This Government Contract opportunity from Arizona was posted on February 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Law Enforcement Vehicle Upfitting Installation

Closed

State & Local

Submission Closed04/09/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811121

New

International

PSO RFP RF-20128-SZ Providing Services for Paint, Graphics and General body Repair works of Dispensing Units, Dustbins and Lube Racks at NVROs in Gujranwala Division

Solicitation # Doc341976522

Pakistan State Oil Company Ltd has issued solicitation number Doc341976522 for the procurement of paint, graphics, and general body repair services for dispensing units, dustbins, and lube racks. These services are to be performed at Non-Company Operated Retail Outlets (NVROs) located within the Gujranwala Division of Pakistan. The solicitation was posted on October 22, 2026, with a response deadline of November 3, 2026. Eligible contractors must demonstrate adequate past relevant experience and sufficient financial capabilities to be considered for the award. All bids must be submitted electronically through the SAP Ariba Portal. Interested bidders who do not possess an Ariba Network ID are required to register via the designated portal and must upload a scanned, signed, and stamped request on their official company letterhead to obtain the necessary tender documents.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

Equipment Warranty ProviderThis subcontract opportunity, titled Equipment Warranty Provider, is issued by MPTAP in Mississippi to secure extended warranty coverage for prime contractors working on Jackson County Solid Waste Department projects. The scope of work focuses specifically on maintaining the chassis and hydraulic loader components of knuckle-boom loader trucks, ensuring that all repair services and parts replacements meet detailed minimum requirements. The selected provider must deliver valid warranty certificates and service contracts for the specified duration of the agreement. Interested parties should note that the solicitation was posted on October 21, 2026, with a response deadline of October 28, 2026, falling under NAICS code 811121.

POSTED

DEADLINE

Automotive Glass Replacement ServicesThis subcontract for Automotive Glass Replacement Services involves the supply and installation of safety glass for prime contractors working on City of New York DCAS light-duty vehicle projects. The scope of work includes the delivery and installation of curved tempered glass, flat tempered glass, and safety plated glass utilizing both .30 and .15 vinyl. All materials must be compliant with National Auto Glass Specifications, and pricing must adhere to NAGS List Price standards. The project is managed by the DCAS Division of Municipal Supply Service and will be performed within New York City.

Dcasdivision Of Municipal Supply Service

POSTED

DEADLINE

Automotive Painting and Refinishing ServicesThis subcontract for Automotive Painting and Refinishing Services involves providing professional painting and surface finishing for prime contractors working on City of New York DCAS vehicle projects. The scope of work includes paint preparation, painting auto body components, wet sanding, buffing, and polishing to ensure all finished components match original equipment manufacturer specifications. Contractors are required to possess a paint booth and spray equipment and must strictly adhere to Mayor's Executive Order No. 113 regarding the use of polystyrene foam while ensuring a high-quality finish free of orange peeling. The project is managed by the DCAS Division of Municipal Supply Service in New York, falling under NAICS code 811121. Interested parties must submit their responses by November 18, 2026, for work to be performed within New York City.

Dcasdivision Of Municipal Supply Service

POSTED

DEADLINE

Collision Repair and Chassis ServicesThis subcontract for Collision Repair and Chassis Services involves performing structural and cosmetic repairs for prime contractors on light-duty vehicle projects for the New York City Department of Citywide Administrative Services. The scope of work includes straightening and replacing automotive body, chassis, and internal components, as well as conducting wheel alignments and pre- and post-repair diagnostic scans. The selected provider is responsible for the final delivery of all restored vehicles. To qualify, contractors must possess a New York State Motor Vehicle Repair Shop Certificate and employ an ASE Master Collision Repair/Refinishing Technician with specialized EV Safety Training. Required facilities must be equipped with diagnostic scanning tools and chassis straightening equipment. The project is based in New York, with a response deadline of November 18, 2026.

Dcasdivision Of Municipal Supply Service

POSTED

DEADLINE

85727B0030-Auto Body and Chassis Repair Services for Queens East (RE-AD)

Solicitation # 85727B0030

The City of New York, through the Department of Citywide Administrative Services, is soliciting a requirement contract for auto body and chassis repair services for light-duty vehicles in the Queens East geographical area. The contract has an estimated value of 2,700,000 dollars for a three-year term, with a single award based on the most favorable price from a responsive and responsible bidder. To qualify, contractors must have at least five years of experience, possess a valid New York State Motor Vehicle Repair Shop Certificate or New Jersey License, and maintain a primary facility within ten drivable miles of the Department of Parks and Recreation Repair Facility at 199-02 Union Turnpike, Queens. The facility must also be capable of accommodating three City vehicles simultaneously. Technical requirements include staffing at least one ASE-certified Master Collision Repair/Refinishing Technician, as well as specific safety training for hybrid and electric vehicles issued within the last three years. The scope of work covers all labor, equipment, and materials necessary to restore vehicles to their pre-incident condition, including diagnostics, paint, and glass replacement. Bidders must comply with various regulatory standards, including Mayor's Executive Order No. 113 regarding polystyrene foam and City Executive Order No. 50 for equal employment opportunity. Administrative requirements include the use of the PASSPort system for invoicing and the maintenance of specific insurance coverages, including 1,000,000 dollars for employers liability, commercial automobile liability, and professional liability.

Dcasdivision Of Municipal Supply Service

POSTED

DEADLINE

Mobile Specialty Vehicle Service and PartsThe Mobile Specialty Vehicle Service and Parts subcontract involves providing essential vehicle services and components for prime contractors working on University of Florida mobile clinic projects. The scope of work includes performing routine vehicle maintenance, repairing custom body components, and supplying necessary replacement parts for both the chassis and specialty body. The contractor is responsible for delivering detailed maintenance reports and ensuring all vehicles are returned in fully functioning condition. This opportunity is categorized under NAICS code 811121 and is associated with the University of Florida. Interested parties should note that the posted date is October 20, 2026, with a response deadline of November 17, 2026. Further details and submission processes can be accessed through the provided SciQuest procurement portal.

University of Florida

POSTED

DEADLINE

Unit 7003 - 2019 HINO

Solicitation # 277

The Jefferson Parish Government is soliciting bids for solicitation number 277 to provide all labor, materials, equipment, and transport necessary to repair a 2019 Hino Washout Truck for the Department of Fleet Management. The primary scope of work requires the complete removal and replacement of the vehicle's cab assembly, which must be color matched. The vehicle is currently located at the Jefferson Parish Fleet Management facility in Jefferson, Louisiana, and interested parties may contact Bruce Vosbein to schedule a vehicle inspection. The contract will be awarded to the lowest responsive and responsible bidder. Awardees must strictly adhere to Jefferson Parish insurance requirements per Resolution No. 136353 or No. 141125, including mandatory coverage for Worker's Compensation, Commercial General Liability, and Business Automobile Liability. Specifically, this project requires Garage Keeper’s Insurance of at least 500,000 dollars per occurrence, though Garage Liability is acceptable in place of Commercial General Liability. The apparent low bidder must provide compliant insurance certificates within ten calendar days of the bid opening, and no work may commence until all insurance evidentiary requirements are met.

Jefferson Parish Government

POSTED

DEADLINE

Ford Lightning upfits for DPH truck

Solicitation # BD-27-1080-OSD09-OSD09-134300

Solicitation BD-27-1080-OSD09-OSD09-134300 is an open market request from the Massachusetts Operational Services Division (OSD09 - OSD OVM) for specialized upfits to an existing 2025 Ford Lightning Pro. The winning vendor is responsible for picking up the vehicle from the OVM Westboro lot, performing the required modifications, and returning it to the same location. The deadline for responses is October 30, 2026. The scope of work includes the installation of all-white front and rear emergency lighting, brake signal tie-ins, amber rear traffic directionals, a light bar with scene lighting, and a Siren/PA system. Interior requirements specify an upgraded communication console featuring a Havis center console, armrest, and cup holders or approved equivalents. Exterior and storage modifications include a prisoner cage, a preferred spray-on bedliner, and a lockable tool box such as the Weatherguard Truck Box H-12729. Additionally, if the vehicle's GVWR exceeds 10,000 lbs, the vendor must comply with 540CMR 4.0 safety standards, including the provision of lateral sideguard devices, convex mirrors, a front crossover mirror, and a backup camera. Bidders must submit their proposals using the provided OVM vendor quote form and specify all lead times from order to delivery.

