Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

KNOB

Active
SPE7L3-26-T-108MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a knob identified by NSN 5355-00-333-2593 and part number MS25168P1B, manufactured in accordance with the current revision of the non-government standard NASM25049 Revision 1 dated 02/28/2013, and referenced against the basic specification MS25168F. The item is designated as a critical application item and must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless otherwise specified. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless explicitly altered by contract terms, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. All hardware must conform to the current revision of the governing standard as of the solicitation date, with past revisions only acceptable for pre-existing inventory. The product must be packaged in compliance with ASTM D3951, but only to the extent not superseded by the DLA Master List, and all packaging must be marked and labeled per MIL-STD-129. Palletization shall adhere to DLA Packaging Requirements for Procurement. The contract specifies a delivery of 58 units within 28 days FOB origin to DLA Distribution Cherry Point, North Carolina, with inspection and acceptance occurring at destination. The unit price is $58.00, totaling $3,364, with no variance allowed in quantity. The need ship date is August 18, 2026, and the original required delivery date is January 22, 2027. The item does not require ozone-depleting substances and must be identified per MIL-STD-130N. Transportation details follow DLAD Proc Notes C19 and C20, and the solicitation number is SPE7L3-26-T-108M, issued by the Department of Defense with primary point of contact Rajesh Sehgal.

General Info

DOD seeks 58 units via DIBBS by July 20, 2026, under solicitation SPE7L3-26-T-108M.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-108M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Rajesh Sehgal
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
KNOB
KNOB
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PLASTIC
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
THIS ITEM DOES NOT REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES PER DLA MEETING, 3-4 AUG 93, SUBJECT: DLA TECHNICAL/STANDARDIZATION MEETING ON AUTHORITY TO IMPROVE CUSTOMER SUPPORT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MS25168F NOT 2 REVISION NR F DTD 11/21/2023 PART PIECE NUMBER: MS25168P1B
SPE7L3-26-T-108M
SECTION B
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NASM25049 REVISION NR 1 DTD 02/28/2013 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017441642 0001 EA 58.000
NSN/MATERIAL:5355003332593
DELIVERY (IN DAYS):0028
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
SPE7L3-26-T-108M
SECTION B
PR: 7017441642 PRLI: 0001 CONT’D
Need Ship Date:08/18/2026 Original Required Delivery Date:01/22/2027
SPE7L3-26-T-108M NSN/Part Number: 5355-00-333-2593 Quantity: 58 EA Purchase Request: 7017441642QTY: 58 Delivery: 28 days ADO

Similar Contracts

NAICS: 327999
New
Federal
INL_RFQ-PR15696200 BASE SECURITY CONSTRUCTION MATERIAL GOER DICARThe U.S. Department of State, through the International Narcotics and Law Enforcement Affairs Office in Bogota, is soliciting quotations for BASE SECURITY CONSTRUCTION MATERIAL GOER DICAR under solicitation number INL_RFQ-PR15696200. This combined synopsis/solicitation, issued in accordance with FAR Subpart 12.6, serves as the sole procurement document with no additional written solicitation to follow. Interested vendors must submit their quotations via email to AlejoA@state.gov and BogotaINLSolicitation@state.gov no later than August 6, 2026, at 4:00 p.m. Eastern Time, with late submissions disqualified. Compliance with Section 3 of the RFQ document is mandatory for consideration for award. The North American Industry Classification System code for this requirement is 327999, indicating it falls under other nonmetallic mineral product manufacturing. The contracting office is based at the American Embassy in Bogota, with administrative support handled from the Department of State in Washington, D.C., though the place of performance details are not specified. Primary point of contact for inquiries is Andres Alejo Salguero.
American Embassy Bogota - Nas

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 327999
New
SLED
Electric Service Pull BoxNashville Electric Service is soliciting six Electric Service Pull Boxes meeting stringent technical specifications: each unit must be 30 inches wide by 48 inches long by 36 inches deep, constructed monolithically with open bottoms and straight walls to allow for easy grade adjustments, and rated to support a minimum vertical load of 15,000 pounds (Tier 15). The cover must feature a minimum coefficient of friction of 0.50, include provisions for lift hooks, and permanently display the load rating, “ELECTRIC” logo, and manufacturer identification through molded or engraved markings. Fastening must be accomplished using stainless steel ½-inch penta head bolts with self-centering or floating stainless steel nuts. Only four approved manufacturers and their specific part numbers—NEWBASIS PCA304836S-11E, OLDCASTL 30481844, APC CP304836HU2299PS, and HUBBELL A1B304836A017—are acceptable; no substitutions or alternate brands will be considered. The solicitation, issued under number Z4790, requires electronic submission through the vendor Bid Center by 2:00 PM local time on July 16, 2026. Delivery is to be performed in Nashville, Tennessee, with no FOB terms specified and no detailed payment, invoicing, or contract administration information provided. The procurement is handled as a non-federal municipal bid with no reference to federal acquisition regulations, special contract requirements, evaluation weighting, or socioeconomic provisions. The award is likely based on the Lowest Price Technically Acceptable criterion, given the mandatory technical compliance and limited flexibility in product sourcing.
Nashville Electric Service

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 327999
New
DIBBS
KNOBThis contract pertains to the procurement of 113 units of a knob identified by NSN 5355-00-668-4895 under solicitation SPE7L3-26-T-109B, with a delivery deadline 168 days after award. The contract mandates strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation or award date depending on acquisition size. Full and open competition applies, and all supplies must comply with environmental and safety prohibitions: ozone-depleting chemicals are entirely banned, and mercury or mercury-containing compounds are prohibited unless specifically exempted for functional uses such as batteries, fluorescent lights, instrumentation, weapon systems, or NAVSEA-approved chemical reagents. Portable mercury-containing devices must be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. Asbestos is strictly forbidden in all supplied items, and any alternative materials must be formally approved under Clause L30 and Provision 4. Sampling requirements follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. Packaging must meet DLA standards, and government identification must be removed from any non-accepted supplies. All deliveries are to be performed to New Cumberland, PA, and inquiries should be directed to Rajesh Sehgal at the provided contact information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 327999
New
DIBBS
POINTER, DIALThe contract pertains to the procurement of 39 units of POINTER DIAL with NSN 5355-01-222-7975 under solicitation SPE7L1-26-T-810E, with a response deadline of July 20, 2026, and a required delivery timeline of 168 days after order. The item is subject to stringent cybersecurity and data handling requirements, including mandatory CMMC Level 2 certification for any third-party assessment organization involved, and compliance with DLA’s technical and quality standards as defined in the DLA Master List. Technical data associated with this item is classified under export control regulations, either ITAR or EAR, and its disclosure to foreign persons—whether within the U.S. or abroad—is strictly prohibited without explicit authorization. Contractors must possess a valid US/Canada Joint Certification Program certification, complete required DLA training on export-controlled data handling, and pass an approval process before accessing this data. DFARS 252.225-7048 governs the protection of this technical information, and distribution is restricted to approved DLA contractors only. Additionally, all supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted materials. The contract falls under NAICS code 327999 and is managed by the Department of Defense’s Land Supply Chain, with performance located in New Cumberland, Pennsylvania. Primary point of contact is Derek Roberts, reachable via email or phone provided.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 327999
New
DIBBS
KNOBThe contract pertains to the procurement of 13 units of a specific knob component identified by NSN 5355-01-205-2922 and part number 7-511-001085, issued under solicitation SPE7L3-26-T-105J by the Department of Defense through the Defense Logistics Agency. Delivery is required FOB origin with a lead time of 198 days, targeting an original delivery date of March 26, 2027, and a needed ship date of February 4, 2027. The unit price is $13.00 per unit, resulting in a total contract value of $169.00, with zero tolerance for quantity variance. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E standards, including specific preservation methods, wrapping materials, and container specifications, with marking governed by MIL-STD-129 and no special marking required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLAD procedural notes C19 and C20. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition type. The contract is subject to the DoD unit of issue standards and requires adherence to DLA packaging directives RP001 and palletization standards.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 8 days
View Details