Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

LEAD, ELECTRICAL

Active
SPE4A7-26-T-634VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 22 units of LEAD, ELECTRICAL TERMINAL STRIP, with the NSN 5995-01-722-1565, under solicitation SPE4A7-26-T-634V. The requirement is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a delivery deadline of 128 days after award and a response deadline of August 17, 2026. The solicitation incorporates multiple technical and quality requirements referenced by R and I numbers from the DLA Master List, including packaging standards, inspection and acceptance at origin, physical identification and marking of items, and cybersecurity compliance requiring CMMC Level 2 certification for third-party assessors. Export control restrictions apply due to the presence of technical data governed by either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, whether located domestically or abroad, with DFARS 252.225-7048 applicable. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and explicit authorization from DLA. The place of performance is designated as New Cumberland, PA, with Renee Bynum as the primary point of contact.

General Info

Procure 22 electrical terminal strips, CMMC Level 2 required, ITAR/EAR controlled, delivery in 128 days, New Cumberland, PA.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-634V Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Renee Bynum
contact@example.gov

Full Description

Show more
LEAD,ELECTRICAL
TERMINAL STRIP,GROU
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5995-01-722-1565 Quantity: 22 EA Purchase Request: 7017228011QTY: 22 Delivery: 128 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
Cable Assembly Manufacturing and TestingThe contract requires the manufacture, assembly, and testing of seven military-specification cable assemblies identified by NSN 5995-01-663-4290, fully compliant with Defense Logistics Agency standards. Each unit must meet rigorous performance, quality, and documentation requirements, including full traceability throughout the production process to ensure accountability and adherence to defense specifications. The work is to be performed at the designated place of performance in Tracy, California, with a ZIP code of 95304-5000, and must conform to the North American Industry Classification System code 335931, which pertains to other electrical equipment and components manufacturing. This is a subcontract opportunity posted by the Electrical Devices Division of the Department of Defense, with a response deadline of August 20, 2026, and a posting date of August 9, 2026. All deliverables must be accompanied by complete technical documentation and quality assurance records as mandated by DLA protocols. The awarding agency has not specified a set-aside type, indicating the contract is open to general small business or commercial offers, and the point of contact information is not provided in the available data. The official solicitation can be referenced via the DIBBS portal using the provided link for full details and submission guidelines.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
Supply of Proximity Switch (NSN: 5930014906723)The contract calls for the supply of 34 units of a commercial off-the-shelf proximity switch identified by NSN 5930014906723, which must fully comply with military and federal standards for performance, reliability, and quality. The supplier is responsible for providing complete packaging and labeling in accordance with applicable regulations, ensuring the units are ready for immediate operational use upon receipt. Delivery is required to the Defense Logistics Agency location in San Diego, specifically at the zip code 92136-3581, with all logistics and documentation handling falling under the vendor’s obligations. This is a small business set-aside contract under the SBA program, exclusively available to small businesses as defined by the North American Industry Classification System code 335931, which covers other electrical equipment and component manufacturing. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026. The contracting activity is managed by the Electrical Devices Division under the Department of Defense, and while no point of contact is listed, the full details and submission requirements are accessible via the provided DIBBS portal link. The contract is structured as a subcontract and requires full adherence to federal acquisition regulations governing delivery, compliance, and small business participation.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6183
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-082-0297, with a total quantity of 7,597 units to be delivered FOB origin within 220 days of contract award. The item is classified as a critical application item and designated as a commercial product of a type, subject to the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, specifically governed by SAE AS39029 Revision E dated May 1, 2023. Packaging and labeling must comply with MIL-STD-2073-1E and MIL-STD-129, requiring each unit to be marked with the current and most recently superseded part numbers; however, an exception is permitted where only the current required part number must appear on the label. The product is exempt from intentional mercury content except where used in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility, with inspection and acceptance occurring at the destination. The contract enforces a zero percent quantity variance and requires adherence to hazardous materials shipping protocols under IP025. The unit of issue is each (EA), with a total price of $7,597.00, and all documentation and compliance are tied to the referenced DLA procurement procedures and technical directives.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6164