POSTED

DEADLINE

Washington/Vehicle Mod 2026

Solicitation # Washington/Vehicle Mod 2026

Ability Beyond Barriers, under the Horry County Disabilities and Special Needs Board in South Carolina, is seeking proposals for a specific vehicle modification. The project requires the installation of a BraunAbility Automatic 14-inch Lowered Floor Wheelchair Conversion, and all submitted proposals must strictly adhere to the provided specifications. Interested vendors should contact Chicquita Drakeford for complete bid details and specifications. The solicitation was posted on October 20, 2026, and the deadline for responses is November 6, 2026, at 5:00 PM. Ability Beyond Barriers maintains the right to reject any or all proposals received.

Horry County Disabilities & Special Needs Board

POSTED

DEADLINE

2 (24) Passenger Bus Removal, Labor & Install of Metal Floors 2017/2018 Ford E-450

Solicitation # QQ-130196

Norfolk State University is soliciting bids under solicitation number QQ-130196 for the removal of damaged wood floors and the installation of durable metal floors in two 24-passenger buses, specifically a 2017 and 2018 Ford E-450. The scope of work includes removing the existing wood flooring, welding new braces and supports, installing metal floor panels, and adding a sound barrier to improve acoustics. The selected contractor must provide a warranty covering both parts and labor. A mandatory site visit is scheduled for October 20, 2026, at 10:00 am in Norfolk, Virginia; attendance is required to be eligible for bidding. All inquiries following the site visit must be submitted to Michelle Purkett by 12:00 pm on October 22, 2026. Bidders must submit their proposals via the eVA portal by the deadline of October 30, 2026, at 2:00 pm. Submissions must include the completed work sheet as an attachment, and only the total bid amount should be entered directly into the eVA system.

Norfolk State University

POSTED

DEADLINE

Refurbishing Medical Mobile Unit

Solicitation # AU-2027-0001046

Auburn University is soliciting sealed bids under solicitation number AU-2027-0001046 for the refurbishment of one medical mobile unit. The project is managed by Amanda Hallmark and requires delivery to the College of Nursing in Auburn, Alabama. Bids must be submitted through the Procurement and Business Services Sourcing Event Portal by October 28, 2026, at 10:30 AM CDT. The university will select a proposer based on the best interest of the institution and its facilities, and highly qualified candidates may be asked to provide an oral presentation to a selection committee. The contract includes several strict compliance requirements, including a notarized disclosure statement, certification of Alabama state tax compliance, and adherence to federal immigration laws and E-Verify mandates. Bidders must also certify that they have not been debarred or suspended per FAR guidelines. The successful supplier will be required to indemnify the university and is encouraged to utilize Small Business and Small Disadvantaged business suppliers for any necessary subcontracting. All bids are to be submitted as F.O.B. Destination with freight prepaid and allowed.

Auburn University

POSTED

7 days ago

DEADLINE

in 6 days

General Info

Agency

Arizona → Fleet

NAICS

811121 - Automotive Body, Paint, and Interior Repair and Maintenance

Place of Performance

AZ, USA

Set-Aside

NONE

Documents

This scope was carved out of RFP 26-FLT-01.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Upfitting of County and Sheriff’s Vehicles

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 19

subcontract

Response DeadlineApr 9

Deadline has passed

Submission Closed

04/09/2026, 08:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyArizona → Fleet

ContactsNo contacts available

OfficeN/A

Organization / AgencyArizona → Fleet

Office AddressN/A

ContactsNo contact information available

Full Description

Full installation of law enforcement equipment including light bars, sirens, radios, cameras, consoles, and weapon mounts into police vehicles, with proper wiring routing and hardware mounting.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS