Laser Tracker

The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 334515 Optical instrument and lens. This requirement will be set aside as a 100% Small Business concern. This is a brand name specific solicitation with the only acceptable items as listed below. Substitutes will not be accepted. The Contract Line Items (CLINs) are as follows. 0001 1 Kit N4215811541577 FFP PROBE KIT. - SYSTEM: Faro Vantage E6 with Dynamic 6 Degrees of Freedom iADM IP52 rated laser tracker that can support minimum of 35m range. Must include all power and connectivity cables, precision level, weather station, air temp sensor, mandrel, utility software and case. Not allowed to have WIFI capabilities. - Cables: Must be A/C power, IP52 rated and min. 2.5 m in length. Suitable for power supplies with quick disconnect cables and Vantage E/S/E6/S6 trackers. - 6 Probe Kit: Kinematic 6 degrees of freedom probe with kinematic mount. Kit shall include handle, strap, 1 Kinematic Adapter, 1 40mm long stylus, 2 batteries, charger, calibration nest and case. - 6 Probe Tooling Kit: Kit shall include at minimum2 kinematic adapters, 1 50mm extension, 1 200mm extension, 2 100mm extensions, 1 angled extension, 1 3mm tip 20mm stylus, 1 6mm tip 40mm stylus, 1 6mm tip 50mm stylus, 1 50mm scribe stylus, 1 6mm reset sphere, and 1 scribe compensation tool. - Battery's: At minimum must contatin a Single Battery charger for Vantage S/E batteries. Standard battery module kit for Vantage E/E6 and S/S6 trackers. Kit includes the module, single battery charger, battery mounting hardware, and a DC power cable. Also, must contain 2 high capacity class 9 batteries that have over 200 Wh of power. 2 cases shall be provided for batteries. - Calibration: Tracker must meet ASME B89.4.19 Certification and be NIST recognized laser tracker certification procedure covering all requirements, and is ISO 17025 Accredited. NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent. FOB: Destination MILSTRIP: N4215811541577 PURCHASE REQUEST NUMBER: N4215811541577 PROJECT: YY9 PSC CD: 9999 This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM121Q0091 and it is expected to be posted on or about 30 August 2021 and posted in SAM, https://.sam.gov/. Quotes will be due by 6:00 am EST on 7 September, 2021 and may be emailed to the attention of Craig Harmon at contact@example.gov. Please make sure that the solicitation number (SPMYM121Q0091) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://.sam.gov/ By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.