ASC projects. The selected provider will be responsible for fabricating one finished and inspected structural support in accordance with TDP Rev A Gen 3 and Basic Drawing NR 43999 L3002320. Performance will take place at Tinker AFB, and the project requires the use of precision CNC machining. To be eligible, contractors must be JCP certified and CMMC Level 2 compliant, with a quality system that adheres to SAE AS9003 or ISO 9001 standards. This is a total small business set-aside under NAICS code 336413. Interested parties must submit their responses by November 12, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 488510
New
DIBBS
Military-Grade Packaging and MarkingThis subcontract involves providing specialized packaging, marking, and labeling services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work requires the delivery of two Valve Disk Nuts, ensuring they are packaged and marked for FOB Origin shipment. All activities must strictly adhere to military standards, specifically MIL-STD-129, MIL-STD-2073-1E, and DLA requirements RP001 and RQ017 to ensure proper physical identification. The contractor is required to use industrial marking equipment and MIL-SPEC packaging materials that are free from mercury compounds. Performance of these services will take place in Tracy, California. The solicitation was posted on November 3, 2026, with a response deadline of November 12, 2026, under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Manufacturing of Valve Disk NutsThis subcontract involves the precision manufacturing of two Valve Disk Nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must strictly adhere to Basic Drawing NR 80064 2178000, Revision R, utilizing precision CNC milling and turning equipment to meet exact dimensions and tolerances. All materials used in production must be compliant with the Berry Amendment. To qualify, the manufacturer must hold SAE AS9003 or ISO 9001 certification, be JCP certified, and maintain CMMC Level 2 compliance. The final deliverables are identified by NSN 5310-01-104-0720, with the place of performance located in Tracy, California.
Machine Shops

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332721
New
DIBBS
Manufacturing and Supply of Grooved Headless PinsThis subcontract involves the manufacturing and supply of precision-machined headless grooved pins for the Department of Defense, specifically under the DLA Weapons Support ASC Commodities Division. The contractor is responsible for producing seven pins that meet NSN 5315-01-269-2683 specifications and the DLA Master List of Technical and Quality Requirements using CNC lathes or precision grinding equipment. The project requires strict adherence to the Buy American Act and quality standards MIL-STD-1916 or ASQ H1331. Final deliverables must be packaged, marked, and delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 12, 2026.
Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS