Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LADDER, STRAIGHT

Active
SPE8E5-26-T-3890Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 16 straight ladders with part number 5440-01-556-3062 and CAGE code 18876, issued under solicitation SPE8E5-26-T-3890 by the Defense Logistics Agency through the DDSP New Cumberland Facility. Delivery is required within 78 days of award, and the solicitation response deadline is August 17, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item has no shelf life, but it is subject to export control under ITAR or EAR, restricting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessment organizations involved. The contract also includes requirements for proper packaging per DLA standards and the removal of government identification from non-accepted supplies. All covered defense information is protected under applicable regulations, and the place of performance is specified as New Cumberland, Pennsylvania with a ZIP code of 17070-5002.

General Info

Procure 16 straight ladders, deliver in 78 days, ITAR/EAR controlled, CMMC Level 2 required, New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E5-26-T-3890 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
BRANDON WICKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LADDER,STRAIGHT
LADDER,STRAIGHT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 18876 US Army Aviation and Missile Command PN: 13618893
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) UI= EA QUP= 001
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5440-01-556-3062 Quantity: 16 EA Purchase Request: 7017286854QTY: 16 Delivery: 78 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336611
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8E6-26-T-4083
The contract specifies the procurement of high-temperature insulation cement under NSN 5640002722995, with all technical and quality requirements governed by MIL-C-2861E and referenced documents including QAP 13873 and QAP 14153. The material must comply with USCG 164.009 for fire resistance and require mandatory certification per MIL C 2861 paragraphs 4.5.10 and 4.5.11, including toxicity approval from the U.S. Navy. Packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with special emphasis on DLA Packaging Requirements and hazardous material protocols. The product is to be delivered in 45-pound bags, unitized in bulk (BG), with no tolerance for variance in quantity. Inspection and acceptance occur at the destination warehouse in Tracy, California, with delivery required within 188 days under FOB origin terms. A separate line item for First Article Testing is included as a mandatory 1-unit requirement, priced at $1.00, though no separate charge is assumed if not specified. All compliance documentation including CDRLs and Certificates of Quality Compliance must be provided per the DLA Master List of Technical and Quality Requirements, and the contractor is subject to FAR Clause 52.209-3 regarding First Article Test obligations. The contract was issued as a solicitation with a response deadline in August 2026, awarded by DLA District San Joaquin under the NAICS code 336611.
DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336611
New
DIBBS
STUFFING TUBE
Solicitation # SPE4A7-26-T-626H
The contract is for one stuffing tube identified by NSN 5975-00-881-8252 and part number MS24235/1-001SYM2405, with a purchase request number 7017696498 and a unit price of $1.00, totaling one unit. Delivery is required within 158 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards. The product must adhere to specific military specifications including MIL-S-24235/1F and MIL-S-24235C Sup 1, and packaging must follow MIL-STD-129 for marking and labeling. If the item is non-hazardous under FED-STD-313, it must be commercially packaged per ASTM D3951, though DLA requirements take precedence. All packaging and palletization must meet DLA Packaging Requirements for Procurement. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stipulated, and attributes are to be classified under specified verification levels or AQLs. Bare item marking must comply with RQ017, and the item must be identified with the correct part number and revision. The required ship date is January 19, 2027, matching the original delivery deadline, and transportation instructions must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
DIBBS
LADDER, STRAIGHT
Solicitation # SPE8E5-26-T-3858
RED RIVER RECEIVING BLDG

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
HIGH PRESSURE AIR COMPRESSOR
Solicitation # N0040626QS173
The contract is for the repair, overhaul, and replacement of two high-pressure air compressors—Unit No. 1 in Main Machinery Room 1 and Unit No. 2 in Main Machinery Room 2—both manufactured by Curtiss-Wright, model 13/20NL20, identified under APL 061900412. The work is to be performed on-site at U.S. Navy facilities in Japan during the period of performance from August 19, 2026, to October 2, 2026, with delivery and acceptance taking place at Sasebo and Yokosuka under FOB Origin terms, meaning risk transfers to the government at the point of shipment. The contract is issued as a firm fixed price purchase order under solicitation N0040626QS173 by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, with performance located in Japan and administrative oversight managed from Bremerton, Washington. The solicitation specifies an urgent timeline, with responses due by July 31, 2026, and requires full compliance with Department of Defense unique item identification (IUID) standards, mandating that all equipment be marked with a machine-readable Data Matrix symbol compliant with ISO/IEC 16022 ECC200, following MIL-STD-130 for data encoding and validation. Packaging and labeling must adhere to MIL-STD-129, and all invoicing must be processed electronically through Wide Area WorkFlow (WAWF), with no alternative systems authorized. Evaluation of proposals will be conducted on a best value trade-off basis, prioritizing delivery performance first, followed by price, past performance, and technical acceptability as a mandatory threshold. Offers with a Supplier Performance Risk System (SPRS) quality rating of Red or Yellow, or a weighted delivery score below 70, will be deemed unacceptable regardless of pricing competitiveness. Technical acceptability is a go/no-go criterion, and failure to meet it disqualifies an offer from further consideration. Contractors must demonstrate past performance through SPRS data and ensure personnel comply with stringent security protocols, including appropriate Tier 3, Tier 5, or NACI background investigations depending on access levels, mandatory registration in the SPOT system for personnel in Japan, and adherence to antiterrorism and cybersecurity directives. Compliance with representations related to foreign-made unmanned aircraft systems, whistleblower protections, prohibitions on improper payments, and electronic
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
Federal
LPD-18 AIT Support for S/A-30961 K (Voyage Data Recorder); provide
Solicitation # N6264926Q0502
This solicitation, issued by the NAVSUP Fleet Logistics Center Yokosuka Site Sasebo, is exclusively targeted at holders of a current Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR) authorized to operate in Japan, with mandatory active registration in SAM.gov and compliance with DFARS 225.1103(3). Proposals must be submitted by 10:00 AM Japan Standard Time on August 19, 2026, for AIT support services related to the Voyage Data Recorder system S/A-30961 K aboard the USS NEW ORLEANS (LPD-18), with performance scheduled from October 22, 2026, to January 30, 2027. Access to technical specifications is restricted to DoD SAFE, requiring potential offerors to request access via email to the primary point of contact; once granted, access expires after seven days. Offerors without an existing MSRA or ABR in Japan must explicitly state their intention and plan to apply for one alongside any inquiries, or their submissions will not be considered. The solicitation number is N6264926Q0502, classified under NAICS code 336611, with no set-aside applied, and all communication must be directed to Akiko Tashiro at the designated U.S. Navy email address.
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336611
New
Federal
LHA-7 Fan Room and Vent Plenum in 02-114--2-Q; refurbish
Solicitation # N6264926Q0512
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 336611
New
Federal
J--Research Vessel Snavely Hull Replacement
Solicitation # 140G0326Q0170
This contract, identified by solicitation number 140G0326Q0170, is a total small business set-aside under NAICS code 336611 for the replacement of corroded aluminum hull plating on the U.S. Geological Survey’s R/V Parke Snavely, a 2008 Armstrong 34-foot aluminum catamaran. The work involves removing approximately 17.3 square feet of damaged plating concentrated in the starboard engine bay and adjacent forward compartment and replacing it with new marine-grade 5086 aluminum panels that match the original thickness, using full-penetration welding techniques with appropriate alloy wire and shielding gas to ensure structural integrity and minimize heat distortion. All work must adhere to aluminum vessel repair best practices, and the contractor is required to inspect surrounding hull areas for additional corrosion, document all repairs, and provide detailed photographic evidence, an itemized materials and work summary, a final repair report, warranty documentation, and government acceptance forms. The contract is a firm-fixed-price arrangement requiring a comprehensive bid that includes labor, materials, welding consumables, tools, equipment, transportation, mobilization, insurance, permits, inspections, cleanup, and all incidental costs. The period of performance is set from August 17, 2026, to September 17, 2026, with all work conducted on-site at the USGS Marine Facility yard in Santa Cruz, California. The acquisition follows FAR Part 12 procedures and is evaluated under a Lowest Price Technically Acceptable (LPTA) method, where proposals must pass pass/fail gates in Technical Capability, Relevant Experience, and Schedule to be eligible for award, with no weighting applied to non-price factors. To qualify, offerors must demonstrate at least one example of comparable aluminum vessel hull repair experience and a work plan that includes proper welding procedures, heat-distortion control, and inspection protocols. Quoters must submit a valid Unique Entity Identifier (UEI), certify small business status under the 1,300-employee size standard, and comply with the Service Contract Labor Standards statute and Department of Labor Wage Determination 2015-5649, Revision No. 26. Insurance requirements include workers’ compensation as mandated by state and federal law, comprehensive general liability of $500,000 per occurrence, and automobile liability coverage at specified limits. Contractors must also comply with OSHA regulations, report accidents within
Office Of Acquisiton Grants

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
Federal
USS RAFAEL PERALTA (DDG-115) 6JI SIA FARM OUT BUNDLE 2
Solicitation # N6264926RA049
The contract pertains to the ship repair, maintenance, and overhaul of the USS RAFAEL PERALTA (DDG-115) under the 6JI SIA bundle, to be performed at Commander, Fleet Activities Yokosuka Naval Base in Japan, with a period of performance from 28 July 2026 to 22 September 2026. The work is structured around nine Task Group Instructions detailing repair, preservation, and replacement tasks, requiring strict adherence to NAVSEA Standard Items, SRF-JRMC Local Standard Items, and applicable federal and military standards, including MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification using Data Matrix symbols with ISO/IEC 15418 and 15434 encoding. All technical specifications, drawings, and attachments are accessible only through DoD SAFE, requiring offerors to request access via the designated contracting points of contact, Irene Saito and Peter Arrieta. Proposals must be submitted electronically by 29 May 2026 at 10:00 a.m. Japan Standard Time, include a fully completed SF33, Price Proposal Breakdown Form, and current MSRA or ABR certification, and acknowledge all amendments to the solicitation, with Amendment 07 issued on 3 June 2026 incorporating revised technical and pricing information. Contractors must comply with hazardous material identification requirements under FAR 52.223-3 and DFARS 252.223-7001, disclose anticipated sea transportation under DFARS 252.247-7022, and ensure all personnel undergo background investigations, including SF-86 submission and fingerprinting, with results processed through the DoD Central Adjudication Facility, along with annual cyber awareness training for IT access. The contract mandates full compliance with 29 CFR 1915 for occupational and health standards, extends commercial warranties to the Government at no cost, and strictly controls the handling of Controlled Unclassified Information in accordance with SRF-JRMC policies. Final inspection and acceptance occur at the SRF-JRMC facility in Yokosuka, with the Government retaining sole authority to reject non-conforming work under DFARS 252.217-7005. No contract value, CLIN details, or specific evaluation factors are provided in the documentation,
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336611
New
Federal
LPD-18 Various Jettison Locker; refurbish
Solicitation # N6264926Q0514
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 336611
New
Federal
LPD-18 No.3 SSDG Crankshaft FR and RR Seal; replace
Solicitation # N6264926Q0513
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 336611
New
Federal
52000QR260027124- CGC Charles Moulthrope Waterborne Hull Cleaning, Inspection and Anode Zinc Renewal Services
Solicitation # 52000QR260027124
The United States Coast Guard is seeking firm-fixed price quotations for waterborne hull cleaning, video inspection, and zinc anode renewal services for the USCGC Charles Moulthrope, to be performed at Berth SLOY5 with Toll Offshore Petroleum Services in Singapore. The work must be completed during one of two narrow windows—either August 11–12, 2026, or August 13–14, 2026—with the first date being the preferred schedule. This requirement is classified as an unusual and compelling urgency under FAR 13.106-1(b), as delays would risk mission continuity. All offerors must submit detailed cost breakdowns including unit and total pricing, payment terms, discount for prompt payment, UEI and CAGE codes, and must be registered in SAM.gov with an active Unique Entity ID prior to submission. Quotations must be received by August 7, 2026, at 2:00 p.m. Eastern Time and emailed to the specified point of contact with a carbon copy to the contracting officer. The procurement follows simplified acquisition procedures under FAR Part 13 and commercial item procedures under FAR Part 12, with NAICS code 336611 and no set-aside initially planned, though the government reserves the right to award it as a small business set-aside if advantageous. The contract will be awarded based on best value, considering technical compliance, price, past performance, and quality, with an evaluation under FAR 52.212-2. Offerors must provide warranty information and comply with all applicable FAR clauses, including those on trafficking in persons, equal opportunity, Buy American, electronic fund transfers, and prohibition of convict labor. The government may award on an all-or-none basis, selecting the lowest aggregate price rather than awarding separate contracts for individual items. Failure to provide a valid Letter of Authorization upon request will result in a determination of non-responsibility. All submissions must be on company letterhead and adhere strictly to the specified format and deadlines.
Sflc Procurement Branch 1(00080)

POSTED

about 21 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 493190
New
DIBBS
Specialized Packaging and Labeling Services
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332211
New
DIBBS
Precision Milling Cutter Supply
Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
Supply of Reflective Tape (Red, 6 Inches Wide, 1800 Inches per Roll)The contract entails the procurement and delivery of 158 rolls of red reflective tape, each measuring 6 inches in width and containing 1,800 inches of material, fully compliant with federal standards for reflectivity, durability, and use in hazardous material labeling. The tape must meet stringent performance criteria to ensure visibility and safety in critical applications, particularly within defense and transportation environments. The requirement is part of a subcontract under a Women-Owned Small Business Set-Aside, designated by NAICS code 325520, and is being managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance of this contract is required to take place at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted no later than August 17, 2026. All submissions must adhere to federal specifications ensuring the product's reliability under demanding conditions, and the award will be restricted to certified Women-Owned Small Businesses as mandated by the set-aside classification. The contract details are accessible via the DIBBS platform at the provided link, and timely compliance with delivery and quality requirements is essential for successful contract execution.
Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332320
New
DIBBS
Supply of Welding Electrodes (NSN: 3439016664749)The contract pertains to the supply and delivery of 63 units of commercial off-the-shelf welding electrodes, with each unit containing 10 electrodes, for use in metal fabrication and repair operations. All electrodes must meet federal specifications and are identified by the National Stock Number 3439016664749. The requirement is issued under a subcontract with a response deadline of August 17, 2026, and was posted on August 5, 2026. The work is to be performed at the New Cumberland facility with a zip code of 17070-5002, under the authority of the Department of Defense through the DDSP New Cumberland Facility. The North American Industry Classification System code for this requirement is 332320, indicating it falls within the forge and stamping industry sector. No set-aside type or point of contact details are provided in the available data.

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Quality Certification and Documentation Services
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation
Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Metal Marking and Identification
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331222
New
DIBBS
Precision Steel Bar Manufacturing and Supply
Steel Wire Drawing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to Destination (FOB Destination)The contract requires the transport and delivery of packaged filter elements to the specified destination under FOB Destination terms, meaning the seller retains responsibility for all costs and risks until the goods arrive and are accepted at the destination. Proof of delivery and inspection readiness at the location are mandatory, ensuring the recipient can verify receipt and conduct immediate inspections upon arrival. The place of performance is clearly designated as New Cumberland with a zip code of 17070-5002, and the responsible agency is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The contract falls under NAICS code 484220, which corresponds to specialized freight trucking, indicating the need for specialized logistics handling. This is a subcontract opportunity with a response deadline of August 17, 2026, and it was posted on August 5, 2026, providing potential respondents approximately twelve business days to prepare and submit their proposals. All parties must ensure compliance with delivery timing, documentation requirements, and inspection protocols to meet contractual obligations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and DocumentationThe contract requires identification of hazardous materials within packaging or products, accurate preparation of Material Safety Data Sheets, and submission of sample hazard warning labels that meet federal and Defense Logistics Agency standards. All tasks must align with stringent regulatory requirements to ensure safety, compliance, and proper communication of risks associated with hazardous substances. The work is tied to a specific location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating that performance is expected to occur at or near this facility. The project falls under NAICS code 541690, which classifies it as other scientific and technical consulting services, confirming the nature of the work as technical and compliance-focused rather than manufacturing or logistical. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and it is structured as a subcontract, meaning the winning party will be working under a primary contractor rather than directly with the Department of Defense. The contracting office is the DDSP New Cumberland Facility under the Department of Defense, emphasizing this is a defense-related procurement requiring adherence to military and federal safety protocols.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Palletization, and Labeling ServicesThe contract requires the provision of military-compliant packaging, palletization, and labeling services for filter elements in accordance with ASTM D3951, MIL-STD-129, and DLA RP001 standards. All work must meet rigorous Department of Defense specifications to ensure compatibility with military logistics and supply chain operations, including proper identification, handling, and documentation of shipments. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the award is structured as a subcontract under the NAICS code 493190, indicating non-warehouse warehousing and storage activities. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, and all proposals must align with the precise technical and procedural requirements outlined in the referenced military and industry standards. Interested parties must submit their responses through the official DIBBS portal before the deadline to be considered for award.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Filter Element Supply and ManufacturingThe contract entails the manufacture or supply of eight units of a specific filter element identified by NSN 4610015923060, fully compliant with applicable military and federal technical and quality standards. The work is being procured under a subcontract solicitation issued by the DDSP NEW CUMBERLAND FACILITY, a unit within the Department of Defense, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under the NAICS code 332999 for other fabricated metal product manufacturing, indicating the specialized nature of the component production. Responses must be submitted by the deadline of August 17, 2026, with the solicitation made available to potential suppliers through the DIBBS platform as of August 5, 2026. All suppliers are expected to meet stringent defense-related specifications regarding material, construction, testing, and documentation to ensure interoperability and reliability in operational environments.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details