Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LAMP, FLUORESCENT

Active
SPE4A6-26-T-14NPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of F30T8CW low mercury fluorescent lamps under solicitation SPE4A6-26-T-14NP, with a total quantity of 657 units to be delivered within 79 days to Industries of the Blind Inc in Greensboro, NC. The lamps are classified as commercial off-the-shelf items and must comply with stringent technical and quality standards, including TCLP compliance per 40 CFR 261 and strict restrictions on mercury content, allowing only functional mercury in specified applications such as fluorescent lighting, with mandatory secondary containment and shock-proof design per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special fragile markings, and palletization follows DLA packaging requirements. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are subject to heightened verification levels due to critical application status. The contract enforces complete removal of government identification from non-accepted supplies and mandates adherence to the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date. Delivery is FOB origin, inspection and acceptance occur at destination, and the unit of issue is each, with zero variance allowed in quantity. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, under NAICS code 335139, managed by the Department of Defense’s ASC Commodities Division.

General Info

657 F30T8CW low mercury fluorescent lamps delivered in 79 days to Greensboro, NC, meeting strict DOE and DLA standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335139 - Electric Lamp Bulb and Other Lighting Equipment ManufacturingView NAICS

Place of Performance

6920 WEST MARKET STREET, GREENSBORO, NC, 27409, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14NP DLA Aviation Automated Simplified Acquisition

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ROBERTO ROLDAN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LAMP,FLUORESCENT
LAMP, FLUORESCENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
LAMP INDUSTRY TRADE NUMBER: F30T8CW LOW MERCURY LAMPS ONLY
LAMPS MUST BE TCLP COMPLIANT I/A/W 40 CFR 261
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
CRITICAL APPLICATION ITEM
SPE4A6-26-T-14NP
SECTION B
TDP Rev A Gen 1 IAW BASIC DRAWING NR 13873 LAMPSTANDARD REVISION NR DTD 12/21/2011 PART PIECE NUMBER: F30T8CW
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014364394 0001 EA 657.000
NSN/MATERIAL:6240001522985
DELIVERY (IN DAYS):0079
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
UY8614
INDUSTRIES OF THE BLIND INC
6920 WEST MARKET STREET
GREENSBORO NC 27409
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
UY8614
INDUSTRIES OF THE BLIND INC
6920 WEST MARKET STREET
GREENSBORO NC 27409
US
SPE4A6-26-T-14NP
SECTION B
PR: 7014364394 PRLI: 0001 CONT’D
Need Ship Date:04/30/2026 Original Required Delivery Date:04/24/2026
SPE4A6-26-T-14NP NSN/Part Number: 6240-00-152-2985 Quantity: 657 EA Purchase Request: 7014364394QTY: 657 Delivery: 79 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
Federal
Towed Solar light tower
Solicitation # W911S226U3949
The contract is for two towed solar-powered light towers under solicitation number W911S226U3949, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. It is a Small Business Set Aside with a NAICS code of 335139, exclusively available to small businesses, and the response deadline is August 12, 2026, at 8:30 PM Eastern Time. The equipment required consists of towable, solar-powered lighting systems designed for deployable use in field conditions, with performance expected at Fort Drum, NY. Morgan Cady is the primary point of contact, reachable via email at morgan.p.cady.civ@army.mil or by phone at 315-772-1057. This is a combined solicitation under SAM.gov, and offers must be submitted through the official portal before the deadline to be considered.
W6QM Micc-Ft Drum

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 335139
New
Federal
62--FLOODLIGHT,ELECTRIC
Solicitation # SPE8E726T3546
The contract is a solicitation for 30 electric floodlights, identified by NSN 6230015978436, to be delivered to DLA Dist San Joaquin with a delivery timeline of 63 days after award. The approved source for this item is vendor code 65442 9440, and only electronic quotes are accepted; hard copies of the solicitation are not available. The solicitation, numbered SPE8E726T3546, was posted on August 6, 2026, and responses must be submitted by August 17, 2026. This procurement is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, with the NAICS code 335139. All responsible sources meeting the SDVOSB criteria may submit a quote provided it is received on time. No specifications, plans, or drawings are provided, and inquiries must be directed via email to the designated point of contact listed in the solicitation’s block 5, accessible through the official DIBBS website or the provided SAM.gov link. The contracting office is located in Philadelphia, Pennsylvania, under the Department of Defense’s DLA Troop Support.
DLA Troop Support

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
Federal
62--LIGHT,HEAD,UTILITY
Solicitation # SPE8E926Q0667
The contract involves the procurement of 50 units of NSN 6230016220311 LIGHT, HEAD, UTILITY, distributed across multiple military locations with quantities ranging from 1 to 40 units per delivery point, including bases such as 0602 CS BN, FB5808, FB5270, FB5518, FB4915, FB5205, FB6520, FB6521, FB4804, FB5004, and FB5587. All deliveries are required within 60 days after order award, with the approved source identified as 0BJZ8 HS3-A-BK. The solicitation, numbered SPE8E926Q0667, is a Small Business Set Aside under NAICS code 335139, issued by DLA Troop Support under the Department of Defense, and is exclusively available electronically through the SAM.gov portal. Respondents must submit quotes electronically by the deadline of August 13, 2026, and no hard copies or technical specifications are provided, leaving responsibility on offerors to ensure compliance with the stated item and delivery requirements. All responsible sources are eligible to quote, and questions must be directed to the listed point of contact via email, with no additional drawings or plans available for reference.
DLA Troop Support

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 335139
New
Federal
62--FLASHLIGHT
Solicitation # SPE8E726T3542
The U.S. Department of Defense through DLA Troop Support is seeking to procure 1,000 flashlights with NSN 6230015560434 under solicitation SPE8E726T3542, which is a combined solicitation set aside exclusively for Historically Underutilized Business Zone (HUBZone) certified small businesses. Quotes must be submitted electronically by the deadline of August 17, 2026, and only electronic submissions will be accepted; hard copies are not available. The flashlights are to be delivered to DLA Dist San Joaquin with a delivery timeline of 99 days after award. Approved sources for this procurement are limited to three qualified vendors identified by their CAGE codes. No technical specifications, plans, or drawings are provided to potential offerors, and all responsible HUBZone entities are encouraged to respond if they meet the requirements. The solicitation can be accessed online via the provided SAM.gov link, and all inquiries must be directed to the designated buyer email listed in the official document. The contracting office is located in Philadelphia, Pennsylvania, and the NAICS code 335139 indicates the classification under Other Electrical Equipment and Component Manufacturing.
DLA Troop Support

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
SLED
Strobe Light
Solicitation # Z4942
The solicitation calls for Flasher Strobe Poles equipped with a red strobe light featuring a 5 to 7 mile visibility range, mounted with a heavy duty ratchet strap designed for secure transportation of poles. Each unit must include two orange flags and come with required batteries already installed. Approved manufacturers are limited to HI-LINE HL7015-RO or AIRCRAFT 7015-RO, with equal alternatives permitted. The equipment is intended for use by Nashville Electric Service in Tennessee, specifically for pole-mounted transportation applications requiring high visibility and durability. The solicitation, numbered Z4942, was posted on August 6, 2026, with responses due by August 10, 2026, at 7:00 PM Eastern Time. All bids must be submitted through the agency’s vendor portal, and inquiries should be directed to the primary procurement contact, K. Kegley, at the provided phone number and email address.
Nashville Electric Service

POSTED

4 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 335139
New
DIBBS
Emergency Light Manufacturing and Assembly
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 335139
New
DIBBS
Manufacture and Supply of Blackout Light (NSN: 6220015628419)The contract mandates the manufacture, inspection, and delivery of one unit of a military-spec blackout light identified by NSN 6220015628419, adhering strictly to all applicable federal standards. The unit must be delivered FOB origin no later than August 17, 2026, with full compliance required throughout production and quality control processes. The procurement is classified as a subcontract under NAICS code 335139 and is managed by the Defense Logistics Agency under the Department of Defense. Delivery terms specify that ownership and responsibility transfer to the buyer at the point of origin, placing the onus on the supplier to ensure timely, accurate, and defect-free shipment. The contract was posted on August 5, 2026, and is tied to a specific award identification number, indicating it is part of an existing defense procurement framework.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 335139
New
DIBBS
Supply of Chemiluminescent Light Units (NSN: 6260-01-341-8714)The contract calls for the procurement and delivery of 120 chemiluminescent light sticks identified by NSN 6260-01-341-8714, adhering strictly to military specifications for performance, durability, and safety. The vendor must ensure full compliance with all applicable packaging, labeling, and hazardous materials handling protocols, including proper classification, transport documentation, and containment measures to meet Department of Defense standards for hazardous substances. The units are to be delivered in accordance with military logistics requirements, with attention to serial tracking, lot control, and condition at time of delivery. This subcontract, issued by DLA Dist San Joaquin under the Department of Defense, is open for responses through August 11, 2026, with a solicitation posting date of August 5, 2026. The North American Industry Classification System code 335139 indicates the work falls within other electrical equipment and component manufacturing. The place of performance and exact delivery location are not specified beyond the agency's jurisdiction, but the contractor must be prepared to comply with all defense logistics protocols for secure, traceable, and timely delivery. All submissions must meet the technical and regulatory criteria established by the DLA to ensure mission readiness and safety in operational environments.
DLA DIST SAN JOAQUIN

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 335139
New
DIBBS
Procurement and Delivery of Portable Electric Light Towers
DLA DIST SAN JOAQUIN

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
Navigational Light SupplyThe contract entails the procurement and delivery of a navigational light identified by NSN 6220008801642, which must fully comply with federal specifications governing performance, safety, and durability. The supplier is responsible for ensuring proper packaging, accurate labeling, and complete hazardous materials documentation to meet all regulatory requirements for transportation and handling. This subcontract falls under NAICS code 335139, indicating it relates to other electrical equipment and component manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, and the contract is issued under award number SPE8E926V2073, with performance expected to occur wherever the Department of Defense requires it, without specified geographic limitations. All deliverables must adhere strictly to military standards to ensure operational readiness and compatibility with existing systems.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 335139
New
DIBBS
Supply of Incandescent Lamp (NSN: 6240017189832, Part No: R133302)The contract pertains to the procurement and delivery of a single incandescent lamp identified by NSN 6240017189832 and part number R133302, with all packaging, labeling, and documentation required to meet military compliance standards including full traceability throughout the supply chain. The item must be shipped using the fastest available traceable method and delivered to RDD 777 in San Diego no later than August 17, 2026. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and classified under NAICS code 335139 for other electrical equipment and component manufacturing. The contract was posted on August 5, 2026, and is linked to the award record through the DIBBS system under contract number SPE7LX22D0068 with delivery identifier SPE7L126FABE4.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details