Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Law Enforcement Drone Platform Fabrication and Delivery

Active
B27000028State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Law Enforcement is soliciting bids for the fabrication and delivery of six custom platforms designed to support drone docking stations for law enforcement operations on Oahu. Each platform must be constructed per detailed specifications and delivered in two separate shipments—three platforms to each of two distinct locations. The platforms must be lifted and securely mounted onto building rooftops to facilitate drone deployment and retrieval, requiring precise installation procedures. Bidders may submit offers for one or both line items, but all proposals must include written documentation or engineered drawings that fully demonstrate compliance with all technical requirements outlined in the solicitation. Responsiveness and responsibility are mandatory for consideration, with award to be made to the lowest-priced bidder who meets all specifications and demonstrates the capability to perform the work as described. The solicitation, identified as B27000028, was posted on July 7, 2026, with responses due by July 29, 2026. The project falls under the jurisdiction of the Hawaii Department of Law Enforcement, with performance required statewide across Oahu. All inquiries and submissions must be directed to Rawlin Sasamura, the primary point of contact, via the provided email or phone number. Bidders are required to review the full solicitation document LAW 26-SD-07... for complete scope, technical standards, and procedural details prior to submission, as failure to address any requirement will result in non-responsiveness. No set-aside provisions are specified, and the selection process prioritizes compliance, responsibility, and cost-effectiveness.

General Info

Six custom drone docking platforms for Oahu rooftops, two shipments, must comply with strict specs, lowest responsive bid wins.

Agency

Hawaii → Department of Law EnforcementView Agency

NAICS

238190 - Other Foundation, Structure, and Building Exterior ContractorsView NAICS

Place of Performance

HI, US

Set-Aside

NONE

Documents

(4)

Addendum 1 for Drone Platform Fabrication Solicitation

PDFamendment

Skydio Dock for X10 Site Readiness Manual and Specifications

PDFspecifications

IFB NO. LAW 26-SD-07 Drone Platform Fabrication and Delivery

PDFifb

AG-008 103D General Conditions (1.10.23)

PDFgeneral-conditions

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyHawaii → Department of Law Enforcement
Contacts2 people available
OfficeHI, US
Organization / Agency
Hawaii → Department of Law Enforcement
View Agency Profile
Office AddressHI, US
Contacts
Russell Fong

Full Description

Show more
The Department of Law Enforcement is issuing this Invitation for Bid (IFB) to seek qualified bidders to fabricate six individual platforms per the specifications in the attached documents. The six platforms will be required to be transported and delivered to two different locations on Oahu, three platforms per location. All platforms must be lifted and placed on to the roofs of the buildings in order to attach a drone docking station for Law Enforcement support activities. Each location will be separate by Line Item. A bidder may bid on both or individual Line Items. For an offeror to be considered responsible and responsive, the bid must include a written statement and or drawings of work with detailed descriptions to be performed to confirm compliance with all specifications within this IFB and attached documents. Please refer to the included solicitation document (LAW 26-SD-07...) for Scope of Work, specifications and other requirements prior to submitting a bid. Award will go to the lowest most responsive and responsible bidder.

Similar Contracts

Same NAICS industry code

NAICS: 238190
New
Federal
Monument Sign - Natick Soldiers Systems CenterThis solicitation, numbered W911QY-26-R-MONU, is a combined synopsis and request for proposals for the complete removal, construction, installation, and warranty of a single monument sign at the Natick Soldiers Systems Center in Natick, Massachusetts. The acquisition is wholly set aside for small business concerns under the NAICS code 238190, with a size standard of $19 million, and is evaluated using the Lowest Price Technically Acceptable method. The contractor must adhere strictly to all Unified Facilities Criteria, particularly UFC 3-120-01, and is responsible for constructing the concrete platform, connecting utility power lines, performing all necessary landscaping, and conducting full site cleanup. All work must be completed within 120 working days from the Notice to Proceed, with delivery f.o.b. destination to 10 General Green Ave, Natick, MA 01760, and inspection handled by the United States Army Garrison – Natick. The solicitation includes a comprehensive list of FAR and DFARS clauses incorporated by reference or included in full text, covering cybersecurity, supply chain security, labor compliance, ethical business practices, payment procedures, and security requirements specific to defense contracting. Proposals must be submitted electronically by 1600 EST on August 3, 2026, to specified email addresses, and all inquiries must be submitted by July 27, 2026. Offerors must include full technical compliance documentation and precise pricing for all line items, including shipping, and ensure their Unique Entity Identifier and Electronic Funds Transfer details are current in SAM. The Government may use AI tools to assist in reviewing proposals for compliance and risk analysis but retains full decision-making authority for award. Contractors must be registered in SAM, compliant with cybersecurity standards including safeguarding covered defense information, and prohibited from using equipment or services from sanctioned entities such as Kaspersky Lab or ByteDance. Payment will be processed via Wide Area WorkFlow, and the government emphasizes electronic submission and strict adherence to the solicitation’s terms as no written solicitation will be issued separately.
W6QK Acc-Apg Natick

POSTED

about 8 hours ago

DEADLINE

in 16 days
View Details
NAICS: 238190
New
SLED
Oak City Town- Tank RepairThe contract pertains to the repair and coating of three water storage tanks—two steel and one concrete—located at Oak City Town in Utah, under solicitation number RA27-7, with an estimated project value of approximately $900,000 and a duration of 135 days. The work encompasses interior and exterior surface preparation and coating, organized into four distinct schedules, and must be performed in strict compliance with the complete Bidding Documents accessible exclusively through the Jones & DeMille Contractors Portal. All bidders are required to attend a mandatory pre-bid conference on August 5, 2026, at Oak City Town Hall, and failure to do so will result in disqualification. Bids must be submitted electronically via the portal or physically delivered to Jones & DeMille Engineering in Richfield, Utah, no later than 2:00 PM local time on August 14, 2026, with individual files not exceeding 1 GB in size. Questions regarding the solicitation must be submitted in writing to Justin Telfer, Project Engineer, by August 10, 2026, with a courtesy copy to Trasie M. The issuing authority is Oak City Town, represented administratively by Jones & DeMille Engineering, and the place of performance is definitively Oak City, Utah. While the contract does not specify payment details, accounting codes, inspection criteria, or detailed evaluation factors in the available documentation, bidders are cautioned that compliance with the full solicitation package is mandatory, as the Division of Purchasing is not involved and no award information will be posted publicly. No line-item pricing, CLINs, or technical specifications are included in the provided data, and all requirements related to representations, certifications, packaging, and quality standards are contained solely within the official Bidding Documents, which bidders must review in full to ensure eligibility and compliance.
Utah

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 238190
New
SLED
Fence and Fencing Installation ServicesThe Texas Workforce Commission is soliciting competitive bids for the procurement and installation of fencing with automated gate operators at its facility located at 12312 North Mopac Expressway in Austin, Texas. The contract covers all aspects of the fencing project including materials, labor, equipment, and any related services necessary to complete the installation in compliance with specified requirements. Interested vendors must submit their proposals by the deadline of August 4, 2026, at 4:00 PM Central Time, following the formal solicitation process outlined under number 3202600224, which was posted on July 21, 2026. The procurement is categorized under state and local government procurement with no specific set-aside designation, and all work must be performed at the designated Texas location. All communications and submissions related to this solicitation should be directed to Nicole McMurtray, the primary point of contact, via email at vendorproposals@twc.texas.gov or by phone at 512-111-1111. The contract is managed under the Texas SmartBuy portal, and detailed procedural information is available through the provided online link. Vendors are expected to meet all technical, safety, and performance standards required for the installation of automated gate systems and perimeter fencing, ensuring long-term functionality and security for the facility. Proposals will be evaluated based on compliance, cost-effectiveness, experience, and the ability to meet the projected timeline and quality benchmarks.
Texas Workforce Commission

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 238190
New
Federal
Z--Replacement of Kettles 7A & 7BThis contract, solicited under number 140FC126R0028, is a firm-fixed price, combined synopsis and request for proposal issued by the U.S. Fish and Wildlife Service Construction and A/E Team, an office under the Department of the Interior, for the replacement of two concrete pond kettles—7A and 7B—at the Inks Dam National Fish Hatchery in Burnet, Texas. The project requires full demolition of the existing kettles and associated drain and water supply lines, followed by earthwork including excavation, backfill, engineered fill, and slope reshaping, and culminates in the construction of new concrete kettles with retaining walls, new PVC water and drain lines, and installation of aluminum guides, grating, and screen modules. The scope mandates strict adherence to technical specifications including ASTM and ACI standards for concrete, soil classification, and testing, with all field testing required to be performed by a certified independent laboratory and reported to the Contracting Officer’s Technical Representative within 48 hours of completion. The work is governed by a 192-day performance period, with a firm delivery deadline of August 31, 2026, and all labor and materials must comply with applicable federal codes, including Davis-Bacon wage rates for truck drivers and OSHA 29 CFR 1926 for site safety. The procurement is structured as a Total Small Business Set-Aside under FAR 19.5, with offers limited exclusively to HUBZone small business concerns, and requires all offerors to be active and registered in SAM.gov with valid UEI and CAGE codes, free of any exclusions. Proposals must be submitted in three volumes—Technical, Price, and Administrative—each with strict formatting requirements: 8.5” x 11” paper, Arial or Calibri 11-point font, single spacing, one-inch margins, and page numbering, with each volume delivered as a separate PDF without ZIP files. The Technical Volume must demonstrate acceptable approaches to demolition, earthwork, concrete construction, utility installation, sequencing, and site management, while the Price Volume must fully price all CLINs without exception, including mobilization, demolition, excavation, compaction, concrete, piping, and replacement kettles, with the bid total inclusive of subtotal, OH&P, and bonds and insurance. The Administrative Volume requires proof of SAM registration, representations and certifications including compliance with the prohibition on contracting with inverted domestic corporations
Fws Construction & A/e - Bil/disaster

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Hawaii → Department of Law Enforcement

Same awarding agency