This Subcontract opportunity from Texas was posted on December 5, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Landscape Architecture Design Services

Closed

State & Local

Submission Closed01/06/2026, 02:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330

New

GLCA 318882 - Provide Lake Access to Bullfrog Area

Solicitation # glca-318882-provide-lake-access-bullfrog-area

This solicitation, issued by WW Clyde & Co, seeks design services to provide lake access to the Bullfrog Area in Utah. The scope of work includes the design of a 150-foot-wide concrete launch ramp with a 10.5% grade servicing water surface elevations between 3700 and 3450, a 16-acre asphalt parking area, and a two-lane asphalt access road connecting the parking area to US 276. The project is set aside for small businesses, including SDVOSB, WOSB, HUBZone, and SDB certifications, and specifically includes an Indian Small Business Economic Enterprise requirement. Interested parties must respond by November 12, 2026. The primary point of contact for this opportunity is Chanel Hope.

POSTED

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Eligible firms should operate under NAICS codes related to administrative management, engineering services, computer systems design, or public relations and technical writing. Interested parties must submit their responses by November 17, 2026. Primary coordination for this opportunity is managed by Liz Jordan-Wettstein.

Aanko Technologies Inc.

POSTED

DEADLINE

First Article Testing (FAT) for Lower BushingsThis subcontract involves performing First Article Testing for lower bushings to support prime contractors under the DLA Weapons Support ASC Commodities Division. The primary objective is to validate the manufacturing process and product specifications by verifying material hardness, dimensions, and tolerances against the technical data package. This quality assurance process utilizes precision measurement tools and Coordinate Measuring Machines to ensure all components meet strict requirements. The successful contractor is responsible for delivering a validated first-article sample along with a comprehensive FAT report. The work is associated with NAICS code 541330 and is to be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) for Circuit Card AssemblyThis subcontract involves performing First Article Testing for Circuit Card Assemblies to support prime contractors on DLA Weapons Support Maritime Supply Chain projects. The primary objective is to validate manufacturing processes and product quality by ensuring all items adhere to strict technical specifications. This process utilizes specialized testing equipment to verify critical functions and tolerances, culminating in the delivery of a formal FAT Report and final validation of the first article. The project is managed under the Department of Defense for the DLA Weapons Support Maritime Supply Chain, with performance taking place in New Cumberland. The opportunity is categorized under NAICS code 541330, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract, titled First Article Test (FAT) Validation and Certification, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves performing and documenting First Article Testing for prime contractors on Defense Logistics Agency supply contracts. The primary objective is to verify branched wiring harnesses against specific drawings and Quality Assurance Provisions using electrical and physical measurement equipment to validate all necessary properties. The selected contractor is responsible for submitting all test results for government approval and delivering a final FAT Certification report along with an approved first-article sample. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, with the place of performance located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article and Production Lot TestingThis HUBZone set-aside subcontract involves performing critical validation testing for prime contractors on aircraft component projects for the Defense Logistics Agency Weapons Support ASC Supplier Oper AE and AF Div. The scope of work focuses on executing First Article Tests to validate initial production and Production Lot Tests to maintain ongoing consistency. Using specialized metrology and testing equipment, the contractor will verify dimensional accuracy and structural integrity in accordance with NAV drawings, ultimately delivering comprehensive test reports and certifications of compliance. The project is categorized under NAICS code 541330 and will be performed in Tracy, California. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) and Inspection ServicesThis subcontract for First Article Testing (FAT) and Inspection Services supports prime contractors delivering to the DLA Weapons Support Land Supply Chain under the Department of Defense. The primary objective is to verify that part dimensions and functionality align strictly with technical drawings to satisfy DLA Inspection and Acceptance at Origin requirements. This process involves the use of specialized equipment, including CMM, calipers, and gauges, to ensure total compliance. The selected provider is responsible for delivering a validated first-article sample along with comprehensive test reports and FAT Certification. The work is designated under NAICS code 541330 and will be performed in Phoenix, Arizona. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Construction Inspection & Contract AdministrationThis subcontract for Construction Inspection and Contract Administration involves providing field inspection and administrative oversight for water and sewer construction projects within the City of Chesapeake Department of Public Utilities. The selected provider will work with prime contractors to ensure all work complies with the City Public Facilities Manual and the Hampton Roads Regional Construction Standards. Key deliverables include the submission of daily inspection reports and comprehensive close-out documentation. Qualified candidates must hold a Certified Construction Inspector certification or an equivalent credential. This opportunity falls under NAICS code 541330 and was posted on November 6, 2026, with a response deadline of January 6, 2027.

POSTED

DEADLINE

Civil Site & Infrastructure Designer (Water/Sewer/Storm)This subcontract opportunity is for a Civil Site and Infrastructure Designer to support prime contractors on projects for the City of Chesapeake Department of Public Utilities in Virginia. The selected professional will be responsible for designing water mains, sanitary sewer mains, and related civil infrastructure, as well as developing roadway, stormwater, and drainage plans. All work must be completed using AutoCAD/Civil 3D and adhere strictly to the City Public Facilities Manual and Hampton Roads Regional Construction Standards. The role requires a Professional Engineer license to deliver final construction plans and permit applications. Interested parties should note that the response deadline is January 6, 2027. This procurement falls under NAICS code 541330, focusing on engineering services for public utility infrastructure.

POSTED

DEADLINE

Water Storage & Treatment Facility DesignerThis subcontract opportunity is for a Water Storage and Treatment Facility Designer to provide specialized engineering design services for the City of Chesapeake Department of Public Utilities. The selected contractor will support prime contractors by delivering detailed design plans and specifications for ground and elevated water storage tanks, as well as performing modifications and troubleshooting for treatment plant operations. Qualified candidates must hold a Professional Engineer license in Structural, Civil, or Environmental engineering. This procurement falls under NAICS code 541330 and is managed by the Virginia Public Utilities agency, with a response deadline set for January 6, 2027.

POSTED

DEADLINE

Pump Station & SCADA Design EngineerThis subcontract opportunity is for a Pump Station and SCADA Design Engineer to support prime contractors on projects for the City of Chesapeake Department of Public Utilities in Virginia. The selected professional will be responsible for designing mechanical, electrical, and control systems, with a specific focus on developing instrumentation, SCADA systems, and construction plans for pump station upgrades. All work must adhere to the Hampton Roads Regional Construction Standards, and the final deliverables include signed and sealed construction plans and SCADA design documents. Qualified candidates must hold a Professional Engineer license in either Electrical or Mechanical engineering. The solicitation was posted on November 6, 2026, and the deadline for responses is January 6, 2027. This procurement falls under NAICS code 541330 for engineering services.

POSTED

DEADLINE

Water & Wastewater Hydraulic Modeling SpecialistThis subcontract opportunity is for a Water and Wastewater Hydraulic Modeling Specialist to support prime contractors on projects for the City of Chesapeake Department of Public Utilities in Virginia. The selected specialist will be responsible for developing time-dynamic models using City-approved software to analyze the performance of water distribution and sanitary sewer pumping systems. The final deliverables for these assignments consist of detailed hydraulic and water quality modeling reports. Qualified candidates must hold a Professional Engineering license and strictly adhere to all City policies. This procurement falls under NAICS code 541330. The solicitation was posted on November 6, 2026, and the deadline for responses is January 6, 2027.

Public Utilities

POSTED

about 4 hours ago

DEADLINE

in 2 months

AI Contract Overview

The University of Texas at Arlington is seeking a subcontractor for Landscape Architecture Design Services to develop comprehensive plans for the library mall environment. The scope of work includes the creation of detailed planting layouts, hardscape designs, and irrigation systems, with a primary focus on ensuring seamless aesthetic integration within the existing campus surroundings. Interested parties must submit their responses by the deadline of January 6, 2026. This opportunity is categorized under NAICS code 541330 and was officially posted on December 5, 2025. Further details regarding the solicitation can be accessed through the Texas SmartBuy portal.

General Info

Agency

University of Texas at Arlington

NAICS

541330 - Engineering Services

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of FM2026-002.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ARCHITECT/ENGINEER SERVICES FOR LIBRARY MALL LANDSCAPE PROJECT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedDec 5

subcontract

Response DeadlineJan 6

Deadline has passed

Submission Closed

01/06/2026, 02:00:00 PM CST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyUniversity of Texas at Arlington

ContactsNo contacts available

OfficeN/A

Organization / Agency

University of Texas at Arlington

Office AddressN/A

ContactsNo contact information available

Full Description

Development of landscape design plans including planting layouts, hardscapes, irrigation, and aesthetic integration with the library mall environment.