This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 under solicitation SPE7M2-26-T-6164, with a total quantity of 4,846 packages, each containing 100 units, resulting in 484,600 individual terminals. The items are classified as commercial items and are subject to the Qualified Products List or Qualified Manufacturers List requirements, meaning only approved manufacturers may supply them. Technical compliance is governed by SAE AS21004F Revision F and AS7928 Revision C, with configuration changes requiring formal Engineering Change Proposals or variance requests. Mercury or mercury-containing compounds are expressly prohibited from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with additional containment requirements for portable devices containing mercury in accordance with NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E, with marking compliant to MIL-STD-129, no special marking required, and palletization in line with DLA packaging guidelines. Barcoding must conform to ISO/IEC 16388. Delivery is FOB origin with the destination being the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is 158 days after award with a need ship date of January 26, 2027. Inspection and acceptance occur at destination with zero variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for applicable R and I numbers, and transportation details are governed by DLAD procedures C19 and C20.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
PROTECTOR, ELECTRICA
Solicitation # SPE4A7-26-T-633H
The contract covers the procurement of 20 feet of PROTECTOR, ELECTRICA, identified by NSN 5975-01-646-0586 and part number 50-107-B05T, under solicitation SPE4A7-26-T-633H, with a required delivery date of August 1, 2026, and a five-day delivery window from origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 for DLA procurement, with hazardous materials handled per FED-STD-313 and TQ requirement IP025, while non-hazardous items must be commercially packaged. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Physical labeling and marking of items must adhere to RQ017 requirements, and shipment must be sent by the fastest traceable means, not parcel post, to the designated military address in Jacksonville, NC. The unit of issue is feet, with a permitted quantity variance of plus 10 percent and minus zero percent, inspection and acceptance occur at destination, and all packaging and palletization must meet DLA standards. The contract is managed under a federal procurement framework with point of contact Isaiah Still, and the NAICS code 335931 applies to the supplier classification.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M4-26-T-328H
This contract pertains to the procurement of a pressure switch, part number 211C227-2 with NSN 5930009465398, requiring six units to be delivered within five days of award under solicitation SPE7M4-26-T-328H. The item must comply with source-controlled drawing 78286 65652-09022 and adhere to technical specifications cited in the DLA Master List of Technical and Quality Requirements, with packaging and preservation mandated to meet MIL-DTL-28786 for switches and packaging per MIL-STD-2073-1E. Marking must conform to MIL-STD-129 with no special marking required, and delivery is FOB origin with zero variance allowed in quantity. The product is subject to CMMC Level 2 self-assessment requirements due to its handling of covered defense information, and surplus materials are not acceptable. The switch is manufactured by Eaton Aerospace LLC under technical data package revision A, and while the drawing lists approved sources, offerors may be eligible to qualify future alternatives by contacting the cognizant design activity. The contract is for delivery to the Government of Israel, Ministry of Defense, at Latzad Metosim, with the freight forwarder identified as G&B Packing Company in Jersey City, NJ. The contract carries special designation codes including IP025 for hazardous materials packaging, DIS002 for government ownership, and PROJ 594 TP 1 with associated tracking identifiers. The required delivery date is February 10, 2026, and the solicitation closed on August 20, 2026, with a unit price of $6.00 per piece totaling $36.00. Compliance extends to all referenced DLA regulations, including the removal of government identification from non-accepted supplies and adherence to unit of issue standards as defined by ANSI X12. The point of contact for the contracting office is Pamela Gay of the DLA Fluid Handling Division, and the procurement is governed by federal acquisition protocols under NAICS code 335931.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6181
This contract is for the procurement of TERMINAL, LUG with NSN 5940-01-054-6295, under solicitation SPE7M2-26-T-6181, requiring 684 packages, where each package contains 100 units. The item is classified as a commercial item and is subject to a Qualified Products List or Qualified Manufacturers List, meaning only approved suppliers may fulfill the contract. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. Configuration changes require formal Engineering Change Proposal or variance requests, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, lights, or weapon systems, with additional containment and safety requirements per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129, no special markings required, and barcoding in accordance with ISO/IEC 16388. The product is designated a Critical Application Item and must meet SAE AS21004F and AS7928 revisions dated 2023 and 2019 respectively, with part number MS21004-4. Delivery is FOB origin with a 151-day lead time, no variance allowed in quantity, and inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is April 6, 2027, with a need ship date of January 19, 2027. Transportation and shipping follow DLA Procurement Notes C19 and C20. The contract is issued by the Department of Defense under the Nuclear Reactor Program, with primary point of contact Vlada Artyemova, and was posted on August 9, 2026, with proposals due by August 20, 2026.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARD
Solicitation # SPE4A6-26-T-14LF
