Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Land Surveying

Active

State & Local

Response Deadline09/23/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for professional land surveying services to support prime contractors on Texas Facilities Commission laboratory projects. The selected provider will be responsible for executing boundary surveying and topographic mapping to establish critical site data necessary for civil design. All deliverables must include detailed survey plats and topographic maps, and the contractor is required to hold a Registered Professional Land Surveyor license. The project is managed by the Facilities Design & Construction agency for the state of Texas under NAICS code 541370. Interested parties must submit their responses by the deadline of September 23, 2026. Further details and application processes are available through the OpenGov procurement portal.

General Info

Professional land surveying services for Texas Facilities Commission laboratory projects due September 23, 2026.

Agency

Texas → Facilities Design & ConstructionView Agency

NAICS

541370 - Surveying and Mapping (except Geophysical) ServicesView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 0010042.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFQ for Engineering Site Services for New Public Health Laboratory (DSHS / DPHL2)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 24

subcontract

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 08:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Facilities Design & Construction

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Facilities Design & Construction

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs professional land surveying for prime contractors on Texas Facilities Commission laboratory projects. Executes boundary surveying and topographic mapping to establish site data for civil design. Requires a Registered Professional Land Surveyor (RPLS) license. Delivers survey plats and topographic maps.

Similar Contracts

Same NAICS industry code

Boundary and Topographical SurveyingThis subcontract involves providing professional land surveying services for prime contractors on FDACS projects located at the Bronson Animal Disease Diagnostic Laboratory in Kissimmee, Florida. The scope of work includes conducting boundary surveys, topographical mapping, and site analysis to support civil engineering and site planning efforts, culminating in the delivery of certified survey maps and drawings. The project is managed by the Florida Department of Agriculture and Consumer Services under NAICS code 541370. Due to the nature of the work, the performing party must hold a professional registration to practice in the State of Florida. The solicitation was posted on September 16, 2026, with a response deadline of September 21, 2026.

Department of Agriculture and Consumer Services

POSTED

about 17 hours ago

DEADLINE

Land SurveyingThis subcontract opportunity is for professional land surveying and boundary mapping services to support prime contractors on projects for the County of Santa Cruz General Services Department. The scope of work includes conducting topographic and boundary surveys, as well as the preparation of legal descriptions, survey maps, plats, and boundary reports. Eligible candidates must hold a valid California state license and possess at least five years of experience working on public sector projects. The solicitation was posted on September 16, 2026, with a response deadline of October 16, 2026. Performance of these services will take place in Santa Cruz, California.

County of Santa Cruz General Services Department

POSTED

about 17 hours ago

DEADLINE

Topographic and Boundary SurveyingThis subcontract for the City of Oceanside involves providing professional topographic and boundary surveying services for lift station projects. The selected contractor will be responsible for mapping property lines and creating one-foot contour intervals while collecting precise data on surface features such as utilities, paving, concrete, walls, and equipment pads. All work must be performed using high-precision surveying equipment and delivered as complete layered base maps in Civil 3D and AutoCAD electronic formats. The opportunity is categorized under NAICS code 541370 and is located in Oceanside, California. Interested parties must submit their responses by the deadline of October 13, 2026.

City of Oceanside

POSTED

about 17 hours ago

DEADLINE

War Memorial Condition Surveying and InspectionThis subcontract for the London Borough of Hillingdon involves performing routine inspections and technical condition assessments for fourteen war memorials. The selected provider will work for prime contractors to conduct site visits aimed at identifying structural or surface defects through the use of specialized stone and metal degradation inspection tools. The scope of work requires the delivery of professional conservation reports and detailed condition assessment documentation. This project is categorized under NAICS code 541370, with a response deadline set for October 29, 2026.

London Borough of Hillingdon

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Urban & Strategic PlannerThe City of Beaumont in California is seeking an Urban and Strategic Planner for a subcontracting opportunity under NAICS code 541370. The selected professional will develop long-term strategic frameworks for facility growth, utilizing GIS software for spatial analysis, land use analysis, and capacity planning. The primary objective is to align facility needs with the City's General Plan through stakeholder interviews and technical assessments. Qualified candidates must hold an AICP certification to be eligible for this role. The project deliverables include a comprehensive Facility Planning Study and a Strategic Growth Roadmap. Interested parties must submit their responses by the deadline of October 15, 2026, for work to be performed in Beaumont, California.

City of Beaumont

POSTED

about 18 hours ago

DEADLINE

Surveying ServicesThis subcontract opportunity with the City of West Hollywood involves providing professional surveying and monument re-establishment services for prime contractors working on city facility projects. The scope of work includes surveying reconstruction areas, re-establishing monuments, completing corner records, and delivering comprehensive survey reports. The project falls under NAICS code 541370 and is located in West Hollywood, California. Interested parties must respond by the deadline of September 24, 2026.

City of West Hollywood

POSTED

about 18 hours ago

DEADLINE

Construction SurveyingThis subcontract for construction surveying supports prime contractors on street improvement projects within the City of Montebello, California. The scope of work includes performing monument re-establishment, conducting office research of notes and plats, marking removal limits, performing grade staking, and tying or relocating utilities. The selected provider is responsible for delivering comprehensive survey reports, grade stakes, and re-established survey monuments recorded with Los Angeles County. This opportunity falls under NAICS code 541370 and requires responses by September 23, 2026.

City of Montebello

POSTED

about 19 hours ago

DEADLINE

Land SurveyingThis subcontract for land surveying involves performing boundary and topographic surveying on a five acre parcel for prime contractors developing land in Cooper City, Florida. The scope of work includes boundary marking, topographic mapping, and the execution of ALTA/NSUR surveys, culminating in the delivery of certified survey maps. To be eligible, the contractor must be a Licensed Professional Surveyor and Mapper in the state of Florida. The opportunity is categorized under NAICS code 541370 and is managed by Administrative Services. Interested parties must submit their responses by the deadline of November 2, 2026.

Administrative Services

POSTED

about 20 hours ago

DEADLINE

in about 2 months

Pre- and Post-Dredge SurveyingThis subcontract opportunity involves performing pre- and post-dredge hydrographic surveys for prime contractors on US Army Corps of Engineers projects located at MCAS Cherry Point, North Carolina. The primary objective is to determine sediment levels and verify final depths through bathymetric mapping, sounding, and GIS data collection. Technical execution requires the use of multibeam or single-beam echosounders and GPS/GNSS equipment to produce bathymetric maps, volume calculations, and detailed survey reports. Managed by the Department of Defense under the W074 Endist Wilmington agency, the project falls under NAICS code 541370. The solicitation was posted on September 16, 2026, with a response deadline of October 7, 2026. Performance of these specialized surveying services will take place in the 28533 zip code area.

W074 Endist Wilmington

POSTED

about 21 hours ago

DEADLINE

Marine Surveying & Field Inspection ServicesThis subcontract for Marine Surveying and Field Inspection Services supports the Department of Defense via the W2SD Endist Philadelphia for USACE Marine Design Center projects. The selected provider will perform onsite vessel inspections, shipyard oversight, condition evaluations, and forensic investigations for prime contractors. Key technical responsibilities include conducting sea trials utilizing HP measurement tools and propulsion shaft line instrumentation, all while adhering to ABS and USCG inspection standards to deliver comprehensive reports and data assessments. The opportunity is designated as a total Small Business Set Aside under NAICS code 541370. Interested parties must submit their responses by October 30, 2026, following the posting date of September 16, 2026.

W2SD Endist Philadelphia

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Aerosonde UAS Operational Support Transitions and Mine Countermeasures (MCM) Sensor Integration

Solicitation # N00019-26-RFPREQ-WPM263-0281

The Naval Air Systems Command intends to award sole-source modifications to Textron Systems Corporation under Basic Ordering Agreement N0001921G0008 for specialized engineering, integration, and operational support of the Aerosonde Unmanned Aircraft System. The scope of work includes operational site transitions and mobilization support for land and shipboard assets, as well as non-recurring engineering for the integration of mine countermeasure sensor payloads. These services are expected to be performed over a period of up to twelve months. Textron Systems Corporation is designated as the sole provider because it is the original equipment manufacturer and developer of the Aerosonde UAS, maintaining exclusive proprietary control over the necessary technical data and flight control software. This action is pursued under the authority of 10 U.S.C. 3204(a)(1) to avoid unacceptable delays in fleet readiness and to maintain airworthiness certifications. This notice is for informational purposes and is not a request for competitive proposals.

Naval Air Systems Command

POSTED

about 21 hours ago

DEADLINE

Kier Infrastructure - Engineering Bridge Structural Survey

Solicitation # C4N119331821

Kier Infrastructure is seeking to establish a dedicated supply chain to perform a series of intrusive and non intrusive structural surveys on bridges spanning roads and rail assets. These activities are essential for supporting design development and Environmental Impact Assessment requirements. The scope of work encompasses visual and dimensional surveys, 3D mapping, masonry coring, and ground breaking tasks such as trenching and foundation pitting. This solicitation, identified by number C4N119331821, was posted on September 16, 2026, with a response deadline of September 22, 2026. The project is managed by Kier Infrastructure under the Government of the United Kingdom, with Mark Thompson serving as the primary point of contact. The organization is based in Clippers Quay, United Kingdom.

Kier Infrastructure

POSTED

DEADLINE

More opportunities from Texas → Facilities Design & Construction

Same awarding agency

Electrical Switchgear & ControlsThis subcontract opportunity with the Texas Facilities Design and Construction agency involves the supply and installation of electrical switchgear and lighting controls for office building projects. The selected provider will be responsible for installing main switchgear and programming lighting control systems to ensure the delivery of fully operational power distribution and lighting control systems for prime contractors. Under NAICS code 238210, the contract requires all personnel to successfully pass criminal background checks. Interested parties must submit their responses by October 14, 2026, following the posting date of September 15, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Electrical Systems (Core)This subcontract for Electrical Systems (Core) involves the installation of electrical infrastructure for Texas Facilities Commission office building projects. The scope of work includes the installation of electrical conduits, boxes, grounding, bonding, raceways, and general electrical wiring to support prime contractors. All personnel assigned to these projects are required to pass criminal background checks to ensure compliance with security standards. Managed by the Facilities Design & Construction agency in Texas under NAICS code 238210, the contract focuses on the delivery of fully installed electrical systems. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Plumbing & FixturesThis subcontract opportunity with the Texas Facilities Design and Construction agency involves the installation of plumbing fixtures and associated piping for office building projects. The selected contractor will be responsible for installing sinks, toilets, and other essential plumbing components to deliver a fully completed system for prime contractors. All personnel assigned to the project must successfully pass criminal background checks. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026. This project falls under NAICS code 238220.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC & Mechanical SystemsThis subcontract for HVAC and Mechanical Systems involves the installation of mechanical systems, hydronic piping, and centrifugal fans for prime contractors working on Texas Facilities Commission office building projects. The scope of work specifically includes the installation of HVAC equipment and piping for hydronic systems to deliver a fully operational heating, ventilation, and air conditioning system. Managed by the Facilities Design & Construction agency in Texas under NAICS code 238220, the contract requires all personnel to pass criminal background checks. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Fire Alarm SystemsThis subcontract opportunity with the Texas Facilities Design and Construction agency involves the installation and commissioning of fire alarm systems for office building projects. The selected provider will be responsible for wiring, installing sensors and alarms, and conducting system testing to ensure full fire safety compliance, ultimately delivering a certified operational system. All personnel assigned to these projects must successfully pass criminal background checks. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026. This work falls under NAICS code 238210 and is intended for prime contractors operating within the Texas Facilities Commission framework.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Specialties (Louvers & Vents)This subcontract for Specialties (Louvers & Vents) involves the supply and installation of interior and exterior louvers and ventilation components for Texas Facilities Commission office building projects. The selected provider will work under prime contractors to ensure all installations adhere to Division 10 specifications. The contract is managed by the Facilities Design & Construction agency in Texas under NAICS code 238990. A critical requirement for all personnel assigned to the project is the successful completion of criminal background checks. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Acoustic CeilingsThis subcontract opportunity is for the installation of acoustic panel ceilings for prime contractors working on Texas Facilities Commission office building projects. The scope of work involves the installation of ceiling grids and acoustic panels in strict accordance with Division 09 specifications to deliver a completed suspended acoustic ceiling system. The project is managed by the Facilities Design & Construction agency in Texas under NAICS code 238310. A critical requirement for this contract is that all personnel must successfully pass criminal background checks. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026.

Drywall and Insulation Contractors

POSTED

DEADLINE

Doors & WindowsThis subcontract opportunity is for the supply and installation of interior aluminum frames and aluminum window systems for prime contractors working on Texas Facilities Commission office building projects. The selected provider will be responsible for performing all installations in accordance with Division 08 specifications and delivering fully installed window and frame systems. The contract is managed by the Texas Facilities Design and Construction agency under NAICS code 238150. A critical requirement for this engagement is that all personnel must successfully pass criminal background checks. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026.

Glass and Glazing Contractors

POSTED

DEADLINE

Roofing & WaterproofingThis subcontract for Roofing and Waterproofing involves the installation of roof accessories and joint sealants for prime contractors working on Texas Facilities Commission office building projects. The scope of work requires the application of roofing systems and joint sealants in strict accordance with Division 07 specifications to ensure a completed, watertight roof and properly sealed joints. The project is managed by the Facilities Design & Construction agency under NAICS code 238160. A critical requirement for all personnel assigned to this contract is the successful completion of criminal background checks. The solicitation was posted on September 15, 2026, with a response deadline of October 14, 2026.

Roofing Contractors

POSTED

DEADLINE

RFQ for CMR for Texas Finance Building - New Building

Solicitation # 0008789

The Texas Facilities Commission is soliciting a Construction Manager-at-Risk (CMR) for the new construction of the Texas Finance Commission Office Building, Project 26-029-2597, located at 3500 Jackson Ave, Austin, Texas. This procurement follows a two-step award process based on best value. Step one evaluates company experience and qualifications, while step two requires pricing from the top five or fewer ranked respondents. The project is divided into two phases: a pre-construction period estimated at 365 calendar days and a construction phase also estimated at 365 calendar days, which must begin within 30 days of the Notice to Proceed. The selected CMR must demonstrate a bonding capacity of 55 million dollars and provide a 25,000 dollar bid bond during the solicitation process. Key requirements include compliance with Texas Government Code Chapter 2269, prevailing wage rates, the Drug-Free Workplace Act, and the use of the E-Verify system. The contract incorporates the 2015 Uniform General Conditions and 2018 Supplementary General Conditions, requiring the CMR to develop a Guaranteed Maximum Price (GMP) proposal and a HUB subcontracting plan. Additionally, the CMR must provide a project-specific quality control plan and ensure all iron or steel products comply with Texas Buy America regulations.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Traffic Flow AnalysisThis subcontract opportunity for Traffic Flow Analysis involves performing traffic flow studies for prime contractors on Texas Facilities Commission laboratory projects. The selected provider will analyze current traffic patterns, project future flow based on facility usage, and offer professional recommendations for roadway improvements and site access. The primary deliverable for this engagement is a comprehensive Traffic Flow Study Report. To qualify, the provider must employ a Professional Traffic Engineer or a certified transportation planner. The project falls under NAICS code 541330 and is managed by the Facilities Design and Construction agency for the state of Texas. Interested parties must submit their responses by the deadline of September 23, 2026.

Engineering Services

POSTED

DEADLINE

Civil Engineering Design (Site Development)This subcontract opportunity is for civil engineering design and site development services supporting Texas Facilities Commission laboratory projects. The selected provider will work under prime contractors to deliver schematic design drawings and final construction documents, focusing on grading, drainage, utilities, stormwater management, and roadway design. Technical execution requires the use of AutoCAD Civil 3D and BIM software. Qualified candidates must hold a Professional Engineer license to be eligible for this role. The project falls under NAICS code 541330 and is managed by the Texas Facilities Design and Construction agency. Interested parties must submit their responses by the deadline of September 23, 2026.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS