Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

LAUNCHER CONTROL

Active

N0010426QQC57Federal

Response Deadline09/23/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the Navsup Weapon Systems Support Mech office located in Mechanicsburg, Pennsylvania, has issued a solicitation for Launcher Control under solicitation number N0010426QQC57. This opportunity falls under NAICS code 336415 and is open to all qualified bidders as there is no specific set-aside designated for this requirement. The solicitation was posted on September 8, 2026, and requires responses to be submitted by the deadline of September 23, 2026, at 9:00 PM. Interested parties can coordinate with the primary point of contact, Genevieve E. Miller, to obtain further details regarding the submission process and technical requirements.

General Info

DoD solicitation N0010426QQC57 for Launcher Control; responses due September 23, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(1)

N0014-26-Q-QC57 RFQ for repair of launcher control shelf

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedSep 8

Solicitation

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 09:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

SEE ATTACHED SOLICITATION.

Similar Contracts

Same NAICS industry code

RING, CRANK PIN

Solicitation # SPE7M0-26-T-075L

This contract is for the procurement of one crank pin ring, identified by NSN 2010012250170 and part number 106042025 from Bird-Johnson Propeller Company, LLC. The item is designated as a critical application item and must meet specific technical requirements, including a magnetic permeability of 2.0 or less and strict prohibitions against the intentional addition of mercury or mercury-containing compounds. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-075L as a total small business set-aside. Delivery is required within five days of order, with the final destination being the US Naval Base Sasebo in Japan. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory, alongside CMMC Level 2 self-assessment for cybersecurity.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

14--HOUSING,SPROCKET BR

Solicitation # SPE4A726T717Z

DLA Aviation is soliciting quotes for the procurement of eight sprocket brake housings under NSN 1450015875599. The approved source for this item is 97384 33307-40052-1. Delivery is required to DLA Distribution W1A8 within 116 days after the order is placed. This request for quote is being managed by the Department of Defense in Richmond, Virginia, under NAICS code 336415. All interested and responsible sources must submit their quotes electronically by the deadline of September 15, 2026. No hard copies of the solicitation or technical drawings are available.

POSTED

DEADLINE

14--ROCKER ARM,ACTUATIN

Solicitation # SPE4A626T27CA

DLA Aviation is soliciting quotes for the procurement of actuating rocker arms under solicitation number SPE4A626T27CA. The requirement consists of two line items: 36 units to be delivered within 494 days after receipt of order and one unit to be delivered within 180 days after receipt of order, both destined for the DLA Distribution Depot Hill. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 336415. Interested and responsible sources must submit their quotes electronically by the deadline of September 15, 2026. The procurement is managed by the Department of Defense through the DLA Aviation office located in Richmond, Virginia. All inquiries and submissions should be directed through the specified electronic channels or the DIBBS portal.

POSTED

DEADLINE

Supply of Retractable Rail Trigger (NSN 1440002266067)This subcontract involves the manufacture or sourcing of one Retractable Rail Trigger, identified by NSN 1440002266067, for prime contractors working on ASC Commodities Division projects under the Department of Defense. The supplier is responsible for ensuring the part meets DLA Master List technical specifications, performing physical identification, and completing bare item marking. The final deliverable consists of one packaged and marked trigger. The contract mandates strict adherence to several regulatory and technical standards, including MIL-STD-2073-1E, RP001, and MIL-STD-129. Additionally, the provider must comply with ITAR/EAR regulations and cybersecurity requirements outlined in DFARS 252.204-7012 and NIST SP 800-171. The opportunity falls under NAICS code 336415, with a response deadline of September 10, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26DV

This solicitation, identified as SPE4A6-26-T-26DV and issued by the Department of Defense ASC Commodities Division, is for the procurement of one retractable rail trigger, part number 1440-00-226-6067. The requirement falls under NAICS code 336415 and specifies a delivery timeline of 20 days after receipt of order. Quotes must be submitted via DIBBS by September 10, 2026. The contract is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging standards and inspection and acceptance at origin. It contains covered defense information and is subject to export controls under ITAR or EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization. While physical identification and bare item marking are required, item unique identification is not necessary for this specific request.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Arresting Guide Lugs

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 8 hours

ROD SECTION, VALVE

Solicitation # SPE7M4-26-T-378B

Solicitation SPE7M4-26-T-378B, issued by the DLA Land and Maritime Fluid Handling Division, is a small business set-aside for the procurement of four rod section valves under NSN 2010013188596. The requirement specifies critical application items associated with Bird-Johnson Propeller Company part numbers 115636106, 115636106-NO.1, and 11565082 Find 1. Delivery is required within seven days after receipt of order, with shipping terms set as FOB Origin and the destination for inspection and acceptance located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Technical and quality compliance is governed by the DLA Master List (RA001), and the contractor must comply with CMMC Level 2 self-assessment and covered defense information requirements. Additionally, the procurement prohibits the intentional addition of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment, and compliance with the Buy American Act and Berry Amendment regarding domestic material sourcing.

FLUID HANDLING DIVISION

POSTED

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A6-26-T-25PB

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-25PB, is for the procurement of four arresting lugs for guided missile launchers, identified by NSN/Part Number 0001S00000052. The contract falls under NAICS code 336415 and requires delivery within 552 days after the order is placed. Performance is centered in Tracy, California, and the procurement process includes first article approval and testing requirements, with government testing costs serving as an evaluation factor. The contract is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards and inspection and acceptance at origin. Due to the nature of the equipment, the item is subject to export controls under ITAR or EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Item Unique Identification is not required for this specific request.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 8 hours

14--LAUNCHING SHOE,GUID

Solicitation # SPE4A626T25TF

DLA Aviation is seeking quotes for the procurement of 20 units of Launching Shoe, GUID (NSN 1440011083349) under solicitation number SPE4A626T25TF. This is a total small business set-aside opportunity under NAICS code 336415. The items are to be delivered to DLA Distribution Jacksonville within 123 days after the order is received. Approved sources for this requirement include 27361 BP13742, 32067 14-82042-9, and 8X044 14-82042-9. All interested and responsible sources may submit electronic quotes by the deadline of September 9, 2026. The solicitation is available exclusively online, and no hard copies or separate technical drawings are provided.

POSTED

DEADLINE

in about 3 hours

14--SABOT,SUBASSEMBLY

Solicitation # SPE4A726T711G

DLA Aviation is soliciting quotes for the procurement of 6,323 units of Sabot Subassemblies under solicitation number SPE4A726T711G. This requirement is designated as a total Small Business Set Aside and falls under NAICS code 336415. The items are to be delivered to DLA Distribution within 460 days after the order is placed. All interested and responsible sources must submit their quotes electronically by the deadline of September 9, 2026. The solicitation is available exclusively online, and any necessary digitized drawings or military specifications must be retrieved electronically. Inquiries regarding this procurement should be directed to the buyer via the DIBBS portal.

POSTED

DEADLINE

in about 3 hours

Supply of Critical Application Crank Pin Ring (P/N 106042025)

FLUID HANDLING DIVISION

POSTED

DEADLINE

PISTON, RESONANCE CH

Solicitation # SPE7M4-26-T-376N

This contract solicitation, identified as SPE7M4-26-T-376N, is issued by the Department of Defense Fluid Handling Division for the procurement of eight units of Resonance Channel Pistons, identified by NSN 2010-01-029-9345 and Kingsbury Inc. part number 65-5691-126. This is a critical application item with a required delivery date of December 23, 2027, and a delivery window of 143 days after order. The contract specifies FOB Origin shipping with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The procurement is subject to strict technical and quality standards, including DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Environmental restrictions are explicitly stated, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. All packaging and palletization must adhere to MIL-STD-2073-1E and the DLA Master List of Technical and Quality Requirements. Quotes for this solicitation were due by September 11, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Chemical and Mechanical Analysis Laboratory Services

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

NDT Inspection for Valve Stem Production

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Precision Manufacture of Fluid Valve Stems (CSI)

POSTED

about 21 hours ago

DEADLINE

61--CAPSTAN VAR SP CTRL

Solicitation # N0010426QYAGT

Solicitation NO0104-26-Q-YAGT is a request for quotations issued by NAVSUP Weapon Systems Support Mech for the manufacture and procurement of one Capstan Var SP Ctrl, identified by NSN 6110-01-620-7112. The requirement is for a commercial supply that must adhere to specific design and performance standards outlined in drawing 53711 324-7067914-038 and various other technical drawings. The government has included an option to increase the quantity by up to 100 percent for 365 days after receipt of the award at the same unit price. Delivery is required within 180 days and is specified as FOB Destination. The contract mandates strict quality assurance and safety standards, including a requirement for the supplier to maintain an ISO 9001 quality system and a strict prohibition against metallic mercury contamination. Government source inspection is required, and acceptance will take place at the origin. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization from the OEM. Award will be based on the most advantageous offer, considering price and risk factors evaluated through the Supplier Performance Risk System. All invoicing and payment processing must be conducted via the Wide Area WorkFlow system.

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

STEM,FLUID VALVE

Solicitation # N0010426QND36

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the manufacture and supply of fluid valve stems under NSN 1H9510-01-495-9543X2. The material is designated as Special Emphasis material due to its use in crucial shipboard systems, where failure could result in serious personnel injury or loss of the vessel. The contract is DX certified for national defense under the Defense Priorities and Allocations System and is being processed using Emergency Acquisition Flexibilities. The award will be bilateral, requiring written acceptance from the contractor. Technical requirements specify that stems must adhere to NAVSEA drawing 803-5959296 and associated engineering reports. Key mandates include the use of EB Specification 4581 material with full heat traceability, specific non-destructive testing such as dye penetrant inspection, and strict adherence to FED-STD-H28 for thread inspection. The contractor must provide a comprehensive certificate of compliance and objective quality evidence, including chemical and mechanical analysis. All certification data must be submitted via Wide Area Workflow to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. The solicitation was posted on September 8, 2026, with an extended response deadline of October 8, 2026.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

Fair Opportunity to Quote - 26107-0010

Solicitation # 26107-0010

Solicitation 26107-0010 is a Fair Opportunity to Quote issued by the Navsup Weapon Systems Support Mech under the Department of Defense for the repair of NIINs LLH866206, 013404708, and 015448610. The project falls under NAICS code 332911 and is managed by Madison Gray at the Mechanicsburg, Pennsylvania office. Technical data packages and drawings are available upon request via the SAM.gov special notice page. All submitted offers must remain valid for 45 days, and units will be handled as F.O.B. Origin. The resulting order will be subject to all terms and conditions of the base contract. The deadline for responses is September 18, 2026, and there is no specific set-aside designated for this opportunity.

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

CABLE ASSEMBLY,SPEC

Solicitation # N0010426QQC58

The Department of Defense, through the Navsup Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania, has issued solicitation N0010426QQC58 for the procurement of specific cable assemblies. This requirement falls under NAICS code 335999 and is open to all qualified bidders as there is no set-aside designation for this opportunity. The solicitation was posted on September 8, 2026, and requires all responses to be submitted by the deadline of October 5, 2026, at 9:00 PM. Interested parties should refer to the attached solicitation documents for full technical specifications and coordinate with the primary point of contact for further inquiries.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

43--ELEMENT AND SHELL

Solicitation # N0010426QBY03

This solicitation, issued by the Department of Defense via Navsup Weapon Systems Support Mech, is for the procurement of elements and shells under solicitation number N0010426QBY03. The contract is a fixed-price agreement with FOB-destination terms, requiring strict adherence to technical documentation, including the Individual Repair Part Ordering Data (IRPOD) and specific military specifications. Notably, certain technical documents are classified as Confidential National Security Information, requiring the seller to be cleared and to provide a DD-254. Key requirements include a mandatory review of the IRPOD, a prohibition on the intentional use of mercury, and specific packaging standards such as MIL-PRF-23199 for cleanliness control. The contractor must maintain an acceptable inspection system and submit comprehensive Vendor Certified Reports of Test and Inspection and cure date certificates upon delivery. Pricing for quotations is generally valid for 60 days, and the procurement process utilizes the Wide Area Workflow for payments and the Workflow Pro Mod Assist module.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

53--PLUG,MACHINE THREAD

Solicitation # N0010426QYAG7

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks the manufacture of machine thread plugs. The contract requires strict adherence to quality standards, including ISO 9001 or MIL-I-45208, and mandates that all items be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Physical identification must comply with MIL-STD-129, and the government reserves the right to perform inspections to ensure all supplies meet prescribed requirements. Key administrative details include a requirement for government source approval prior to award and a preference for authorized distributors of the original manufacturer. The contract includes an option for increased quantity available 365 days after the award, and evaluation will be based on the lowest aggregate total price. All proposals must be submitted by October 5, 2026, and must include the necessary source approval documentation to be considered.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

DEADLINE

Solicitation # N0010426QEG31

This solicitation, issued by the Navsup Weapon Systems Support Mech for the procurement of a wiring harness (part number JKV314-16), is a fixed-price contract requiring strict adherence to technical specifications and quality standards. Vendors are mandated to review the Individual Repair Part Ordering Data (IRPOD) via the BPMI site and must comply with specific military standards for inspection, packaging, and the exclusion of mercury. Pricing for quotations is generally valid for 60 days after the closing date. The contract emphasizes a strict order of precedence for document resolution, prioritizing amendments and the schedule of supplies over technical drawings and specifications. Key requirements include the submission of Vendor Certified Reports of Test and Inspection per DI-QCIC-8872 and adherence to specific packaging labels. The procurement also incorporates various federal mandates, including the Buy American Act, cybersecurity maturity model certification, and equal opportunity requirements for veterans and workers with disabilities.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

66--MSA CARTRIDGE

Solicitation # N0010426QEE98

This solicitation is for the procurement of MSA Cartridges, specifically part number 074535, manufactured by Thermo Electron North America LLC. The items must be delivered as Eluent Generator EGC-III MSA Cartridges and must adhere to MIL-STD-129 marking and labeling requirements. A critical requirement is that the supplies must have at least 85% of their 24-month shelf life remaining at the time of shipment. The contract is a fixed-price agreement with FOB-destination shipping. The seller is required to provide Safety Data Sheets and GHS compliant labels for any hazardous materials prior to the award. Key deliverables include a Certificate of Compliance and a cure date certificate to be submitted at the time of material delivery. Pricing for quotations remains valid for 60 days after the closing date, and the procurement is subject to various federal regulations, including small business set-aside and cybersecurity maturity model certification requirements.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

Solicitation # N0010426QEG32

This solicitation, issued by the Navsup Weapon Systems Support Mech for the Department of Defense, seeks the manufacture and design of a Network Stub, identified by part number 07030421-1. The procurement specifies that the item must be designed and manufactured in accordance with the standards of DRS Training and Control Systems, LLC. Key technical requirements include a strict prohibition on the intentional addition of mercury or mercury-containing compounds and adherence to specific packaging and cleanliness standards, such as MIL-PRF-23199 and MIL-STD-2073. The contract is a fixed-price agreement requiring the contractor to maintain an acceptable inspection system and provide a Certificate of Compliance upon delivery. Pricing for quotations remains valid for 60 days following the closing date. The solicitation also incorporates various federal mandates, including the Buy American-Balance of Payments Program, cybersecurity maturity model certification, and equal opportunity requirements for veterans and workers with disabilities. All deliverables and technical data must comply with specific Navy distribution statements and the order of precedence established in the procurement documentation.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS