Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LEAD, ELECTRICAL

Active
SPE4A6-26-T-541RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, issued under solicitation number SPE4A6-26-T-541R by the Department of Defense’s ASC Commodities Division, procures 41 units of LEAD, ELECTRICAL with NSN 5995-01-723-2083, sourced from approved suppliers Purvis Systems Inc and General Dynamics Land Systems Inc, both with part number RS2243870. The item is designated as a critical application item and must be delivered FOB origin within 164 days with zero variance in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, intermediate container requirements, and unit packaging codes without special marking. Palletization adheres to DLA packaging standards. Unit of issue is each (EA), and no item unique identification is required per customer request, though DFARS 252.211-7003(c)(1)(i) remains applicable. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contract mandates compliance with CMMC Level 2 as a certified third-party assessment organization and incorporates technical and quality requirements from the DLA Master List. Documentation for source approval requests is required, and government identification must be removed from non-accepted supplies. The contract enforces strict alignment with DLA packaging requirements for procurement and specifies that all marking and packaging meet established military standards. The contracting officer is Chinh Le, and the place of performance is New Cumberland, PA. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026. This is a federal procurement under NAICS code 335931, requiring adherence to all applicable DoD policies and authorized units of issue as defined in official DLA documentation.

General Info

Procures 41 LEAD, ELECTRICAL units FOB origin within 164 days, compliant with MIL-STD and CMMC Level 2.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-541R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
CHINH LE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEAD,ELECTRICAL
LEAD, ELECTRICAL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICATION LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
PURVIS SYSTEMS INC 1W356 P/N RS2243870
GENERAL DYNAMICS LAND SYSTEMS INC. 7W356 P/N RS2243870
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-541R
SECTION B
PR: 7015223451 PRLI: 0001 CONT’D
https://www.dla.mil/Portals/104/Documents/DLMS/eApplications/LogDataAdmin/ UnitofIssueandPurchaseUnit.xlsx
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015223451 0001 EA 41.000
NSN/MATERIAL:5995017232083
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BS OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:032
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SUPPLEMENTAL PACKAGING NSN/Part Number: 5995-01-723-2083 Quantity: 41 EA Purchase Request: 7015223451QTY: 41 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
Cable Assembly Manufacturing and TestingThe contract calls for the full production of control cable assemblies designated as P/N 2600930-001, encompassing all manufacturing steps from wire rope coiling to the secure attachment of connectors, followed by rigorous tension testing at 552 pounds and final inspection. All work must strictly adhere to MIL-STD-1916 and ASQ H1331 quality standards, with an absolute requirement of zero non-conformance tolerance across the entire production batch. This is a subcontract within the Department of Defense procurement framework under NAICS code 335931, initiated by the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026, and the solicitation posted on July 31, 2026. Production and delivery must meet exacting military specifications to ensure reliability and performance under operational conditions.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARD
Solicitation # SPE4A7-26-T-592W
This contract, identified by solicitation number SPE4A7-26-T-592W, is for the procurement of 83 units of a TERMINAL BOARD with NSN 5940-00-242-4603, to be delivered FOB Origin with acceptance occurring at the destination point: DLA Distribution Depot Oklahoma at Tinker AFB. Delivery must be completed within 169 days after award, with an original required delivery date of January 26, 2027, and a need ship date of January 17, 2027. The quantity is fixed with no variance allowed. Packaging must strictly adhere to MIL-STD-2073-1E, specifying unit packaging in a box using cleaning and drying preservation methods without additional preservation or cushioning materials. Marking follows MIL-STD-129 with GS1-compliant barcoding, no special marking required, and all government identification must be removed from non-accepted items. The product is designated a critical application item, and compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, including specific provisions for bare item marking and removal of government identifiers. Mercury or mercury-containing compounds are prohibited unless used in functional components such as batteries, fluorescent lamps, sensors, or weapon systems, with such items requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with a zero non-conformance acceptance criterion unless otherwise specified, and attributes are assigned verification levels of VII for critical, IV for major, and II for minor with corresponding AQLs of 0.1, 1.0, and 4.0 respectively. The contract is governed by multiple Federal Acquisition Regulation clauses including inspection at destination under FAR 52.246-2, changes under FAR 52.243-1, subcontracting for commercial services under FAR 52.244-6, and safeguarding contractor information systems under FAR 52.240-93 with deviation 2026-00038 applied across several clauses. Invoicing must be processed exclusively through Wide Area WorkFlow, and all offerors must comply with the requirement to disclose Unique Entity Identifier and CAGE code information, complete socioeconomic representations including small business, H
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRANCHED
Solicitation # SPE4A6-26-R-XC03
The contract pertains to the procurement of 35 units of a branched wiring harness with NSN 6150-01-569-1729, under solicitation number SPE4A6-26-R-XC03, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 113 days after award, with responses due by August 18, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise defined. Zero non-conformances are required in sampled lots unless the contract permits otherwise. Government identification must be removed from non-accepted supplies, and the manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916 unless restricted by contract terms. Primary point of contact is Lindsey Shank, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 17 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-Q-1245
The contract is for the procurement of 95 units of a branched wiring harness with NSN 6150-01-500-1918 and part number E8CR128-0220 manufactured by RENK AMERICA LLC, under solicitation SPE4A6-26-Q-1245. Delivery is required in 263 days from the award date with a strict quantity variance of plus or minus zero percent. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Inspection and acceptance occur at origin under MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization and packaging follow DLA-specific requirements, and the item is to be shipped to the DLA Distribution facility in New Cumberland, PA. The contract imposes comprehensive quality, cybersecurity, and configuration control obligations, including compliance with CMMC Level 2 Self-Assessment and formal Engineering Change Proposal procedures for any deviation. Measuring and test equipment must be calibrated and documented, and all supplies must be physically identified per RQ017. Documentation for source approval is mandatory, and covered defense information applies under RD002. Surplus materials are not acceptable, and government identification must be removed from non-accepted items. The acquisition is a total small business set-aside, with no item unique identification required by the service customer. The contract explicitly references DLA packaging standards, transportation protocols, and unit of issue guidelines, with the purchasing activity responsible for logistics coordination under DLAD procedural notes C19 and C20. The delivery is scheduled for February 16, 2027, with a primary point of contact at DLA for procurement inquiries.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-Q-0805
The item is an adapter connector with NSN 5935-01-471-9077, totaling 91 units under purchase request 7017601636, with a delivery timeline of 121 days ADO. This technical item contains data subject to U.S. export control regulations, including ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—constitutes an export requiring prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DOD export-controlled data training and questionnaire, and have received formal approval from DLA to handle such data. The solicitation number is SPE7M5-26-Q-0805, posted on July 31, 2026, with responses due by August 15, 2026, under NAICS code 335931. The procurement is managed by the Department of Defense’s Active Devices Division, with performance at Cherry Point, North Carolina, and primary point of contact is Barbara Hoffmann, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, CONTROL
Solicitation # SPE4A7-26-R-0700
This contract specifies the procurement of 40 cable assemblies identified by NSN 1680-01-321-6778 and part number 2600930-001, sourced from multiple qualified suppliers including Transdigm Inc, Lockheed Martin Corp, and Derco Aerospace Inc. The item is classified as a Critical Safety Item and a Critical Application Item, requiring strict adherence to quality and inspection standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation or award date depending on acquisition size. The contract mandates compliance with MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and all attributes are assigned strict verification levels or AQLs. Inspection and acceptance occur at origin, with firm fixed pricing and no variance permitted in quantity. All items must be marked in accordance with MIL-STD-129, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers; protective caps are required for unused receptacles to prevent damage. Packaging must follow MIL-STD-2073-1E and DLA-specific packaging requirements, ensuring wire rope is coiled naturally without bending and connectors are safeguarded from crushing, bending, and corrosion. The contract imposes stringent cybersecurity and quality standards, including SAE AS9100 for manufacturers and CMMC Level 2 self-assessment proof. All waivers or deviations require formal approval from the DSC Contracting Officer. Delivery is required within 195 days after award, with FOB origin terms governing transport responsibilities.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
CABLE ASSEMBLY,SPEC
Solicitation # N0010426QXB98
This contract solicitation under N0010426QXB98 seeks a Firm-Fixed Price procurement for a CABLE ASSEMBLY,SPEC, with mandatory compliance to MIL-STD-130 for item identification and MIL-DTL-19595 for non-magnetic inspection. The requirement is for production lot testing at the Naval Surface Warfare Center in Indian Head, MD, with all units required to be delivered there for 100% testing before shipment to final destination. The contractor must be an authorized distributor of the original manufacturer, providing official documentation of authorization, and all submissions must include detailed pricing, lead time, CAGE codes, profit rate, and a 90-day minimum quote expiration. Electronic submissions must be sent to brian.j.cawley2.civ@us.navy.mil, and all responses must adhere to IUID requirements under DFARS 252.211-7003. The contract includes a unilateral option for the government to increase quantities by up to 100% within 365 days of award under FAR 52.217-6, and the awardee must be capable of fulfilling Buy American requirements and small business subcontracting obligations. Inspection, packaging, and recordkeeping are strictly governed by government specifications, with contractor records retained for one year after final delivery. The place of performance and point of contact is at NAVSUP-WSS in Mechanicsburg, PA, and the response deadline is August 5, 2026. The procurement is exclusively for a domestic source, with no foreign subcontracting permitted unless compliant with Free Trade Agreements and Balance of Payments Program certifications. Documentation referencing MIL-STD and other military specifications must be obtained through official DoD portals, and any use of restricted documents requires compliance with distribution statements. The solicitation explicitly prohibits substitutions without prior written approval and mandates that all materials be marked in accordance with MIL-STD-130. The contractor is personally responsible for conducting all quality assurance inspections, although the government retains the right to perform spot checks. Any design or specification changes must be communicated with a code classification, accompanied by engineering justification, and formal approval must be secured before implementation. Failure to comply with traceability, authorization, or documentation requirements will disqualify a submission.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335931
New
Federal
TERMINAL BLOCK
Solicitation # N0010426QAC96
This contract pertains to the manufacture of a TERMINAL BLOCK under solicitation number N0010426QAC96, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The item is specified by NAVSEA part number 5677143-101 with CAGE code 53711, and the drawing references WABCO part number 282-101 with CAGE code 65996, requiring strict adherence to the technical specifications in Drawing 5677143 REV_A. Delivery is required within 90 days, and all supplies must comply with applicable military standards including MIL-STD-130 for marking, MIL-STD-973 for configuration control, and MIL-STD-2073 for packaging. Government source inspection per FAR 52.246-2 is mandatory, and the contractor retains full responsibility for quality assurance, including maintaining inspection records for 365 days after final delivery. The contract enforces strict compliance with cybersecurity maturity model requirements, small business set-aside conditions, and defense priority rating, while prohibiting unauthorized disclosure of controlled information. Payment and invoicing must follow Wide Area Workflow instructions, with all documentation electronically transmitted and deemed issued upon electronic submission. All contractual documents, including drawings and referenced military specifications, must be obtained through authorized channels such as DODSSP or directly from NAVICP-MECH for restricted or nuclear-related publications. Engineering changes, deviations, and waivers must be formally submitted to the Contracting Officer at the specified address, with original and two copies required. The contracting officer is Jennifer L. Henry, reachable via email and phone, and responses to the solicitation are due by August 21, 2026. The North American Industry Classification System code is 335931, indicating this is for electrical component manufacturing. The contract includes security prohibitions, cybersecurity certifications, and compliance controls tied to national defense priorities, and all materials must be processed under the conditions of a total small business set-aside. Access to technical drawings is available through the beta.SAM.gov portal.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 21 days
View Details
NAICS: 335931
New
SLED
Ground Connector
Solicitation # Z4909
The contract requires the supply of grounding connectors designated as CU GROUND CONNECTOR #4 - 2 TO #4 - 2 CU CABLE, which must fully comply with the latest revision of IEEE Standard 837. Only approved manufacturers and part numbers are acceptable, specifically AMPACTC83747-1 and CONNECT900105, ensuring compatibility and performance under established electrical safety and reliability criteria. The solicitation is issued by Nashville Electric Service in Tennessee under solicitation number Z4909 and is targeted at state, local, and education entities, with performance required in Nashville. The submission deadline for responses is August 5, 2026, at 7:00 PM, following a posting date of July 31, 2026. Procurement inquiries and communications must be directed to Bailey Allen, the primary point of contact, via email at ballen1@nespower.com or phone at 615-747-3724, with additional details accessible through the official vendor portal link provided.
Nashville Electric Service

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 335931
New
DIBBS
Supply of Electrical Connector Plugs (NSN: 5935007307325)The contract requires the manufacture, packaging, labeling, and delivery of 11,000 units of military-spec electrical connector plugs with NSN 5935007307325 to DLA Distribution in San Joaquin, California. All work must strictly adhere to MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking and labeling of military shipments, and additional DLA packaging standards to ensure full compliance with defense logistics requirements. The deliverables are to be shipped to Tracy, California, with the ZIP code 95304-5000 designated as the place of performance. The contract is classified as a subcontract under NAICS code 335931, which pertains to other electrical equipment and components manufacturing. The solicitation was posted on July 30, 2026, with a firm deadline for response on August 10, 2026. The contracting activity is managed by the Active Devices Division under the Department of Defense.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
RF Cable Assembly ManufacturingThe contract requires the manufacture of five radio frequency cable assemblies compliant with military specifications, encompassing full lifecycle support from design validation and component sourcing through assembly, rigorous testing, and final delivery. Each assembly must adhere to stringent electrical, mechanical, and environmental standards appropriate for defense applications, ensuring reliability under extreme operational conditions. The work is scoped as a subcontract under NAICS code 335931, with performance required at Tracy, California, in the 95304-5000 zip area. Proposals must be submitted by August 7, 2026, following a solicitation posted on July 30, 2026, and the award will be managed by the ASC Commodities Division within the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335931
New
DIBBS
Bracket Assembly with Wiring Harness Manufacturing
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541380
New
DIBBS
Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.
Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

in 19 days
View Details
NAICS: 488510
New
DIBBS
Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.
Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

in 19 days
View Details
NAICS: 323111
New
DIBBS
Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.
Commercial Printing (except Screen and Books)

POSTED

about 14 hours ago

DEADLINE

in 19 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332710
New
DIBBS
Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.
Machine Shops

POSTED

about 14 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED
Solicitation # SPE4A6-26-T-09HS
The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-08MV
The contract solicitation SPE4A6-26-T-08MV pertains to the procurement of a sleeve bearing with NSN 3120012860906, Quantity: 4 units, under a fixed-price delivery order. Delivery is required within 171 days after award, with FOB Origin terms, meaning title and risk transfer to the government upon delivery to the carrier at the contractor’s location. The sole approved sources are Kamatics Corporation and Roller Bearing Company of America, with specific part numbers mandated for compliance, and tooling or casting/forging may be required in manufacturing, for which contractors must seek assistance through DLA’s specialized forging and casting support channels if not already equipped. Packaging and preservation must fully comply with MIL-STD-2073-1E, using preservation method 33, clean and dry condition, preservation material 49, and wrapping material EA, with intermediate and unit containers coded E5 and packaging code U. Marking requirements adhere strictly to MIL-STD-129, with no special marking codes applied, and bare item identification must be present per RQ017. Inspection and acceptance occur at origin, governed by FAR 52.246-2, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in the sample lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Quality assurance systems must align with SAE AS9003 or ISO 9001 tailored to AS9003. The offeror must hold a valid UEI and CAGE code and represent its small business status if claiming socioeconomic status such as WOSB, EDWOSB, SDVOSB, or HUBZone, and must provide UEIs for all joint venture partners if applicable. Invoicing is exclusively required through WAWF, and electronic submission of proposals is mandatory via DIBBS by the deadline of August 5, 2026. Compliance with multiple DFARS clauses is enforced, including safeguarding covered defense information (252.204-7012), prohibition of hexavalent chromium (252.223-7008), export control (
Support Activities for Coal Mining

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-04MJ
The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-09HR
The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-08RR
The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, THREAD
Solicitation # SPE4A6-26-T-02AQ
The contract is for the procurement of 30 straight threaded pins identified by the NSN 5315-01-424-1861 under solicitation number SPE4A6-26-T-02AQ, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline of July 8, 2026, and is classified as a federal procurement under NAICS code 339993 which pertains to other miscellaneous fabricated metal product manufacturing. The place of performance and specific office address details are not provided, and no set-aside provisions are indicated, meaning the opportunity is open to all eligible contractors. The solicitation is accessible through the DIBBS system for potential vendors seeking to respond to the requirement.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-09KV
The contract solicits ten bushings, sleeves with NSN 3120010145565, sourced exclusively from the approved manufacturer Boeing under CAGE 81205 and part number 66-29042, designated as a critical application item requiring adherence to the Technical Data Package Revision A General 1 per reference QAP 13873 QAP-B02 Revision NR B dated 12/11/2013. Delivery is required within 20 days after award to Prince Sultan Air Base in Al Kharj, Saudi Arabia, under FOB Origin terms, with no variance permitted in quantity. All items must be packaged in accordance with MIL-STD-2073-1E, using QUP 001, preservation method 31, clean/dry condition 1, and no preservation material; packaging level is B with packaging code Q and unit container BL, intermediate container E5, and outer packaging indicator M. Marking must strictly conform to MIL-STD-129 with no special marking code applied, and palletization must meet DLA packaging requirements. Inspection and acceptance occur at origin, contingent upon compliance with FAR 52.246-2 and quality systems aligned with SAE AS9003 or ISO 9001 as tailored to AS9003. The contract incorporates numerous FAR and DFARS clauses governing cybersecurity, safety of covered defense information, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, whistleblower rights, subcontracting, and safeguarding government information, including specific compliance with NIST SP 800-171 and DFARS 252.204-7012. Offerors must certify their entity status via Unique Entity ID and CAGE code per DFARS 252.204-7017, disclose any covered defense telecommunications equipment or services, and submit Safety Data Sheets and hazard warning labels for all applicable hazardous materials under 29 CFR 1910.1200 and Federal Standard No. 313, unless exempt under specified federal statutes. Proposals must be submitted electronically via DIBBS by the deadline of July 31, 2026, and all invoicing must follow the WAWF system. The contract does not specify unit prices, total value, or award methodology, and it includes no option quantities
Ball and Roller Bearing Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details