The contract pertains to the procurement of Terminal Boards identified by NSN 5940-01-104-7337 and part numbers 4400-12, 699-GP-12, and CN1041-12, manufactured by MARCO MANUFACTURING CO INC, REGAL BELOIT AMERICA, INC, and NATEL ENGINEERING COMPANY, LLC respectively. A total quantity of 249 units is required, to be delivered FOB origin within 113 days from the date of contract award, with no tolerance for quantity variance. The items are classified as commercial items and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be marked in accordance with RQ017 for physical identification. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, with critical attributes assigned verification level VII and an AQL of 0.1. Inspection and acceptance occur at the destination, with delivery directed to DLA Distribution Depot Hill at Hill AFB, Utah. All units must be palletized and prepared for shipment in compliance with the specified packaging and marking directives, and transportation logistics follow DLAD Proc Notes C19 and C20. The unit of issue is each (EA), and the contract incorporates mandatory technical and quality provisions referenced via R and I numbers from the DLA Master List, accessible via the official DLA website. The solicitation was issued under SPE4A6-26-T-14LF with a response deadline of August 17, 2026, and a required ship date of December 9, 2026, to meet the original delivery deadline of January 2, 2027. The point of contact for inquiries is Emma Garrett of the ASC Commodities Division, Department of Defense. The item falls under NAICS code 335931 and is subject to federal procurement regulations without set-aside designation.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CONTACT ASSEMBLY, EL
Solicitation # SPE7M0-26-T-034X
This contract pertains to the supply of an electrical contact assembly identified by part number 12898-1-28 and NSN 5999-00-234-6912, with a quantity of two units to be delivered within five days of award. The items must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere strictly to DLA Packaging Requirements for Procurement and MIL-STD-129 for marking and labeling, with hazardous materials handled per TQ requirement IP025 if applicable, or commercially packaged in accordance with ASTM D3951 if not hazardous. Mercury and mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses in batteries, fluorescent lights, sensors, weapon systems, or Navy-specified chemical reagents; any exempted mercury-containing portable lamps or instruments must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The shipment must be dispatched via traceable transport methods—parcel post is prohibited—and must be addressed to the Joint Base Anacostia-Bolling facility with the designated government shipping and marking information. The required delivery date is August 6, 2026, and the contract number is SPE7M0-26-T-034X with a unit price of $2.00 per piece and total price of $4.00, subject to zero variance in quantity.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CLAMP, CABLE, ELECTRICAL
Solicitation # SPE7M5-26-T-398C
This contract specifies the procurement of a clamp, cable, electrical connector with NSN 5935-01-570-0460, quantity of 163 units, to be delivered within 165 days under solicitation SPE7M5-26-T-398C. The item is classified as a qualified product requiring compliance with the Qualified Products List for federal stock class 5935 connector assemblies and contacts, and must conform to the technical standard SAE-AS85049 Revision F dated April 1, 2021, with part number M85049/38S9S. Strict prohibitions are in place against the use of Class I ozone-depleting substances and intentional addition of mercury or mercury-containing compounds, except for defined exempted applications such as batteries, fluorescent lights, and specialized instruments, which must meet additional containment requirements per NAVSEA 5100-003D. All packaging and labeling must adhere to MIL-STD-129 and DLA packaging requirements, with hazardous materials handled in accordance with FED-STD-313 and TQ requirement IP025, while non-hazardous items must comply with ASTM D3951, subject to precedence of DLA Master List requirements. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to heightened verification levels. Delivery is FOB origin to DLA Distribution Cherry Point, North Carolina, with no variance allowed in quantity and inspection and acceptance occurring at the destination. The contract mandates adherence to all referenced DLA Master List technical and quality requirements, superseding any conflicting specifications, and requires prior written approval from the contracting officer for any deviations or use of prohibited substances.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
FUSEHOLDER, BLOCK
Solicitation # SPE7M5-26-T-397C
The contract is for the procurement of one fuseholder block with NSN 5920-01-671-8119 under solicitation SPE7M5-26-T-397C, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days to the destination FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with FOB destination terms and no variance allowed in quantity. The item must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using specified packaging methods and codes, and must not be shipped via parcel post. All packaging, marking, and shipping requirements adhere to DLA’s overarching procurement standards, which incorporate referenced technical and quality requirements from the DLA Master List. Transportation must follow DLA procedural notes C19 and C20, utilizing the fastest traceable means with RDD 777 shipment protocols, and vendors are required to use VSM for logistics coordination. The contract mandates that government identification be removed from non-accepted supplies and that all hazardous material handling complies with IP025 standards. The purchase request number is 7017785870, the unit price is $1.00, and total price is $1.00, with the original required delivery date set for August 10, 2026. The contract’s technical and quality specifications are governed by the DLA Master List edition in effect on the solicitation issue date, and delivery must be made to the specified FPO address with all marking and packaging details as defined, including the absence of any special marking codes.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-397M
This contract specifies the procurement of a qualified electrical plug connector under NSN 5935-01-595-9726, governed by military specifications MIL-DTL-38999/26G and MIL-DTL-38999N, with detailed technical compliance required per TDP Rev A Gen 1. The part, identified as D38999/26KD35SA, is subject to strict qualification standards outlined in the Qualified Products List for FSC 5935, and is designated as a critical application item. Manufacturing from Amphenol, Matrix, or Pyle National with lot date codes between July 2006 and June 2016 is explicitly prohibited, regardless of condition, and the government may demand traceability documentation to verify manufacturing origin and date. All materials must adhere to DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards, and must be marked and packaged per MIL-STD-129 and RP001, with hazardous materials handled per FED-STD-313 and TQ requirement IP025. The order quantity is 54 units, to be delivered within 165 days from award to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and zero variance allowed. The unit of issue is each, with total price based on a unit price of $54.00 per unit. Delivery is required by February 2, 2027, with an original required delivery date of January 11, 2027. Inspection and acceptance occur at destination. The solicitation was issued under SPE7M5-26-T-397M, with procurement controlled by DLA’s Active Devices Division, and bids were due by August 20, 2026. The contract references mandatory compliance with DLA packaging, marking, and transportation directives, including DLAD Proc Notes C19 and C20, and requires all packaging to follow palletization standards per RP001.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
ROD ASSY
Solicitation # SPE4A7-26-T-632L
The contract concerns the supply of a ROD ASSY item identified by part number 123LM10192-1 and NSN 5342001610529, with a quantity of three units to be delivered FOB origin within 166 days, targeting a delivery date of January 31, 2027. The item is classified as a commercial item and a critical application item, subject to stringent quality and cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Physical identification and bare item marking must follow RQ017 and MIL-STD-129 specifications, with no special marking required. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using prescribed methods for preservation, wrapping, and containment as detailed in the QUP and packing code U. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and acceptance occurs at origin with no variance permitted in quantity. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, for both parcel post and freight shipping. The unit price is $3.00, resulting in a total contract value of $9.00. The item has no shelf life restriction. The solicitation number SPE4A7-26-T-632L was issued on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 332994, and the contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense. The point of contact is Jessica Gentry, reachable via phone and email. All requirements are governed by DoD standards, and transportation logistics must align with DLAD Proc Notes C19 and C20. The item must be delivered by manufacturers or non-manufacturers who meet tailored higher-level quality requirements and comply with inspection and acceptance provisions at the point of origin.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract pertains to the procurement of seven units of MMR R-T SLED for aircraft, identified by NSN 1680-01-522-5949, under solicitation SPE4A7-26-T-635Q with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, necessitating the contractor to be a certified third-party assessment organization. All supplies must comply with DLA packaging standards and inspection procedures at origin, and any non-accepted items must have government identification removed prior to disposal. The technical data associated with this item is controlled under either ITAR or EAR, restricting access and export to authorized parties only. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and receive formal approval from DLA to handle such data. Foreign nationals, including those employed by U.S. companies or subsidiaries, are included under these restrictions. Distribution is limited to contractors cleared by DLA and compliant with DFARS 252.225-7048. The contract is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact April Reed.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract is for the procurement of three Wiper Plate Assemblies with NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, responding to purchase request 7017011444. The items are subject to stringent technical and quality requirements referenced from the DLA Master List, with compliance tied to the version of the master in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must adhere to DLA standards, and physical identification of the bare item is mandated. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with the item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandated DLA training and questionnaire and received formal approval. The delivery deadline is 103 days after order, with performance location in Tracy, California, 95304-5000. The solicitation opens on August 9, 2026, and closes on August 17, 2026, with Rahsaan Deloney designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FUELING PRO
Solicitation # SPE4A7-26-T-631P
The contract pertains to the procurement of a BRACKET, FUELING PRO with NSN 5342-00-443-5628, for a quantity of 10 units, under solicitation SPE4A7-26-T-631P, with a delivery requirement of 166 days after award. The item must comply with a broad set of technical, quality, and regulatory requirements including CMMC Level 2 certification for the supplier as a third-party assessment organization, adherence to ISO 9001:2015 quality standards, and strict compliance with DLA packaging and inspection protocols. All supplies must be free from intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any such permitted items must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed required DOD training on export-controlled data handling, and have been formally authorized by DLA. The contract incorporates all relevant requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The point of contact for the solicitation is Jessica Gentry of the Department of Defense, and the place of performance is designated as New Cumberland, PA, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A7-26-T-635J
This contract pertains to the procurement of electrical insulation tape designated as a commercial item with a 12-month shelf life, extendable under RS055 requirements. The item is classified as a critical application product and must comply with Technical Data Package Revision B, Gen 3, in accordance with CID A-A-59474D Revision D dated 01/23/2024, with the part number AA59474 TY1 CL4 1W and NSN 5970010124280. All packaging, preservation, and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including special shelf life labeling code 33, and prohibit any mercury or mercury compounds in preservation materials. Packaging must follow DLA’s RP001 requirements, with units delivered in 36-yard rolls, palletized appropriately, and marked for government use with DNO005 as the freight forwarder and DNOX00 as the delivery destination in Kjeller, Norway. The item is supplied in a unit of issue of RO (roll), with a total quantity of two rolls, and delivery is required FOB origin within five days of award, with zero variance permitted in quantity. Inspection and acceptance occur at origin, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications. The solicitation number is SPE4A7-26-T-635J, with a required delivery date of August 12, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with James Sinks as the point of contact.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, ORIFICE, TIP
Solicitation # SPE4A7-26-T-634B
The item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333. Delivery is due within 82 days after award. The solicitation number is SPE4A7-26-T-634B, posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is nya.currie@dla.mil, with phone number 804-279-6982. The item is classified under NAICS code 336413 and is subject to strict export controls under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior written authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire, and received explicit DLA approval, may access the technical information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, CARTR
Solicitation # SPE4A7-26-T-632K
The contract pertains to the procurement of a seal assembly for a cartridge, identified by NSN 1650-00-589-1257 and part number 03211257, with a quantity of 58 units to be delivered FOB origin within 383 days. The item is classified as a critical application component, and no unit identification marking is required per the service customer’s request, though packaging must comply fully with MIL-STD-2073-1E and marking requirements under MIL-STD-129 without special codes. The contract incorporates technical and quality standards referenced from the DLA Master List, including packaging, demilitarization, cybersecurity certification at CMMC Level 2, and configuration change management. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Mercury and its compounds are strictly prohibited in the product except in defined exceptions such as batteries and sensors, with additional containment requirements for portable devices per NAVSEA 5100-003D. A separate first article test line item is included with a quantity of one unit, signaling that the contractor must conduct and submit a test sample as required by FAR 52.209-3; this line carries no separate charge unless otherwise stipulated, and its award is void if waived. All deliveries must be shipped to DLA Distribution San Diego, and the contractor is required to satisfy source approval documentation, inspection at origin, and adherence to tailored quality requirements for both manufacturers and non-manufacturers. The contract does not specify a shelf life, and pricing is fixed at $58.00 per unit for the main line item with no variance allowed in quantity.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A7-26-T-630Z
The contract pertains to the procurement of one Installation Kit, Electronic Equipment with NSN 5895-01-677-7173 and part number 02-2856383-1, to be delivered in a single unit within ten days of contract award, with delivery terms set at FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951, and must be strictly followed. Packaging and marking must comply with MIL-STD-129 and DLA Packaging Requirements, while palletization adheres to RP001 specifications. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Inspection and acceptance occur at the destination, with the delivery point being US Army SSA Powidz AB, Poland, and the freight shipping address matching the delivery location. The contract is governed under solicitation SPE4A7-26-T-630Z, with a required delivery date of August 3, 2026, and the unit of issue is each, with no variance permitted in quantity. Compliance with DLA procedures for transportation, marking, and documentation is mandatory, and the contract includes specific government-use identification codes and contact information for procurement inquiries.
Other Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-631G
The contract pertains to the procurement of five units of a support, structural item identified by NSN 1560-01-544-2830 under solicitation SPE4A7-26-T-631G, with a delivery deadline 124 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicability determined by the type of acquisition and relevant dates. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with specified attributes assigned strict verification levels or AQLs, and unspecified attributes treated as major unless otherwise defined. Zero non-conformances are required in sampling unless the contract states otherwise. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted supplies. Measuring and test equipment must be maintained and calibrated per applicable standards. The item involves components listed on Qualified Products or Manufacturers Lists, requiring compliance with procurement note H02. All special processes must be performed by NADCAP-approved organizations, as indicated on drawing 20145214. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies equally to U.S. entities and their overseas subsidiaries. DFARS 252.225-7048 governs this restriction. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire. Covering defense information is applicable, and non-tailored quality requirements based on SAE AS9100 apply to both manufacturers and non-manufacturers. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance at Tinker AFB, 73145-8000, and primary point of contact is Rekisha Burton.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details