Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LATCH, DOOR, VEHICULA

Active
SPE7L4-26-T-6552Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of two vehicular door latches, identified by NSN 254001733051 and part number 218-0070 from McClarin Plastics, LLC. The agreement specifies a delivery timeframe of five days after order and designates the point of inspection and acceptance at the destination. Shipping is set as FOB Origin, with the final delivery destination located at Fort Wainwright, Alaska. The contract mandates strict adherence to environmental and quality standards, specifically prohibiting the use of Class I ozone depleting chemicals. Technical and quality requirements are governed by the DLA Master List, with specific packaging and marking standards following MIL-STD-2073-1E and MIL-STD-129. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance.

General Info

McClarin Plastics will supply two door latches to Fort Wainwright within five days.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

3030 MONTGOMERY ROAD AWCF SSF, FORT WAINWRIGHT, AK, 99703-7000, USA

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-6552.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUSA
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LATCH,DOOR,VEHICULA
LATCH,DOOR,VEHICULAR
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MCCLARIN PLASTICS, LLC 126G2 P/N 218-0070
SPE7L4-26-T-6552
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018038256 0001 EA 2.000
NSN/MATERIAL:2540017333051
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WC1JU4
0025 CS BN CO A DISTRIBUTI
SUP DIV DOL BLDG 3030
3030 MONTGOMERY ROAD AWCF SSF
FORT WAINWRIGHT AK 99703-7000
US
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WC1JU4
0025 CS BN CO A DISTRIBUTI
SUP DIV DOL BLDG 3030
3030 MONTGOMERY ROAD AWCF SSF
FORT WAINWRIGHT AK 99703-7000
US
MARKFOR
SPE7L4-26-T-6552
SECTION B
PR: 7018038256 PRLI: 0001 CONT’D
WC1JU4
0025 CS BN CO A DISTRIBUTI
SUP DIV DOL BLDG 3030
3030 MONTGOMERY ROAD AWCF SSF
FORT WAINWRIGHT AK 99703-7000
US
M/F: (TCN) WC1JU462330114
RDD: 999
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/27/2026
SPE7L4-26-T-6552 NSN/Part Number: 2540-01-733-3051 Quantity: 2 EA Purchase Request: 7018038256QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336360
New
DIBBS
ARM, WINDSHIELD WIPE
Solicitation # SPE7L4-26-T-6307
This contract is a solicitation issued by the Department of Defense for the procurement of five windshield wipe arms, identified by NSN 2540016875619 and part number 401/J5527. The order is managed under purchase request 7017869061 with a required delivery date of March 26, 2027. Delivery is set for 213 days after the order is placed, with the shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. It explicitly prohibits the use of Class I ozone-depleting chemicals. All items must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania, with packaging and labeling following MIL-STD-129 and ASTM D3951 standards unless hazardous material protocols under IP025 are required.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336360
New
DIBBS
CUSHION, SEAT BACK, VEHI
Solicitation # SPE7LX-26-U-9376
This solicitation, issued by the DLA Land and Maritime Strategic Acquisition Directorate under number SPE7LX-26-U-9376, is a Request for Quotations for a one-year Indefinite Delivery Contract (IDC) to provide vehicular seat back cushions (NSN 2540-00-735-3551). The contract is designated as a Small Business Set-Aside with an estimated annual quantity of 71 units and a guaranteed minimum of 10 units. The maximum contract value is capped at $350,000, and individual delivery orders must meet a minimum of 17 units. Quotations are due by August 25, 2026, via the DIBBS portal, and the government intends to award the contract to the responsible offeror whose quote is most advantageous based on price and other evaluated factors. Technical and quality requirements are strictly governed by the DLA Master List, including specific configuration change management and the removal of government identification from non-accepted supplies. The cushions must be manufactured in accordance with various reference drawings, such as 19207 7353551. Compliance with environmental and safety standards is mandatory, specifically the prohibition of Class I ozone-depleting chemicals and adherence to hazardous material packaging requirements under FED-STD-313 or TQ requirement IP025. Packaging and labeling must follow MIL-STD-129 and ASTM D3951, while palletization must comply with RP001. Delivery is required within 104 days after order placement, FOB Origin, with inspection and acceptance occurring at the destination. Additionally, contractors must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and adhere to cybersecurity standards regarding the safeguarding of covered defense information.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336360
New
DIBBS
CLAMP, STOWAGE, VEHIC
Solicitation # SPE7L5-26-T-4939
This contract, identified as SPE7L5-26-T-4939, is a solicitation from the Department of Defense Land Supplier Operations Engines for the procurement of vehicular stowage clamps, specifically part number 3370017 from Oshkosh Defense LLC. The requirement consists of two line items under purchase request 7017133686, totaling five units of NSN 2540015124845. Delivery is required within 105 days, with a required delivery date of November 12, 2026, and a need ship date of December 8, 2026. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination. Shipping locations include DLA Distribution Albany in Georgia and DLA Distribution San Joaquin in California. Packaging must adhere to DLA packaging requirements RP001 and MIL-STD-129, with specific instructions to follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract mandates that all DLA Master List technical and quality requirements take precedence over commercial packaging standards.
LAND SUPPLIER OPNS ENGINES

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336360
New
DIBBS
COVER, FITTED, VEHICU
Solicitation # SPE7L5-26-T-5186
This contract, identified as SPE7L5-26-T-5186, is a solicitation from the Department of Defense Land Supplier Operations Engines for the procurement of 43 fitted vehicle covers. The items are identified by NSN 2540-01-513-6603 and Oshkosh Defense LLC part number 3367227. The delivery is required within 62 days, with a need ship date of November 10, 2026, and a final required delivery date of November 12, 2026. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging standards based on ASTM D3951 for non-hazardous materials. Inspection and acceptance will take place at the destination, and the contract incorporates technical and quality requirements as specified in the DLA Master List.
LAND SUPPLIER OPNS ENGINES

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336360
New
DIBBS
CYLINDER, LOCK, VEHIC
Solicitation # SPE7L4-26-T-6254
This contract is for the procurement of one vehicle lock cylinder, identified by NSN 2540017286524 and Southco Inc part number J-CM-99-286. The solicitation, numbered SPE7L4-26-T-6254, is issued by the Department of Defense under the agency LSO Combat Vehicles and Armament. The required delivery date is August 10, 2026, with a delivery timeframe of 20 days after order. The items must be shipped FOB Origin to Fort Huachuca, Arizona, using traceable shipping methods rather than parcel post. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards RP001, marking standards MIL-STD-129, and the removal of government identification from non-accepted supplies per RQ011. Inspection and acceptance will take place at the destination.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336360
New
DIBBS
CLAMP, STOWAGE, VEHIC
Solicitation # SPE7L1-26-U-0634
This contract is a solicitation issued by the Department of Defense Land Supply Chain for the procurement of vehicle stowage clamps, specifically part number TM-700 from Hi-Lift Jack Co. The requirement consists of an estimated quantity of 94 units under NSN 2540016848977. The delivery timeframe is set at 80 days after the order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The procurement is designated as a total small business set-aside under NAICS code 336360. Compliance with several technical and quality standards is mandatory, including DLA packaging requirements, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging data. Specific quality requirements include the removal of government identification from non-accepted supplies and strict adherence to physical identification and bare item marking protocols.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
BASE PLATE, BODY
Solicitation # SPE7L5-26-T-4935
This contract, identified as solicitation SPE7L5-26-T-4935, is for the procurement of 70 units of a body base plate, identified by NSN 2540016964728 and Fairbanks Morse part number 26018000017. The order is managed by the Department of Defense Land Supplier Operations Engines, with a required delivery date of February 26, 2027, and a delivery window of 188 days. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination. Shipping and palletization must adhere to DLA packaging requirements and MIL-STD-129 marking standards. The items are to be delivered to the DLA Distribution San Joaquin facility in Tracy, California. Technical and quality requirements are governed by the DLA Master List, specifically including guidelines for the removal of government identification from non-accepted supplies and physical item marking.
LAND SUPPLIER OPNS ENGINES

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336360
New
DIBBS
CUSHION, SEAT BACK, V
Solicitation # SPE7L4-26-T-6239
This contract is for the procurement of four kits of seat back cushions, identified by NSN 2540-01-595-7318 and part number 115-213370-001 from Shockride, LLC. The order is managed under solicitation number SPE7L4-26-T-6239 for the Department of Defense, specifically the LSO Combat Vehicles and Armament. Delivery is required within five days after the order, with a final required delivery date of August 10, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Shipping must be handled via the fastest traceable means to the Distribution Management Office in Albany, Georgia, and must comply with MIL-STD-129 for marking and labeling. Inspection and acceptance will take place at the destination, with a zero percent quantity variance allowed.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336360
New
DIBBS
CUSHION, SEAT, VEHICULAR
Solicitation # SPE7L4-26-U-1158
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
COVER, FITTED, VEHICU
Solicitation # SPE7LX-26-U-9795
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7LX-26-U-9794
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
25--SEAT,VEHICULAR
Solicitation # SPE7LX-26-U-9765
This federal solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of four vehicular seats identified by part number 2540-01-698-1235. The request is tracked under purchase request 1000238711 and is listed under solicitation number SPE7LX-26-U-9765. The opportunity was posted on August 25, 2026, with a response deadline set for September 9, 2026. Interested parties can find further details and submit responses through the DIBBS portal.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 333613
New
DIBBS
HUB, BODY
Solicitation # SPE7L4-26-U-1082
Solicitation SPE7L4-26-U-1082 is a unilateral Simplified Indefinite-Delivery Contract (SIDC) issued by the Department of Defense, LSO Combat Vehicles and Armament, for the procurement of HUB, BODY components (NSN 3040010868869). This SDVOSB set-aside contract has a maximum value of 350,000.00 USD and a guaranteed minimum quantity of 7 units, with an estimated annual requirement of 51 units. The delivery schedule is 127 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. The contract mandates strict adherence to technical and quality standards, specifically requiring that DLA Packaging Requirements (RP001) take precedence over ASTM D3951, with all labeling conforming to MIL-STD-129. Critical regulatory requirements include a CMMC Level 2 self-assessment for cybersecurity, the safeguarding of covered defense information per DFARS 252.204-7012, and a total prohibition on the use of Class I ozone-depleting chemicals. Additionally, the contractor must comply with U.S.-flag vessel requirements for ocean transportation and provide representations regarding the prohibition of covered telecommunications equipment.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SEAL, NONMETALLIC ST
Solicitation # SPE7L4-26-U-1062
The solicitation seeks procurement of 61 nonmetallic seals under NSN 5330015769565, with a guaranteed minimum order of nine units, and is structured as a Small Business Set Aside under NAICS code 332722. The contract, if awarded, will be an Indefinite Delivery Contract valid for one year or until aggregate orders reach $350,000, with an estimated one order per year. Items will be delivered to multiple DLA depots across CONUS and OCONUS via consolidated containerization points. Only the approved source, 64678 17-18248-001, is eligible, and quotes must be submitted electronically by the deadline of August 21, 2026. No hard copies or technical specifications are provided, and all responsible small business sources may respond if submissions are received on time. The solicitation is issued by the Department of Defense through DLA Land and Maritime, with the contracting office located in Columbus, Ohio, and all inquiries must be directed via email to the designated buyer.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
SPACER, PLATE
Solicitation # SPE7L4-26-T-6165
This contract is for the procurement of 79 units of a plate spacer, identified by NSN 5365015519702 and part number 13007321. The item must be acquired from the prime contractor, BAE Systems Land and Armaments Limited Partnership. Delivery is required within 168 days, with a required delivery date of February 26, 2027, shipping FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires compliance with CMMC Level 2 self-assessment and covered defense information protocols. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with inspection and acceptance occurring at the destination. All technical and quality requirements are further detailed in the DLA Master List.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE7L4-26-T-6308
This contract, identified as SPE7L4-26-T-6308, is for the procurement of 163 socket head cap screws under NSN 5305-01-696-9489. The order is issued by the Department of Defense through the LSO Combat Vehicles and Armament agency, with a required delivery date of March 13, 2027, and a delivery window of 200 days. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance will be managed via destination inspection and acceptance, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals in the production of the supplied items.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
RETRACTOR, SAFETY BELT,
Solicitation # SPE7L4-26-T-6291
This contract is for the procurement of 61 vehicle safety belt retractors, identified by NSN 2540016119811 and part number 334/E8048 from JCB Inc. The agreement specifies a delivery timeframe of 188 days after receipt of order, with an original required delivery date of August 12, 2026, and a need ship date of March 1, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging must comply with DLA requirements and MIL-STD-129, utilizing ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract is managed by the Department of Defense under the LSO Combat Vehicles and Armament agency.
Other Motor Vehicle Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L4-26-U-1067
The procurement is for 29 mounting brackets identified by NSN 5340015767743 under a Small Business Set Aside, with the solicitation number SPE7L426U1067 and NAICS code 332722. The contract, if awarded, may be structured as an Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first, with a guaranteed minimum of four units. Delivery is required within 16 days of order placement to various DLA depots across CONUS and OCONUS, utilizing consolidation and containerization points. Only the approved source code 64678 A17-18272-000 is authorized, and all quotes must be submitted electronically through the SAM.gov portal; hard copies are not available. The solicitation is an RFQ with no supporting specifications, plans, or drawings provided, and responsible small business concerns are invited to respond. The response deadline is August 21, 2026, with the solicitation posted on August 6, 2026. Inquiries must be directed via email to the designated point of contact, and all submissions must be received by the stated deadline to be considered.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
CAPASSEMBLY
Solicitation # SPE7L4-26-U-1075
This solicitation, numbered SPE7L4-26-U-1075, is a Request for Quotations issued by DLA Land and Maritime for an Indefinite Delivery Contract (IDC) regarding CAPASSEMBLY for NSN 2910-01-485-7711. The contract is a Total Small Business Set-Aside under NAICS code 336310, with a contract maximum value of $350,000. While the estimated annual quantity is 149 units, the contract includes a guaranteed minimum of 22 units and a minimum delivery order quantity of 37 units. Quotations must be submitted electronically via the DLA-BSM Internet Bid Board System (DIBBS) no later than August 24, 2026. The scope of work requires strict adherence to technical and quality standards, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. Packaging, marking, and labeling must comply with MIL-STD-129, including specific barcoding requirements such as 2D Data Matrix barcodes. For hazardous materials, contractors must comply with 29 CFR 1910.1200 and submit Safety Data Sheets (SDS) and hazard warning labels prior to award. Delivery is scheduled for 74 days after the date of order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract also incorporates significant cybersecurity and data safeguarding obligations under DFARS, requiring the protection of covered defense information and mandatory reporting of cyber incidents.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE7L4-26-U-1083
Solicitation SPE7L4-26-U-1083 is a total small business set-aside for the procurement of flat washers (NSN 5310-01-478-8671) for the LSO Combat Vehicles and Armament under the Department of Defense. This is a unilateral Simplified Indefinite-Delivery Contract with a guaranteed minimum of 11 units and an estimated quantity of 115 units, carrying a maximum contract ceiling of 350,000 dollars. Delivery is required within 29 days after the date of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and ASTM D3951, and requires physical item identification per MIL-STD-130N. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with various FAR and DFARS clauses regarding small business representations, hazardous material identification, and NIST SP 800-171 assessment requirements. Proposals must be submitted electronically via the DIBBS portal by August 25, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334514
New
DIBBS
INDICATOR, LIQUID QUANT
Solicitation # SPE7L4-26-T-6554
This contract is for the procurement of one liquid quantity indicator, identified by NSN 6680-01-661-9652 and associated with Cummins Inc. part numbers 5677770 and 6494342. The order is issued under solicitation number SPE7L4-26-T-6554 by the Department of Defense, specifically the LSO Combat Vehicles and Armament. Delivery is required within 20 days, with an original required delivery date of August 27, 2026. The shipment must be delivered FOB Origin to the 0115 CS BN CO A Distribution center at Fort Hood, Texas. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. The contract mandates the use of traceable shipping means and prohibits the use of parcel post. Technical and quality requirements are governed by the DLA Master List, including the removal of government identification from non-accepted supplies.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-U-1072
This solicitation, number SPE7L4-26-U-1072, is a Request for Quotations issued by the DLA Land and Maritime for an Indefinite Delivery Contract (IDC) regarding Angle Brackets (NSN 5340-01-481-8190). The contract is a Total Small Business Set-Aside with an estimated maximum value of $350,000. The requirement involves an estimated annual quantity of 129 units, though the specific quantity per order may vary. Deliveries are required within 116 days after the date of order, with terms set as FOB Origin and inspection and acceptance occurring at the destination within the continental United States. Technical and quality compliance is strictly governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over standard commercial packaging. Specifically, non-hazardous materials must be packaged in accordance with ASTM D3951, while hazardous materials must follow TQ requirement IP025 and FED-STD-313. All packaging, marking, and labeling must adhere to MIL-STD-129, including bar-coding requirements. Offerors must submit quotations electronically via the Wide Area WorkFlow (WAWF) system no later than August 24, 2026. The contract incorporates various FAR and DFARS clauses covering equal opportunity, combating trafficking in persons, sustainable products, and cybersecurity requirements such as NIST SP 800-171.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
RUBBER STRIP
Solicitation # SPE7L4-26-T-6555
This contract is for the procurement of rubber strips under solicitation SPE7L4-26-T-6555 for the Department of Defense. The requirement consists of two line items for NSN 5330219062180, totaling 119 units, with deliveries split between DLA Distribution Albany and DLA Distribution San Joaquin. The items are designated as critical application components with a non-extendable shelf life of 36 months and must be free of asbestos. Delivery is required within 62 days, with a required delivery date of December 15, 2026. Strict packaging standards apply, requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, and all shipping and marking must comply with MIL-STD-129 and RP001 requirements.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details