Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Government of Canada was posted on March 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Kitkatla Harbour Electrical Reconstruction, BC

Closed
30007188International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
Inland Empire Job Corps-Request for Quote Electrical Repairs
Solicitation # Inland Empire Job Corps Electrical Repairs
Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to perform electrical and fire alarm repairs at the Inland Empire Job Corps Center in San Bernardino, California. Under NAICS code 238210, the scope of work includes installing GFCI protection in cafeteria and academic areas, repairing open-ground conditions, installing filler plates in panelboards, and updating circuit directories and feeder labeling for multiple panelboards. All work must comply with National Electrical Code (NEC), NFPA, and applicable federal, state, and local regulations. The contract is a fee-for-service arrangement requiring a lump sum bid, and performance is subject to Service Contract Labor Standards wage determinations for Riverside and San Bernardino counties. Interested offerors must submit a bid sheet, a completed supplier packet including Form W-9 and self-certification, three professional references for similar projects, and proof of insurance by 3:00 PM PT on November 12, 2026. The opportunity is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone, with required SBA certification letters for those claiming specific statuses. Award selection is based on best value as determined by MTC. Successful contractors must maintain general liability insurance of at least 1,000,000 dollars and worker's compensation with employer's liability of 500,000 dollars, while adhering to strict federal guidelines regarding information security, the Buy American Act, and the prohibition of trafficking in persons.
Inland Empire Job Corps

POSTED

about 4 hours ago

DEADLINE

in 3 days
NAICS: 238210
New
26-140 Installation of Emergency Shut Off Switches
Solicitation # 26-140
Solicitation 26-140 is a subcontracting opportunity with Atterbury Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor. The project requires the installation of emergency shut-off switches on power tools in the Maintenance and Glazing shops located in Edinburgh, Indiana. Specifically, the contractor must install mushroom-head push-button switches and new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panels with 60A shunt-trip main circuit breakers in both shops. All installations must include a minimum of 30% spare branch breakers and a manual reset function following power failures. Work must comply with FNC guidelines, national building codes, and EPA and OSHA regulations, with Indiana state regulations prevailing if more stringent. The procurement is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. A mandatory site visit was scheduled for November 10, 2026, and proposals are due by November 20, 2026, via email to Tammy Swallows. Bidders must submit a single lump sum contract bid and provide a valid Indiana Contractor's License, W9, and certification of compliance with Davis Bacon Act wage rates. Award will be based on best value, evaluated by price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Contractors are required to maintain specific insurance coverages, including general liability of at least 1 million dollars per occurrence and automobile liability. Payment terms are Net 30. Upon receiving a Notice to Proceed, the contractor has 10 days to provide a sequenced construction schedule. The contract includes a one-year workmanship guarantee starting from the date of substantial completion. Final acceptance requires a walk-through and the correction of any punch list items within 14 days.
Atterbury Job Corps. – Adams & Associates

POSTED

about 4 hours ago

DEADLINE

in 10 days
NAICS: 238210
New
Transformer Oil Testing Services
Solicitation # RFP-VC-26-010
The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The project scope encompasses three primary areas: performing visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety during collection, and conducting oil testing analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems, assess monitoring instrumentation, develop preventive maintenance checklists, and provide on-site training for agency staff. All work must be performed at designated agency facilities in Rancho Cucamonga and Chino, adhering to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards. The agency intends to make a single award to the most capable and cost-effective offeror. Evaluation criteria include a proven track record of at least two similar projects within the last five years, personnel qualifications, the proposed staffing plan, and the ability to meet the project timeline. Proposals must be submitted electronically via the PlanetBids portal by December 23, 2026, and must include a comprehensive set of documents, including a company profile, project methodology, and various certifications such as a Non-Collusion Statement and Workers Compensation Certificate. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.
Inland Empire Utilities Agency

POSTED

about 4 hours ago

DEADLINE

in about 1 month
NAICS: 238210
New
Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services
Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services
Management & Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project, with an estimated value between $25,000 and $100,000, requires a qualified electrical contractor to inspect, repair, and certify emergency lighting systems in accordance with NFPA 101 (2024 Edition), NFPA 70, and OSHA regulations. Key deliverables include the application of durable tracking labels to each fixture and the integration of fixture data and a recurring 30-day functional testing schedule into the facility's Computerized Maintenance Management System. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a signed bid form, and a detailed cost breakout. For bids of $25,000 or more, a bid bond guarantee of 20% is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. The contract is subject to the Davis-Bacon Act, Federal Contractor Minimum Wage requirements, and FAR standards regarding work hours, safety, and small business certifications. Compliance with Executive Order 13706 for paid sick leave and strict records management per DOL 2018-03 is also required.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 21 days

AI Contract Overview

Show more

The Kitkatla Harbour Electrical Reconstruction project in British Columbia involves the comprehensive replacement of defective electrical components at the Kitkatla Small Craft Harbour. Managed by the Department of Fisheries and Oceans for the Government of Canada, the mandatory scope of work requires a like-for-like replacement of all panels, breakers, receptacles, cables, and junction boxes on the floats. Specific requirements include replacing all G-jumper cables between floats, repairing kiosks on floats 4, 5, and 6, replacing junction box 2, and installing new electrical cabling under the gangway. In addition to the mandatory requirements, the contract includes optional provisions for up to 40 days of electrician services and the supply of additional materials. This solicitation, identified by number 30007188, is a federal project located at coordinates 53.795, -130.439. Interested parties must adhere to the response deadline of October 9, 2025.

General Info

Electrical reconstruction of Kitkatla Harbour components for Canada's Department of Fisheries and Oceans.

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Response Deadline

Deadline has passed

Posted

Solicitation

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of Fisheries and Oceans
Contacts1 person available
OfficeN/A
Office AddressN/A
Contacts
Gloria Tsaka KipuniPoint of Contact

Full Description

Show more
TITLE: Kitkatla Harbour Electrical Reconstruction, BC CONSTRUCTION PROJECT SUMMARY: The mandatory work to be carried out under this contract includes replacing all panels, breakers, receptacles, cables, and junction boxes, like for like, for the electrical system on the floats. The optional work to be carried out, upon award, under this contract includes additional electrician hours and mark-up for the supply of materials for the electrical system in Kitkatla Small Craft Harbour. PROJECT DESCRIPTION: The electrical system at Kitkatla Small Craft Harbour requires replacement of defective panels, breakers, receptacles, and cabling in the electrical system. The site is located at coordinates: (53.795, -130.439), Kitkatla BC, V0V 1C0. Mandatory work to be performed: 1. Replace All G – Jumper Cable Between Floats 2. Repair Kiosk on Float 4 3. Repair Kiosk on Float 5 4. Repair Kiosk on Float 6 5. Replace Junction Box 2 6. Replace Electrical Cable Under Gangway Optional work to be performed: 1. Electrician Services (40 Days) 2. Supply of Additional Materials

More opportunities from Government of Canada → Department of Fisheries and Oceans

Same awarding agency

NAICS: 237130
New
International
Pacific Science Enterprise Center (PSEC) - Power Distribution Upgrade
Solicitation # 30008413
Fisheries and Oceans Canada is soliciting the supply, installation, testing, and commissioning of new underground electrical distribution and communications infrastructure at the Pacific Science Enterprise Center in West Vancouver, British Columbia. The scope of work includes comprehensive civil works such as excavation, trenching, and surface restoration, as well as the installation of electrical cabling, access vaults, pull boxes, and outdoor electrical kiosks. Additionally, the contractor is responsible for the complete electrical infrastructure for new Electric Vehicle Supply Equipment, including feeders, wiring, and concrete bases. All project activities, including final clean-up and demobilization, must be completed by March 19, 2027. This procurement follows a two-phase selection process. Phase 1 evaluates bidder qualifications and experience, requiring at least one reference project of similar scope completed within the last five years. Pre-qualified bidders will then be invited to Phase 2 to provide a financial bid based on detailed specifications and drawings. This opportunity is a conditional set-aside under the Procurement Strategy for Indigenous Business, requiring certified Indigenous businesses to provide specific certifications. Bidders must also be in good standing with WorkSafeBC and comply with the Canada Labour Code and Canadian Occupational Health and Safety Regulations.
Power and Communication Line and Related Structures Construction

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 562111
New
International
Waste Removal at Pacific Biological Station, Nanaimo BC
Solicitation # 30008361
Fisheries and Oceans Canada is soliciting proposals for waste and recycling removal services at the Pacific Biological Station located in Nanaimo, British Columbia. The selected contractor will be responsible for providing all labor, supervision, equipment, and technical expertise necessary for the collection and disposal of garbage, recycling, and organic waste. The scope of work includes the rental and dumping of standard containers as well as 20-yard roll-off containers for wood and general waste on an as-needed basis. The contract term begins upon award and extends through November 30, 2030. To be considered, bidders must meet several mandatory technical requirements, including a minimum of three years of experience in waste collection, the submission of a waste disposal protocol detailing the chain of custody, registration with WorkSafe BC, and a valid municipal business license for the Nanaimo region. Proposals will be evaluated based on these mandatory criteria and rated technical points, with financial offers submitted in Canadian dollars. The solicitation closes on November 17, 2026, at 2:00 PM EST. Contractual obligations include strict adherence to security protocols, as personnel are prohibited from having unescorted access to restricted areas or accessing protected and classified information. All employees must complete a site safety orientation. Invoicing is to be handled electronically with a 30-day payment term for undisputed amounts. Notably, a previous requirement for pollution liability insurance has been removed per amendment 001.
Solid Waste Collection

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 237990
New
International
Propeller Wash and Clamshell Dredging, Fraser River, BC
Solicitation # 30008504
The Department of Fisheries and Oceans Canada is soliciting bids for propeller wash and clamshell dredging services at three Small Craft Harbour sites on the Fraser River in British Columbia: Kanaka Landing, McMillan Island, and McIvor's Landing. The project requires the contractor to provide all necessary supervision, labor, materials, and equipment to achieve specific dredge depth goals of -2.5m Chart Datum for Kanaka and McIvor's and -3.5m Chart Datum for McMillan Island. All work must be performed within a strict environmental work window from December 1, 2026, to February 15, 2027, as established by the Fish and Fish Habitat Protection Program. Technical requirements include dredging side slopes to a 3 horizontal to 1 vertical ratio and ensuring clamshell materials are placed close to the riverbed rather than dumped from the surface. The contract will be awarded to the lowest compliant Canadian bidder. Bidders must submit their proposals by November 10, 2026, including a full list of subcontractors and suppliers to avoid disqualification. Key requirements include maintaining comprehensive insurance coverage, including Commercial General Liability and Marine Liability, and remaining in good standing with WorkSafeBC. While the contractor is responsible for quality control, the Department of Fisheries and Oceans will provide the Environmental Monitor. Bidders are encouraged to visit the sites at their own expense to verify conditions, as no subsequent allowances will be made for errors in observing site risks or contingencies.
Other Heavy and Civil Engineering Construction

POSTED

4 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 332312
New
International
Gulf NB 12 Metre Module Floating Docks Cap de St-Louis, NB
Solicitation # 30008535
Fisheries and Oceans Canada has issued solicitation 30008535 for the fabrication, transportation, and delivery of twenty-three 12-meter floating wharf modules to be delivered on land at two public wharf locations in New Brunswick. The project requires the delivery of thirteen modules (twelve Type A and one Type B) to Cap-de-St-Louis and ten modules (eight Type A and two Type B) to Le Goulet. All work must be completed by March 31, 2027. The scope encompasses all labor, materials, equipment, and supervision necessary to meet the project drawings and technical specifications, which mandate a minimum service life of 20 years for the modules. Technical requirements specify the use of hot-dip galvanized steel, smooth high-density polyethylene piping, polystyrene filling, and treated dimensional lumber compliant with CSA O80 and AWPA M2 standards. Contractors must provide professional engineer-sealed shop drawings and adhere to strict quality control for welding and galvanization. Bidders are required to be Canadian Contractors and must provide bid security in a digital format. Post-award security options include either performance and labor/material payment bonds of 50 percent of the contract amount or a security deposit/standby letter of credit of 20 percent. Performance will be evaluated based on workmanship, timeliness, project management, and health and safety compliance.
Fabricated Structural Metal Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 541380
New
International
Herring Biological Sampling
Solicitation # 30008238
Fisheries and Oceans Canada (DFO) is soliciting proposals for laboratory services to process biological samples from British Columbia commercial herring fisheries, test fisheries, and research activities. The contractor is responsible for processing approximately 200 to 250 samples annually, with each sample typically containing 100 fish. Key tasks include recording length, weight, sex, gonad length, gonad weight, and maturity stage for each fish, as well as collecting one herring scale for age determination. All biological data must be entered into a DFO-provided MS Access database, and the contractor must prepare scale slides, maintain daily electronic backups, and return cleaned sample buckets in groups of ten. The contract requires a minimum two-person team consisting of one Project Manager and one Sampling Technician, both of whom must be fluent in English and possess specific experience in herring processing and scale collection. The contractor must provide a suitable laboratory facility equipped for cold storage and biological waste disposal; if the facility is located more than 10 km from the Pacific Biological Station, the contractor must manage and fund all sample transportation. Processing occurs annually between March 1 and May 15, with a total estimated effort of 52 working days per year. The initial contract period runs from the award date until February 28, 2027, with four subsequent option years available. The maximum funding for the contract is 285,000.00 dollars, and payment is made within 30 days of receiving an undisputed invoice.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 6 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS