Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Lavatory Unit Fabrication and Supply

Active

Federal

Response Deadline09/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and supply of a complete Lavatory Unit for prime contractors supporting DLA Troop Support Construction and Equipment contracts. The unit must be manufactured according to TDP Rev A Gen 4 and Basic Drawing NR 80064 1623970 Revision G, with all marking performed in compliance with MIL-STD-129. The provider is responsible for utilizing all necessary tooling and materials to meet these specific technical specifications. The project is managed by the Department of Defense for the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contract requires the delivery of one completed Lavatory Unit within 30 days after receipt of the order.

General Info

Fabricate and supply one Lavatory Unit for DDSP New Cumberland within 30 days.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E8-26-Q-0492.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LAVATORY UNIT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a complete Lavatory Unit for prime contractors delivering DLA Troop Support Construction & Equipment contracts. Fabricates the unit per TDP Rev A Gen 4 and Basic Drawing NR 80064 1623970 Revision G. Performs marking in accordance with MIL-STD-129. Utilizes tooling and materials required to meet the specific TDP specifications. Delivers one completed Lavatory Unit within 30 days ADO.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E8-26-Q-0492

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

COVER, FAUCET HOLE

Solicitation # SPE8E8-26-T-5594

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

Laundry Tray and Faucet Material SupplyThis subcontract, managed by Management & Training Corporation, involves the sourcing and delivery of laundry trays and matching faucet sets for prime contractors working on Job Corps facility projects at the Charleston Job Corps Center. The supplier is responsible for providing laundry trays measuring approximately 25 by 22 inches along with corresponding faucet sets, ensuring all materials are delivered in specified quantities to the project site. The contract requires strict adherence to Buy American-Supplies regulations under FAR 52.225-01 and mandates that manufacturer warranties be provided on company stationery. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and veteran-owned small businesses, under NAICS code 332913.

Management & Training Corporation

POSTED

DEADLINE

URINAL, STATIONARY

Solicitation # SPE86-26-T-5522

Solicitation SPE8E8-26-T-5522 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of eight stationary urinals, identified as critical application items under NSN 4510-00-885-7570. Approved parts include P/N 2835U from Anchor Fabricators Inc, P/N 4392 from Midstar Inc, and P/N 8001 from Mag Aerospace Industries, LLC. The delivery is required within 167 days after receipt of order, with a need ship date of March 1, 2027, and a final required delivery date of March 12, 2027. Shipping is designated as FOB Origin under the First Destination Transportation program, with the delivery destination being DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges to account for demand volatility. The procurement incorporates various federal and defense regulations, including the Buy American Act, Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area Workflow system.

POSTED

DEADLINE

URINAL, STATIONARY

Solicitation # SPE8E8-26-T-5410

DLA Troop Support is soliciting quotes for the procurement of 55 stationary urinals under solicitation number SPE8E826T5410. This requirement is designated as a total small business set aside under NAICS code 332913. The approved source for this item is 47WD8 7250150, and delivery is required to DLA Distribution within 336 days after receipt of order. Interested parties must submit their quotes electronically by the deadline of September 14, 2026. The solicitation is available exclusively online, and no hard copies or separate technical drawings are provided. All inquiries should be directed to the buyer via the DIBBS portal or the provided email contact.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-273H

Solicitation SPE7MC-26-T-273H is a request for quotations issued by DLA Distribution San Joaquin for the procurement of 15 units of a drain cock, identified by NSN 4820-01-162-5097. The item is a critical application component made of copper alloy and requires a metal casting process for manufacture, which necessitates specific tooling. The procurement is categorized under NAICS 332913 and is managed by the DLA Land and Maritime office. Delivery is required within 164 days after the order, with the shipping point set as FOB Origin and both inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 for marking. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Offerors must submit quotes via the DIBBS system and comply with various federal regulations, including the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity standards. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Solicitation # 2031ZA26Q00158

Solicitation 2031ZA26Q00158 is a small business set-aside issued by the Office of the Chief Procurement Officer within the Department of the Treasury for the Bureau of Engraving and Printing. The objective of this acquisition is to purchase two cast steel 300 lb flange 6 inch reducing valves, specifically BEP Part Number 2P0014089, featuring a stellite seat and disc with a range of 10-100 PSI without pilots. The procurement is classified under NAICS code 332913 and is governed by commercial product clauses FAR 52.212-1 and 52.212-2. The government will utilize the Lowest Price Technically Acceptable (LPTA) source selection process to award a firm fixed price contract. To be considered, quoters must be registered in the System for Award Management and provide their DUNS or CAGE code. Technical evaluations will be based on how closely the proposed items match the BEP requirements, with ratings of acceptable or unacceptable. Quoters must submit a single quotation via email to William Corley II that includes full technical specifications, firm fixed pricing in U.S. Dollars inclusive of shipping, and an estimated delivery date. Delivery is specified as FOB Destination in Washington, DC.

Office Of The Chief Procurement Officer

POSTED

DEADLINE

Supply of Drain CocksThis subcontract involves the supply of 131 units of Drain Cocks, identified by NSN 4820013372027, to support prime contractors delivering DLA Land and Maritime supply contracts. The provider is responsible for manufacturing or sourcing parts that strictly adhere to the specified NSN technical requirements. All items must be packaged according to MIL-STD-2073-1E and RP001 standards, with shipments marked in accordance with MIL-STD-129. The final delivery of the 131 units is designated for the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-263S

This solicitation, identified as SPE7MC-26-T-263S, is a request for quotations issued by the Department of Defense DLA Land and Maritime for the procurement of 131 units of drain cocks. The item is classified as a critical application item with NSN 4820-01-337-2027 and is associated with Oshkosh Defense LLC part number 1704860 and Circor Aerospace, Inc. part number HV22-29. The contract falls under NAICS code 332913 and requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement specifies a delivery window of 168 days after the order, with an original required delivery date of March 3, 2027. Technical and quality requirements are governed by the DLA Master List, and packaging must adhere to MIL-STD-2073-1E and RP001 standards, with marking following MIL-STD-129. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. Quotes must be submitted via the DIBBS system by September 21, 2026, and must comply with the Buy American Act and Berry Amendment regulations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Plumbing Fixtures and Piping SuppliesThis subcontract for Plumbing Fixtures and Piping Supplies involves providing commercial-grade plumbing materials to prime contractors for California Department of State Hospitals facility projects. The scope of work includes the delivery of pipes, fittings, valves, and fixtures specifically for laundry facilities, kitchens, and restrooms. All supplied materials must strictly adhere to the California Plumbing Code and the California Building Standards Code Title 24. The project is based in Los Angeles and is managed by the California Department of State Hospitals. Interested parties must submit their responses by October 14, 2026, following the posting date of September 9, 2026. The contract falls under NAICS code 332913 and is accessible through the Cal eProcure portal.

California Department of State Hospitals

POSTED

DEADLINE

Plumbing Supplies and Materials ProviderThis subcontract opportunity is for a Plumbing Supplies and Materials Provider to support prime contractors on projects for the Housing Authority of the City of Milwaukee. The selected provider will be responsible for sourcing and delivering a comprehensive range of pipes, valves, fittings, and fixtures for gas, domestic water, and drainage or vent systems. All supplied materials must strictly adhere to plumbing industry standards as well as all applicable state, county, and city codes. The contract emphasizes the delivery of compliant materials directly to project sites or the prime contractor, with a preference for EBE certified entities. Interested parties must submit their responses by September 25, 2026, in accordance with the solicitation posted on September 9, 2026.

Housing Authority City of Milwaukee

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-253A

Contract SPE7MC-26-T-253A is a solicitation issued by the Department of Defense DLA Land and Maritime for the procurement of air reservoir drain cocks, identified by NSN 4820-01-167-1698. The requirement consists of two line items totaling 171 units, with 32 units destined for DLA Distribution Albany in Georgia and 139 units destined for DLA Distribution San Joaquin in California. The items are identified as critical application items and are associated with Bendix Commercial Vehicle Systems LLC part numbers 276068 C-3 Option A and 276068N. The contract specifies a delivery timeframe of 67 days after the order is placed, with an original required delivery date of January 5, 2026. Quality assurance is governed by destination inspection and acceptance, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements RP001. The solicitation was posted on September 9, 2026, with a response deadline of September 21, 2026, under NAICS code 332913.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Supply of 304 Stainless Steel Round BarsThis subcontract involves the supply of cold-drawn or rolled 304 grade stainless steel round bars for prime contractors operating at the DDSP New Cumberland Facility. The requirement specifies 0.375 inch diameter bars provided in lengths of 8 to 16 feet, totaling 241 feet of material. The contractor is responsible for delivering the physical metal bars along with a mandatory Certificate of Quality Compliance, also known as Mill-Material Certification, for every shipment. This procurement is managed under NAICS code 423440 for the Department of Defense, with performance taking place in New Cumberland.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Carbon Steel Rolled Round Bar SupplyThis subcontract involves the supply of carbon steel rolled round bars for prime contractors supporting DLA Troop Support Construction and Equipment Metals contracts. The required materials must be 1.525 inches in diameter and 10 to 12 feet in length, adhering to MIL-S-22698C(2) specifications. All products must feature waterproof markings in accordance with MIL-STD-129R(3) and ASTM A700-14, and deliveries must include both the physical bars and Certificates of Quality Compliance. To be eligible, providers must maintain an ABS Surveyor's endorsement, CMMC Level 2 certification, and a QSLM/QSDL listing. The contract is associated with the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Responses to this opportunity are due by September 28, 2026.

Rolling Mill Machinery and Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Extruded Aluminum Alloy 5086-H111 Round BarsThis subcontract involves the supply of 1,782 linear feet of extruded Aluminum Alloy 5086-H111 round bars for prime contractors supporting DLA supply contracts. The required bars must have a 0.500 inch diameter and lengths ranging from 8 to 12 feet, with all deliverables adhering to RP001 packaging and RA001 quality standards. Essential documentation includes Metal Certification CDRLs and DD Form 1423s. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract falls under NAICS code 331221. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must submit responses by the deadline of September 28, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 14 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services, issued by the Department of Defense DDSP New Cumberland Facility, involves providing specialized preservation and packaging for prime contractors on DLA supply contracts. The scope of work requires the application of Preservation Method 10 using specific preservative and cushioning materials within Unit Container D3, with all marking executed according to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The service provider must utilize MIL-SPEC containers and industrial preservatives to deliver unit containers that are fully preserved, marked, and ready for shipment. This opportunity is categorized under NAICS code 488510, with a response deadline of September 28, 2026, and performance taking place in New Cumberland, Pennsylvania.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Manufacture of Compress Crankshaft (NSN 014592232)This subcontract involves the precision manufacture of a compressor crankshaft, identified by NSN 014592232, for prime contractors serving DLA supply contracts. The production process requires the use of CNC and grinding precision machining equipment to ensure the final product meets the DLA Master List of Technical and Quality Requirements. The contractor must adhere to strict regulatory standards, including DFARS 252.223-7008 regarding the prohibition of hexavalent chromium and DFARS 252.225-7048 concerning export controls. This project is managed under the Department of Defense through the DDSP New Cumberland Facility, with a response deadline of September 28, 2026.

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military packaging, marking, and palletization for prime contractors on DLA supply contracts. The service provider is responsible for delivering 33 units packaged and marked for shipment to the DDSP New Cumberland facility. All work must strictly adhere to MIL-STD-129 for markings, MIL-STD-2073-1E for packaging, and RP001 for palletization, with hazardous labels applied according to 29 CFR 1910.1200 when necessary. The contract is managed under NAICS code 488510 for the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline of September 28, 2026.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Supply of NSN 4820-01-416-8522 ComponentsThis subcontract with the Department of Defense involves the supply of 33 units of NSN 4820-01-416-8522 for prime contractors on DLA supply contracts. The selected provider is responsible for manufacturing or sourcing components that strictly adhere to the technical specifications associated with the National Stock Number. To ensure quality and consistency, First Article Units must be maintained at the production facility as a manufacturing standard until all quantities are officially accepted. The contract is associated with NAICS code 325211 and is managed by the DDSP New Cumberland Facility. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

Plastics Material and Resin Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Fluid Valve Stems (NSN 4820017378377)This subcontract involves the manufacture and supply of two precision-machined fluid valve stems identified by NSN 4820017378377 for prime contractors supporting DLA Land and Maritime. The contractor is responsible for ensuring all parts meet strict technical specifications and DLA quality assurance and packaging requirements, with final delivery to the DLA Distribution DDSP New Cumberland Facility. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332911 and is managed by the Department of Defense. Responses are due by September 28, 2026, for performance at the New Cumberland facility in Pennsylvania.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

Military-Spec Packaging and Marking ServicesThis subcontract for Military-Spec Packaging and Marking Services supports prime contractors at the DDSP New Cumberland Facility. The scope of work involves providing specialized preservation, packaging, and marking for valve disks to ensure they are ready for shipment. Technical requirements include the application of Preservation Method AE using Unit Container D3 and Intermediate Container E5, with all marking and labeling executed in strict accordance with MIL-STD-129. The project is associated with NAICS code 339999 and is managed under the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture of Valve Disks (PN 4775887-10)This subcontract involves the manufacture of precision valve disks, specifically part number 4775887-10, for the Department of Defense at the DDSP New Cumberland Facility. The production process requires the use of precision CNC machining to ensure all parts are fabricated in strict accordance with Basic Drawing NR 80064 4775887 Revision NR C and TDP Rev A Gen 2. All finished components must comply with MIL-STD-129 marking requirements and will be delivered FOB Origin. The project falls under NAICS code 332710, with the place of performance located in New Cumberland, Pennsylvania.

POSTED

about 14 hours ago

DEADLINE

DLA Compliant Packaging and ShippingThis subcontract for DLA Compliant Packaging and Shipping, managed by the Department of Defense at the DDSP New Cumberland Facility, involves providing specialized packaging and shipping services for prime contractors. The scope of work requires packing components in strict accordance with RP001 DLA Packaging Requirements for Procurement, utilizing military-grade materials, moisture-barrier bags, and specialized crates to ensure protection against corrosion and damage during transit. The performance of these services will take place in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026, for this opportunity categorized under NAICS code 488991. The primary objective is to deliver properly packaged and labeled components that are fully ready for shipment.

Packing and Crating

POSTED

about 14 hours ago

DEADLINE

Manufacturing of NSN 0135-15-835 ComponentThis subcontract involves the manufacturing of hardware components under NSN 0135-15-835 for prime contractors supporting DLA supply contracts. The work is performed at the DDSP New Cumberland Facility and requires precision metal fabrication and machining using either additive manufacturing or precision CNC tools. All production must adhere to L31 Additive Manufacturing standards from June 2018 as well as RA001 technical and quality requirements. The scope of work includes the removal of Government Identification according to RQ011 and the delivery of finished hardware components. This opportunity falls under NAICS code 332710 and was posted by the Department of Defense. The response deadline for this requirement is September 28, 2026.

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS